From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
To: linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: balbi@ti.com, george.cherian@ti.com,
Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Subject: [PATCH 07/16] usb: musb: replace ifndef with ifdef for CONFIG_MUSB_PIO_ONLY
Date: Mon, 22 Jul 2013 20:09:58 +0200 [thread overview]
Message-ID: <1374516607-2705-8-git-send-email-bigeasy@linutronix.de> (raw)
In-Reply-To: <1374516607-2705-1-git-send-email-bigeasy@linutronix.de>
The ifdef reads somehow better than an ifndef
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
---
drivers/usb/musb/musb_dma.h | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/musb/musb_dma.h b/drivers/usb/musb/musb_dma.h
index 1b6b827..8919ce2 100644
--- a/drivers/usb/musb/musb_dma.h
+++ b/drivers/usb/musb/musb_dma.h
@@ -62,10 +62,10 @@ struct musb_hw_ep;
#define DMA_ADDR_INVALID (~(dma_addr_t)0)
-#ifndef CONFIG_MUSB_PIO_ONLY
-#define is_dma_capable() (1)
-#else
+#ifdef CONFIG_MUSB_PIO_ONLY
#define is_dma_capable() (0)
+#else
+#define is_dma_capable() (1)
#endif
#ifdef CONFIG_USB_TI_CPPI_DMA
--
1.8.3.2
next prev parent reply other threads:[~2013-07-22 18:10 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-22 18:09 am33x: multiple instances and dma support, v2 Sebastian Andrzej Siewior
2013-07-22 18:09 ` [PATCH 01/16] usb: musb: dsps: init / shutdown the phy Sebastian Andrzej Siewior
2013-07-25 14:32 ` Felipe Balbi
2013-07-22 18:09 ` [PATCH 02/16] usb: phy: phy-nop: add support for am335x PHY Sebastian Andrzej Siewior
2013-07-25 14:33 ` Felipe Balbi
2013-07-25 14:45 ` Sebastian Andrzej Siewior
2013-07-25 14:54 ` Felipe Balbi
2013-07-22 18:09 ` [PATCH 03/16] usb: musb: dsps: remove the hardcoded phy pieces Sebastian Andrzej Siewior
2013-07-22 18:09 ` [PATCH 04/16] usb: musb: remove ti81xx pieces from musb Sebastian Andrzej Siewior
2013-07-22 18:09 ` [PATCH 05/16] usb: musb: dsps: use proper child nodes Sebastian Andrzej Siewior
2013-07-23 6:46 ` George Cherian
2013-07-23 9:15 ` Sebastian Andrzej Siewior
2013-07-22 18:09 ` [PATCH 06/16] usb: musb: dsps: rename ti81xx_driver_data to am33xx_driver_data Sebastian Andrzej Siewior
2013-07-23 6:04 ` George Cherian
2013-07-23 9:09 ` Sebastian Andrzej Siewior
2013-07-23 9:14 ` George Cherian
[not found] ` <CADYTM3avh7GFTDQW01FnojKZkmL0_hi+=K-VVwCw5peJL2hwTA@mail.gmail.com>
2013-07-23 19:09 ` Bin Liu
2013-07-25 14:41 ` Sebastian Andrzej Siewior
2013-07-25 15:12 ` Bin Liu
2013-07-25 15:16 ` Sebastian Andrzej Siewior
2013-07-25 15:28 ` Bin Liu
2013-07-25 16:11 ` Felipe Balbi
2013-07-26 9:11 ` [PATCH 06/16 => 1/2] " Sebastian Andrzej Siewior
2013-07-26 9:11 ` [PATCH 06/16 => 2/2] usb: musb: dsps: remove EOI access Sebastian Andrzej Siewior
2013-07-25 15:37 ` [PATCH 06/16] usb: musb: dsps: rename ti81xx_driver_data to am33xx_driver_data Felipe Balbi
2013-07-22 18:09 ` Sebastian Andrzej Siewior [this message]
2013-07-22 18:09 ` [PATCH 08/16] usb: musb: dma: merge ->start/stop into create/destroy Sebastian Andrzej Siewior
2013-07-22 18:10 ` [PATCH 09/16] usb: musb: provide empty dma_controller_create() in PIO mode Sebastian Andrzej Siewior
2013-07-22 18:10 ` [PATCH 10/16] usb: musb: remove a few is_dma_capable() in init/exit code Sebastian Andrzej Siewior
2013-07-22 18:10 ` [PATCH 11/16] usb: musb: core: call dma_controller_destroy() in the err path Sebastian Andrzej Siewior
2013-07-22 18:10 ` [PATCH 12/16] usb: musb: unmap reqs in musb_gadget_queue()'s error case Sebastian Andrzej Siewior
2013-07-22 18:10 ` [PATCH 13/16] usb: musb: do not change dev's dma_mask Sebastian Andrzej Siewior
2013-07-22 18:10 ` [PATCH 14/16] usb: musb: dsps: add MUSB_DEVCTL_SESSION back after removal Sebastian Andrzej Siewior
[not found] ` <CADYTM3a5xzs+-VCTeKLGiRjo7JOqOJ5H4EWDACpTMovY5_ooRA@mail.gmail.com>
2013-07-23 17:31 ` Sebastian Andrzej Siewior
2013-07-23 18:55 ` Bin Liu
2013-07-26 15:44 ` Sebastian Andrzej Siewior
2013-07-26 16:31 ` Sebastian Andrzej Siewior
2013-07-26 17:53 ` Bin Liu
2013-07-26 18:17 ` Bin Liu
2013-07-26 18:22 ` Sebastian Andrzej Siewior
2013-07-26 18:29 ` Bin Liu
2013-07-26 19:55 ` Sebastian Andrzej Siewior
2013-07-26 20:15 ` Bin Liu
2013-07-26 20:35 ` Sebastian Andrzej Siewior
2013-07-27 3:07 ` Bin Liu
2013-07-29 16:53 ` Sebastian Andrzej Siewior
2013-07-29 17:26 ` Bin Liu
2013-07-29 17:51 ` Sebastian Andrzej Siewior
2013-07-29 18:41 ` Bin Liu
2013-08-09 16:03 ` [PATCH] usb: musb: am335x: Do not remove the session bin HOST-only mode Sebastian Andrzej Siewior
2013-08-09 20:30 ` Sergei Shtylyov
2013-08-13 7:14 ` Sebastian Andrzej Siewior
2013-08-13 13:03 ` Bin Liu
2013-08-13 13:17 ` Sebastian Andrzej Siewior
2013-08-13 13:33 ` Bin Liu
2013-08-13 13:44 ` Sebastian Andrzej Siewior
2013-08-13 14:01 ` Bin Liu
2013-08-13 14:23 ` Sebastian Andrzej Siewior
2013-08-13 14:32 ` Bin Liu
2013-08-14 18:17 ` Sebastian Andrzej Siewior
2013-08-14 18:43 ` Bin Liu
2013-07-22 18:10 ` [PATCH 15/16] dmaengine: add transfered member to dma_async_tx_descriptor Sebastian Andrzej Siewior
2013-07-22 18:52 ` Sergei Shtylyov
2013-07-23 17:12 ` Sebastian Andrzej Siewior
2013-07-25 14:57 ` Lars-Peter Clausen
2013-07-25 15:12 ` Sebastian Andrzej Siewior
2013-07-25 15:32 ` Lars-Peter Clausen
2013-07-26 9:30 ` Sebastian Andrzej Siewior
2013-07-29 11:39 ` Vinod Koul
2013-07-29 12:33 ` Sebastian Andrzej Siewior
2013-07-22 18:10 ` [PATCH 16/16] usb/musb dma: add cppi41 dma driver Sebastian Andrzej Siewior
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1374516607-2705-8-git-send-email-bigeasy@linutronix.de \
--to=bigeasy@linutronix.de \
--cc=balbi@ti.com \
--cc=george.cherian@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.