All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH V4 0/2] Add suport for internal request (NOP and Query Request)
@ 2013-07-23  7:07 Sujit Reddy Thumma
  2013-07-23  7:07 ` [PATCH V4 1/2] scsi: ufs: Add support for sending NOP OUT UPIU Sujit Reddy Thumma
  2013-07-23  7:07 ` [PATCH V4 2/2] scsi: ufs: Set fDeviceInit flag to initiate device initialization Sujit Reddy Thumma
  0 siblings, 2 replies; 3+ messages in thread
From: Sujit Reddy Thumma @ 2013-07-23  7:07 UTC (permalink / raw)
  To: Vinayak Holikatti, Santosh Y
  Cc: James E.J. Bottomley, linux-scsi, Sujit Reddy Thumma, linux-arm-msm

This patch series replace the previous Query Request and NOP patches:
[PATCH 1/8] scsi: ufs: add support for query
[PATCH 6/8] scsi: ufs: Add support for sending NOP OUT UPIU
[PATCH 7/8] scsi: ufs: Set fDeviceInit flag to initiate device initialization
Major difference -

	Sending the query request via the SCSI vendor specific command can
	cause a deadlock in case the SCSI command queue is blocked and we
	would like to send a query request (for example fDeviceInit in case
	of re-initialization). In addition, usage of a vendor specific SCSI
	command for UFS can cause future conflicts if this vendor specific
	command will be allocated for a different usage.

	The new patch series gets an internal tag for NOP and query requests
	and do not involve the SCSI layer in UFS specific requests transfers.
	This design also resolves the possible deadlock mentioned above.

Changes from v3:
	- Addressed some of the comments by Seungwon Jeon.
	  o Changed return value for ufshcd_wait_for_register().
	  o Function name changes to ufshcd_verify_dev_init().
	  o Bootup allocation for query structures.
	  o Remove overloading of flag_res while polling in fDeviceInit.
Changes from v2:
 	- Rebased on scsi-misc branche (commit 8c0eb596baa5)
	- Minor addition to structure documentation in ufshcd.h
Changes from v1
	- Allocate a tag for device management commands dynamically instead
	  of reserving tag[MAX_QUEUE - 1].
	- Changed the "internal_cmd" naming to "dev_cmd" to avoid confusion
	  with other type of internal commands other than NOP and QUERY.


Dolev Raviv (1):
  scsi: ufs: Set fDeviceInit flag to initiate device initialization

Sujit Reddy Thumma (1):
  scsi: ufs: Add support for sending NOP OUT UPIU

 drivers/scsi/ufs/ufs.h    |  132 +++++++-
 drivers/scsi/ufs/ufshcd.c |  817 +++++++++++++++++++++++++++++++++++++++------
 drivers/scsi/ufs/ufshcd.h |   49 +++-
 drivers/scsi/ufs/ufshci.h |    2 +-
 4 files changed, 879 insertions(+), 121 deletions(-)

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation.

^ permalink raw reply	[flat|nested] 3+ messages in thread

* [PATCH V4 1/2] scsi: ufs: Add support for sending NOP OUT UPIU
  2013-07-23  7:07 [PATCH V4 0/2] Add suport for internal request (NOP and Query Request) Sujit Reddy Thumma
@ 2013-07-23  7:07 ` Sujit Reddy Thumma
  2013-07-23  7:07 ` [PATCH V4 2/2] scsi: ufs: Set fDeviceInit flag to initiate device initialization Sujit Reddy Thumma
  1 sibling, 0 replies; 3+ messages in thread
From: Sujit Reddy Thumma @ 2013-07-23  7:07 UTC (permalink / raw)
  To: Vinayak Holikatti, Santosh Y
  Cc: James E.J. Bottomley, linux-scsi, Sujit Reddy Thumma,
	linux-arm-msm, Dolev Raviv

As part of device initialization sequence, sending NOP OUT UPIU and
waiting for NOP IN UPIU response is mandatory. This confirms that the
device UFS Transport (UTP) layer is functional and the host can configure
the device with further commands. Add support for sending NOP OUT UPIU to
check the device connection path and test whether the UTP layer on the
device side is functional during initialization.

A tag is acquired from the SCSI tag map space in order to send the device
management command. When the tag is acquired by internal command the scsi
command is rejected with host busy flag in order to requeue the request.
To avoid frequent collisions between internal commands and scsi commands
the device management command tag is allocated in the opposite direction
w.r.t block layer tag allocation.

Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org>
Signed-off-by: Dolev Raviv <draviv@codeaurora.org>
---
 drivers/scsi/ufs/ufs.h    |   40 +++-
 drivers/scsi/ufs/ufshcd.c |  585 +++++++++++++++++++++++++++++++++++++--------
 drivers/scsi/ufs/ufshcd.h |   29 ++-
 3 files changed, 539 insertions(+), 115 deletions(-)

diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h
index 139bc06..51b5e3f 100644
--- a/drivers/scsi/ufs/ufs.h
+++ b/drivers/scsi/ufs/ufs.h
@@ -36,10 +36,13 @@
 #ifndef _UFS_H
 #define _UFS_H
 
+#include <linux/mutex.h>
+#include <linux/types.h>
+
 #define MAX_CDB_SIZE	16
 
 #define UPIU_HEADER_DWORD(byte3, byte2, byte1, byte0)\
-			((byte3 << 24) | (byte2 << 16) |\
+			cpu_to_be32((byte3 << 24) | (byte2 << 16) |\
 			 (byte1 << 8) | (byte0))
 
 /*
@@ -73,6 +76,7 @@ enum {
 	UPIU_TRANSACTION_TASK_RSP	= 0x24,
 	UPIU_TRANSACTION_READY_XFER	= 0x31,
 	UPIU_TRANSACTION_QUERY_RSP	= 0x36,
+	UPIU_TRANSACTION_REJECT_UPIU	= 0x3F,
 };
 
 /* UPIU Read/Write flags */
@@ -110,6 +114,12 @@ enum {
 	UPIU_COMMAND_SET_TYPE_QUERY	= 0x2,
 };
 
+/* UTP Transfer Request Command Offset */
+#define UPIU_COMMAND_TYPE_OFFSET	28
+
+/* Offset of the response code in the UPIU header */
+#define UPIU_RSP_CODE_OFFSET		8
+
 enum {
 	MASK_SCSI_STATUS	= 0xFF,
 	MASK_TASK_RESPONSE	= 0xFF00,
@@ -138,26 +148,32 @@ struct utp_upiu_header {
 
 /**
  * struct utp_upiu_cmd - Command UPIU structure
- * @header: UPIU header structure DW-0 to DW-2
  * @data_transfer_len: Data Transfer Length DW-3
  * @cdb: Command Descriptor Block CDB DW-4 to DW-7
  */
 struct utp_upiu_cmd {
-	struct utp_upiu_header header;
 	u32 exp_data_transfer_len;
 	u8 cdb[MAX_CDB_SIZE];
 };
 
 /**
- * struct utp_upiu_rsp - Response UPIU structure
- * @header: UPIU header DW-0 to DW-2
+ * struct utp_upiu_req - general upiu request structure
+ * @header:UPIU header structure DW-0 to DW-2
+ * @sc: fields structure for scsi command DW-3 to DW-7
+ */
+struct utp_upiu_req {
+	struct utp_upiu_header header;
+	struct utp_upiu_cmd sc;
+};
+
+/**
+ * struct utp_cmd_rsp - Response UPIU structure
  * @residual_transfer_count: Residual transfer count DW-3
  * @reserved: Reserved double words DW-4 to DW-7
  * @sense_data_len: Sense data length DW-8 U16
  * @sense_data: Sense data field DW-8 to DW-12
  */
-struct utp_upiu_rsp {
-	struct utp_upiu_header header;
+struct utp_cmd_rsp {
 	u32 residual_transfer_count;
 	u32 reserved[4];
 	u16 sense_data_len;
@@ -165,6 +181,16 @@ struct utp_upiu_rsp {
 };
 
 /**
+ * struct utp_upiu_rsp - general upiu response structure
+ * @header: UPIU header structure DW-0 to DW-2
+ * @sr: fields structure for scsi command DW-3 to DW-12
+ */
+struct utp_upiu_rsp {
+	struct utp_upiu_header header;
+	struct utp_cmd_rsp sr;
+};
+
+/**
  * struct utp_upiu_task_req - Task request UPIU structure
  * @header - UPIU header structure DW0 to DW-2
  * @input_param1: Input parameter 1 DW-3
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index b743bd6..ed20156 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -43,6 +43,11 @@
 /* UIC command timeout, unit: ms */
 #define UIC_CMD_TIMEOUT	500
 
+/* NOP OUT retries waiting for NOP IN response */
+#define NOP_OUT_RETRIES    10
+/* Timeout after 30 msecs if NOP OUT hangs without response */
+#define NOP_OUT_TIMEOUT    30 /* msecs */
+
 enum {
 	UFSHCD_MAX_CHANNEL	= 0,
 	UFSHCD_MAX_ID		= 1,
@@ -71,6 +76,40 @@ enum {
 	INT_AGGR_CONFIG,
 };
 
+/*
+ * ufshcd_wait_for_register - wait for register value to change
+ * @hba - per-adapter interface
+ * @reg - mmio register offset
+ * @mask - mask to apply to read register value
+ * @val - wait condition
+ * @interval_us - polling interval in microsecs
+ * @timeout_ms - timeout in millisecs
+ *
+ * Returns -ETIMEDOUT on error, zero on success
+ */
+static int ufshcd_wait_for_register(struct ufs_hba *hba, u32 reg, u32 mask,
+		u32 val, unsigned long interval_us, unsigned long timeout_ms)
+{
+	int err = 0;
+	unsigned long timeout = jiffies + msecs_to_jiffies(timeout_ms);
+
+	/* ignore bits that we don't intend to wait on */
+	val = val & mask;
+
+	while ((ufshcd_readl(hba, reg) & mask) != val) {
+		/* wakeup within 50us of expiry */
+		usleep_range(interval_us, interval_us + 50);
+
+		if (time_after(jiffies, timeout)) {
+			if ((ufshcd_readl(hba, reg) & mask) != val)
+				err = -ETIMEDOUT;
+			break;
+		}
+	}
+
+	return err;
+}
+
 /**
  * ufshcd_get_intr_mask - Get the interrupt bit mask
  * @hba - Pointer to adapter instance
@@ -191,18 +230,13 @@ static inline int ufshcd_get_uic_cmd_result(struct ufs_hba *hba)
 }
 
 /**
- * ufshcd_is_valid_req_rsp - checks if controller TR response is valid
+ * ufshcd_get_req_rsp - returns the TR response transaction type
  * @ucd_rsp_ptr: pointer to response UPIU
- *
- * This function checks the response UPIU for valid transaction type in
- * response field
- * Returns 0 on success, non-zero on failure
  */
 static inline int
-ufshcd_is_valid_req_rsp(struct utp_upiu_rsp *ucd_rsp_ptr)
+ufshcd_get_req_rsp(struct utp_upiu_rsp *ucd_rsp_ptr)
 {
-	return ((be32_to_cpu(ucd_rsp_ptr->header.dword_0) >> 24) ==
-		 UPIU_TRANSACTION_RESPONSE) ? 0 : DID_ERROR << 16;
+	return be32_to_cpu(ucd_rsp_ptr->header.dword_0) >> 24;
 }
 
 /**
@@ -299,9 +333,9 @@ static inline void ufshcd_copy_sense_data(struct ufshcd_lrb *lrbp)
 {
 	int len;
 	if (lrbp->sense_buffer) {
-		len = be16_to_cpu(lrbp->ucd_rsp_ptr->sense_data_len);
+		len = be16_to_cpu(lrbp->ucd_rsp_ptr->sr.sense_data_len);
 		memcpy(lrbp->sense_buffer,
-			lrbp->ucd_rsp_ptr->sense_data,
+			lrbp->ucd_rsp_ptr->sr.sense_data,
 			min_t(int, len, SCSI_SENSE_BUFFERSIZE));
 	}
 }
@@ -519,76 +553,128 @@ static void ufshcd_disable_intr(struct ufs_hba *hba, u32 intrs)
 }
 
 /**
+ * ufshcd_prepare_req_desc_hdr() - Fills the requests header
+ * descriptor according to request
+ * @lrbp: pointer to local reference block
+ * @upiu_flags: flags required in the header
+ * @cmd_dir: requests data direction
+ */
+static void ufshcd_prepare_req_desc_hdr(struct ufshcd_lrb *lrbp,
+		u32 *upiu_flags, enum dma_data_direction cmd_dir)
+{
+	struct utp_transfer_req_desc *req_desc = lrbp->utr_descriptor_ptr;
+	u32 data_direction;
+	u32 dword_0;
+
+	if (cmd_dir == DMA_FROM_DEVICE) {
+		data_direction = UTP_DEVICE_TO_HOST;
+		*upiu_flags = UPIU_CMD_FLAGS_READ;
+	} else if (cmd_dir == DMA_TO_DEVICE) {
+		data_direction = UTP_HOST_TO_DEVICE;
+		*upiu_flags = UPIU_CMD_FLAGS_WRITE;
+	} else {
+		data_direction = UTP_NO_DATA_TRANSFER;
+		*upiu_flags = UPIU_CMD_FLAGS_NONE;
+	}
+
+	dword_0 = data_direction | (lrbp->command_type
+				<< UPIU_COMMAND_TYPE_OFFSET);
+	if (lrbp->intr_cmd)
+		dword_0 |= UTP_REQ_DESC_INT_CMD;
+
+	/* Transfer request descriptor header fields */
+	req_desc->header.dword_0 = cpu_to_le32(dword_0);
+
+	/*
+	 * assigning invalid value for command status. Controller
+	 * updates OCS on command completion, with the command
+	 * status
+	 */
+	req_desc->header.dword_2 =
+		cpu_to_le32(OCS_INVALID_COMMAND_STATUS);
+}
+
+/**
+ * ufshcd_prepare_utp_scsi_cmd_upiu() - fills the utp_transfer_req_desc,
+ * for scsi commands
+ * @lrbp - local reference block pointer
+ * @upiu_flags - flags
+ */
+static
+void ufshcd_prepare_utp_scsi_cmd_upiu(struct ufshcd_lrb *lrbp, u32 upiu_flags)
+{
+	struct utp_upiu_req *ucd_req_ptr = lrbp->ucd_req_ptr;
+
+	/* command descriptor fields */
+	ucd_req_ptr->header.dword_0 = UPIU_HEADER_DWORD(
+				UPIU_TRANSACTION_COMMAND, upiu_flags,
+				lrbp->lun, lrbp->task_tag);
+	ucd_req_ptr->header.dword_1 = UPIU_HEADER_DWORD(
+				UPIU_COMMAND_SET_TYPE_SCSI, 0, 0, 0);
+
+	/* Total EHS length and Data segment length will be zero */
+	ucd_req_ptr->header.dword_2 = 0;
+
+	ucd_req_ptr->sc.exp_data_transfer_len =
+		cpu_to_be32(lrbp->cmd->sdb.length);
+
+	memcpy(ucd_req_ptr->sc.cdb, lrbp->cmd->cmnd,
+		(min_t(unsigned short, lrbp->cmd->cmd_len, MAX_CDB_SIZE)));
+}
+
+static inline void ufshcd_prepare_utp_nop_upiu(struct ufshcd_lrb *lrbp)
+{
+	struct utp_upiu_req *ucd_req_ptr = lrbp->ucd_req_ptr;
+
+	memset(ucd_req_ptr, 0, sizeof(struct utp_upiu_req));
+
+	/* command descriptor fields */
+	ucd_req_ptr->header.dword_0 =
+		UPIU_HEADER_DWORD(
+			UPIU_TRANSACTION_NOP_OUT, 0, 0, lrbp->task_tag);
+}
+
+/**
  * ufshcd_compose_upiu - form UFS Protocol Information Unit(UPIU)
+ * @hba - per adapter instance
  * @lrb - pointer to local reference block
  */
-static void ufshcd_compose_upiu(struct ufshcd_lrb *lrbp)
+static int ufshcd_compose_upiu(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
 {
-	struct utp_transfer_req_desc *req_desc;
-	struct utp_upiu_cmd *ucd_cmd_ptr;
-	u32 data_direction;
 	u32 upiu_flags;
-
-	ucd_cmd_ptr = lrbp->ucd_cmd_ptr;
-	req_desc = lrbp->utr_descriptor_ptr;
+	int ret = 0;
 
 	switch (lrbp->command_type) {
 	case UTP_CMD_TYPE_SCSI:
-		if (lrbp->cmd->sc_data_direction == DMA_FROM_DEVICE) {
-			data_direction = UTP_DEVICE_TO_HOST;
-			upiu_flags = UPIU_CMD_FLAGS_READ;
-		} else if (lrbp->cmd->sc_data_direction == DMA_TO_DEVICE) {
-			data_direction = UTP_HOST_TO_DEVICE;
-			upiu_flags = UPIU_CMD_FLAGS_WRITE;
+		if (likely(lrbp->cmd)) {
+			ufshcd_prepare_req_desc_hdr(lrbp, &upiu_flags,
+					lrbp->cmd->sc_data_direction);
+			ufshcd_prepare_utp_scsi_cmd_upiu(lrbp, upiu_flags);
 		} else {
-			data_direction = UTP_NO_DATA_TRANSFER;
-			upiu_flags = UPIU_CMD_FLAGS_NONE;
+			ret = -EINVAL;
 		}
-
-		/* Transfer request descriptor header fields */
-		req_desc->header.dword_0 =
-			cpu_to_le32(data_direction | UTP_SCSI_COMMAND);
-
-		/*
-		 * assigning invalid value for command status. Controller
-		 * updates OCS on command completion, with the command
-		 * status
-		 */
-		req_desc->header.dword_2 =
-			cpu_to_le32(OCS_INVALID_COMMAND_STATUS);
-
-		/* command descriptor fields */
-		ucd_cmd_ptr->header.dword_0 =
-			cpu_to_be32(UPIU_HEADER_DWORD(UPIU_TRANSACTION_COMMAND,
-						      upiu_flags,
-						      lrbp->lun,
-						      lrbp->task_tag));
-		ucd_cmd_ptr->header.dword_1 =
-			cpu_to_be32(
-				UPIU_HEADER_DWORD(UPIU_COMMAND_SET_TYPE_SCSI,
-						  0,
-						  0,
-						  0));
-
-		/* Total EHS length and Data segment length will be zero */
-		ucd_cmd_ptr->header.dword_2 = 0;
-
-		ucd_cmd_ptr->exp_data_transfer_len =
-			cpu_to_be32(lrbp->cmd->sdb.length);
-
-		memcpy(ucd_cmd_ptr->cdb,
-		       lrbp->cmd->cmnd,
-		       (min_t(unsigned short,
-			      lrbp->cmd->cmd_len,
-			      MAX_CDB_SIZE)));
 		break;
 	case UTP_CMD_TYPE_DEV_MANAGE:
-		/* For query function implementation */
+		ufshcd_prepare_req_desc_hdr(lrbp, &upiu_flags, DMA_NONE);
+		if (hba->dev_cmd.type == DEV_CMD_TYPE_NOP)
+			ufshcd_prepare_utp_nop_upiu(lrbp);
+		else
+			ret = -EINVAL;
 		break;
 	case UTP_CMD_TYPE_UFS:
 		/* For UFS native command implementation */
+		ret = -ENOTSUPP;
+		dev_err(hba->dev, "%s: UFS native command are not supported\n",
+			__func__);
+		break;
+	default:
+		ret = -ENOTSUPP;
+		dev_err(hba->dev, "%s: unknown command type: 0x%x\n",
+				__func__, lrbp->command_type);
 		break;
 	} /* end of switch */
+
+	return ret;
 }
 
 /**
@@ -615,21 +701,37 @@ static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
 		goto out;
 	}
 
+	/* acquire the tag to make sure device cmds don't use it */
+	if (test_and_set_bit_lock(tag, &hba->lrb_in_use)) {
+		/*
+		 * Dev manage command in progress, requeue the command.
+		 * Requeuing the command helps in cases where the request *may*
+		 * find different tag instead of waiting for dev manage command
+		 * completion.
+		 */
+		err = SCSI_MLQUEUE_HOST_BUSY;
+		goto out;
+	}
+
 	lrbp = &hba->lrb[tag];
 
+	WARN_ON(lrbp->cmd);
 	lrbp->cmd = cmd;
 	lrbp->sense_bufflen = SCSI_SENSE_BUFFERSIZE;
 	lrbp->sense_buffer = cmd->sense_buffer;
 	lrbp->task_tag = tag;
 	lrbp->lun = cmd->device->lun;
-
+	lrbp->intr_cmd = false;
 	lrbp->command_type = UTP_CMD_TYPE_SCSI;
 
 	/* form UPIU before issuing the command */
-	ufshcd_compose_upiu(lrbp);
+	ufshcd_compose_upiu(hba, lrbp);
 	err = ufshcd_map_sg(lrbp);
-	if (err)
+	if (err) {
+		lrbp->cmd = NULL;
+		clear_bit_unlock(tag, &hba->lrb_in_use);
 		goto out;
+	}
 
 	/* issue command to the controller */
 	spin_lock_irqsave(hba->host->host_lock, flags);
@@ -639,6 +741,194 @@ out:
 	return err;
 }
 
+static int ufshcd_compose_dev_cmd(struct ufs_hba *hba,
+		struct ufshcd_lrb *lrbp, enum dev_cmd_type cmd_type, int tag)
+{
+	lrbp->cmd = NULL;
+	lrbp->sense_bufflen = 0;
+	lrbp->sense_buffer = NULL;
+	lrbp->task_tag = tag;
+	lrbp->lun = 0; /* device management cmd is not specific to any LUN */
+	lrbp->command_type = UTP_CMD_TYPE_DEV_MANAGE;
+	lrbp->intr_cmd = true; /* No interrupt aggregation */
+	hba->dev_cmd.type = cmd_type;
+
+	return ufshcd_compose_upiu(hba, lrbp);
+}
+
+static int
+ufshcd_clear_cmd(struct ufs_hba *hba, int tag)
+{
+	int err = 0;
+	unsigned long flags;
+	u32 mask = 1 << tag;
+
+	/* clear outstanding transaction before retry */
+	spin_lock_irqsave(hba->host->host_lock, flags);
+	ufshcd_utrl_clear(hba, tag);
+	spin_unlock_irqrestore(hba->host->host_lock, flags);
+
+	/*
+	 * wait for for h/w to clear corresponding bit in door-bell.
+	 * max. wait is 1 sec.
+	 */
+	err = ufshcd_wait_for_register(hba,
+			REG_UTP_TRANSFER_REQ_DOOR_BELL,
+			mask, ~mask, 1000, 1000);
+
+	return err;
+}
+
+/**
+ * ufshcd_dev_cmd_completion() - handles device management command responses
+ * @hba: per adapter instance
+ * @lrbp: pointer to local reference block
+ */
+static int
+ufshcd_dev_cmd_completion(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
+{
+	int resp;
+	int err = 0;
+
+	resp = ufshcd_get_req_rsp(lrbp->ucd_rsp_ptr);
+
+	switch (resp) {
+	case UPIU_TRANSACTION_NOP_IN:
+		if (hba->dev_cmd.type != DEV_CMD_TYPE_NOP) {
+			err = -EINVAL;
+			dev_err(hba->dev, "%s: unexpected response %x\n",
+					__func__, resp);
+		}
+		break;
+	case UPIU_TRANSACTION_REJECT_UPIU:
+		/* TODO: handle Reject UPIU Response */
+		err = -EPERM;
+		dev_err(hba->dev, "%s: Reject UPIU not fully implemented\n",
+				__func__);
+		break;
+	default:
+		err = -EINVAL;
+		dev_err(hba->dev, "%s: Invalid device management cmd response: %x\n",
+				__func__, resp);
+		break;
+	}
+
+	return err;
+}
+
+static int ufshcd_wait_for_dev_cmd(struct ufs_hba *hba,
+		struct ufshcd_lrb *lrbp, int max_timeout)
+{
+	int err = 0;
+	unsigned long time_left;
+	unsigned long flags;
+
+	time_left = wait_for_completion_timeout(hba->dev_cmd.complete,
+			msecs_to_jiffies(max_timeout));
+
+	spin_lock_irqsave(hba->host->host_lock, flags);
+	hba->dev_cmd.complete = NULL;
+	if (likely(time_left)) {
+		err = ufshcd_get_tr_ocs(lrbp);
+		if (!err)
+			err = ufshcd_dev_cmd_completion(hba, lrbp);
+	}
+	spin_unlock_irqrestore(hba->host->host_lock, flags);
+
+	if (!time_left) {
+		err = -ETIMEDOUT;
+		if (!ufshcd_clear_cmd(hba, lrbp->task_tag))
+			/* sucessfully cleared the command, retry if needed */
+			err = -EAGAIN;
+	}
+
+	return err;
+}
+
+/**
+ * ufshcd_get_dev_cmd_tag - Get device management command tag
+ * @hba: per-adapter instance
+ * @tag: pointer to variable with available slot value
+ *
+ * Get a free slot and lock it until device management command
+ * completes.
+ *
+ * Returns false if free slot is unavailable for locking, else
+ * return true with tag value in @tag.
+ */
+static bool ufshcd_get_dev_cmd_tag(struct ufs_hba *hba, int *tag_out)
+{
+	int tag;
+	bool ret = false;
+	unsigned long tmp;
+
+	if (!tag_out)
+		goto out;
+
+	do {
+		tmp = ~hba->lrb_in_use;
+		tag = find_last_bit(&tmp, hba->nutrs);
+		if (tag >= hba->nutrs)
+			goto out;
+	} while (test_and_set_bit_lock(tag, &hba->lrb_in_use));
+
+	*tag_out = tag;
+	ret = true;
+out:
+	return ret;
+}
+
+static inline void ufshcd_put_dev_cmd_tag(struct ufs_hba *hba, int tag)
+{
+	clear_bit_unlock(tag, &hba->lrb_in_use);
+}
+
+/**
+ * ufshcd_exec_dev_cmd - API for sending device management requests
+ * @hba - UFS hba
+ * @cmd_type - specifies the type (NOP, Query...)
+ * @timeout - time in seconds
+ *
+ * NOTE: There is only one available tag for device management commands. Thus
+ * synchronisation is the responsibilty of the user.
+ */
+static int ufshcd_exec_dev_cmd(struct ufs_hba *hba,
+		enum dev_cmd_type cmd_type, int timeout)
+{
+	struct ufshcd_lrb *lrbp;
+	int err;
+	int tag;
+	struct completion wait;
+	unsigned long flags;
+
+	/*
+	 * Get free slot, sleep if slots are unavailable.
+	 * Even though we use wait_event() which sleeps indefinitely,
+	 * the maximum wait time is bounded by SCSI request timeout.
+	 */
+	wait_event(hba->dev_cmd.tag_wq, ufshcd_get_dev_cmd_tag(hba, &tag));
+
+	init_completion(&wait);
+	lrbp = &hba->lrb[tag];
+	WARN_ON(lrbp->cmd);
+	err = ufshcd_compose_dev_cmd(hba, lrbp, cmd_type, tag);
+	if (unlikely(err))
+		goto out_put_tag;
+
+	hba->dev_cmd.complete = &wait;
+
+	spin_lock_irqsave(hba->host->host_lock, flags);
+	ufshcd_send_command(hba, tag);
+	spin_unlock_irqrestore(hba->host->host_lock, flags);
+
+	err = ufshcd_wait_for_dev_cmd(hba, lrbp, timeout);
+
+out_put_tag:
+	ufshcd_put_dev_cmd_tag(hba, tag);
+	wake_up(&hba->dev_cmd.tag_wq);
+	return err;
+}
+
 /**
  * ufshcd_memory_alloc - allocate memory for host memory space data structures
  * @hba: per adapter instance
@@ -774,8 +1064,8 @@ static void ufshcd_host_memory_configure(struct ufs_hba *hba)
 				cpu_to_le16(ALIGNED_UPIU_SIZE >> 2);
 
 		hba->lrb[i].utr_descriptor_ptr = (utrdlp + i);
-		hba->lrb[i].ucd_cmd_ptr =
-			(struct utp_upiu_cmd *)(cmd_descp + i);
+		hba->lrb[i].ucd_req_ptr =
+			(struct utp_upiu_req *)(cmd_descp + i);
 		hba->lrb[i].ucd_rsp_ptr =
 			(struct utp_upiu_rsp *)cmd_descp[i].response_upiu;
 		hba->lrb[i].ucd_prdt_ptr =
@@ -961,6 +1251,38 @@ out:
 }
 
 /**
+ * ufshcd_verify_dev_init() - Verify device initialization
+ * @hba: per-adapter instance
+ *
+ * Send NOP OUT UPIU and wait for NOP IN response to check whether the
+ * device Transport Protocol (UTP) layer is ready after a reset.
+ * If the UTP layer at the device side is not initialized, it may
+ * not respond with NOP IN UPIU within timeout of %NOP_OUT_TIMEOUT
+ * and we retry sending NOP OUT for %NOP_OUT_RETRIES iterations.
+ */
+static int ufshcd_verify_dev_init(struct ufs_hba *hba)
+{
+	int err = 0;
+	int retries;
+
+	mutex_lock(&hba->dev_cmd.lock);
+	for (retries = NOP_OUT_RETRIES; retries > 0; retries--) {
+		err = ufshcd_exec_dev_cmd(hba, DEV_CMD_TYPE_NOP,
+					       NOP_OUT_TIMEOUT);
+
+		if (!err || err == -ETIMEDOUT)
+			break;
+
+		dev_dbg(hba->dev, "%s: error %d retrying\n", __func__, err);
+	}
+	mutex_unlock(&hba->dev_cmd.lock);
+
+	if (err)
+		dev_err(hba->dev, "%s: NOP OUT failed %d\n", __func__, err);
+	return err;
+}
+
+/**
  * ufshcd_do_reset - reset the host controller
  * @hba: per adapter instance
  *
@@ -986,13 +1308,20 @@ static int ufshcd_do_reset(struct ufs_hba *hba)
 	for (tag = 0; tag < hba->nutrs; tag++) {
 		if (test_bit(tag, &hba->outstanding_reqs)) {
 			lrbp = &hba->lrb[tag];
-			scsi_dma_unmap(lrbp->cmd);
-			lrbp->cmd->result = DID_RESET << 16;
-			lrbp->cmd->scsi_done(lrbp->cmd);
-			lrbp->cmd = NULL;
+			if (lrbp->cmd) {
+				scsi_dma_unmap(lrbp->cmd);
+				lrbp->cmd->result = DID_RESET << 16;
+				lrbp->cmd->scsi_done(lrbp->cmd);
+				lrbp->cmd = NULL;
+				clear_bit_unlock(tag, &hba->lrb_in_use);
+			}
 		}
 	}
 
+	/* complete device management command */
+	if (hba->dev_cmd.complete)
+		complete(hba->dev_cmd.complete);
+
 	/* clear outstanding request/task bit maps */
 	hba->outstanding_reqs = 0;
 	hba->outstanding_tasks = 0;
@@ -1199,27 +1528,36 @@ ufshcd_transfer_rsp_status(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
 
 	switch (ocs) {
 	case OCS_SUCCESS:
+		result = ufshcd_get_req_rsp(lrbp->ucd_rsp_ptr);
 
-		/* check if the returned transfer response is valid */
-		result = ufshcd_is_valid_req_rsp(lrbp->ucd_rsp_ptr);
-		if (result) {
+		switch (result) {
+		case UPIU_TRANSACTION_RESPONSE:
+			/*
+			 * get the response UPIU result to extract
+			 * the SCSI command status
+			 */
+			result = ufshcd_get_rsp_upiu_result(lrbp->ucd_rsp_ptr);
+
+			/*
+			 * get the result based on SCSI status response
+			 * to notify the SCSI midlayer of the command status
+			 */
+			scsi_status = result & MASK_SCSI_STATUS;
+			result = ufshcd_scsi_cmd_status(lrbp, scsi_status);
+			break;
+		case UPIU_TRANSACTION_REJECT_UPIU:
+			/* TODO: handle Reject UPIU Response */
+			result = DID_ERROR << 16;
 			dev_err(hba->dev,
-				"Invalid response = %x\n", result);
+				"Reject UPIU not fully implemented\n");
+			break;
+		default:
+			result = DID_ERROR << 16;
+			dev_err(hba->dev,
+				"Unexpected request response code = %x\n",
+				result);
 			break;
 		}
-
-		/*
-		 * get the response UPIU result to extract
-		 * the SCSI command status
-		 */
-		result = ufshcd_get_rsp_upiu_result(lrbp->ucd_rsp_ptr);
-
-		/*
-		 * get the result based on SCSI status response
-		 * to notify the SCSI midlayer of the command status
-		 */
-		scsi_status = result & MASK_SCSI_STATUS;
-		result = ufshcd_scsi_cmd_status(lrbp, scsi_status);
 		break;
 	case OCS_ABORTED:
 		result |= DID_ABORT << 16;
@@ -1259,28 +1597,40 @@ static void ufshcd_uic_cmd_compl(struct ufs_hba *hba)
  */
 static void ufshcd_transfer_req_compl(struct ufs_hba *hba)
 {
-	struct ufshcd_lrb *lrb;
+	struct ufshcd_lrb *lrbp;
+	struct scsi_cmnd *cmd;
 	unsigned long completed_reqs;
 	u32 tr_doorbell;
 	int result;
 	int index;
+	bool int_aggr_reset = false;
 
-	lrb = hba->lrb;
 	tr_doorbell = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL);
 	completed_reqs = tr_doorbell ^ hba->outstanding_reqs;
 
 	for (index = 0; index < hba->nutrs; index++) {
 		if (test_bit(index, &completed_reqs)) {
+			lrbp = &hba->lrb[index];
+			cmd = lrbp->cmd;
+			/*
+			 * Don't skip resetting interrupt aggregation counters
+			 * if a regular command is present.
+			 */
+			int_aggr_reset |= !lrbp->intr_cmd;
 
-			result = ufshcd_transfer_rsp_status(hba, &lrb[index]);
-
-			if (lrb[index].cmd) {
-				scsi_dma_unmap(lrb[index].cmd);
-				lrb[index].cmd->result = result;
-				lrb[index].cmd->scsi_done(lrb[index].cmd);
-
+			if (cmd) {
+				result = ufshcd_transfer_rsp_status(hba, lrbp);
+				scsi_dma_unmap(cmd);
+				cmd->result = result;
 				/* Mark completed command as NULL in LRB */
-				lrb[index].cmd = NULL;
+				lrbp->cmd = NULL;
+				clear_bit_unlock(index, &hba->lrb_in_use);
+				/* Do not touch lrbp after scsi done */
+				cmd->scsi_done(cmd);
+			} else if (lrbp->command_type ==
+					UTP_CMD_TYPE_DEV_MANAGE) {
+				if (hba->dev_cmd.complete)
+					complete(hba->dev_cmd.complete);
 			}
 		} /* end of if */
 	} /* end of for */
@@ -1288,8 +1638,12 @@ static void ufshcd_transfer_req_compl(struct ufs_hba *hba)
 	/* clear corresponding bits of completed commands */
 	hba->outstanding_reqs ^= completed_reqs;
 
+	/* we might have free'd some tags above */
+	wake_up(&hba->dev_cmd.tag_wq);
+
 	/* Reset interrupt aggregation counters */
-	ufshcd_config_int_aggr(hba, INT_AGGR_RESET);
+	if (int_aggr_reset)
+		ufshcd_config_int_aggr(hba, INT_AGGR_RESET);
 }
 
 /**
@@ -1432,10 +1786,10 @@ ufshcd_issue_tm_cmd(struct ufs_hba *hba,
 	task_req_upiup =
 		(struct utp_upiu_task_req *) task_req_descp->task_req_upiu;
 	task_req_upiup->header.dword_0 =
-		cpu_to_be32(UPIU_HEADER_DWORD(UPIU_TRANSACTION_TASK_REQ, 0,
-					      lrbp->lun, lrbp->task_tag));
+		UPIU_HEADER_DWORD(UPIU_TRANSACTION_TASK_REQ, 0,
+					      lrbp->lun, lrbp->task_tag);
 	task_req_upiup->header.dword_1 =
-	cpu_to_be32(UPIU_HEADER_DWORD(0, tm_function, 0, 0));
+		UPIU_HEADER_DWORD(0, tm_function, 0, 0);
 
 	task_req_upiup->input_param1 = lrbp->lun;
 	task_req_upiup->input_param1 =
@@ -1502,9 +1856,11 @@ static int ufshcd_device_reset(struct scsi_cmnd *cmd)
 			if (hba->lrb[pos].cmd) {
 				scsi_dma_unmap(hba->lrb[pos].cmd);
 				hba->lrb[pos].cmd->result =
-						DID_ABORT << 16;
+					DID_ABORT << 16;
 				hba->lrb[pos].cmd->scsi_done(cmd);
 				hba->lrb[pos].cmd = NULL;
+				clear_bit_unlock(pos, &hba->lrb_in_use);
+				wake_up(&hba->dev_cmd.tag_wq);
 			}
 		}
 	} /* end of for */
@@ -1572,6 +1928,9 @@ static int ufshcd_abort(struct scsi_cmnd *cmd)
 	__clear_bit(tag, &hba->outstanding_reqs);
 	hba->lrb[tag].cmd = NULL;
 	spin_unlock_irqrestore(host->host_lock, flags);
+
+	clear_bit_unlock(tag, &hba->lrb_in_use);
+	wake_up(&hba->dev_cmd.tag_wq);
 out:
 	return err;
 }
@@ -1587,8 +1946,16 @@ static void ufshcd_async_scan(void *data, async_cookie_t cookie)
 	int ret;
 
 	ret = ufshcd_link_startup(hba);
-	if (!ret)
-		scsi_scan_host(hba->host);
+	if (ret)
+		goto out;
+
+	ret = ufshcd_verify_dev_init(hba);
+	if (ret)
+		goto out;
+
+	scsi_scan_host(hba->host);
+out:
+	return;
 }
 
 static struct scsi_host_template ufshcd_driver_template = {
@@ -1744,6 +2111,12 @@ int ufshcd_init(struct device *dev, struct ufs_hba **hba_handle,
 	/* Initialize UIC command mutex */
 	mutex_init(&hba->uic_cmd_mutex);
 
+	/* Initialize mutex for device management commands */
+	mutex_init(&hba->dev_cmd.lock);
+
+	/* Initialize device management tag acquire wait queue */
+	init_waitqueue_head(&hba->dev_cmd.tag_wq);
+
 	/* IRQ registration */
 	err = devm_request_irq(dev, irq, ufshcd_intr, IRQF_SHARED, UFSHCD, hba);
 	if (err) {
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 49590ee..c750a90 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -68,6 +68,10 @@
 #define UFSHCD "ufshcd"
 #define UFSHCD_DRIVER_VERSION "0.2"
 
+enum dev_cmd_type {
+	DEV_CMD_TYPE_NOP		= 0x0,
+};
+
 /**
  * struct uic_command - UIC command structure
  * @command: UIC command
@@ -91,7 +95,7 @@ struct uic_command {
 /**
  * struct ufshcd_lrb - local reference block
  * @utr_descriptor_ptr: UTRD address of the command
- * @ucd_cmd_ptr: UCD address of the command
+ * @ucd_req_ptr: UCD address of the command
  * @ucd_rsp_ptr: Response UPIU address for this command
  * @ucd_prdt_ptr: PRDT address of the command
  * @cmd: pointer to SCSI command
@@ -101,10 +105,11 @@ struct uic_command {
  * @command_type: SCSI, UFS, Query.
  * @task_tag: Task tag of the command
  * @lun: LUN of the command
+ * @intr_cmd: Interrupt command (doesn't participate in interrupt aggregation)
  */
 struct ufshcd_lrb {
 	struct utp_transfer_req_desc *utr_descriptor_ptr;
-	struct utp_upiu_cmd *ucd_cmd_ptr;
+	struct utp_upiu_req *ucd_req_ptr;
 	struct utp_upiu_rsp *ucd_rsp_ptr;
 	struct ufshcd_sg_entry *ucd_prdt_ptr;
 
@@ -116,8 +121,22 @@ struct ufshcd_lrb {
 	int command_type;
 	int task_tag;
 	unsigned int lun;
+	bool intr_cmd;
 };
 
+/**
+ * struct ufs_dev_cmd - all assosiated fields with device management commands
+ * @type: device management command type - Query, NOP OUT
+ * @lock: lock to allow one command at a time
+ * @complete: internal commands completion
+ * @tag_wq: wait queue until free command slot is available
+ */
+struct ufs_dev_cmd {
+	enum dev_cmd_type type;
+	struct mutex lock;
+	struct completion *complete;
+	wait_queue_head_t tag_wq;
+};
 
 /**
  * struct ufs_hba - per adapter private structure
@@ -131,6 +150,7 @@ struct ufshcd_lrb {
  * @host: Scsi_Host instance of the driver
  * @dev: device handle
  * @lrb: local reference block
+ * @lrb_in_use: lrb in use
  * @outstanding_tasks: Bits representing outstanding task requests
  * @outstanding_reqs: Bits representing outstanding transfer requests
  * @capabilities: UFS Controller Capabilities
@@ -146,6 +166,7 @@ struct ufshcd_lrb {
  * @intr_mask: Interrupt Mask Bits
  * @feh_workq: Work queue for fatal controller error handling
  * @errors: HBA errors
+ * @dev_cmd: ufs device management command information
  */
 struct ufs_hba {
 	void __iomem *mmio_base;
@@ -164,6 +185,7 @@ struct ufs_hba {
 	struct device *dev;
 
 	struct ufshcd_lrb *lrb;
+	unsigned long lrb_in_use;
 
 	unsigned long outstanding_tasks;
 	unsigned long outstanding_reqs;
@@ -188,6 +210,9 @@ struct ufs_hba {
 
 	/* HBA Errors */
 	u32 errors;
+
+	/* Device management request data */
+	struct ufs_dev_cmd dev_cmd;
 };
 
 #define ufshcd_writel(hba, val, reg)	\
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation.

^ permalink raw reply related	[flat|nested] 3+ messages in thread

* [PATCH V4 2/2] scsi: ufs: Set fDeviceInit flag to initiate device initialization
  2013-07-23  7:07 [PATCH V4 0/2] Add suport for internal request (NOP and Query Request) Sujit Reddy Thumma
  2013-07-23  7:07 ` [PATCH V4 1/2] scsi: ufs: Add support for sending NOP OUT UPIU Sujit Reddy Thumma
@ 2013-07-23  7:07 ` Sujit Reddy Thumma
  1 sibling, 0 replies; 3+ messages in thread
From: Sujit Reddy Thumma @ 2013-07-23  7:07 UTC (permalink / raw)
  To: Vinayak Holikatti, Santosh Y
  Cc: James E.J. Bottomley, linux-scsi, Dolev Raviv, linux-arm-msm,
	Sujit Reddy Thumma

From: Dolev Raviv <draviv@codeaurora.org>

Allow UFS device to complete its initialization and accept
SCSI commands by setting fDeviceInit flag. The device may take
time for this operation and hence the host should poll until
fDeviceInit flag is toggled to zero. This step is mandated by
UFS device specification for device initialization completion.

Signed-off-by: Dolev Raviv <draviv@codeaurora.org>
Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org>
---
 drivers/scsi/ufs/ufs.h    |   96 +++++++++++++++++--
 drivers/scsi/ufs/ufshcd.c |  238 ++++++++++++++++++++++++++++++++++++++++++++-
 drivers/scsi/ufs/ufshcd.h |   20 ++++
 drivers/scsi/ufs/ufshci.h |    2 +-
 4 files changed, 345 insertions(+), 11 deletions(-)

diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h
index 51b5e3f..50d32f1 100644
--- a/drivers/scsi/ufs/ufs.h
+++ b/drivers/scsi/ufs/ufs.h
@@ -40,6 +40,10 @@
 #include <linux/types.h>
 
 #define MAX_CDB_SIZE	16
+#define GENERAL_UPIU_REQUEST_SIZE 32
+#define QUERY_DESC_MAX_SIZE       256
+#define QUERY_OSF_SIZE            (GENERAL_UPIU_REQUEST_SIZE - \
+					(sizeof(struct utp_upiu_header)))
 
 #define UPIU_HEADER_DWORD(byte3, byte2, byte1, byte0)\
 			cpu_to_be32((byte3 << 24) | (byte2 << 16) |\
@@ -65,7 +69,7 @@ enum {
 	UPIU_TRANSACTION_COMMAND	= 0x01,
 	UPIU_TRANSACTION_DATA_OUT	= 0x02,
 	UPIU_TRANSACTION_TASK_REQ	= 0x04,
-	UPIU_TRANSACTION_QUERY_REQ	= 0x26,
+	UPIU_TRANSACTION_QUERY_REQ	= 0x16,
 };
 
 /* UTP UPIU Transaction Codes Target to Initiator */
@@ -94,8 +98,19 @@ enum {
 	UPIU_TASK_ATTR_ACA	= 0x03,
 };
 
-/* UTP QUERY Transaction Specific Fields OpCode */
+/* UPIU Query request function */
 enum {
+	UPIU_QUERY_FUNC_STANDARD_READ_REQUEST           = 0x01,
+	UPIU_QUERY_FUNC_STANDARD_WRITE_REQUEST          = 0x81,
+};
+
+/* Flag idn for Query Requests*/
+enum flag_idn {
+	QUERY_FLAG_IDN_FDEVICEINIT      = 0x01,
+};
+
+/* UTP QUERY Transaction Specific Fields OpCode */
+enum query_opcode {
 	UPIU_QUERY_OPCODE_NOP		= 0x0,
 	UPIU_QUERY_OPCODE_READ_DESC	= 0x1,
 	UPIU_QUERY_OPCODE_WRITE_DESC	= 0x2,
@@ -107,6 +122,21 @@ enum {
 	UPIU_QUERY_OPCODE_TOGGLE_FLAG	= 0x8,
 };
 
+/* Query response result code */
+enum {
+	QUERY_RESULT_SUCCESS                    = 0x00,
+	QUERY_RESULT_NOT_READABLE               = 0xF6,
+	QUERY_RESULT_NOT_WRITEABLE              = 0xF7,
+	QUERY_RESULT_ALREADY_WRITTEN            = 0xF8,
+	QUERY_RESULT_INVALID_LENGTH             = 0xF9,
+	QUERY_RESULT_INVALID_VALUE              = 0xFA,
+	QUERY_RESULT_INVALID_SELECTOR           = 0xFB,
+	QUERY_RESULT_INVALID_INDEX              = 0xFC,
+	QUERY_RESULT_INVALID_IDN                = 0xFD,
+	QUERY_RESULT_INVALID_OPCODE             = 0xFE,
+	QUERY_RESULT_GENERAL_FAILURE            = 0xFF,
+};
+
 /* UTP Transfer Request Command Type (CT) */
 enum {
 	UPIU_COMMAND_SET_TYPE_SCSI	= 0x0,
@@ -121,9 +151,10 @@ enum {
 #define UPIU_RSP_CODE_OFFSET		8
 
 enum {
-	MASK_SCSI_STATUS	= 0xFF,
-	MASK_TASK_RESPONSE	= 0xFF00,
-	MASK_RSP_UPIU_RESULT	= 0xFFFF,
+	MASK_SCSI_STATUS		= 0xFF,
+	MASK_TASK_RESPONSE              = 0xFF00,
+	MASK_RSP_UPIU_RESULT            = 0xFFFF,
+	MASK_QUERY_DATA_SEG_LEN         = 0xFFFF,
 };
 
 /* Task management service response */
@@ -157,13 +188,40 @@ struct utp_upiu_cmd {
 };
 
 /**
+ * struct utp_upiu_query - upiu request buffer structure for
+ * query request.
+ * @opcode: command to perform B-0
+ * @idn: a value that indicates the particular type of data B-1
+ * @index: Index to further identify data B-2
+ * @selector: Index to further identify data B-3
+ * @reserved_osf: spec reserved field B-4,5
+ * @length: number of descriptor bytes to read/write B-6,7
+ * @value: Attribute value to be written DW-5
+ * @reserved: spec reserved DW-6,7
+ */
+struct utp_upiu_query {
+	u8 opcode;
+	u8 idn;
+	u8 index;
+	u8 selector;
+	u16 reserved_osf;
+	u16 length;
+	u32 value;
+	u32 reserved[2];
+};
+
+/**
  * struct utp_upiu_req - general upiu request structure
  * @header:UPIU header structure DW-0 to DW-2
  * @sc: fields structure for scsi command DW-3 to DW-7
+ * @qr: fields structure for query request DW-3 to DW-7
  */
 struct utp_upiu_req {
 	struct utp_upiu_header header;
-	struct utp_upiu_cmd sc;
+	union {
+		struct utp_upiu_cmd sc;
+		struct utp_upiu_query qr;
+	};
 };
 
 /**
@@ -184,10 +242,14 @@ struct utp_cmd_rsp {
  * struct utp_upiu_rsp - general upiu response structure
  * @header: UPIU header structure DW-0 to DW-2
  * @sr: fields structure for scsi command DW-3 to DW-12
+ * @qr: fields structure for query request DW-3 to DW-7
  */
 struct utp_upiu_rsp {
 	struct utp_upiu_header header;
-	struct utp_cmd_rsp sr;
+	union {
+		struct utp_cmd_rsp sr;
+		struct utp_upiu_query qr;
+	};
 };
 
 /**
@@ -220,4 +282,24 @@ struct utp_upiu_task_rsp {
 	u32 reserved[3];
 };
 
+/**
+ * struct ufs_query_req - parameters for building a query request
+ * @query_func: UPIU header query function
+ * @upiu_req: the query request data
+ */
+struct ufs_query_req {
+	u8 query_func;
+	struct utp_upiu_query upiu_req;
+};
+
+/**
+ * struct ufs_query_resp - UPIU QUERY
+ * @response: device response code
+ * @upiu_res: query response data
+ */
+struct ufs_query_res {
+	u8 response;
+	struct utp_upiu_query upiu_res;
+};
+
 #endif /* End of Header */
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index ed20156..7b581f7 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -48,6 +48,14 @@
 /* Timeout after 30 msecs if NOP OUT hangs without response */
 #define NOP_OUT_TIMEOUT    30 /* msecs */
 
+/* Query request retries */
+#define QUERY_REQ_RETRIES 10
+/* Query request timeout */
+#define QUERY_REQ_TIMEOUT 30 /* msec */
+
+/* Expose the flag value from utp_upiu_query.value */
+#define MASK_QUERY_UPIU_FLAG_LOC 0xFF
+
 enum {
 	UFSHCD_MAX_CHANNEL	= 0,
 	UFSHCD_MAX_ID		= 1,
@@ -341,6 +349,60 @@ static inline void ufshcd_copy_sense_data(struct ufshcd_lrb *lrbp)
 }
 
 /**
+ * ufshcd_query_to_cpu() - formats the buffer to native cpu endian
+ * @response: upiu query response to convert
+ */
+static inline void ufshcd_query_to_cpu(struct utp_upiu_query *response)
+{
+	response->length = be16_to_cpu(response->length);
+	response->value = be32_to_cpu(response->value);
+}
+
+/**
+ * ufshcd_query_to_be() - formats the buffer to big endian
+ * @request: upiu query request to convert
+ */
+static inline void ufshcd_query_to_be(struct utp_upiu_query *request)
+{
+	request->length = cpu_to_be16(request->length);
+	request->value = cpu_to_be32(request->value);
+}
+
+/**
+ * ufshcd_copy_query_response() - Copy the Query Response and the data
+ * descriptor
+ * @hba: per adapter instance
+ * @lrb - pointer to local reference block
+ */
+static
+void ufshcd_copy_query_response(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
+{
+	struct ufs_query_res *query_res = &hba->dev_cmd.query.response;
+
+	/* Get the UPIU response */
+	query_res->response = ufshcd_get_rsp_upiu_result(lrbp->ucd_rsp_ptr) >>
+			UPIU_RSP_CODE_OFFSET;
+
+	memcpy(&query_res->upiu_res, &lrbp->ucd_rsp_ptr->qr, QUERY_OSF_SIZE);
+	ufshcd_query_to_cpu(&query_res->upiu_res);
+
+
+	/* Get the descriptor */
+	if (lrbp->ucd_rsp_ptr->qr.opcode == UPIU_QUERY_OPCODE_READ_DESC) {
+		u8 *descp = (u8 *)&lrbp->ucd_rsp_ptr +
+				GENERAL_UPIU_REQUEST_SIZE;
+		u16 len;
+
+		/* data segment length */
+		len = be32_to_cpu(lrbp->ucd_rsp_ptr->header.dword_2) &
+						MASK_QUERY_DATA_SEG_LEN;
+
+		memcpy(hba->dev_cmd.query.descriptor, descp,
+				min_t(u16, len, QUERY_DESC_MAX_SIZE));
+	}
+}
+
+/**
  * ufshcd_hba_capabilities - Read controller capabilities
  * @hba: per adapter instance
  */
@@ -622,6 +684,45 @@ void ufshcd_prepare_utp_scsi_cmd_upiu(struct ufshcd_lrb *lrbp, u32 upiu_flags)
 		(min_t(unsigned short, lrbp->cmd->cmd_len, MAX_CDB_SIZE)));
 }
 
+/**
+ * ufshcd_prepare_utp_query_req_upiu() - fills the utp_transfer_req_desc,
+ * for query requsts
+ * @hba: UFS hba
+ * @lrbp: local reference block pointer
+ * @upiu_flags: flags
+ */
+static void ufshcd_prepare_utp_query_req_upiu(struct ufs_hba *hba,
+				struct ufshcd_lrb *lrbp, u32 upiu_flags)
+{
+	struct utp_upiu_req *ucd_req_ptr = lrbp->ucd_req_ptr;
+	struct ufs_query *query = &hba->dev_cmd.query;
+	u16 len = query->request.upiu_req.length;
+	u8 *descp = (u8 *)lrbp->ucd_req_ptr + GENERAL_UPIU_REQUEST_SIZE;
+
+	/* Query request header */
+	ucd_req_ptr->header.dword_0 = UPIU_HEADER_DWORD(
+			UPIU_TRANSACTION_QUERY_REQ, upiu_flags,
+			lrbp->lun, lrbp->task_tag);
+	ucd_req_ptr->header.dword_1 = UPIU_HEADER_DWORD(
+			0, query->request.query_func, 0, 0);
+
+	/* Data segment length */
+	ucd_req_ptr->header.dword_2 = UPIU_HEADER_DWORD(
+			0, 0, len >> 8, (u8)len);
+
+	/* Copy the Query Request buffer as is */
+	memcpy(&ucd_req_ptr->qr, &query->request.upiu_req,
+			QUERY_OSF_SIZE);
+	ufshcd_query_to_be(&ucd_req_ptr->qr);
+
+	/* Copy the Descriptor */
+	if ((len > 0) && (query->request.upiu_req.opcode ==
+					UPIU_QUERY_OPCODE_WRITE_DESC)) {
+		memcpy(descp, query->descriptor,
+				min_t(u16, len, QUERY_DESC_MAX_SIZE));
+	}
+}
+
 static inline void ufshcd_prepare_utp_nop_upiu(struct ufshcd_lrb *lrbp)
 {
 	struct utp_upiu_req *ucd_req_ptr = lrbp->ucd_req_ptr;
@@ -656,7 +757,10 @@ static int ufshcd_compose_upiu(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
 		break;
 	case UTP_CMD_TYPE_DEV_MANAGE:
 		ufshcd_prepare_req_desc_hdr(lrbp, &upiu_flags, DMA_NONE);
-		if (hba->dev_cmd.type == DEV_CMD_TYPE_NOP)
+		if (hba->dev_cmd.type == DEV_CMD_TYPE_QUERY)
+			ufshcd_prepare_utp_query_req_upiu(
+					hba, lrbp, upiu_flags);
+		else if (hba->dev_cmd.type == DEV_CMD_TYPE_NOP)
 			ufshcd_prepare_utp_nop_upiu(lrbp);
 		else
 			ret = -EINVAL;
@@ -800,6 +904,9 @@ ufshcd_dev_cmd_completion(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
 					__func__, resp);
 		}
 		break;
+	case UPIU_TRANSACTION_QUERY_RSP:
+		ufshcd_copy_query_response(hba, lrbp);
+		break;
 	case UPIU_TRANSACTION_REJECT_UPIU:
 		/* TODO: handle Reject UPIU Response */
 		err = -EPERM;
@@ -889,8 +996,8 @@ static inline void ufshcd_put_dev_cmd_tag(struct ufs_hba *hba, int tag)
  * @cmd_type - specifies the type (NOP, Query...)
  * @timeout - time in seconds
  *
- * NOTE: There is only one available tag for device management commands. Thus
- * synchronisation is the responsibilty of the user.
+ * NOTE: Since there is only one available tag for device management commands,
+ * it is expected you hold the hba->dev_cmd.lock mutex.
  */
 static int ufshcd_exec_dev_cmd(struct ufs_hba *hba,
 		enum dev_cmd_type cmd_type, int timeout)
@@ -930,6 +1037,76 @@ out_put_tag:
 }
 
 /**
+ * ufshcd_query_flag() - API function for sending flag query requests
+ * hba: per-adapter instance
+ * query_opcode: flag query to perform
+ * idn: flag idn to access
+ * flag_res: the flag value after the query request completes
+ *
+ * Returns 0 for success, non-zero in case of failure
+ */
+static int ufshcd_query_flag(struct ufs_hba *hba, enum query_opcode opcode,
+			enum flag_idn idn, bool *flag_res)
+{
+	struct ufs_query_req *request;
+	struct ufs_query_res *response;
+	int err;
+
+	BUG_ON(!hba);
+
+	mutex_lock(&hba->dev_cmd.lock);
+	request = &hba->dev_cmd.query.request;
+	response = &hba->dev_cmd.query.response;
+	memset(request, 0, sizeof(struct ufs_query_req));
+	memset(response, 0, sizeof(struct ufs_query_res));
+
+	switch (opcode) {
+	case UPIU_QUERY_OPCODE_SET_FLAG:
+	case UPIU_QUERY_OPCODE_CLEAR_FLAG:
+	case UPIU_QUERY_OPCODE_TOGGLE_FLAG:
+		request->query_func = UPIU_QUERY_FUNC_STANDARD_WRITE_REQUEST;
+		break;
+	case UPIU_QUERY_OPCODE_READ_FLAG:
+		request->query_func = UPIU_QUERY_FUNC_STANDARD_READ_REQUEST;
+		if (!flag_res) {
+			/* No dummy reads */
+			dev_err(hba->dev, "%s: Invalid argument for read request\n",
+					__func__);
+			err = -EINVAL;
+			goto out_unlock;
+		}
+		break;
+	default:
+		dev_err(hba->dev,
+			"%s: Expected query flag opcode but got = %d\n",
+			__func__, opcode);
+		err = -EINVAL;
+		goto out_unlock;
+	}
+	request->upiu_req.opcode = opcode;
+	request->upiu_req.idn = idn;
+
+	/* Send query request */
+	err = ufshcd_exec_dev_cmd(hba, DEV_CMD_TYPE_QUERY,
+			QUERY_REQ_TIMEOUT);
+
+	if (err) {
+		dev_err(hba->dev,
+			"%s: Sending flag query for idn %d failed, err = %d\n",
+			__func__, idn, err);
+		goto out_unlock;
+	}
+
+	if (flag_res)
+		*flag_res = (response->upiu_res.value &
+				MASK_QUERY_UPIU_FLAG_LOC) & 0x1;
+
+out_unlock:
+	mutex_unlock(&hba->dev_cmd.lock);
+	return err;
+}
+
+/**
  * ufshcd_memory_alloc - allocate memory for host memory space data structures
  * @hba: per adapter instance
  *
@@ -1099,6 +1276,57 @@ static int ufshcd_dme_link_startup(struct ufs_hba *hba)
 }
 
 /**
+ * ufshcd_complete_dev_init() - checks device readiness
+ * hba: per-adapter instance
+ *
+ * Set fDeviceInit flag and poll until device toggles it.
+ */
+static int ufshcd_complete_dev_init(struct ufs_hba *hba)
+{
+	int i, retries, err = 0;
+	bool flag_res = 1;
+
+	for (retries = QUERY_REQ_RETRIES; retries > 0; retries--) {
+		/* Set the fDeviceInit flag */
+		err = ufshcd_query_flag(hba, UPIU_QUERY_OPCODE_SET_FLAG,
+					QUERY_FLAG_IDN_FDEVICEINIT, NULL);
+		if (!err || err == -ETIMEDOUT)
+			break;
+		dev_dbg(hba->dev, "%s: error %d retrying\n", __func__, err);
+	}
+	if (err) {
+		dev_err(hba->dev,
+			"%s setting fDeviceInit flag failed with error %d\n",
+			__func__, err);
+		goto out;
+	}
+
+	/* poll for max. 100 iterations for fDeviceInit flag to clear */
+	for (i = 0; i < 100 && !err && flag_res; i++) {
+		for (retries = QUERY_REQ_RETRIES; retries > 0; retries--) {
+			err = ufshcd_query_flag(hba,
+					UPIU_QUERY_OPCODE_READ_FLAG,
+					QUERY_FLAG_IDN_FDEVICEINIT, &flag_res);
+			if (!err || err == -ETIMEDOUT)
+				break;
+			dev_dbg(hba->dev, "%s: error %d retrying\n", __func__,
+					err);
+		}
+	}
+	if (err)
+		dev_err(hba->dev,
+			"%s reading fDeviceInit flag failed with error %d\n",
+			__func__, err);
+	else if (flag_res)
+		dev_err(hba->dev,
+			"%s fDeviceInit was not cleared by the device\n",
+			__func__);
+
+out:
+	return err;
+}
+
+/**
  * ufshcd_make_hba_operational - Make UFS controller operational
  * @hba: per adapter instance
  *
@@ -1953,6 +2181,10 @@ static void ufshcd_async_scan(void *data, async_cookie_t cookie)
 	if (ret)
 		goto out;
 
+	ret = ufshcd_complete_dev_init(hba);
+	if (ret)
+		goto out;
+
 	scsi_scan_host(hba->host);
 out:
 	return;
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index c750a90..6d6fdeb 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -70,6 +70,7 @@
 
 enum dev_cmd_type {
 	DEV_CMD_TYPE_NOP		= 0x0,
+	DEV_CMD_TYPE_QUERY		= 0x1,
 };
 
 /**
@@ -125,6 +126,18 @@ struct ufshcd_lrb {
 };
 
 /**
+ * struct ufs_query - holds relevent data structures for query request
+ * @request: request upiu and function
+ * @descriptor: buffer for sending/receiving descriptor
+ * @response: response upiu and response
+ */
+struct ufs_query {
+	struct ufs_query_req request;
+	u8 *descriptor;
+	struct ufs_query_res response;
+};
+
+/**
  * struct ufs_dev_cmd - all assosiated fields with device management commands
  * @type: device management command type - Query, NOP OUT
  * @lock: lock to allow one command at a time
@@ -136,6 +149,7 @@ struct ufs_dev_cmd {
 	struct mutex lock;
 	struct completion *complete;
 	wait_queue_head_t tag_wq;
+	struct ufs_query query;
 };
 
 /**
@@ -233,4 +247,10 @@ static inline void ufshcd_hba_stop(struct ufs_hba *hba)
 	ufshcd_writel(hba, CONTROLLER_DISABLE,  REG_CONTROLLER_ENABLE);
 }
 
+static inline void check_upiu_size(void)
+{
+	BUILD_BUG_ON(ALIGNED_UPIU_SIZE <
+		GENERAL_UPIU_REQUEST_SIZE + QUERY_DESC_MAX_SIZE);
+}
+
 #endif /* End of Header */
diff --git a/drivers/scsi/ufs/ufshci.h b/drivers/scsi/ufs/ufshci.h
index d5c5f14..f1e1b74 100644
--- a/drivers/scsi/ufs/ufshci.h
+++ b/drivers/scsi/ufs/ufshci.h
@@ -39,7 +39,7 @@
 enum {
 	TASK_REQ_UPIU_SIZE_DWORDS	= 8,
 	TASK_RSP_UPIU_SIZE_DWORDS	= 8,
-	ALIGNED_UPIU_SIZE		= 128,
+	ALIGNED_UPIU_SIZE		= 512,
 };
 
 /* UFSHCI Registers */
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation.


^ permalink raw reply related	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2013-07-23  7:08 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-07-23  7:07 [PATCH V4 0/2] Add suport for internal request (NOP and Query Request) Sujit Reddy Thumma
2013-07-23  7:07 ` [PATCH V4 1/2] scsi: ufs: Add support for sending NOP OUT UPIU Sujit Reddy Thumma
2013-07-23  7:07 ` [PATCH V4 2/2] scsi: ufs: Set fDeviceInit flag to initiate device initialization Sujit Reddy Thumma

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.