From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756923Ab3KLTtv (ORCPT ); Tue, 12 Nov 2013 14:49:51 -0500 Received: from arroyo.ext.ti.com ([192.94.94.40]:59102 "EHLO arroyo.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756237Ab3KLTsm (ORCPT ); Tue, 12 Nov 2013 14:48:42 -0500 From: Eduardo Valentin To: , , , , , , CC: , , , , , , , Eduardo Valentin , Jean Delvare Subject: [PATCHv5 06/20] hwmon: lm75: expose to thermal fw via DT nodes Date: Tue, 12 Nov 2013 15:46:08 -0400 Message-ID: <1384285582-16933-7-git-send-email-eduardo.valentin@ti.com> X-Mailer: git-send-email 1.8.2.1.342.gfa7285d In-Reply-To: <1384285582-16933-1-git-send-email-eduardo.valentin@ti.com> References: <1384285582-16933-1-git-send-email-eduardo.valentin@ti.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This patch adds to lm75 temperature sensor the possibility to expose itself as thermal zone device, registered on the thermal framework. The thermal zone is built only if a device tree node describing a thermal zone for this sensor is present inside the lm75 DT node. Otherwise, the driver behavior will be the same. Cc: Jean Delvare Cc: lm-sensors@lm-sensors.org Cc: linux-kernel@vger.kernel.org Acked-by: Guenter Roeck Signed-off-by: Eduardo Valentin --- drivers/hwmon/lm75.c | 35 ++++++++++++++++++++++++++++++----- 1 file changed, 30 insertions(+), 5 deletions(-) diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c index c03b490..1d3600a 100644 --- a/drivers/hwmon/lm75.c +++ b/drivers/hwmon/lm75.c @@ -27,6 +27,8 @@ #include #include #include +#include +#include #include "lm75.h" @@ -70,6 +72,7 @@ static const u8 LM75_REG_TEMP[3] = { /* Each client has this additional data */ struct lm75_data { struct device *hwmon_dev; + struct thermal_zone_device *tz; struct mutex update_lock; u8 orig_conf; u8 resolution; /* In bits, between 9 and 12 */ @@ -90,22 +93,36 @@ static struct lm75_data *lm75_update_device(struct device *dev); /*-----------------------------------------------------------------------*/ +static inline long lm75_reg_to_mc(s16 temp, u8 resolution) +{ + return ((temp >> (16 - resolution)) * 1000) >> (resolution - 8); +} + /* sysfs attributes for hwmon */ +static int lm75_read_temp(void *dev, long *temp) +{ + struct lm75_data *data = lm75_update_device(dev); + + if (IS_ERR(data)) + return PTR_ERR(data); + + *temp = lm75_reg_to_mc(data->temp[0], data->resolution); + + return 0; +} + static ssize_t show_temp(struct device *dev, struct device_attribute *da, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(da); struct lm75_data *data = lm75_update_device(dev); - long temp; if (IS_ERR(data)) return PTR_ERR(data); - temp = ((data->temp[attr->index] >> (16 - data->resolution)) * 1000) - >> (data->resolution - 8); - - return sprintf(buf, "%ld\n", temp); + return sprintf(buf, "%ld\n", lm75_reg_to_mc(data->temp[attr->index], + data->resolution)); } static ssize_t set_temp(struct device *dev, struct device_attribute *da, @@ -271,6 +288,13 @@ lm75_probe(struct i2c_client *client, const struct i2c_device_id *id) goto exit_remove; } + data->tz = thermal_zone_of_sensor_register(&client->dev, + 0, + &client->dev, + lm75_read_temp, NULL); + if (IS_ERR(data->tz)) + data->tz = NULL; + dev_info(&client->dev, "%s: sensor '%s'\n", dev_name(data->hwmon_dev), client->name); @@ -285,6 +309,7 @@ static int lm75_remove(struct i2c_client *client) { struct lm75_data *data = i2c_get_clientdata(client); + thermal_zone_of_sensor_unregister(&client->dev, data->tz); hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &lm75_group); lm75_write_value(client, LM75_REG_CONF, data->orig_conf); -- 1.8.2.1.342.gfa7285d From mboxrd@z Thu Jan 1 00:00:00 1970 From: Eduardo Valentin Subject: [PATCHv5 06/20] hwmon: lm75: expose to thermal fw via DT nodes Date: Tue, 12 Nov 2013 15:46:08 -0400 Message-ID: <1384285582-16933-7-git-send-email-eduardo.valentin@ti.com> References: <1384285582-16933-1-git-send-email-eduardo.valentin@ti.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <1384285582-16933-1-git-send-email-eduardo.valentin@ti.com> Sender: linux-pm-owner@vger.kernel.org To: swarren@wwwdotorg.org, pawel.moll@arm.com, mark.rutland@arm.com, ian.campbell@citrix.com, rob.herring@calxeda.com, linux@roeck-us.net, rui.zhang@intel.com Cc: wni@nvidia.com, grant.likely@linaro.org, durgadoss.r@intel.com, linux-pm@vger.kernel.org, devicetree@vger.kernel.org, lm-sensors@lm-sensors.org, linux-kernel@vger.kernel.org, Eduardo Valentin , Jean Delvare List-Id: devicetree@vger.kernel.org This patch adds to lm75 temperature sensor the possibility to expose itself as thermal zone device, registered on the thermal framework. The thermal zone is built only if a device tree node describing a thermal zone for this sensor is present inside the lm75 DT node. Otherwise, the driver behavior will be the same. Cc: Jean Delvare Cc: lm-sensors@lm-sensors.org Cc: linux-kernel@vger.kernel.org Acked-by: Guenter Roeck Signed-off-by: Eduardo Valentin --- drivers/hwmon/lm75.c | 35 ++++++++++++++++++++++++++++++----- 1 file changed, 30 insertions(+), 5 deletions(-) diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c index c03b490..1d3600a 100644 --- a/drivers/hwmon/lm75.c +++ b/drivers/hwmon/lm75.c @@ -27,6 +27,8 @@ #include #include #include +#include +#include #include "lm75.h" @@ -70,6 +72,7 @@ static const u8 LM75_REG_TEMP[3] = { /* Each client has this additional data */ struct lm75_data { struct device *hwmon_dev; + struct thermal_zone_device *tz; struct mutex update_lock; u8 orig_conf; u8 resolution; /* In bits, between 9 and 12 */ @@ -90,22 +93,36 @@ static struct lm75_data *lm75_update_device(struct device *dev); /*-----------------------------------------------------------------------*/ +static inline long lm75_reg_to_mc(s16 temp, u8 resolution) +{ + return ((temp >> (16 - resolution)) * 1000) >> (resolution - 8); +} + /* sysfs attributes for hwmon */ +static int lm75_read_temp(void *dev, long *temp) +{ + struct lm75_data *data = lm75_update_device(dev); + + if (IS_ERR(data)) + return PTR_ERR(data); + + *temp = lm75_reg_to_mc(data->temp[0], data->resolution); + + return 0; +} + static ssize_t show_temp(struct device *dev, struct device_attribute *da, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(da); struct lm75_data *data = lm75_update_device(dev); - long temp; if (IS_ERR(data)) return PTR_ERR(data); - temp = ((data->temp[attr->index] >> (16 - data->resolution)) * 1000) - >> (data->resolution - 8); - - return sprintf(buf, "%ld\n", temp); + return sprintf(buf, "%ld\n", lm75_reg_to_mc(data->temp[attr->index], + data->resolution)); } static ssize_t set_temp(struct device *dev, struct device_attribute *da, @@ -271,6 +288,13 @@ lm75_probe(struct i2c_client *client, const struct i2c_device_id *id) goto exit_remove; } + data->tz = thermal_zone_of_sensor_register(&client->dev, + 0, + &client->dev, + lm75_read_temp, NULL); + if (IS_ERR(data->tz)) + data->tz = NULL; + dev_info(&client->dev, "%s: sensor '%s'\n", dev_name(data->hwmon_dev), client->name); @@ -285,6 +309,7 @@ static int lm75_remove(struct i2c_client *client) { struct lm75_data *data = i2c_get_clientdata(client); + thermal_zone_of_sensor_unregister(&client->dev, data->tz); hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &lm75_group); lm75_write_value(client, LM75_REG_CONF, data->orig_conf); -- 1.8.2.1.342.gfa7285d From mboxrd@z Thu Jan 1 00:00:00 1970 From: Eduardo Valentin Date: Tue, 12 Nov 2013 19:46:08 +0000 Subject: [lm-sensors] [PATCHv5 06/20] hwmon: lm75: expose to thermal fw via DT nodes Message-Id: <1384285582-16933-7-git-send-email-eduardo.valentin@ti.com> List-Id: References: <1384285582-16933-1-git-send-email-eduardo.valentin@ti.com> In-Reply-To: <1384285582-16933-1-git-send-email-eduardo.valentin@ti.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: swarren@wwwdotorg.org, pawel.moll@arm.com, mark.rutland@arm.com, ian.campbell@citrix.com, rob.herring@calxeda.com, linux@roeck-us.net, rui.zhang@intel.com Cc: wni@nvidia.com, grant.likely@linaro.org, durgadoss.r@intel.com, linux-pm@vger.kernel.org, devicetree@vger.kernel.org, lm-sensors@lm-sensors.org, linux-kernel@vger.kernel.org, Eduardo Valentin , Jean Delvare This patch adds to lm75 temperature sensor the possibility to expose itself as thermal zone device, registered on the thermal framework. The thermal zone is built only if a device tree node describing a thermal zone for this sensor is present inside the lm75 DT node. Otherwise, the driver behavior will be the same. Cc: Jean Delvare Cc: lm-sensors@lm-sensors.org Cc: linux-kernel@vger.kernel.org Acked-by: Guenter Roeck Signed-off-by: Eduardo Valentin --- drivers/hwmon/lm75.c | 35 ++++++++++++++++++++++++++++++----- 1 file changed, 30 insertions(+), 5 deletions(-) diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c index c03b490..1d3600a 100644 --- a/drivers/hwmon/lm75.c +++ b/drivers/hwmon/lm75.c @@ -27,6 +27,8 @@ #include #include #include +#include +#include #include "lm75.h" @@ -70,6 +72,7 @@ static const u8 LM75_REG_TEMP[3] = { /* Each client has this additional data */ struct lm75_data { struct device *hwmon_dev; + struct thermal_zone_device *tz; struct mutex update_lock; u8 orig_conf; u8 resolution; /* In bits, between 9 and 12 */ @@ -90,22 +93,36 @@ static struct lm75_data *lm75_update_device(struct device *dev); /*-----------------------------------------------------------------------*/ +static inline long lm75_reg_to_mc(s16 temp, u8 resolution) +{ + return ((temp >> (16 - resolution)) * 1000) >> (resolution - 8); +} + /* sysfs attributes for hwmon */ +static int lm75_read_temp(void *dev, long *temp) +{ + struct lm75_data *data = lm75_update_device(dev); + + if (IS_ERR(data)) + return PTR_ERR(data); + + *temp = lm75_reg_to_mc(data->temp[0], data->resolution); + + return 0; +} + static ssize_t show_temp(struct device *dev, struct device_attribute *da, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(da); struct lm75_data *data = lm75_update_device(dev); - long temp; if (IS_ERR(data)) return PTR_ERR(data); - temp = ((data->temp[attr->index] >> (16 - data->resolution)) * 1000) - >> (data->resolution - 8); - - return sprintf(buf, "%ld\n", temp); + return sprintf(buf, "%ld\n", lm75_reg_to_mc(data->temp[attr->index], + data->resolution)); } static ssize_t set_temp(struct device *dev, struct device_attribute *da, @@ -271,6 +288,13 @@ lm75_probe(struct i2c_client *client, const struct i2c_device_id *id) goto exit_remove; } + data->tz = thermal_zone_of_sensor_register(&client->dev, + 0, + &client->dev, + lm75_read_temp, NULL); + if (IS_ERR(data->tz)) + data->tz = NULL; + dev_info(&client->dev, "%s: sensor '%s'\n", dev_name(data->hwmon_dev), client->name); @@ -285,6 +309,7 @@ static int lm75_remove(struct i2c_client *client) { struct lm75_data *data = i2c_get_clientdata(client); + thermal_zone_of_sensor_unregister(&client->dev, data->tz); hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &lm75_group); lm75_write_value(client, LM75_REG_CONF, data->orig_conf); -- 1.8.2.1.342.gfa7285d _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors