All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sourav Poddar <sourav.poddar@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [UBOOT][PATCHv6 5/6] dra7xx_evm: add SPL API, QSPI, and serial flash support
Date: Mon, 7 Oct 2013 15:53:03 +0530	[thread overview]
Message-ID: <1381141384-32706-6-git-send-email-sourav.poddar@ti.com> (raw)
In-Reply-To: <1381141384-32706-1-git-send-email-sourav.poddar@ti.com>

From: Matt Porter <matt.porter@linaro.org>

Enables support for SPI SPL, QSPI and Spansion serial flash device
on the EVM. Configures pin muxes for QSPI mode.

Signed-off-by: Matt Porter <matt.porter@linaro.org>
Signed-off-by: Sourav Poddar <sourav.poddar@ti.com>
---
v5->v6:
change MMAP name to amore readable name.
 board/ti/dra7xx/mux_data.h   |   10 ++++++++++
 include/configs/dra7xx_evm.h |   19 +++++++++++++++++++
 2 files changed, 29 insertions(+), 0 deletions(-)

diff --git a/board/ti/dra7xx/mux_data.h b/board/ti/dra7xx/mux_data.h
index 0a86594..6965cc5 100644
--- a/board/ti/dra7xx/mux_data.h
+++ b/board/ti/dra7xx/mux_data.h
@@ -51,5 +51,15 @@ const struct pad_conf_entry core_padconf_array_essential[] = {
 	{RGMII0_RXD2, (IEN | M0) },
 	{RGMII0_RXD1, (IEN | M0) },
 	{RGMII0_RXD0, (IEN | M0) },
+	{GPMC_A13, (IEN | PDIS | M1)},  /* QSPI1_RTCLK */
+	{GPMC_A14, (IEN | PDIS | M1)},  /* QSPI1_D[3] */
+	{GPMC_A15, (IEN | PDIS | M1)},  /* QSPI1_D[2] */
+	{GPMC_A16, (IEN | PDIS | M1)},  /* QSPI1_D[1] */
+	{GPMC_A17, (IEN | PDIS | M1)},  /* QSPI1_D[0] */
+	{GPMC_A18, (M1)},  /* QSPI1_SCLK */
+	{GPMC_A3, (IEN | PDIS | M1)},   /* QSPI1_CS2 */
+	{GPMC_A4, (IEN | PDIS | M1)},   /* QSPI1_CS3 */
+	{GPMC_CS2, (IEN | PTU | PDIS | M1)},    /* QSPI1_CS0 */
+	{GPMC_CS3, (IEN | PTU | PDIS | M1)},    /* QSPI1_CS1*/
 };
 #endif /* _MUX_DATA_DRA7XX_H_ */
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index 4fbe768..f9cfd18 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -42,4 +42,23 @@
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_ADDR			2
 
+/* SPI */
+#undef	CONFIG_OMAP3_SPI
+#define CONFIG_TI_QSPI
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_SPANSION
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_SPI
+#define CONFIG_TI_SPI_MMAP
+#define CONFIG_SF_DEFAULT_SPEED                48000000
+#define CONFIG_DEFAULT_SPI_MODE                SPI_MODE_3
+
+/* SPI SPL */
+#define CONFIG_SPL_SPI_SUPPORT
+#define CONFIG_SPL_SPI_LOAD
+#define CONFIG_SPL_SPI_FLASH_SUPPORT
+#define CONFIG_SPL_SPI_BUS             0
+#define CONFIG_SPL_SPI_CS              0
+#define CONFIG_SYS_SPI_U_BOOT_OFFS     0x20000
+
 #endif /* __CONFIG_DRA7XX_EVM_H */
-- 
1.7.1

  parent reply	other threads:[~2013-10-07 10:23 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-10-07 10:22 [U-Boot] [UBOOT][PATCHv6 0/6] Add TI qspi controller with memory mapped support Sourav Poddar
2013-10-07 10:22 ` [U-Boot] [UBOOT][PATCHv6 1/6] omap5: add qspi support Sourav Poddar
2013-10-07 10:23 ` [U-Boot] [UBOOT][PATCHv6 2/6] armv7: hw_data: change clock divider setting Sourav Poddar
2013-10-07 10:23 ` [U-Boot] [UBOOT][PATCHv6 3/6] sf: Add memory mapped read support Sourav Poddar
2013-10-07 10:23 ` [U-Boot] [UBOOT][PATCHv6 4/6] spi: add TI QSPI driver Sourav Poddar
2013-10-07 10:23 ` Sourav Poddar [this message]
2013-10-07 10:23 ` [U-Boot] [UBOOT][PATCHv6 6/6] README: qspi usecase and testing documentation Sourav Poddar
2013-10-07 14:31 ` [U-Boot] [UBOOT][PATCHv6 0/6] Add TI qspi controller with memory mapped support Jagan Teki
2013-10-07 15:17   ` Sourav Poddar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1381141384-32706-6-git-send-email-sourav.poddar@ti.com \
    --to=sourav.poddar@ti.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.