Matt Taggart reported that mvsas didn't bind to the Marvell SAS controller on a Supermicro AOC-SAS2LP-MV8 board. lspci reports it as: 01:00.0 RAID bus controller [0104]: Marvell Technology Group Ltd. Device [1b4b:9485] (rev 03) Subsystem: Marvell Technology Group Ltd. Device [1b4b:9485] [...] Add it to the device table as chip_9485. Reported-by: Matt Taggart Tested-by: Matt Taggart Signed-off-by: Ben Hutchings --- drivers/scsi/mvsas/mv_init.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c index 7b7381d..83fa5f8 100644 --- a/drivers/scsi/mvsas/mv_init.c +++ b/drivers/scsi/mvsas/mv_init.c @@ -729,6 +729,15 @@ static struct pci_device_id mvs_pci_table[] = { .class_mask = 0, .driver_data = chip_9485, }, + { + .vendor = PCI_VENDOR_ID_MARVELL_EXT, + .device = 0x9485, + .subvendor = PCI_ANY_ID, + .subdevice = 0x9485, + .class = 0, + .class_mask = 0, + .driver_data = chip_9485, + }, { PCI_VDEVICE(OCZ, 0x1021), chip_9485}, /* OCZ RevoDrive3 */ { PCI_VDEVICE(OCZ, 0x1022), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */ { PCI_VDEVICE(OCZ, 0x1040), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */ -- Ben Hutchings One of the nice things about standards is that there are so many of them. -- Ben Hutchings Absolutum obsoletum. (If it works, it's out of date.) - Stafford Beer