From mboxrd@z Thu Jan 1 00:00:00 1970 From: swarren@wwwdotorg.org (Stephen Warren) Date: Tue, 11 Feb 2014 22:03:12 -0700 Subject: [PATCH 2/2] ARM: bcm2835: add unit address to all nodes w/ reg prop In-Reply-To: <1392181392-29694-1-git-send-email-swarren@wwwdotorg.org> References: <1392181392-29694-1-git-send-email-swarren@wwwdotorg.org> Message-ID: <1392181392-29694-2-git-send-email-swarren@wwwdotorg.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org DT nodes that contain a reg property should include a unit address in their name. Add the missing unit addresses. Signed-off-by: Stephen Warren --- arch/arm/boot/dts/bcm2835.dtsi | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index 5ceba45..9eadfb7 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -15,7 +15,7 @@ #size-cells = <1>; ranges = <0x7e000000 0x20000000 0x02000000>; - timer { + timer at 7e003000 { compatible = "brcm,bcm2835-system-timer"; reg = <0x7e003000 0x1000>; interrupts = <1 0>, <1 1>, <1 2>, <1 3>; @@ -43,24 +43,24 @@ brcm,dma-channel-mask = <0x7f35>; }; - intc: interrupt-controller { + intc: interrupt-controller at 7e00b200 { compatible = "brcm,bcm2835-armctrl-ic"; reg = <0x7e00b200 0x200>; interrupt-controller; #interrupt-cells = <2>; }; - watchdog { + watchdog at 7e100000 { compatible = "brcm,bcm2835-pm-wdt"; reg = <0x7e100000 0x28>; }; - rng { + rng at 7e104000 { compatible = "brcm,bcm2835-rng"; reg = <0x7e104000 0x10>; }; - gpio: gpio { + gpio: gpio at 7e200000 { compatible = "brcm,bcm2835-gpio"; reg = <0x7e200000 0xb4>; /* @@ -121,7 +121,7 @@ status = "disabled"; }; - sdhci: sdhci { + sdhci: sdhci at 7e300000 { compatible = "brcm,bcm2835-sdhci"; reg = <0x7e300000 0x100>; interrupts = <2 30>; @@ -139,7 +139,7 @@ status = "disabled"; }; - usb { + usb at 7e980000 { compatible = "brcm,bcm2835-usb"; reg = <0x7e980000 0x10000>; interrupts = <1 9>; @@ -155,21 +155,21 @@ #address-cells = <1>; #size-cells = <0>; - clk_mmc: mmc { + clk_mmc: clock at 0 { compatible = "fixed-clock"; reg = <0>; #clock-cells = <0>; clock-frequency = <100000000>; }; - clk_i2c: i2c { + clk_i2c: clock at 1 { compatible = "fixed-clock"; reg = <1>; #clock-cells = <0>; clock-frequency = <250000000>; }; - clk_spi: spi { + clk_spi: clock at 2 { compatible = "fixed-clock"; reg = <2>; #clock-cells = <0>; -- 1.8.3.2