From mboxrd@z Thu Jan 1 00:00:00 1970 From: Simon Glass Date: Fri, 28 Jun 2013 00:46:12 -0700 Subject: [U-Boot] [PATCH] bootm: Disable interrupts before loading OS Message-ID: <1372405572-6961-1-git-send-email-sjg@chromium.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de This restores the ordering of interrupt disable to what it what before commit 35fc84fa. It seems that on some archiectures (e.g. PowerPC) the OS is loaded into an interrupt region, which can cause problems if interrupts are still running. Signed-off-by: Simon Glass --- common/cmd_bootm.c | 53 +++++++++++++++++++++++++++-------------------------- 1 file changed, 27 insertions(+), 26 deletions(-) diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index ba0bcd4..e166027 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -504,36 +504,13 @@ static cmd_tbl_t cmd_bootm_sub[] = { }; static int boot_selected_os(int argc, char * const argv[], int state, - bootm_headers_t *images, boot_os_fn *boot_fn, ulong *iflag) + bootm_headers_t *images, boot_os_fn *boot_fn) { if (images->os.type == IH_TYPE_STANDALONE) { /* This may return when 'autostart' is 'no' */ bootm_start_standalone(argc, argv); return 0; } - /* - * We have reached the point of no return: we are going to - * overwrite all exception vector code, so we cannot easily - * recover from any failures any more... - */ - *iflag = disable_interrupts(); -#ifdef CONFIG_NETCONSOLE - /* Stop the ethernet stack if NetConsole could have left it up */ - eth_halt(); -#endif - -#if defined(CONFIG_CMD_USB) - /* - * turn off USB to prevent the host controller from writing to the - * SDRAM while Linux is booting. This could happen (at least for OHCI - * controller), because the HCCA (Host Controller Communication Area) - * lies within the SDRAM and the host controller writes continously to - * this area (as busmaster!). The HccaFrameNumber is for example - * updated every 1 ms within the HCCA structure in SDRAM! For more - * details see the OpenHCI specification. - */ - usb_stop(); -#endif #ifdef CONFIG_SILENT_CONSOLE if (images->os.os == IH_OS_LINUX) fixup_silent_linux(); @@ -595,6 +572,30 @@ static int do_bootm_states(cmd_tbl_t *cmdtp, int flag, int argc, argc = 0; /* consume the args */ } + /* + * We have reached the point of no return: we are going to + * overwrite all exception vector code, so we cannot easily + * recover from any failures any more... + */ + iflag = disable_interrupts(); +#ifdef CONFIG_NETCONSOLE + /* Stop the ethernet stack if NetConsole could have left it up */ + eth_halt(); +#endif + +#if defined(CONFIG_CMD_USB) + /* + * turn off USB to prevent the host controller from writing to the + * SDRAM while Linux is booting. This could happen (at least for OHCI + * controller), because the HCCA (Host Controller Communication Area) + * lies within the SDRAM and the host controller writes continously to + * this area (as busmaster!). The HccaFrameNumber is for example + * updated every 1 ms within the HCCA structure in SDRAM! For more + * details see the OpenHCI specification. + */ + usb_stop(); +#endif + /* Load the OS */ if (!ret && (states & BOOTM_STATE_LOADOS)) { ulong load_end; @@ -654,7 +655,7 @@ static int do_bootm_states(cmd_tbl_t *cmdtp, int flag, int argc, char *cmd_list = getenv("fakegocmd"); ret = boot_selected_os(argc, argv, BOOTM_STATE_OS_FAKE_GO, - images, boot_fn, &iflag); + images, boot_fn); if (!ret && cmd_list) ret = run_command_list(cmd_list, -1, flag); } @@ -662,7 +663,7 @@ static int do_bootm_states(cmd_tbl_t *cmdtp, int flag, int argc, /* Now run the OS! We hope this doesn't return */ if (!ret && (states & BOOTM_STATE_OS_GO)) ret = boot_selected_os(argc, argv, BOOTM_STATE_OS_GO, - images, boot_fn, &iflag); + images, boot_fn); /* Deal with any fallout */ if (ret < 0) { -- 1.8.3