[PATCH 11/11] drm/i915: Hook PSR functionality

[Rodrigo Vivi <rodrigo.vivi@gmail.com>]

PSR must be enabled after transcoder and port are running.
And it is only available for HSW.

v2: move enable/disable to intel_ddi
v3: The spec suggests PSR should be disabled even before backlight (by pzanoni)
v4: also disabling and enabling whenever panel is disabled/enabled.
v5: make it last patch to avoid breaking whenever bisecting. So calling for
    update and force exit came to this patch along with enable/disable calls.

CC: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
---
 drivers/gpu/drm/i915/i915_gem.c      | 2 ++
 drivers/gpu/drm/i915/intel_ddi.c     | 2 ++
 drivers/gpu/drm/i915/intel_display.c | 1 +
 drivers/gpu/drm/i915/intel_dp.c      | 2 ++
 4 files changed, 7 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index c68b90f..f2e135b 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -3786,6 +3786,8 @@ i915_gem_busy_ioctl(struct drm_device *dev, void *data,
 		goto unlock;
 	}
 
+	intel_edp_psr_force_exit(dev);
+
 	/* Count all active objects as busy, even if they are currently not used
 	 * by the gpu. Users of this interface expect objects to eventually
 	 * become non-busy without any further actions, therefore emit any
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 324211a..4211925 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -1117,6 +1117,7 @@ static void intel_enable_ddi(struct intel_encoder *intel_encoder)
 			intel_dp_stop_link_train(intel_dp);
 
 		ironlake_edp_backlight_on(intel_dp);
+		intel_edp_psr_enable(intel_dp);
 	}
 
 	if (intel_crtc->eld_vld && type != INTEL_OUTPUT_EDP) {
@@ -1147,6 +1148,7 @@ static void intel_disable_ddi(struct intel_encoder *intel_encoder)
 	if (type == INTEL_OUTPUT_EDP) {
 		struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
 
+		intel_edp_psr_disable(intel_dp);
 		ironlake_edp_backlight_off(intel_dp);
 	}
 }
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 6fafa43..5bbfed0 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2236,6 +2236,7 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
 	}
 
 	intel_update_fbc(dev);
+	intel_edp_psr_update(dev);
 	mutex_unlock(&dev->struct_mutex);
 
 	intel_crtc_update_sarea_pos(crtc, x, y);
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 9986484..019b1ff 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1668,6 +1668,7 @@ static void intel_disable_dp(struct intel_encoder *encoder)
 	/* Make sure the panel is off before trying to change the mode. But also
 	 * ensure that we have vdd while we switch off the panel. */
 	ironlake_edp_panel_vdd_on(intel_dp);
+	intel_edp_psr_disable(intel_dp);
 	ironlake_edp_backlight_off(intel_dp);
 	intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON);
 	ironlake_edp_panel_off(intel_dp);
@@ -1708,6 +1709,7 @@ static void intel_enable_dp(struct intel_encoder *encoder)
 	intel_dp_complete_link_train(intel_dp);
 	intel_dp_stop_link_train(intel_dp);
 	ironlake_edp_backlight_on(intel_dp);
+	intel_edp_psr_enable(intel_dp);
 
 	if (IS_VALLEYVIEW(dev)) {
 		struct intel_digital_port *dport =
-- 
1.8.1.4