From mboxrd@z Thu Jan  1 00:00:00 1970
From: Justin Waters <justin.waters@timesys.com>
Date: Thu, 11 Jul 2013 09:55:00 -0400
Subject: [U-Boot] [PATCH v2 3/6] am335x_evm: Rework bootcmd to handle two
	MMC devs
In-Reply-To: <1373550903-474-1-git-send-email-justin.waters@timesys.com>
References: <1373550903-474-1-git-send-email-justin.waters@timesys.com>
Message-ID: <1373550903-474-4-git-send-email-justin.waters@timesys.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

The BeagleBone Black can boot from either the MMC card
or eMMC chip on board. We should try both interfaces.

This modification also allows a graceful fallback if
a device exists but boot images are not present on it.

Changes for v2:

* Fix boot partition - it should always show up as mmcblk0p2
* Fix missing FDT load

Signed-off-by: Justin Waters <justin.waters@timesys.com>
---
 include/configs/am335x_evm.h |   42 ++++++++++++++++++++++--------------------
 1 file changed, 22 insertions(+), 20 deletions(-)

diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index ea68b57..0df0e7a 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -128,9 +128,23 @@
 	"loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
 	"loaduimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
 	"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
-	"mmcboot=echo Booting from mmc ...; " \
-		"run mmcargs; " \
-		"bootm ${loadaddr} - ${fdtaddr}\0" \
+	"mmcboot=mmc dev ${mmcdev}; " \
+		"if mmc rescan; then " \
+			"echo SD/MMC found on device ${mmcdev};" \
+			"if run loadbootenv; then " \
+				"echo Loaded environment from ${bootenv};" \
+				"run importbootenv;" \
+			"fi;" \
+			"if test -n $uenvcmd; then " \
+				"echo Running uenvcmd ...;" \
+				"run uenvcmd;" \
+			"fi;" \
+			"if run loaduimage; then " \
+				"run loadfdt;" \
+				"run mmcargs; " \
+				"bootm ${loadaddr} - ${fdtaddr};" \
+			"fi;" \
+		"fi;\0" \
 	"spiboot=echo Booting from spi ...; " \
 		"run spiargs; " \
 		"sf probe ${spibusno}:0; " \
@@ -162,23 +176,11 @@
 
 #define CONFIG_BOOTCOMMAND \
 	"run findfdt; " \
-	"mmc dev ${mmcdev}; if mmc rescan; then " \
-		"echo SD/MMC found on device ${mmcdev};" \
-		"if run loadbootenv; then " \
-			"echo Loaded environment from ${bootenv};" \
-			"run importbootenv;" \
-		"fi;" \
-		"if test -n $uenvcmd; then " \
-			"echo Running uenvcmd ...;" \
-			"run uenvcmd;" \
-		"fi;" \
-		"if run loaduimage; then " \
-			"run loadfdt;" \
-			"run mmcboot;" \
-		"fi;" \
-	"else " \
-		"run nandboot;" \
-	"fi;" \
+	"run mmcboot;" \
+	"setenv mmcdev 1; " \
+	"setenv bootpart 1:2; " \
+	"run mmcboot;" \
+	"run nandboot;"
 
 /* Clock Defines */
 #define V_OSCK				24000000  /* Clock output from T2 */
-- 
1.7.9.6