All of lore.kernel.org
 help / color / mirror / Atom feed
From: Hannes Reinecke <hare@suse.de>
To: James Bottomley <jbottomley@parallels.com>
Cc: linux-scsi@vger.kernel.org, Christoph Hellwig <hch@infradead.org>,
	Hannes Reinecke <hare@suse.de>,
	Doug Gilbert <dgilbert@interlog.com>,
	Jeremy Linton <jlinton@tributary.com>
Subject: [PATCH 3/3] Add EVPD page 0x80 to sysfs
Date: Wed, 12 Feb 2014 11:24:31 +0100	[thread overview]
Message-ID: <1392200671-35624-4-git-send-email-hare@suse.de> (raw)
In-Reply-To: <1392200671-35624-1-git-send-email-hare@suse.de>

Some older devices (most notably tapes) will only report reliable
information in page 0x80 (Unit Serial Number). So export this
in the sysfs attribute 'serial'.

Cc: Doug Gilbert <dgilbert@interlog.com>
Cc: Jeremy Linton <jlinton@tributary.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
 drivers/scsi/scsi_scan.c   |  4 ++-
 drivers/scsi/scsi_sysfs.c  | 61 ++++++++++++++++++++++++++++++++++++++++++++++
 include/scsi/scsi_device.h |  3 +++
 3 files changed, 67 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 073fb84..d8f5036 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -929,8 +929,10 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result,
 	if (*bflags & BLIST_SKIP_VPD_PAGES)
 		sdev->skip_vpd_pages = 1;
 
-	if (sdev->scsi_level >= SCSI_3)
+	if (sdev->scsi_level >= SCSI_3) {
+		scsi_attach_serial(sdev);
 		scsi_attach_vpd_ident(sdev);
+	}
 
 	transport_configure_device(&sdev->sdev_gendev);
 
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index ec8f037..3a96e80 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -445,6 +445,7 @@ static void scsi_device_dev_release_usercontext(struct work_struct *work)
 
 	scsi_target_reap(scsi_target(sdev));
 
+	kfree(sdev->serial);
 	kfree(sdev->vpd_ident);
 	kfree(sdev->inquiry);
 	kfree(sdev);
@@ -785,6 +786,61 @@ store_queue_type_field(struct device *dev, struct device_attribute *attr,
 static DEVICE_ATTR(queue_type, S_IRUGO | S_IWUSR, show_queue_type_field,
 		   store_queue_type_field);
 
+void scsi_attach_serial(struct scsi_device *sdev)
+{
+	int ret;
+	int serial_len = 64;
+	unsigned char *buffer;
+retry:
+	buffer = kmalloc(serial_len, GFP_KERNEL);
+	if (!buffer)
+		return;
+
+	ret = scsi_get_vpd_page(sdev, 0x80, buffer, serial_len);
+	if (ret) {
+		kfree(buffer);
+		return;
+	}
+	if (buffer[1] != 0x80) {
+		kfree(buffer);
+		return;
+	}
+	if ((buffer[2] << 8) + buffer[3] + 4 > serial_len) {
+		serial_len = (buffer[2] << 8) + buffer[3] + 4;
+		kfree(buffer);
+		goto retry;
+	}
+	sdev->serial_len = (buffer[2] << 8) + buffer[3] + 4;
+	sdev->serial = buffer;
+}
+
+static ssize_t
+show_vpd_pg80(struct device *dev, struct device_attribute *attr,
+		   char *buf)
+{
+	struct scsi_device *sdev = to_scsi_device(dev);
+	int len = 0;
+	unsigned char *d;
+
+	if (!sdev->serial || sdev->serial_len < 4)
+		return -EINVAL;
+
+	len = sdev->serial_len - 4;
+	d = sdev->serial + 4;
+	while (d < sdev->serial + sdev->serial_len && *d == ' ') {
+		d++;
+		len--;
+	}
+
+	if (len) {
+		snprintf(buf, len + 2, "%s", (char *)d);
+		len += sprintf(buf + len, "\n");
+	}
+
+	return len;
+}
+static DEVICE_ATTR(serial, S_IRUGO, show_vpd_pg80, NULL);
+
 void scsi_attach_vpd_ident(struct scsi_device *sdev)
 {
 	int ret;
@@ -1169,6 +1225,10 @@ static umode_t scsi_sdev_attr_is_visible(struct kobject *kobj,
 	    !sdev->host->hostt->change_queue_type)
 		return S_IRUGO;
 
+	if (attr == &dev_attr_serial.attr &&
+	    !sdev->serial)
+		return 0;
+
 	if (attr == &dev_attr_vpd_pg83.attr &&
 	    !sdev->vpd_ident)
 		return 0;
@@ -1221,6 +1281,7 @@ static struct attribute *scsi_sdev_attrs[] = {
 	&dev_attr_queue_depth.attr,
 	&dev_attr_queue_type.attr,
 	&dev_attr_queue_ramp_up_period.attr,
+	&dev_attr_serial.attr,
 	&dev_attr_vpd_pg83.attr,
 	&dev_attr_ident_lun_vendor.attr,
 	&dev_attr_ident_lun_t10.attr,
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index 81c7900..054a321 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -115,6 +115,8 @@ struct scsi_device {
 	const char * rev;		/* ... "nullnullnullnull" before scan */
 	unsigned char vpd_ident_len;
 	unsigned char *vpd_ident;
+	unsigned char serial_len;
+	unsigned char *serial;
 	struct scsi_target      *sdev_target;   /* used only for single_lun */
 
 	unsigned int	sdev_bflags; /* black/white flags as also found in
@@ -311,6 +313,7 @@ extern int scsi_register_device_handler(struct scsi_device_handler *scsi_dh);
 extern void scsi_remove_device(struct scsi_device *);
 extern int scsi_unregister_device_handler(struct scsi_device_handler *scsi_dh);
 void scsi_attach_vpd_ident(struct scsi_device *sdev);
+void scsi_attach_serial(struct scsi_device *sdev);
 
 extern int scsi_device_get(struct scsi_device *);
 extern void scsi_device_put(struct scsi_device *);
-- 
1.7.12.4


  parent reply	other threads:[~2014-02-12 10:24 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-02-12 10:24 [PATCHv6 0/3] Display EVPD pages in sysfs Hannes Reinecke
2014-02-12 10:24 ` [PATCH 1/3] scsi_sysfs: Implement 'is_visible' callback Hannes Reinecke
2014-02-12 10:24 ` [PATCH 2/3] Add EVPD page 0x83 entries to sysfs Hannes Reinecke
2014-02-12 10:24 ` Hannes Reinecke [this message]
2014-02-13 10:07 [PATCHv7 0/3] Display EVPD pages in sysfs Hannes Reinecke
2014-02-13 10:07 ` [PATCH 3/3] Add EVPD page 0x80 to sysfs Hannes Reinecke
2014-02-13 10:27 [PATCHv7 0/3][Resend] Display EVPD pages in sysfs Hannes Reinecke
2014-02-13 10:28 ` [PATCH 3/3] Add EVPD page 0x80 to sysfs Hannes Reinecke

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1392200671-35624-4-git-send-email-hare@suse.de \
    --to=hare@suse.de \
    --cc=dgilbert@interlog.com \
    --cc=hch@infradead.org \
    --cc=jbottomley@parallels.com \
    --cc=jlinton@tributary.com \
    --cc=linux-scsi@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.