From mboxrd@z Thu Jan 1 00:00:00 1970 From: John Crispin Subject: [PATCH V3 1/2] DT: Add documentation for rt2880-wdt Date: Fri, 9 Aug 2013 21:00:31 +0200 Message-ID: <1376074831-29561-1-git-send-email-blogic@openwrt.org> Return-path: Sender: linux-mips-bounce@linux-mips.org Errors-to: linux-mips-bounce@linux-mips.org List-help: List-unsubscribe: List-software: Ecartis version 1.0.0 List-subscribe: List-owner: List-post: List-archive: To: Wim Van Sebroeck Cc: John Crispin , linux-watchdog@vger.kernel.org, linux-mips@linux-mips.org, devicetree-discuss@lists.ozlabs.org List-Id: devicetree@vger.kernel.org This document describes the binding of the watchdog core found ralink wireless SoC. Signed-off-by: John Crispin Cc: linux-watchdog@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: devicetree-discuss@lists.ozlabs.org --- Changes in V3: * renamed file to rt2880-wdt.txt .../devicetree/bindings/watchdog/rt2880-wdt.txt | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) create mode 100644 Documentation/devicetree/bindings/watchdog/rt2880-wdt.txt diff --git a/Documentation/devicetree/bindings/watchdog/rt2880-wdt.txt b/Documentation/devicetree/bindings/watchdog/rt2880-wdt.txt new file mode 100644 index 0000000..a654dd1 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/rt2880-wdt.txt @@ -0,0 +1,19 @@ +Ralink Watchdog Timers + +Required properties : +- compatible: must be "ralink,rt2880-wdt" +- reg: physical base address of the controller and length of the register range + +Optional properties : +- interrupt-parent: phandle to the INTC device node +- interrupts: Specify the INTC interrupt number + +Example: + + watchdog@120 { + compatible = "ralink,rt2880-wdt"; + reg = <0x120 0x10>; + + interrupt-parent = <&intc>; + interrupts = <1>; + }; -- 1.7.10.4