From: Przemyslaw Marczak <p.marczak@samsung.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 01/10] s5p: gpio: change gpio coding method for s5p gpio.
Date: Tue, 03 Dec 2013 19:03:17 +0100 [thread overview]
Message-ID: <1386093806-2948-2-git-send-email-p.marczak@samsung.com> (raw)
In-Reply-To: <1386093806-2948-1-git-send-email-p.marczak@samsung.com>
Old s5p gpio coding method was not clean and was not working properly
for all parts and banks. New method is clean and easy to extend.
Gpio coding mask:
0x000000ff - pin number
0x00ffff00 - bank offset
0xff000000 - part number
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
---
arch/arm/include/asm/arch-exynos/gpio.h | 169 +++++++++++-------------------
arch/arm/include/asm/arch-s5pc1xx/gpio.h | 47 +++++++--
drivers/gpio/s5p_gpio.c | 15 +--
include/configs/s5p_goni.h | 4 +-
include/configs/s5pc210_universal.h | 12 +--
include/configs/trats.h | 8 +-
include/configs/trats2.h | 12 +--
7 files changed, 125 insertions(+), 142 deletions(-)
diff --git a/arch/arm/include/asm/arch-exynos/gpio.h b/arch/arm/include/asm/arch-exynos/gpio.h
index a1a7439..b7dc8f5 100644
--- a/arch/arm/include/asm/arch-exynos/gpio.h
+++ b/arch/arm/include/asm/arch-exynos/gpio.h
@@ -196,117 +196,72 @@ void s5p_gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode);
/* GPIO pins per bank */
#define GPIO_PER_BANK 8
-#define exynos4_gpio_part1_get_nr(bank, pin) \
- ((((((unsigned int) &(((struct exynos4_gpio_part1 *) \
- EXYNOS4_GPIO_PART1_BASE)->bank)) \
- - EXYNOS4_GPIO_PART1_BASE) / sizeof(struct s5p_gpio_bank)) \
- * GPIO_PER_BANK) + pin)
-
-#define EXYNOS4_GPIO_PART1_MAX ((sizeof(struct exynos4_gpio_part1) \
- / sizeof(struct s5p_gpio_bank)) * GPIO_PER_BANK)
-
-#define exynos4_gpio_part2_get_nr(bank, pin) \
- (((((((unsigned int) &(((struct exynos4_gpio_part2 *) \
- EXYNOS4_GPIO_PART2_BASE)->bank)) \
- - EXYNOS4_GPIO_PART2_BASE) / sizeof(struct s5p_gpio_bank)) \
- * GPIO_PER_BANK) + pin) + EXYNOS4_GPIO_PART1_MAX)
-
-#define exynos4x12_gpio_part1_get_nr(bank, pin) \
- ((((((unsigned int) &(((struct exynos4x12_gpio_part1 *) \
- EXYNOS4X12_GPIO_PART1_BASE)->bank)) \
- - EXYNOS4X12_GPIO_PART1_BASE) / sizeof(struct s5p_gpio_bank)) \
- * GPIO_PER_BANK) + pin)
-
-#define EXYNOS4X12_GPIO_PART1_MAX ((sizeof(struct exynos4x12_gpio_part1) \
- / sizeof(struct s5p_gpio_bank)) * GPIO_PER_BANK)
-
-#define exynos4x12_gpio_part2_get_nr(bank, pin) \
- (((((((unsigned int) &(((struct exynos4x12_gpio_part2 *) \
- EXYNOS4X12_GPIO_PART2_BASE)->bank)) \
- - EXYNOS4X12_GPIO_PART2_BASE) / sizeof(struct s5p_gpio_bank)) \
- * GPIO_PER_BANK) + pin) + EXYNOS4X12_GPIO_PART1_MAX)
-
-#define EXYNOS4X12_GPIO_PART2_MAX ((sizeof(struct exynos4x12_gpio_part2) \
- / sizeof(struct s5p_gpio_bank)) * GPIO_PER_BANK)
-
-#define exynos4x12_gpio_part3_get_nr(bank, pin) \
- (((((((unsigned int) &(((struct exynos4x12_gpio_part3 *) \
- EXYNOS4X12_GPIO_PART3_BASE)->bank)) \
- - EXYNOS4X12_GPIO_PART3_BASE) / sizeof(struct s5p_gpio_bank)) \
- * GPIO_PER_BANK) + pin) + EXYNOS4X12_GPIO_PART2_MAX)
-
-#define exynos5_gpio_part1_get_nr(bank, pin) \
- ((((((unsigned int) &(((struct exynos5_gpio_part1 *) \
- EXYNOS5_GPIO_PART1_BASE)->bank)) \
- - EXYNOS5_GPIO_PART1_BASE) / sizeof(struct s5p_gpio_bank)) \
- * GPIO_PER_BANK) + pin)
-
-#define EXYNOS5_GPIO_PART1_MAX ((sizeof(struct exynos5_gpio_part1) \
- / sizeof(struct s5p_gpio_bank)) * GPIO_PER_BANK)
-
-#define exynos5_gpio_part2_get_nr(bank, pin) \
- (((((((unsigned int) &(((struct exynos5_gpio_part2 *) \
- EXYNOS5_GPIO_PART2_BASE)->bank)) \
- - EXYNOS5_GPIO_PART2_BASE) / sizeof(struct s5p_gpio_bank)) \
- * GPIO_PER_BANK) + pin) + EXYNOS5_GPIO_PART1_MAX)
-
-#define EXYNOS5_GPIO_PART2_MAX ((sizeof(struct exynos5_gpio_part2) \
- / sizeof(struct s5p_gpio_bank)) * GPIO_PER_BANK)
-
-#define exynos5_gpio_part3_get_nr(bank, pin) \
- (((((((unsigned int) &(((struct exynos5_gpio_part3 *) \
- EXYNOS5_GPIO_PART3_BASE)->bank)) \
- - EXYNOS5_GPIO_PART3_BASE) / sizeof(struct s5p_gpio_bank)) \
- * GPIO_PER_BANK) + pin) + EXYNOS5_GPIO_PART2_MAX)
-
-static inline unsigned int s5p_gpio_base(int nr)
+#define S5P_GPIO_PART_SHIFT (24)
+#define S5P_GPIO_PART_MASK (0xff)
+#define S5P_GPIO_BANK_SHIFT (8)
+#define S5P_GPIO_BANK_MASK (0xffff)
+#define S5P_GPIO_PIN_MASK (0xff)
+
+#define S5P_GPIO_SET_PART(x) \
+ ((x & S5P_GPIO_PART_MASK) << S5P_GPIO_PART_SHIFT)
+
+#define S5P_GPIO_GET_PART(x) \
+ ((x >> S5P_GPIO_PART_SHIFT) & S5P_GPIO_PART_MASK)
+
+#define S5P_GPIO_SET_PIN(x) \
+ (x & S5P_GPIO_PIN_MASK)
+
+#define EXYNOS4_GPIO_SET_BANK(part, bank) \
+ ((((unsigned)&(((struct exynos4_gpio_part##part *) \
+ EXYNOS4_GPIO_PART##part##_BASE)->bank) \
+ - EXYNOS4_GPIO_PART##part##_BASE) \
+ & S5P_GPIO_BANK_MASK) << S5P_GPIO_BANK_SHIFT)
+
+#define EXYNOS4X12_GPIO_SET_BANK(part, bank) \
+ ((((unsigned)&(((struct exynos4x12_gpio_part##part *) \
+ EXYNOS4X12_GPIO_PART##part##_BASE)->bank) \
+ - EXYNOS4X12_GPIO_PART##part##_BASE) \
+ & S5P_GPIO_BANK_MASK) << S5P_GPIO_BANK_SHIFT)
+
+#define EXYNOS5_GPIO_SET_BANK(part, bank) \
+ ((((unsigned)&(((struct exynos5_gpio_part##part *) \
+ EXYNOS5_GPIO_PART##part##_BASE)->bank) \
+ - EXYNOS5_GPIO_PART##part##_BASE) \
+ & S5P_GPIO_BANK_MASK) << S5P_GPIO_BANK_SHIFT)
+
+#define exynos4_gpio_get(part, bank, pin) \
+ (S5P_GPIO_SET_PART(part) | \
+ EXYNOS4_GPIO_SET_BANK(part, bank) | \
+ S5P_GPIO_SET_PIN(pin))
+
+#define exynos4x12_gpio_get(part, bank, pin) \
+ (S5P_GPIO_SET_PART(part) | \
+ EXYNOS4X12_GPIO_SET_BANK(part, bank) | \
+ S5P_GPIO_SET_PIN(pin))
+
+#define exynos5_gpio_get(part, bank, pin) \
+ (S5P_GPIO_SET_PART(part) | \
+ EXYNOS5_GPIO_SET_BANK(part, bank) | \
+ S5P_GPIO_SET_PIN(pin))
+
+static inline unsigned int s5p_gpio_base(int gpio)
{
- if (cpu_is_exynos5()) {
- if (nr < EXYNOS5_GPIO_PART1_MAX)
- return EXYNOS5_GPIO_PART1_BASE;
- else if (nr < EXYNOS5_GPIO_PART2_MAX)
- return EXYNOS5_GPIO_PART2_BASE;
- else
- return EXYNOS5_GPIO_PART3_BASE;
-
- } else if (cpu_is_exynos4()) {
- if (nr < EXYNOS4_GPIO_PART1_MAX)
- return EXYNOS4_GPIO_PART1_BASE;
- else
- return EXYNOS4_GPIO_PART2_BASE;
+ unsigned gpio_part = S5P_GPIO_GET_PART(gpio);
+
+ switch (gpio_part) {
+ case 1:
+ return samsung_get_base_gpio_part1();
+ case 2:
+ return samsung_get_base_gpio_part2();
+ case 3:
+ return samsung_get_base_gpio_part3();
+ case 4:
+ return samsung_get_base_gpio_part4();
+ default:
+ return 0;
}
-
- return 0;
}
-static inline unsigned int s5p_gpio_part_max(int nr)
-{
- if (cpu_is_exynos5()) {
- if (nr < EXYNOS5_GPIO_PART1_MAX)
- return 0;
- else if (nr < EXYNOS5_GPIO_PART2_MAX)
- return EXYNOS5_GPIO_PART1_MAX;
- else
- return EXYNOS5_GPIO_PART2_MAX;
-
- } else if (cpu_is_exynos4()) {
- if (proid_is_exynos4412()) {
- if (nr < EXYNOS4X12_GPIO_PART1_MAX)
- return 0;
- else if (nr < EXYNOS4X12_GPIO_PART2_MAX)
- return EXYNOS4X12_GPIO_PART1_MAX;
- else
- return EXYNOS4X12_GPIO_PART2_MAX;
- } else {
- if (nr < EXYNOS4_GPIO_PART1_MAX)
- return 0;
- else
- return EXYNOS4_GPIO_PART1_MAX;
- }
- }
-
- return 0;
-}
#endif
/* Pin configurations */
diff --git a/arch/arm/include/asm/arch-s5pc1xx/gpio.h b/arch/arm/include/asm/arch-s5pc1xx/gpio.h
index ac60fe6..84a7091 100644
--- a/arch/arm/include/asm/arch-s5pc1xx/gpio.h
+++ b/arch/arm/include/asm/arch-s5pc1xx/gpio.h
@@ -125,20 +125,45 @@ void s5p_gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode);
/* GPIO pins per bank */
#define GPIO_PER_BANK 8
-static inline unsigned int s5p_gpio_base(int nr)
-{
- return S5PC110_GPIO_BASE;
-}
+#define S5P_GPIO_PART_SHIFT (24)
+#define S5P_GPIO_PART_MASK (0xff)
+#define S5P_GPIO_BANK_SHIFT (8)
+#define S5P_GPIO_BANK_MASK (0xffff)
+#define S5P_GPIO_PIN_MASK (0xff)
+
+#define S5P_GPIO_SET_PART(x) \
+ ((x & S5P_GPIO_PART_MASK) << S5P_GPIO_PART_SHIFT)
+
+#define S5P_GPIO_GET_PART(x) \
+ ((x >> S5P_GPIO_PART_SHIFT) & S5P_GPIO_PART_MASK)
+
+#define S5P_GPIO_SET_PIN(x) \
+ (x & S5P_GPIO_PIN_MASK)
-static inline unsigned int s5p_gpio_part_max(int nr)
+#define S5PC100_SET_BANK(bank) \
+ (((unsigned)&(((struct s5pc100_gpio *) \
+ S5PC100_GPIO_BASE)->bank) - S5PC100_GPIO_BASE) \
+ & S5P_GPIO_BANK_MASK) << S5P_GPIO_BANK_SHIFT)
+
+#define S5PC110_SET_BANK(bank) \
+ ((((unsigned) &(((struct s5pc110_gpio *) \
+ S5PC110_GPIO_BASE)->bank) - S5PC110_GPIO_BASE) \
+ & S5P_GPIO_BANK_MASK) << S5P_GPIO_BANK_SHIFT)
+
+#define s5pc100_gpio_get(bank, pin) \
+ (S5P_GPIO_SET_PART(0) | \
+ S5PC100_SET_BANK(bank) | \
+ S5P_GPIO_SET_PIN(pin))
+
+#define s5pc110_gpio_get(bank, pin) \
+ (S5P_GPIO_SET_PART(0) | \
+ S5PC110_SET_BANK(bank) | \
+ S5P_GPIO_SET_PIN(pin))
+
+static inline unsigned int s5p_gpio_base(int nr)
{
- return 0;
+ return samsung_get_base_gpio();
}
-
-#define s5pc110_gpio_get_nr(bank, pin) \
- ((((((unsigned int)&(((struct s5pc110_gpio *)S5PC110_GPIO_BASE)->bank))\
- - S5PC110_GPIO_BASE) / sizeof(struct s5p_gpio_bank)) \
- * GPIO_PER_BANK) + pin)
#endif
/* Pin configurations */
diff --git a/drivers/gpio/s5p_gpio.c b/drivers/gpio/s5p_gpio.c
index 7eeb96d..13aefba 100644
--- a/drivers/gpio/s5p_gpio.c
+++ b/drivers/gpio/s5p_gpio.c
@@ -9,6 +9,11 @@
#include <asm/io.h>
#include <asm/gpio.h>
+#define S5P_GPIO_GET_BANK(x) ((x >> S5P_GPIO_BANK_SHIFT) \
+ & S5P_GPIO_BANK_MASK)
+
+#define S5P_GPIO_GET_PIN(x) (x & S5P_GPIO_PIN_MASK)
+
#define CON_MASK(x) (0xf << ((x) << 2))
#define CON_SFR(x, v) ((v) << ((x) << 2))
@@ -124,17 +129,15 @@ void s5p_gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode)
struct s5p_gpio_bank *s5p_gpio_get_bank(unsigned gpio)
{
- int bank;
- unsigned g = gpio - s5p_gpio_part_max(gpio);
+ unsigned bank = S5P_GPIO_GET_BANK(gpio);
+ unsigned base = s5p_gpio_base(gpio);
- bank = g / GPIO_PER_BANK;
- bank *= sizeof(struct s5p_gpio_bank);
- return (struct s5p_gpio_bank *) (s5p_gpio_base(gpio) + bank);
+ return (struct s5p_gpio_bank *) (base + bank);
}
int s5p_gpio_get_pin(unsigned gpio)
{
- return gpio % GPIO_PER_BANK;
+ return S5P_GPIO_GET_PIN(gpio);
}
/* Common GPIO API */
diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h
index 0590d20..4cdf937 100644
--- a/include/configs/s5p_goni.h
+++ b/include/configs/s5p_goni.h
@@ -208,8 +208,8 @@
/*
* I2C Settings
*/
-#define CONFIG_SOFT_I2C_GPIO_SCL s5pc110_gpio_get_nr(j4, 3)
-#define CONFIG_SOFT_I2C_GPIO_SDA s5pc110_gpio_get_nr(j4, 0)
+#define CONFIG_SOFT_I2C_GPIO_SCL s5pc110_gpio_get(j4, 3)
+#define CONFIG_SOFT_I2C_GPIO_SDA s5pc110_gpio_get(j4, 0)
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h
index d9e4c56..02a1c99 100644
--- a/include/configs/s5pc210_universal.h
+++ b/include/configs/s5pc210_universal.h
@@ -229,8 +229,8 @@
/*
* I2C Settings
*/
-#define CONFIG_SOFT_I2C_GPIO_SCL exynos4_gpio_part1_get_nr(b, 7)
-#define CONFIG_SOFT_I2C_GPIO_SDA exynos4_gpio_part1_get_nr(b, 6)
+#define CONFIG_SOFT_I2C_GPIO_SCL exynos4_gpio_get(1, b, 7)
+#define CONFIG_SOFT_I2C_GPIO_SDA exynos4_gpio_get(1, b, 6)
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
@@ -253,10 +253,10 @@
*/
#define CONFIG_SOFT_SPI
#define CONFIG_SOFT_SPI_MODE SPI_MODE_3
-#define CONFIG_SOFT_SPI_GPIO_SCLK exynos4_gpio_part2_get_nr(y3, 1)
-#define CONFIG_SOFT_SPI_GPIO_MOSI exynos4_gpio_part2_get_nr(y3, 3)
-#define CONFIG_SOFT_SPI_GPIO_MISO exynos4_gpio_part2_get_nr(y3, 0)
-#define CONFIG_SOFT_SPI_GPIO_CS exynos4_gpio_part2_get_nr(y4, 3)
+#define CONFIG_SOFT_SPI_GPIO_SCLK exynos4_gpio_get(2, y3, 1)
+#define CONFIG_SOFT_SPI_GPIO_MOSI exynos4_gpio_get(2, y3, 3)
+#define CONFIG_SOFT_SPI_GPIO_MISO exynos4_gpio_get(2, y3, 0)
+#define CONFIG_SOFT_SPI_GPIO_CS exynos4_gpio_get(2, y4, 3)
#define SPI_DELAY udelay(1)
#undef SPI_INIT
diff --git a/include/configs/trats.h b/include/configs/trats.h
index 8ff9800..2b07fe0 100644
--- a/include/configs/trats.h
+++ b/include/configs/trats.h
@@ -283,12 +283,12 @@
#include <asm/arch/gpio.h>
/* I2C PMIC */
-#define CONFIG_SOFT_I2C_I2C5_SCL exynos4_gpio_part1_get_nr(b, 7)
-#define CONFIG_SOFT_I2C_I2C5_SDA exynos4_gpio_part1_get_nr(b, 6)
+#define CONFIG_SOFT_I2C_I2C5_SCL exynos4_gpio_get(1, b, 7)
+#define CONFIG_SOFT_I2C_I2C5_SDA exynos4_gpio_get(1, b, 6)
/* I2C FG */
-#define CONFIG_SOFT_I2C_I2C9_SCL exynos4_gpio_part2_get_nr(y4, 1)
-#define CONFIG_SOFT_I2C_I2C9_SDA exynos4_gpio_part2_get_nr(y4, 0)
+#define CONFIG_SOFT_I2C_I2C9_SCL exynos4_gpio_get(2, y4, 1)
+#define CONFIG_SOFT_I2C_I2C9_SDA exynos4_gpio_get(2, y4, 0)
#define CONFIG_SOFT_I2C_GPIO_SCL get_multi_scl_pin()
#define CONFIG_SOFT_I2C_GPIO_SDA get_multi_sda_pin()
diff --git a/include/configs/trats2.h b/include/configs/trats2.h
index c49a969e..f7d76f8 100644
--- a/include/configs/trats2.h
+++ b/include/configs/trats2.h
@@ -293,12 +293,12 @@
#define CONFIG_SOFT_I2C_MULTI_BUS
#define CONFIG_SYS_MAX_I2C_BUS 15
-#define CONFIG_SOFT_I2C_I2C5_SCL exynos4x12_gpio_part1_get_nr(d0, 3)
-#define CONFIG_SOFT_I2C_I2C5_SDA exynos4x12_gpio_part1_get_nr(d0, 2)
-#define CONFIG_SOFT_I2C_I2C9_SCL exynos4x12_gpio_part1_get_nr(f1, 4)
-#define CONFIG_SOFT_I2C_I2C9_SDA exynos4x12_gpio_part1_get_nr(f1, 5)
-#define CONFIG_SOFT_I2C_I2C10_SCL exynos4x12_gpio_part2_get_nr(m2, 1)
-#define CONFIG_SOFT_I2C_I2C10_SDA exynos4x12_gpio_part2_get_nr(m2, 0)
+#define CONFIG_SOFT_I2C_I2C5_SCL exynos4x12_gpio_get(1, d0, 3)
+#define CONFIG_SOFT_I2C_I2C5_SDA exynos4x12_gpio_get(1, d0, 2)
+#define CONFIG_SOFT_I2C_I2C9_SCL exynos4x12_gpio_get(1, f1, 4)
+#define CONFIG_SOFT_I2C_I2C9_SDA exynos4x12_gpio_get(1, f1, 5)
+#define CONFIG_SOFT_I2C_I2C10_SCL exynos4x12_gpio_get(2, m2, 1)
+#define CONFIG_SOFT_I2C_I2C10_SDA exynos4x12_gpio_get(2, m2, 0)
#define CONFIG_SOFT_I2C_GPIO_SCL get_multi_scl_pin()
#define CONFIG_SOFT_I2C_GPIO_SDA get_multi_sda_pin()
#define I2C_INIT multi_i2c_init()
--
1.7.9.5
next prev parent reply other threads:[~2013-12-03 18:03 UTC|newest]
Thread overview: 147+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-03 18:03 [U-Boot] [PATCH 00/10] Introduce Samsung misc file and LCD menu Przemyslaw Marczak
2013-12-03 18:03 ` Przemyslaw Marczak [this message]
2013-12-03 18:03 ` [U-Boot] [PATCH 02/10] trats2: Code cleanup Przemyslaw Marczak
2013-12-03 18:03 ` [U-Boot] [PATCH 03/10] samsung: common: Add misc file and common function misc_init_r() Przemyslaw Marczak
2013-12-11 8:16 ` Minkyu Kang
2013-12-11 10:00 ` Przemyslaw Marczak
2013-12-03 18:03 ` [U-Boot] [PATCH 04/10] samsung: misc: move display logo function to misc.c file Przemyslaw Marczak
2013-12-10 9:47 ` 황형원
2013-12-11 8:16 ` Minkyu Kang
2013-12-03 18:03 ` [U-Boot] [PATCH 05/10] lib: tizen: add Tizen 16bpp logo support Przemyslaw Marczak
[not found] ` <01a201cef56e$6f3e3ac0$4dbab040$@samsung.com>
2013-12-10 7:41 ` Przemyslaw Marczak
[not found] ` <20131211105613.201446ff68c75747d836fab7@samsung.com>
2013-12-11 13:48 ` Przemyslaw Marczak
2013-12-03 18:03 ` [U-Boot] [PATCH 06/10] video: exynos: fimd: always use 16bpp display mode Przemyslaw Marczak
[not found] ` <018001cef563$f1baed50$d530c7f0$@samsung.com>
2013-12-10 5:47 ` [U-Boot] FW: " Donghwa Lee
2013-12-10 8:15 ` Przemyslaw Marczak
2013-12-10 8:55 ` Ajay kumar
2013-12-10 9:02 ` [U-Boot] " Donghwa Lee
2013-12-03 18:03 ` [U-Boot] [PATCH 07/10] samsung: misc: Add LCD download menu Przemyslaw Marczak
2013-12-11 8:15 ` Minkyu Kang
2013-12-11 12:38 ` Przemyslaw Marczak
2013-12-03 18:03 ` [U-Boot] [PATCH 08/10] Trats: add LCD download menu support Przemyslaw Marczak
2013-12-04 6:08 ` Lukasz Majewski
2013-12-11 8:15 ` Minkyu Kang
2013-12-11 13:32 ` Przemyslaw Marczak
2013-12-03 18:03 ` [U-Boot] [PATCH 09/10] trats2: " Przemyslaw Marczak
2013-12-03 18:03 ` [U-Boot] [PATCH 10/10] universal: " Przemyslaw Marczak
2013-12-04 1:29 ` [U-Boot] [PATCH 00/10] Introduce Samsung misc file and LCD menu TigerLiu at viatech.com.cn
2013-12-04 12:11 ` Przemyslaw Marczak
2013-12-18 18:31 ` [U-Boot] [PATCH v2 00/13] " Przemyslaw Marczak
2013-12-18 18:31 ` [U-Boot] [PATCH v2 01/13] s5p: gpio: change gpio coding method for s5p gpio Przemyslaw Marczak
2014-01-02 6:35 ` Minkyu Kang
2014-01-02 7:55 ` Przemyslaw Marczak
2013-12-18 18:31 ` [U-Boot] [PATCH v2 02/13] trats: add optional cflags to board object file Przemyslaw Marczak
2014-01-02 6:35 ` Minkyu Kang
2014-01-02 8:03 ` Przemyslaw Marczak
2013-12-18 18:31 ` [U-Boot] [PATCH v2 03/13] trats2: Code cleanup Przemyslaw Marczak
2013-12-18 18:31 ` [U-Boot] [PATCH v2 04/13] samsung: common: Add misc file and common function misc_init_r() Przemyslaw Marczak
2014-01-02 6:37 ` Minkyu Kang
2014-01-02 8:09 ` Przemyslaw Marczak
2013-12-18 18:31 ` [U-Boot] [PATCH v2 05/13] samsung: misc: move display logo function to misc.c file Przemyslaw Marczak
2013-12-18 18:31 ` [U-Boot] [PATCH v2 06/13] common: makefile: Add optional cflags to object: common/lcd.o Przemyslaw Marczak
2013-12-19 5:44 ` Inha Song
2014-01-02 6:35 ` Minkyu Kang
2013-12-18 18:31 ` [U-Boot] [PATCH v2 07/13] lib: tizen: change Tizen logo with the new one Przemyslaw Marczak
2013-12-19 5:40 ` 황형원
2013-12-19 10:40 ` Przemyslaw Marczak
2013-12-20 5:07 ` Hyungwon Hwang
2013-12-20 11:50 ` Przemyslaw Marczak
2013-12-25 23:39 ` Hyungwon Hwang
2013-12-30 15:46 ` Przemyslaw Marczak
2013-12-18 18:31 ` [U-Boot] [PATCH v2 08/13] video: exynos: fimd: add support for various display color modes Przemyslaw Marczak
2013-12-19 5:08 ` Donghwa Lee
2013-12-18 18:31 ` [U-Boot] [PATCH v2 09/13] samsung: boards: update display configs with 16bpp mode Przemyslaw Marczak
2013-12-18 18:31 ` [U-Boot] [PATCH v2 10/13] samsung: misc: Add LCD download menu Przemyslaw Marczak
2013-12-18 18:31 ` [U-Boot] [PATCH v2 11/13] Trats: add LCD download menu support Przemyslaw Marczak
2013-12-18 18:31 ` [U-Boot] [PATCH v2 12/13] trats2: " Przemyslaw Marczak
2014-01-02 6:34 ` Minkyu Kang
2013-12-18 18:31 ` [U-Boot] [PATCH v2 13/13] universal: " Przemyslaw Marczak
2014-01-03 16:43 ` [U-Boot] [PATCH v3 01/12] s5p: gpio: change gpio coding method for s5p gpio Przemyslaw Marczak
2014-01-03 16:43 ` [U-Boot] [PATCH v3 02/12] trats2: Code cleanup Przemyslaw Marczak
2014-01-03 16:43 ` [U-Boot] [PATCH v3 03/12] samsung: common: Add misc file and common function misc_init_r() Przemyslaw Marczak
2014-01-03 16:43 ` [U-Boot] [PATCH v3 04/12] samsung: misc: move display logo function to misc.c file Przemyslaw Marczak
2014-01-03 16:43 ` [U-Boot] [PATCH v3 05/12] common: lcd.c: fix data abort exception when try to access bmp header Przemyslaw Marczak
2014-01-06 5:05 ` Minkyu Kang
2014-01-06 8:54 ` Anatolij Gustschin
2014-01-03 16:43 ` [U-Boot] [PATCH v3 06/12] lib: tizen: change Tizen logo with the new one Przemyslaw Marczak
2014-01-03 16:43 ` [U-Boot] [PATCH v3 07/12] video: exynos: fimd: add support for various display color modes Przemyslaw Marczak
2014-01-03 16:43 ` [U-Boot] [PATCH v3 08/12] samsung: boards: update display configs with 16bpp mode Przemyslaw Marczak
2014-01-03 16:43 ` [U-Boot] [PATCH v3 09/12] samsung: misc: Add LCD download menu Przemyslaw Marczak
2014-01-06 11:38 ` Minkyu Kang
2014-01-07 12:46 ` Przemyslaw Marczak
2014-01-03 16:43 ` [U-Boot] [PATCH v3 10/12] Trats: add LCD download menu support Przemyslaw Marczak
2014-01-03 17:20 ` Przemyslaw Marczak
2014-01-03 16:43 ` [U-Boot] [PATCH v3 11/12] trats2: " Przemyslaw Marczak
2014-01-03 17:21 ` Przemyslaw Marczak
2014-01-06 11:37 ` Minkyu Kang
2014-01-07 12:54 ` Przemyslaw Marczak
2014-01-08 1:56 ` Minkyu Kang
2014-01-08 13:47 ` Przemyslaw Marczak
2014-01-03 16:43 ` [U-Boot] [PATCH v3 12/12] universal: " Przemyslaw Marczak
2014-01-03 17:23 ` Przemyslaw Marczak
2014-01-03 17:31 ` Przemyslaw Marczak
2014-01-06 11:37 ` [U-Boot] [PATCH v3 01/12] s5p: gpio: change gpio coding method for s5p gpio Minkyu Kang
2014-01-07 12:56 ` Przemyslaw Marczak
2014-01-09 11:23 ` [U-Boot] [PATCH v4 00/12] Introduce Samsung misc file and LCD menu Przemyslaw Marczak
2014-01-09 11:23 ` [U-Boot] [PATCH v4 01/12] s5p: gpio: change gpio coding method for s5p gpio Przemyslaw Marczak
2014-01-09 11:23 ` [U-Boot] [PATCH v4 02/12] trats2: Code cleanup Przemyslaw Marczak
2014-01-09 12:59 ` Jaehoon Chung
2014-01-09 11:23 ` [U-Boot] [PATCH v4 03/12] samsung: common: Add misc file and common function misc_init_r() Przemyslaw Marczak
2014-01-09 13:00 ` Jaehoon Chung
2014-01-09 11:23 ` [U-Boot] [PATCH v4 04/12] samsung: misc: move display logo function to misc.c file Przemyslaw Marczak
2014-01-09 11:23 ` [U-Boot] [PATCH v4 05/12] common: lcd.c: fix data abort exception when try to access bmp header Przemyslaw Marczak
2014-01-09 11:23 ` [U-Boot] [PATCH v4 06/12] lib: tizen: change Tizen logo with the new one Przemyslaw Marczak
2014-01-10 7:09 ` Hyungwon Hwang
2014-01-10 9:26 ` Hyungwon Hwang
2014-01-10 9:35 ` Przemyslaw Marczak
2014-01-09 11:23 ` [U-Boot] [PATCH v4 07/12] video: exynos: fimd: add support for various display color modes Przemyslaw Marczak
2014-01-09 11:23 ` [U-Boot] [PATCH v4 08/12] samsung: boards: update display configs with 16bpp mode Przemyslaw Marczak
2014-01-09 11:23 ` [U-Boot] [PATCH v4 09/12] samsung: misc: Add LCD download menu Przemyslaw Marczak
2014-01-10 1:37 ` Minkyu Kang
2014-01-10 9:37 ` Przemyslaw Marczak
2014-01-10 9:43 ` Minkyu Kang
2014-01-10 9:48 ` Przemyslaw Marczak
2014-01-09 11:23 ` [U-Boot] [PATCH v4 10/12] Trats: add LCD download menu support Przemyslaw Marczak
2014-01-09 11:23 ` [U-Boot] [PATCH v4 11/12] trats2: " Przemyslaw Marczak
2014-01-09 11:23 ` [U-Boot] [PATCH v4 12/12] universal: " Przemyslaw Marczak
2014-01-10 6:45 ` [U-Boot] [PATCH v4 00/12] Introduce Samsung misc file and LCD menu Hyungwon Hwang
2014-01-10 7:06 ` Hyungwon Hwang
2014-01-10 9:31 ` Przemyslaw Marczak
2014-01-10 14:31 ` [U-Boot] [PATCH v5 " Przemyslaw Marczak
2014-01-10 14:31 ` [U-Boot] [PATCH v5 01/12] s5p: gpio: change gpio coding method for s5p gpio Przemyslaw Marczak
2014-01-10 14:31 ` [U-Boot] [PATCH v5 02/12] trats2: Code cleanup Przemyslaw Marczak
2014-01-10 14:31 ` [U-Boot] [PATCH v5 03/12] samsung: common: Add misc file and common function misc_init_r() Przemyslaw Marczak
2014-01-14 13:55 ` Przemyslaw Marczak
2014-01-15 7:35 ` Minkyu Kang
2014-01-15 7:51 ` Przemyslaw Marczak
2014-01-15 8:08 ` Piotr Wilczek
2014-01-15 8:18 ` Przemyslaw Marczak
2014-01-17 6:26 ` Minkyu Kang
2014-01-17 8:36 ` Przemyslaw Marczak
2014-01-20 7:06 ` Minkyu Kang
2014-01-10 14:31 ` [U-Boot] [PATCH v5 04/12] samsung: misc: move display logo function to misc.c file Przemyslaw Marczak
2014-01-14 3:41 ` Jaehoon Chung
2014-01-14 8:02 ` Przemyslaw Marczak
2014-01-14 8:55 ` Minkyu Kang
2014-01-15 10:20 ` Przemyslaw Marczak
2014-01-10 14:31 ` [U-Boot] [PATCH v5 05/12] common: lcd.c: fix data abort exception when try to access bmp header Przemyslaw Marczak
2014-01-10 14:32 ` [U-Boot] [PATCH v5 06/12] lib: tizen: change Tizen logo with the new one Przemyslaw Marczak
2014-01-10 14:32 ` [U-Boot] [PATCH v5 07/12] video: exynos: fimd: add support for various display color modes Przemyslaw Marczak
2014-01-10 14:32 ` [U-Boot] [PATCH v5 08/12] samsung: boards: update display configs with 16bpp mode Przemyslaw Marczak
2014-01-10 14:32 ` [U-Boot] [PATCH v5 09/12] samsung: misc: Add LCD download menu Przemyslaw Marczak
2014-01-10 14:32 ` [U-Boot] [PATCH v5 10/12] Trats: add LCD download menu support Przemyslaw Marczak
2014-01-10 14:32 ` [U-Boot] [PATCH v5 11/12] trats2: " Przemyslaw Marczak
2014-01-10 14:32 ` [U-Boot] [PATCH v5 12/12] universal: " Przemyslaw Marczak
2014-01-22 10:24 ` [U-Boot] [PATCH v6 00/11] Introduce Samsung misc file and LCD menu Przemyslaw Marczak
2014-01-22 10:24 ` [U-Boot] [PATCH v6 01/11] s5p: gpio: change gpio coding method for s5p gpio Przemyslaw Marczak
2014-01-22 10:24 ` [U-Boot] [PATCH v6 02/11] trats2: Code cleanup Przemyslaw Marczak
2014-01-22 10:24 ` [U-Boot] [PATCH v6 03/11] samsung: common: Add file for common functions, draw_logo() cleanup Przemyslaw Marczak
2014-01-22 10:24 ` [U-Boot] [PATCH v6 04/11] common: lcd.c: fix data abort exception when try to access bmp header Przemyslaw Marczak
2014-01-22 10:24 ` [U-Boot] [PATCH v6 05/11] lib: tizen: change Tizen logo with the new one Przemyslaw Marczak
2014-01-22 10:24 ` [U-Boot] [PATCH v6 06/11] video: exynos: fimd: add support for various display color modes Przemyslaw Marczak
2014-01-22 10:24 ` [U-Boot] [PATCH v6 07/11] samsung: boards: update display configs with 16bpp mode Przemyslaw Marczak
2014-01-22 10:24 ` [U-Boot] [PATCH v6 08/11] samsung: misc: Add LCD download menu Przemyslaw Marczak
2014-01-22 10:24 ` [U-Boot] [PATCH v6 09/11] trats: add LCD download menu support Przemyslaw Marczak
2014-01-22 10:24 ` [U-Boot] [PATCH v6 10/11] trats2: " Przemyslaw Marczak
2014-01-22 10:24 ` [U-Boot] [PATCH v6 11/11] universal: " Przemyslaw Marczak
2014-02-03 7:06 ` [U-Boot] [PATCH v6 00/11] Introduce Samsung misc file and LCD menu Minkyu Kang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1386093806-2948-2-git-send-email-p.marczak@samsung.com \
--to=p.marczak@samsung.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.