All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rahul Sharma <rahul.sharma@samsung.com>
To: linux-samsung-soc@vger.kernel.org
Cc: kgene.kim@samsung.com, tomasz.figa@gmail.com, joshi@samsung.com,
	r.sh.open@gmail.com, Rahul Sharma <rahul.sharma@samsung.com>
Subject: [PATCH v2 2/3] ARM: dts: add dts files for exynos5260 SoC
Date: Wed, 05 Feb 2014 11:47:58 +0530	[thread overview]
Message-ID: <1391581079-20086-3-git-send-email-rahul.sharma@samsung.com> (raw)
In-Reply-To: <1391581079-20086-1-git-send-email-rahul.sharma@samsung.com>

The patch adds the dts files for exynos5260.

Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
---
 arch/arm/boot/dts/exynos5260-pinctrl.dtsi |  572 +++++++++++++++++++++++++++++
 arch/arm/boot/dts/exynos5260.dtsi         |  317 ++++++++++++++++
 2 files changed, 889 insertions(+)
 create mode 100644 arch/arm/boot/dts/exynos5260-pinctrl.dtsi
 create mode 100644 arch/arm/boot/dts/exynos5260.dtsi

diff --git a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
new file mode 100644
index 0000000..3f2c5c4
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
@@ -0,0 +1,572 @@
+/*
+ * Samsung's Exynos5260 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos5260 SoC pin-mux and pin-config options are listed as device
+ * tree nodes are listed in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/ {
+	pinctrl@11600000 {
+		gpa0: gpa0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpa1: gpa1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpa2: gpa2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb0: gpb0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb1: gpb1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb2: gpb2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb3: gpb3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb4: gpb4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb5: gpb5 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpd0: gpd0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpd1: gpd1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpd2: gpd2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpe0: gpe0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpe1: gpe1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf0: gpf0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf1: gpf1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpk0: gpk0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpx0: gpx0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpx1: gpx1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpx2: gpx2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpx3: gpx3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		uart0_data: uart0-data {
+			samsung,pins = "gpa0-0", "gpa0-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart0_fctl: uart0-fctl {
+			samsung,pins = "gpa0-2", "gpa0-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart1_data: uart1-data {
+			samsung,pins = "gpa1-0", "gpa1-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart1_fctl: uart1-fctl {
+			samsung,pins = "gpa1-2", "gpa1-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart2_data: uart2-data {
+			samsung,pins = "gpa1-4", "gpa1-5";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		spi0_bus: spi0-bus {
+			samsung,pins = "gpa2-0", "gpa2-1", "gpa2-2", "gpa2-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		spi1_bus: spi1-bus {
+			samsung,pins = "gpa2-5", "gpa2-6", "gpa2-7";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		usb3_vbus0_en: usb3-vbus0-en {
+			samsung,pins = "gpa2-4";
+			samsung,pin-function = <1>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2s1_bus: i2s1-bus {
+			samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+					"gpb0-4";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pcm1_bus: pcm1-bus {
+			samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+					"gpb0-4";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		spdif1_bus: spdif1-bus {
+			samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		spi2_bus: spi2-bus {
+			samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c0_hs_bus: i2c0-hs-bus {
+			samsung,pins = "gpb3-0", "gpb3-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c1_hs_bus: i2c1-hs-bus {
+			samsung,pins = "gpb3-2", "gpb3-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c2_hs_bus: i2c2-hs-bus {
+			samsung,pins = "gpb3-4", "gpb3-5";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c3_hs_bus: i2c3-hs-bus {
+			samsung,pins = "gpb3-6", "gpb3-7";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c4_bus: i2c4-bus {
+			samsung,pins = "gpb4-0", "gpb4-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c5_bus: i2c5-bus {
+			samsung,pins = "gpb4-2", "gpb4-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c6_bus: i2c6-bus {
+			samsung,pins = "gpb4-4", "gpb4-5";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c7_bus: i2c7-bus {
+			samsung,pins = "gpb4-6", "gpb4-7";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c8_bus: i2c8-bus {
+			samsung,pins = "gpb5-0", "gpb5-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c9_bus: i2c9-bus {
+			samsung,pins = "gpb5-2", "gpb5-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c10_bus: i2c10-bus {
+			samsung,pins = "gpb5-4", "gpb5-5";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c11_bus: i2c11-bus {
+			samsung,pins = "gpb5-6", "gpb5-7";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		cam_gpio_a: cam-gpio-a {
+			samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
+				"gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
+				"gpe1-0", "gpe1-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		cam_gpio_b: cam-gpio-b {
+			samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
+				"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		cam_i2c1_bus: cam-i2c1-bus {
+			samsung,pins = "gpf0-2", "gpf0-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		cam_i2c0_bus: cam-i2c0-bus {
+			samsung,pins = "gpf0-0", "gpf0-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		cam_spi0_bus: cam-spi0-bus {
+			samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		cam_spi1_bus: cam-spi1-bus {
+			samsung,pins = "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+	};
+
+	pinctrl@12290000 {
+		gpc0: gpc0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc1: gpc1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc2: gpc2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc3: gpc3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc4: gpc4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		sd0_clk: sd0-clk {
+			samsung,pins = "gpc0-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd0_cmd: sd0-cmd {
+			samsung,pins = "gpc0-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd0_bus1: sd0-bus-width1 {
+			samsung,pins = "gpc0-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd0_bus4: sd0-bus-width4 {
+			samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd0_bus8: sd0-bus-width8 {
+			samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd0_rdqs: sd0-rdqs {
+			samsung,pins = "gpc0-6";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_clk: sd1-clk {
+			samsung,pins = "gpc1-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_cmd: sd1-cmd {
+			samsung,pins = "gpc1-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_bus1: sd1-bus-width1 {
+			samsung,pins = "gpc1-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_bus4: sd1-bus-width4 {
+			samsung,pins = "gpc1-3", "gpc1-4", "gpc1-5";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_bus8: sd1-bus-width8 {
+			samsung,pins = "gpc4-0", "gpc4-1", "gpc4-2", "gpc4-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_clk: sd2-clk {
+			samsung,pins = "gpc2-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_cmd: sd2-cmd {
+			samsung,pins = "gpc2-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_cd: sd2-cd {
+			samsung,pins = "gpc2-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_bus1: sd2-bus-width1 {
+			samsung,pins = "gpc2-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_bus4: sd2-bus-width4 {
+			samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+	};
+
+	pinctrl@128B0000 {
+		gpz0: gpz0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpz1: gpz1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi
new file mode 100644
index 0000000..32a95c7
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5260.dtsi
@@ -0,0 +1,317 @@
+/*
+ * SAMSUNG EXYNOS5260 SoC device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include "skeleton.dtsi"
+#include "exynos5260-pinctrl.dtsi"
+
+#include <dt-bindings/clk/exynos5260-clk.h>
+
+/ {
+	compatible = "samsung,exynos5260";
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_0;
+		pinctrl1 = &pinctrl_1;
+		pinctrl2 = &pinctrl_2;
+	};
+
+	chipid@10000000 {
+		compatible = "samsung,exynos4210-chipid";
+		reg = <0x10000000 0x100>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+			cci-control-port = <&cci_control1>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+			cci-control-port = <&cci_control1>;
+		};
+		cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x100>;
+			cci-control-port = <&cci_control0>;
+		};
+		cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x101>;
+			cci-control-port = <&cci_control0>;
+		};
+		cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x102>;
+			cci-control-port = <&cci_control0>;
+		};
+		cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x103>;
+			cci-control-port = <&cci_control0>;
+		};
+	};
+
+	cmus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		cmu_top: clock-controller@10010000 {
+			compatible = "exynos5260-cmu-top", "samsung,exynos5260-clock";
+			reg = <0x10010000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		cmu_peri: clock-controller@10200000 {
+			compatible = "exynos5260-cmu-peri", "samsung,exynos5260-clock";
+			reg = <0x10200000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		cmu_egl: clock-controller@10600000 {
+			compatible = "exynos5260-cmu-egl", "samsung,exynos5260-clock";
+			reg = <0x10600000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		cmu_kfc: clock-controller@10700000 {
+			compatible = "exynos5260-cmu-kfc", "samsung,exynos5260-clock";
+			reg = <0x10700000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		cmu_g2d: clock-controller@10A00000 {
+			compatible = "exynos5260-cmu-g2d", "samsung,exynos5260-clock";
+			reg = <0x10A00000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		cmu_mif: clock-controller@10CE0000 {
+			compatible = "exynos5260-cmu-mif", "samsung,exynos5260-clock";
+			reg = <0x10CE0000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		cmu_mfc: clock-controller@11090000 {
+			compatible = "exynos5260-cmu-mfc", "samsung,exynos5260-clock";
+			reg = <0x11090000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		cmu_g3d: clock-controller@11830000 {
+			compatible = "exynos5260-cmu-g3d", "samsung,exynos5260-clock";
+			reg = <0x11830000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		cmu_fsys: clock-controller@122E0000 {
+			compatible = "exynos5260-cmu-fsys", "samsung,exynos5260-clock";
+			reg = <0x122E0000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		cmu_aud: clock-controller@128C0000 {
+			compatible = "exynos5260-cmu-aud", "samsung,exynos5260-clock";
+			reg = <0x128C0000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		cmu_isp: clock-controller@133C0000 {
+			compatible = "exynos5260-cmu-isp", "samsung,exynos5260-clock";
+			reg = <0x133C0000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		cmu_gscl: clock-controller@13F00000 {
+			compatible = "exynos5260-cmu-gscl", "samsung,exynos5260-clock";
+			reg = <0x13F00000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		cmu_disp: clock-controller@14550000 {
+			compatible = "exynos5260-cmu-disp", "samsung,exynos5260-clock";
+			reg = <0x14550000 0x10000>;
+			#clock-cells = <1>;
+		};
+	};
+
+	gic: interrupt-controller@10481000 {
+		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		interrupt-controller;
+		reg = <0x10481000 0x1000>,
+			<0x10482000 0x1000>,
+			<0x10484000 0x2000>,
+			<0x10486000 0x2000>;
+		interrupts = <1 9 0xf04>;
+	};
+
+	mct@100B0000 {
+		compatible = "samsung,exynos4210-mct";
+		reg = <0x100B0000 0x1000>;
+		interrupt-controller;
+		#interrups-cells = <1>;
+		interrupt-parent = <&mct_map>;
+		interrupts = <0>, <1>, <2>, <3>,
+				<4>, <5>, <6>, <7>,
+				<8>, <9>, <10>, <11>;
+		clocks = <&cmu_top FIN_PLL>, <&cmu_peri PERI_CLK_MCT>;
+		clock-names = "fin_pll", "mct";
+
+		mct_map: mct-map {
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <0 &gic 0 104 0>,
+					<1 &gic 0 105 0>,
+					<2 &gic 0 106 0>,
+					<3 &gic 0 107 0>,
+					<4 &gic 0 122 0>,
+					<5 &gic 0 123 0>,
+					<6 &gic 0 124 0>,
+					<7 &gic 0 125 0>,
+					<8 &gic 0 126 0>,
+					<9 &gic 0 127 0>,
+					<10 &gic 0 128 0>,
+					<11 &gic 0 129 0>;
+		};
+	};
+
+	cci@10F00000 {
+		compatible = "arm,cci-400";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x10F00000 0x1000>;
+		ranges = <0x0 0x10F00000 0x6000>;
+
+		cci_control0: slave-if@4000 {
+			compatible = "arm,cci-400-ctrl-if";
+			interface-type = "ace";
+			reg = <0x4000 0x1000>;
+		};
+
+		cci_control1: slave-if@5000 {
+			compatible = "arm,cci-400-ctrl-if";
+			interface-type = "ace";
+			reg = <0x5000 0x1000>;
+		};
+	};
+
+	pinctrl_0: pinctrl@11600000 {
+		compatible = "samsung,exynos5260-pinctrl";
+		reg = <0x11600000 0x1000>;
+		interrupts = <0 79 0>;
+
+		wakeup-interrupt-controller {
+			compatible = "samsung,exynos4210-wakeup-eint";
+			interrupt-parent = <&gic>;
+			interrupts = <0 32 0>;
+		};
+	};
+
+	pinctrl_1: pinctrl@12290000 {
+		compatible = "samsung,exynos5260-pinctrl";
+		reg = <0x12290000 0x1000>;
+		interrupts = <0 157 0>;
+	};
+
+	pinctrl_2: pinctrl@128B0000 {
+		compatible = "samsung,exynos5260-pinctrl";
+		reg = <0x128B0000 0x1000>;
+		interrupts = <0 243 0>;
+	};
+
+	serial@12C00000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x12C00000 0x100>;
+		interrupts = <0 146 0>;
+		clocks = <&cmu_peri PERI_CLK_UART0>, <&cmu_peri PERI_SCLK_UART0>;
+		clock-names = "uart", "clk_uart_baud0";
+		status = "disabled";
+	};
+
+	serial@12C10000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x12C10000 0x100>;
+		interrupts = <0 147 0>;
+		clocks = <&cmu_peri PERI_CLK_UART1>, <&cmu_peri PERI_SCLK_UART1>;
+		clock-names = "uart", "clk_uart_baud0";
+		status = "disabled";
+	};
+
+	serial@12C20000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x12C20000 0x100>;
+		interrupts = <0 148 0>;
+		clocks = <&cmu_peri PERI_CLK_UART2>, <&cmu_peri PERI_SCLK_UART2>;
+		clock-names = "uart", "clk_uart_baud0";
+		status = "disabled";
+	};
+
+	serial@12860000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x12860000 0x100>;
+		interrupts = <0 145 0>;
+		clocks = <&cmu_aud AUD_CLK_AUD_UART>, <&cmu_aud AUD_SCLK_AUD_UART>;
+		clock-names = "uart", "clk_uart_baud0";
+		status = "disabled";
+	};
+
+	mmc_0: mmc0@12140000 {
+		compatible = "samsung,exynos5250-dw-mshc";
+		reg = <0x12140000 0x2000>;
+		interrupts = <0 156 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&cmu_fsys FSYS_CLK_MMC0>, <&cmu_top TOP_SCLK_MMC0>;
+		clock-names = "biu", "ciu";
+		fifo-depth = <0x40>;
+		status = "disabled";
+	};
+
+	mmc_1: mmc1@12150000 {
+		compatible = "samsung,exynos5250-dw-mshc";
+		reg = <0x12150000 0x2000>;
+		interrupts = <0 158 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&cmu_fsys FSYS_CLK_MMC1>, <&cmu_top TOP_SCLK_MMC1>;
+		clock-names = "biu", "ciu";
+		fifo-depth = <0x40>;
+		status = "disabled";
+	};
+
+	mmc_2: mmc2@12160000 {
+		compatible = "samsung,exynos5250-dw-mshc";
+		reg = <0x12160000 0x2000>;
+		interrupts = <0 159 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&cmu_fsys FSYS_CLK_MMC2>, <&cmu_top TOP_SCLK_MMC2>;
+		clock-names = "biu", "ciu";
+		fifo-depth = <0x40>;
+		status = "disabled";
+	};
+};
-- 
1.7.9.5

  parent reply	other threads:[~2014-02-05  6:18 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-02-05  6:17 [PATCH v2 0/3] exynos: arch: add support for exynos5260 SoC Rahul Sharma
2014-02-05  6:17 ` [PATCH v2 1/3] ARM: EXYNOS: initial board " Rahul Sharma
2014-02-05  6:17 ` Rahul Sharma [this message]
2014-02-05  6:17 ` [PATCH v2 3/3] ARM: dts: add dts files for xyref5260 board Rahul Sharma
  -- strict thread matches above, loose matches on Subject: below --
2014-02-05  5:16 [PATCH V2 0/3] exynos: arch: add support for exynos5260 SoC Rahul Sharma
2014-02-05  5:16 ` [PATCH V2 2/3] ARM: dts: add dts files " Rahul Sharma
2014-02-06 13:21   ` Tomasz Figa
2014-02-06 13:21     ` Tomasz Figa
2014-02-11  5:22     ` Rahul Sharma
2014-02-11  5:22       ` Rahul Sharma
2014-02-11 10:04       ` Tomasz Figa
2014-02-11 10:04         ` Tomasz Figa
2014-02-14  3:24         ` Rahul Sharma
2014-02-14  3:24           ` Rahul Sharma
2014-02-14 11:28           ` Rahul Sharma
2014-02-14 11:28             ` Rahul Sharma
     [not found]             ` <CAPdUM4Pr7UC3wzYMsO+sYQHRDGixSNsR3XQuHBomsi-H-dfOZw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-02-14 11:49               ` Tomasz Figa
2014-02-14 11:49                 ` Tomasz Figa

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1391581079-20086-3-git-send-email-rahul.sharma@samsung.com \
    --to=rahul.sharma@samsung.com \
    --cc=joshi@samsung.com \
    --cc=kgene.kim@samsung.com \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=r.sh.open@gmail.com \
    --cc=tomasz.figa@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.