From mboxrd@z Thu Jan 1 00:00:00 1970 From: Guenter Roeck Date: Sun, 16 Feb 2014 02:16:11 +0000 Subject: [lm-sensors] [PATCH 2/3] hwmon: (ltc4245) Associate log messages with hwmon device Message-Id: <1392516972-27576-2-git-send-email-linux@roeck-us.net> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org Since sysfs attributes are not attached to the hwmon device, it makes sense to associate log messages with the hwmon device as well. Signed-off-by: Guenter Roeck --- drivers/hwmon/ltc4245.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/hwmon/ltc4245.c b/drivers/hwmon/ltc4245.c index 2c6da5d..0a3eddb 100644 --- a/drivers/hwmon/ltc4245.c +++ b/drivers/hwmon/ltc4245.c @@ -95,7 +95,7 @@ static void ltc4245_update_gpios(struct device *dev) * readings as stale by setting them to -EAGAIN */ if (time_after(jiffies, data->last_updated + 5 * HZ)) { - dev_dbg(&client->dev, "Marking GPIOs invalid\n"); + dev_dbg(dev, "Marking GPIOs invalid\n"); for (i = 0; i < ARRAY_SIZE(data->gpios); i++) data->gpios[i] = -EAGAIN; } @@ -141,7 +141,7 @@ static struct ltc4245_data *ltc4245_update_device(struct device *dev) if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { - dev_dbg(&client->dev, "Starting ltc4245 update\n"); + dev_dbg(dev, "Starting ltc4245 update\n"); /* Read control registers -- 0x00 to 0x07 */ for (i = 0; i < ARRAY_SIZE(data->cregs); i++) { -- 1.7.9.7 _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors