All of lore.kernel.org
 help / color / mirror / Atom feed
From: zonque@gmail.com (Daniel Mack)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 11/12] dma: mmp_pdma: add support for residue reporting
Date: Wed,  7 Aug 2013 12:19:29 +0200	[thread overview]
Message-ID: <1375870770-14263-12-git-send-email-zonque@gmail.com> (raw)
In-Reply-To: <1375870770-14263-1-git-send-email-zonque@gmail.com>

In order to report the channel's residue, we have to memorize the first
dma buffer position when the channel is configured.

Signed-off-by: Daniel Mack <zonque@gmail.com>
---
 drivers/dma/mmp_pdma.c | 39 +++++++++++++++++++++++++++++++++++++--
 1 file changed, 37 insertions(+), 2 deletions(-)

diff --git a/drivers/dma/mmp_pdma.c b/drivers/dma/mmp_pdma.c
index c56da7c..0c4a2d5 100644
--- a/drivers/dma/mmp_pdma.c
+++ b/drivers/dma/mmp_pdma.c
@@ -28,8 +28,8 @@
 #define DALGN		0x00a0
 #define DINT		0x00f0
 #define DDADR		0x0200
-#define DSADR		0x0204
-#define DTADR		0x0208
+#define DSADR(n)	(0x0204 + ((n) << 4))
+#define DTADR(n)	(0x0208 + ((n) << 4))
 #define DCMD		0x020c
 
 #define DCSR_RUN	(1 << 31)	/* Run Bit (read / write) */
@@ -97,6 +97,13 @@ struct mmp_pdma_chan {
 	struct dma_async_tx_descriptor desc;
 	struct mmp_pdma_phy *phy;
 	enum dma_transfer_direction dir;
+	/*
+	 * We memorize the original start address of the first descriptor as
+	 * well as the original total length so we can later determine the
+	 * channel's residue.
+	 */
+	dma_addr_t start_addr;
+	u32 total_len;
 
 	/* channel's basic info */
 	struct tasklet_struct tasklet;
@@ -469,6 +476,13 @@ mmp_pdma_prep_memcpy(struct dma_chan *dchan,
 		chan->dcmd |= DCMD_BURST32;
 	}
 
+	if (chan->dir == DMA_MEM_TO_DEV)
+		chan->start_addr = dma_src;
+	else
+		chan->start_addr = dma_dst;
+
+	chan->total_len = len;
+
 	do {
 		/* Allocate the link descriptor from DMA pool */
 		new = mmp_pdma_alloc_descriptor(chan);
@@ -540,11 +554,17 @@ mmp_pdma_prep_slave_sg(struct dma_chan *dchan, struct scatterlist *sgl,
 		return NULL;
 
 	chan->byte_align = false;
+	chan->total_len = 0;
 
 	for_each_sg(sgl, sg, sg_len, i) {
 		addr = sg_dma_address(sg);
 		avail = sg_dma_len(sgl);
 
+		if (!first)
+			chan->start_addr = addr;
+
+		chan->total_len += avail;
+
 		do {
 			len = min_t(size_t, avail, PDMA_MAX_DESC_BYTES);
 			if (addr & 0x7)
@@ -671,6 +691,20 @@ static int mmp_pdma_control(struct dma_chan *dchan, enum dma_ctrl_cmd cmd,
 	return ret;
 }
 
+static unsigned int mmp_pdma_residue(struct mmp_pdma_chan *chan)
+{
+	u32 curr, done;
+
+	if (chan->dir == DMA_DEV_TO_MEM)
+		curr = readl(chan->phy->base + DTADR(chan->phy->idx));
+	else
+		curr = readl(chan->phy->base + DSADR(chan->phy->idx));
+
+	done = curr - chan->start_addr;
+
+	return chan->total_len - done;
+}
+
 static enum dma_status mmp_pdma_tx_status(struct dma_chan *dchan,
 			dma_cookie_t cookie, struct dma_tx_state *txstate)
 {
@@ -680,6 +714,7 @@ static enum dma_status mmp_pdma_tx_status(struct dma_chan *dchan,
 
 	spin_lock_irqsave(&chan->desc_lock, flags);
 	ret = dma_cookie_status(dchan, cookie, txstate);
+	txstate->residue = mmp_pdma_residue(chan);
 	spin_unlock_irqrestore(&chan->desc_lock, flags);
 
 	return ret;
-- 
1.8.3.1

  parent reply	other threads:[~2013-08-07 10:19 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-08-07 10:19 [PATCH 00/12] dma: pdma: some patches needed for PXA DT environments Daniel Mack
2013-08-07 10:19 ` [PATCH 01/12] dma: mmp_pdma: add protect when alloc/free phy channels Daniel Mack
2013-08-07 12:40   ` Ezequiel Garcia
2013-08-07 12:42     ` Daniel Mack
2013-08-08  8:35     ` Daniel Mack
2013-08-07 10:19 ` [PATCH 02/12] dma: mmp_pdma: clear DRCMR when free a phy channel Daniel Mack
2013-08-07 10:19 ` [PATCH 03/12] dma: mmp_pdma: factor out DRCMR register calculation Daniel Mack
2013-08-07 10:19 ` [PATCH 04/12] dma: mmp_pdma: fix maximum transfer length Daniel Mack
2013-08-07 10:19 ` [PATCH 05/12] dma: mmp_pdma: add filter function Daniel Mack
2013-08-07 10:19 ` [PATCH 06/12] dma: mmp_pdma: make the controller a DMA provider Daniel Mack
2013-08-07 16:12   ` Arnd Bergmann
2013-08-07 16:17     ` Daniel Mack
2013-08-07 20:17       ` Arnd Bergmann
2013-08-08  8:38     ` Daniel Mack
2013-08-09 13:10     ` Daniel Mack
2013-08-09 14:32       ` zhangfei gao
2013-08-09 21:08         ` Arnd Bergmann
2013-08-07 10:19 ` [PATCH 07/12] dma: mmp_pdma: print the number of channels at probe time Daniel Mack
2013-08-07 10:19 ` [PATCH 08/12] dma: mmp_pdma: remove duplicate assignment Daniel Mack
2013-08-07 10:19 ` [PATCH 09/12] dma: mmp_pdma: add support for byte-aligned transfers Daniel Mack
2013-08-08  9:04   ` Xiang Wang
2013-08-08  9:11     ` Daniel Mack
2013-08-16  8:05       ` Xiang Wang
2013-08-07 10:19 ` [PATCH 10/12] dma: mmp_pdma: implement DMA_PAUSE and DMA_RESUME Daniel Mack
2013-08-07 10:19 ` Daniel Mack [this message]
2013-08-07 10:19 ` [PATCH 12/12] dma: mmp_pdma: add support for cyclic DMA descriptors Daniel Mack

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1375870770-14263-12-git-send-email-zonque@gmail.com \
    --to=zonque@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.