From mboxrd@z Thu Jan 1 00:00:00 1970 From: Florian Fainelli Subject: [PATCH] Documentation: broadcom-bcmgenet: fix address and cells properties Date: Mon, 17 Feb 2014 16:27:35 -0800 Message-ID: <1392683255-28136-1-git-send-email-f.fainelli@gmail.com> Mime-Version: 1.0 Content-Type: text/plain Cc: , , "Florian Fainelli" To: Return-path: Received: from mail-gw2-out.broadcom.com ([216.31.210.63]:34590 "EHLO mail-gw2-out.broadcom.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752869AbaBRA16 (ORCPT ); Mon, 17 Feb 2014 19:27:58 -0500 Sender: netdev-owner@vger.kernel.org List-ID: This patch fixes a typo in the Device Tree binding for the leading '#'. Reported-by: Sergei Shtylyov Signed-off-by: Florian Fainelli --- Documentation/devicetree/bindings/net/broadcom-bcmgenet.txt | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/Documentation/devicetree/bindings/net/broadcom-bcmgenet.txt b/Documentation/devicetree/bindings/net/broadcom-bcmgenet.txt index 88c3d04..25339ee 100644 --- a/Documentation/devicetree/bindings/net/broadcom-bcmgenet.txt +++ b/Documentation/devicetree/bindings/net/broadcom-bcmgenet.txt @@ -10,8 +10,8 @@ Required properties: - phy-mode: String, operation mode of the PHY interface. Supported values are "mii", "rgmii", "rgmii-txid", "rev-mii", "moca". Analogous to ePAPR "phy-connection-type" values -- address-cells: should be 1 -- size-cells: should be 1 +- #address-cells: should be 1 +- #size-cells: should be 1 Optional properties: - clocks: When provided, must be two phandles to the functional clocks nodes @@ -42,8 +42,8 @@ MDIO bus node required properties: parent node compatible property (e.g: brcm,genet-v4 pairs with brcm,genet-mdio-v4) - reg: address and length relative to the parent node base register address -- address-cells: address cell for MDIO bus addressing, should be 1 -- size-cells: size of the cells for MDIO bus addressing, should be 0 +- #address-cells: address cell for MDIO bus addressing, should be 1 +- #size-cells: size of the cells for MDIO bus addressing, should be 0 Ethernet PHY node properties: -- 1.8.3.2