From: Imre Deak <imre.deak@intel.com>
To: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: scsi_target_reap_usercontext causes a WARN
Date: Fri, 21 Feb 2014 16:19:57 +0200 [thread overview]
Message-ID: <1392992397.26076.16.camel@intelbox> (raw)
[-- Attachment #1: Type: text/plain, Size: 110027 bytes --]
Hi,
not sure if this is a know issue already, but with the 3.13 kernel I got
the warning below. There is also a jbd2_log_wait_commit() hang notice in
the log but I think it's unrelated.
I thought to drop a quick message about this, since it reminded me of
another bug with a similar backtrace. That one was a drm/i915 issue and
caused by an incorrect order of device unregistration for a parent and
its child device. The only allowed order is to first unregister any
child device and only afterwards the parent device. The opposite results
in a similar warning that I included here. For some more context see:
http://patchwork.freedesktop.org/patch/20023/
http://lists.freedesktop.org/archives/intel-gfx/2014-January/038782.html
http://lists.freedesktop.org/archives/intel-gfx/2014-February/039427.html
https://bugs.freedesktop.org/show_bug.cgi?id=70523
--Imre
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-imre+ (jim@intelbox) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu9) ) #327 SMP PREEMPT Wed Feb 12 15:26:44 EET 2014
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-imre+ root=UUID=e8239eb9-a546-4c3b-9c43-bcdb32a655f6 ro quiet splash vt.handoff=7
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000c6d50fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c6d51000-0x00000000c6da4fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c6da5000-0x00000000c6dc9fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c6dca000-0x00000000c6dcafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c6dcb000-0x00000000c6ddafff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c6ddb000-0x00000000c6de5fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c6de6000-0x00000000c6de8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c6de9000-0x00000000c6decfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c6ded000-0x00000000c6e3cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c6e3d000-0x00000000c6e7ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c6e80000-0x00000000c6ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c7800000-0x00000000cf9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000042fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: Dell Inc. XPS 8300 /0Y2MRG, BIOS A03 02/15/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x42fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask C00000000 write-back
[ 0.000000] 1 base 400000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C7800000 mask FFF800000 uncachable
[ 0.000000] 3 base 0C8000000 mask FF8000000 uncachable
[ 0.000000] 4 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 5 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 6 base 42FE00000 mask FFFE00000 uncachable
[ 0.000000] 7 base 430000000 mask FF0000000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 16GB, type WB
[ 0.000000] reg 1, base: 16GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3192MB, range: 8MB, type UC
[ 0.000000] reg 3, base: 3200MB, range: 128MB, type UC
[ 0.000000] reg 4, base: 3328MB, range: 256MB, type UC
[ 0.000000] reg 5, base: 3584MB, range: 512MB, type UC
[ 0.000000] reg 6, base: 17150MB, range: 2MB, type UC
[ 0.000000] reg 7, base: 17152MB, range: 256MB, type UC
[ 0.000000] total RAM covered: 16246M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 9 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 128MB, type WB
[ 0.000000] reg 3, base: 3192MB, range: 8MB, type UC
[ 0.000000] reg 4, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 5, base: 8GB, range: 8GB, type WB
[ 0.000000] reg 6, base: 16GB, range: 512MB, type WB
[ 0.000000] reg 7, base: 16896MB, range: 256MB, type WB
[ 0.000000] reg 8, base: 17150MB, range: 2MB, type UC
[ 0.000000] e820: update [mem 0xc7800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xc7000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fcbb0-0x000fcbbf] mapped at [ffff8800000fcbb0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] reserving inaccessible SNB gfx pages
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x02996000, 0x02996fff] PGTABLE
[ 0.000000] BRK [0x02997000, 0x02997fff] PGTABLE
[ 0.000000] BRK [0x02998000, 0x02998fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x42fc00000-0x42fdfffff]
[ 0.000000] [mem 0x42fc00000-0x42fdfffff] page 2M
[ 0.000000] BRK [0x02999000, 0x02999fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x42c000000-0x42fbfffff]
[ 0.000000] [mem 0x42c000000-0x42fbfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x400000000-0x42bffffff]
[ 0.000000] [mem 0x400000000-0x42bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x40200000-0xc6d50fff]
[ 0.000000] [mem 0x40200000-0xc6bfffff] page 2M
[ 0.000000] [mem 0xc6c00000-0xc6d50fff] page 4k
[ 0.000000] BRK [0x0299a000, 0x0299afff] PGTABLE
[ 0.000000] BRK [0x0299b000, 0x0299bfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xc6dca000-0xc6dcafff]
[ 0.000000] [mem 0xc6dca000-0xc6dcafff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xc6e80000-0xc6ffffff]
[ 0.000000] [mem 0xc6e80000-0xc6ffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[ 0.000000] [mem 0x100000000-0x3ffffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x3594a000-0x36c9cfff]
[ 0.000000] ACPI: RSDP 00000000000f0410 000024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000c6d9e070 00005C (v01 DELL FX09 20100118 AMI 00000097)
[ 0.000000] ACPI: FACP 00000000c6da43a0 0000F4 (v04 DELL FX09 20100118 AMI 00000097)
[ 0.000000] ACPI: DSDT 00000000c6d9e158 006242 (v02 DELL FX09 00000006 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000c6de9e80 000040
[ 0.000000] ACPI: APIC 00000000c6da4498 000092 (v03 DELL FX09 20100118 AMI 00000097)
[ 0.000000] ACPI: SSDT 00000000c6da4530 0001D6 (v01 AMICPU PROC 00000001 MSFT 03000001)
[ 0.000000] ACPI: MCFG 00000000c6da4708 00003C (v01 DELL FX09 20100118 MSFT 00000097)
[ 0.000000] ACPI: SLIC 00000000c6da4748 000176 (v01 DELL FX09 20100118 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000c6da48c0 000038 (v01 DELL FX09 20100118 AMI. 00000004)
[ 0.000000] ACPI: OSFR 00000000c6da48f8 000080 (v01 DELL FX09 07DB020F ASL 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea0010bfffff] PMD -> [ffff88041f600000-ffff88042f3fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x42fdfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
[ 0.000000] node 0: [mem 0x40200000-0xc6d50fff]
[ 0.000000] node 0: [mem 0xc6dca000-0xc6dcafff]
[ 0.000000] node 0: [mem 0xc6e80000-0xc6ffffff]
[ 0.000000] node 0: [mem 0x100000000-0x42fdfffff]
[ 0.000000] On node 0 totalpages: 4155502
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 156 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12652 pages used for memmap
[ 0.000000] DMA32 zone: 809682 pages, LIFO batch:31
[ 0.000000] Normal zone: 52216 pages used for memmap
[ 0.000000] Normal zone: 3341824 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc6d51000-0xc6da4fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc6da5000-0xc6dc9fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc6dcb000-0xc6ddafff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc6ddb000-0xc6de5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc6de6000-0xc6de8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc6de9000-0xc6decfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc6ded000-0xc6e3cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc6e3d000-0xc6e7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc7000000-0xc77fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc7800000-0xcf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfa00000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xcfa00000-0xfed1bfff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88042fa00000 s84096 r8192 d22400 u262144
[ 0.000000] pcpu-alloc: s84096 r8192 d22400 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4090414
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-imre+ root=UUID=e8239eb9-a546-4c3b-9c43-bcdb32a655f6 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Memory: 16223148K/16622008K available (6872K kernel code, 989K rwdata, 3008K rodata, 1296K init, 11588K bss, 398860K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] NR_IRQS:4352 nr_irqs:744 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 5855 kB
[ 0.000000] per task-struct memory footprint: 1920 bytes
[ 0.000000] allocated 66584576 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] kmemleak: Kernel memory leak detector disabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 3392.249 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.49 BogoMIPS (lpj=13568996)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.000085] Security Framework initialized
[ 0.000124] Mount-cache hash table entries: 256
[ 0.000726] Initializing cgroup subsys memory
[ 0.000738] Initializing cgroup subsys devices
[ 0.000752] Initializing cgroup subsys freezer
[ 0.000765] Initializing cgroup subsys blkio
[ 0.000767] Initializing cgroup subsys perf_event
[ 0.000804] CPU: Physical Processor ID: 0
[ 0.000805] CPU: Processor Core ID: 0
[ 0.000808] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.000808] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.000810] mce: CPU supports 9 MCE banks
[ 0.000819] CPU0: Thermal monitoring enabled (TM1)
[ 0.000831] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[ 0.000831] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.000831] tlb_flushall_shift: 5
[ 0.000965] Freeing SMP alternatives memory: 24K (ffffffff81e3d000 - ffffffff81e43000)
[ 0.000969] ACPI: Core revision 20131115
[ 0.005686] ACPI: All ACPI Tables successfully acquired
[ 0.005810] ftrace: allocating 24198 entries in 95 pages
[ 0.015286] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.054988] smpboot: CPU0: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz (fam: 06, model: 2a, stepping: 07)
[ 0.054995] TSC deadline timer enabled
[ 0.055007] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[ 0.055013] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
[ 0.055019] ... version: 3
[ 0.055020] ... bit width: 48
[ 0.055020] ... generic registers: 4
[ 0.055021] ... value mask: 0000ffffffffffff
[ 0.055022] ... max period: 0000ffffffffffff
[ 0.055023] ... fixed-purpose events: 3
[ 0.055024] ... event mask: 000000070000000f
[ 0.087288] x86: Booting SMP configuration:
[ 0.100621] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.087290] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.228246] x86: Booted up 1 node, 8 CPUs
[ 0.228250] smpboot: Total of 8 processors activated (54275.98 BogoMIPS)
[ 0.234536] devtmpfs: initialized
[ 0.234838] PM: Registering ACPI NVS region [mem 0xc6d51000-0xc6da4fff] (344064 bytes)
[ 0.234847] PM: Registering ACPI NVS region [mem 0xc6ddb000-0xc6de5fff] (45056 bytes)
[ 0.234848] PM: Registering ACPI NVS region [mem 0xc6de9000-0xc6decfff] (16384 bytes)
[ 0.234850] PM: Registering ACPI NVS region [mem 0xc6e3d000-0xc6e7ffff] (274432 bytes)
[ 0.235674] xor: automatically using best checksumming function:
[ 0.273940] avx : 23239.000 MB/sec
[ 0.273944] atomic64 test passed for x86-64 platform with CX8 and with SSE
[ 0.273972] RTC time: 13:19:19, date: 02/20/14
[ 0.274107] NET: Registered protocol family 16
[ 0.274387] cpuidle: using governor ladder
[ 0.274389] cpuidle: using governor menu
[ 0.274433] ACPI: bus type PCI registered
[ 0.274525] PCI: Using configuration type 1 for base access
[ 0.276176] bio: create slab <bio-0> at 0
[ 0.342015] raid6: sse2x1 9076 MB/s
[ 0.410080] raid6: sse2x2 11310 MB/s
[ 0.478153] raid6: sse2x4 13004 MB/s
[ 0.478154] raid6: using algorithm sse2x4 (13004 MB/s)
[ 0.478155] raid6: using ssse3x2 recovery algorithm
[ 0.478232] ACPI: Added _OSI(Module Device)
[ 0.478233] ACPI: Added _OSI(Processor Device)
[ 0.478235] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.478236] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.483280] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.487744] ACPI: SSDT 00000000c6de5898 0006F4 (v01 AMI IST 00000001 MSFT 03000001)
[ 0.488580] ACPI: Dynamic OEM Table Load:
[ 0.488583] ACPI: SSDT (null) 0006F4 (v01 AMI IST 00000001 MSFT 03000001)
[ 0.488625] ACPI: SSDT 00000000c6dded98 0000E4 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.489299] ACPI: Dynamic OEM Table Load:
[ 0.489301] ACPI: SSDT (null) 0000E4 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.490811] ACPI: Interpreter enabled
[ 0.490820] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.490847] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.490848] ACPI: Using IOAPIC for interrupt routing
[ 0.490884] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.491090] ACPI: No dock devices found.
[ 0.491782] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.501698] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.501703] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.501879] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 0.502254] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c8000-0x000dffff] (conflicts with Video ROM [mem 0x000c0000-0x000cd9ff])
[ 0.502458] PCI host bridge to bus 0000:00
[ 0.502461] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.502462] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.502464] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.502465] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.502467] pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xffffffff]
[ 0.502476] pci_bus 0000:00: scanning bus
[ 0.502499] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[ 0.502505] pci 0000:00:00.0: calling quirk_mmio_always_on+0x0/0x10
[ 0.502702] pci 0000:00:02.0: [8086:0102] type 00 class 0x030000
[ 0.502715] pci 0000:00:02.0: reg 0x10: [mem 0xfe000000-0xfe3fffff 64bit]
[ 0.502723] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.502728] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.502942] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.502970] pci 0000:00:16.0: reg 0x10: [mem 0xfe508000-0xfe50800f 64bit]
[ 0.503058] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.503083] pci 0000:00:16.0: PME# disabled
[ 0.503229] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.503255] pci 0000:00:1a.0: reg 0x10: [mem 0xfe507000-0xfe5073ff]
[ 0.503357] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.503362] pci 0000:00:1a.0: PME# disabled
[ 0.503466] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.503514] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.503533] pci 0000:00:1b.0: reg 0x10: [mem 0xfe500000-0xfe503fff 64bit]
[ 0.503621] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.503625] pci 0000:00:1b.0: PME# disabled
[ 0.503751] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.503798] pci 0000:00:1c.0: calling pci_fixup_transparent_bridge+0x0/0x20
[ 0.503848] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.503852] pci 0000:00:1c.0: PME# disabled
[ 0.503944] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.503993] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 0.504036] pci 0000:00:1c.3: calling pci_fixup_transparent_bridge+0x0/0x20
[ 0.504086] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.504091] pci 0000:00:1c.3: PME# disabled
[ 0.504182] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.504238] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.504262] pci 0000:00:1d.0: reg 0x10: [mem 0xfe506000-0xfe5063ff]
[ 0.504365] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.504370] pci 0000:00:1d.0: PME# disabled
[ 0.504461] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.504508] pci 0000:00:1f.0: [8086:1c4a] type 00 class 0x060100
[ 0.504753] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[ 0.504779] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.504789] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.504799] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.504809] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.504818] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.504828] pci 0000:00:1f.2: reg 0x24: [mem 0xfe505000-0xfe5057ff]
[ 0.504882] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.504886] pci 0000:00:1f.2: PME# disabled
[ 0.505007] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.505026] pci 0000:00:1f.3: reg 0x10: [mem 0xfe504000-0xfe5040ff 64bit]
[ 0.505052] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.505184] pci_bus 0000:00: fixups for bus
[ 0.505188] pci 0000:00:1c.0: scanning [bus 01-01] behind bridge, pass 0
[ 0.505253] pci_bus 0000:01: scanning bus
[ 0.505257] pci_bus 0000:01: fixups for bus
[ 0.505258] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.505270] pci_bus 0000:01: bus scan returning with max=01
[ 0.505276] pci 0000:00:1c.3: scanning [bus 02-02] behind bridge, pass 0
[ 0.505339] pci_bus 0000:02: scanning bus
[ 0.505372] pci 0000:02:00.0: [14e4:1691] type 00 class 0x020000
[ 0.505401] pci 0000:02:00.0: reg 0x10: [mem 0xfe400000-0xfe40ffff 64bit]
[ 0.505568] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.505574] pci 0000:02:00.0: PME# disabled
[ 0.510313] pci_bus 0000:02: fixups for bus
[ 0.510315] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.510321] pci 0000:00:1c.3: bridge window [mem 0xfe400000-0xfe4fffff]
[ 0.510329] pci_bus 0000:02: bus scan returning with max=02
[ 0.510334] pci 0000:00:1c.0: scanning [bus 01-01] behind bridge, pass 1
[ 0.510341] pci 0000:00:1c.3: scanning [bus 02-02] behind bridge, pass 1
[ 0.510346] pci_bus 0000:00: bus scan returning with max=02
[ 0.510358] pci_bus 0000:00: on NUMA node 0
[ 0.511543] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.511636] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.511727] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.511818] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.511908] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.511999] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.512090] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.512180] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.512390] ACPI: Enabled 3 GPEs in block 00 to 3F
[ 0.512398] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.512487] Found 1 acpi root devices
[ 0.512741] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.512745] vgaarb: loaded
[ 0.512746] vgaarb: bridge control possible 0000:00:02.0
[ 0.512818] SCSI subsystem initialized
[ 0.512840] libata version 3.00 loaded.
[ 0.512864] ACPI: bus type USB registered
[ 0.512883] usbcore: registered new interface driver usbfs
[ 0.512894] usbcore: registered new interface driver hub
[ 0.512920] usbcore: registered new device driver usb
[ 0.512942] pps_core: LinuxPPS API ver. 1 registered
[ 0.512943] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.512947] PTP clock support registered
[ 0.513023] PCI: Using ACPI for IRQ routing
[ 0.513025] PCI: pci_cache_line_size set to 64 bytes
[ 0.513030] pci 0000:00:02.0: BAR 0: reserving [mem 0xfe000000-0xfe3fffff flags 0x140204] (d=0, p=0)
[ 0.513033] pci 0000:00:02.0: BAR 2: reserving [mem 0xd0000000-0xdfffffff flags 0x14220c] (d=0, p=0)
[ 0.513035] pci 0000:00:02.0: BAR 4: reserving [io 0xf000-0xf03f flags 0x40101] (d=0, p=0)
[ 0.513039] pci 0000:00:16.0: BAR 0: reserving [mem 0xfe508000-0xfe50800f flags 0x140204] (d=0, p=0)
[ 0.513042] pci 0000:00:1a.0: BAR 0: reserving [mem 0xfe507000-0xfe5073ff flags 0x40200] (d=0, p=0)
[ 0.513046] pci 0000:00:1b.0: BAR 0: reserving [mem 0xfe500000-0xfe503fff flags 0x140204] (d=0, p=0)
[ 0.513054] pci 0000:02:00.0: BAR 0: reserving [mem 0xfe400000-0xfe40ffff flags 0x140204] (d=0, p=0)
[ 0.513057] pci 0000:00:1d.0: BAR 0: reserving [mem 0xfe506000-0xfe5063ff flags 0x40200] (d=0, p=0)
[ 0.513063] pci 0000:00:1f.2: BAR 0: reserving [io 0xf0b0-0xf0b7 flags 0x40101] (d=0, p=0)
[ 0.513065] pci 0000:00:1f.2: BAR 1: reserving [io 0xf0a0-0xf0a3 flags 0x40101] (d=0, p=0)
[ 0.513067] pci 0000:00:1f.2: BAR 2: reserving [io 0xf090-0xf097 flags 0x40101] (d=0, p=0)
[ 0.513069] pci 0000:00:1f.2: BAR 3: reserving [io 0xf080-0xf083 flags 0x40101] (d=0, p=0)
[ 0.513070] pci 0000:00:1f.2: BAR 4: reserving [io 0xf060-0xf07f flags 0x40101] (d=0, p=0)
[ 0.513072] pci 0000:00:1f.2: BAR 5: reserving [mem 0xfe505000-0xfe5057ff flags 0x40200] (d=0, p=0)
[ 0.513076] pci 0000:00:1f.3: BAR 0: reserving [mem 0xfe504000-0xfe5040ff flags 0x140204] (d=0, p=0)
[ 0.513078] pci 0000:00:1f.3: BAR 4: reserving [io 0xf040-0xf05f flags 0x40101] (d=0, p=0)
[ 0.513099] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.513104] e820: reserve RAM buffer [mem 0xc6d51000-0xc7ffffff]
[ 0.513106] e820: reserve RAM buffer [mem 0xc6dcb000-0xc7ffffff]
[ 0.513108] e820: reserve RAM buffer [mem 0xc7000000-0xc7ffffff]
[ 0.513109] e820: reserve RAM buffer [mem 0x42fe00000-0x42fffffff]
[ 0.513361] NetLabel: Initializing
[ 0.513362] NetLabel: domain hash size = 128
[ 0.513363] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.513393] NetLabel: unlabeled traffic allowed by default
[ 0.513421] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.513427] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.515477] Switched to clocksource hpet
[ 0.530476] pnp: PnP ACPI init
[ 0.530502] ACPI: bus type PNP registered
[ 0.530706] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
[ 0.530709] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.530710] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.530714] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.530716] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.530764] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.530952] system 00:01: [io 0x0a00-0x0a1f] has been reserved
[ 0.530954] system 00:01: [io 0x0a30-0x0a3f] has been reserved
[ 0.530958] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.531197] pnp 00:02: [dma 4]
[ 0.531223] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.531265] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.531297] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.531349] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.531353] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.531388] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.531673] system 00:07: [io 0x0400-0x0453] could not be reserved
[ 0.531675] system 00:07: [io 0x0458-0x047f] has been reserved
[ 0.531677] system 00:07: [io 0x1180-0x119f] has been reserved
[ 0.531679] system 00:07: [io 0x0500-0x057f] has been reserved
[ 0.531681] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.531683] system 00:07: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.531685] system 00:07: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.531687] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[ 0.531691] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.531775] system 00:08: [io 0x0454-0x0457] has been reserved
[ 0.531778] system 00:08: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.531988] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.532191] pnp: PnP ACPI: found 10 devices
[ 0.532193] ACPI: bus type PNP unregistered
[ 0.539320] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.539335] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.539341] pci 0000:00:1c.3: bridge window [mem 0xfe400000-0xfe4fffff]
[ 0.539351] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.539352] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.539354] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.539355] pci_bus 0000:00: resource 7 [mem 0xcfa00000-0xffffffff]
[ 0.539357] pci_bus 0000:02: resource 1 [mem 0xfe400000-0xfe4fffff]
[ 0.539401] NET: Registered protocol family 2
[ 0.539747] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.539905] TCP bind hash table entries: 65536 (order: 10, 4194304 bytes)
[ 0.542569] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.542605] TCP: reno registered
[ 0.542639] UDP hash table entries: 8192 (order: 8, 1310720 bytes)
[ 0.543350] UDP-Lite hash table entries: 8192 (order: 8, 1310720 bytes)
[ 0.544204] NET: Registered protocol family 1
[ 0.544222] pci 0000:00:02.0: calling disable_igfx_irq+0x0/0x80
[ 0.544646] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
[ 0.544658] pci 0000:00:02.0: calling pci_fixup_video+0x0/0xe0
[ 0.544660] pci 0000:00:02.0: Boot video device
[ 0.544668] pci 0000:00:1a.0: calling quirk_usb_early_handoff+0x0/0x7e0
[ 0.615702] pci 0000:00:1d.0: calling quirk_usb_early_handoff+0x0/0x7e0
[ 0.687732] PCI: CLS 64 bytes, default 64
[ 0.687870] Unpacking initramfs...
[ 0.945928] Freeing initrd memory: 19788K (ffff88003594a000 - ffff880036c9d000)
[ 0.952001] DMA-API: preallocated 65536 debug entries
[ 0.952003] DMA-API: debugging enabled by kernel config
[ 0.952005] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.952007] software IO TLB [mem 0xc2d51000-0xc6d51000] (64MB) mapped at [ffff8800c2d51000-ffff8800c6d50fff]
[ 0.953107] Scanning for low memory corruption every 60 seconds
[ 0.953300] cryptomgr_test (57) used greatest stack depth: 6224 bytes left
[ 0.954953] modprobe (65) used greatest stack depth: 5760 bytes left
[ 0.956064] cryptomgr_test (62) used greatest stack depth: 5544 bytes left
[ 0.956182] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 0.956725] audit: initializing netlink socket (disabled)
[ 0.956753] type=2000 audit(1392902359.948:1): initialized
[ 0.973957] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.975897] VFS: Disk quotas dquot_6.5.2
[ 0.975942] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.976645] msgmni has been set to 31724
[ 0.977233] alg: No test for stdrng (krng)
[ 0.977241] NET: Registered protocol family 38
[ 0.977255] async_tx: api initialized (async)
[ 0.977293] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.977369] io scheduler noop registered
[ 0.977370] io scheduler deadline registered
[ 0.977432] io scheduler cfq registered (default)
[ 0.978262] list_sort_test: start testing list_sort()
[ 0.979043] intel_idle: MWAIT substates: 0x1120
[ 0.979044] intel_idle: v0.4 model 0x2A
[ 0.979046] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.979435] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.979469] ACPI: Power Button [PWRB]
[ 0.979514] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.979517] ACPI: Power Button [PWRF]
[ 0.980954] GHES: HEST is not enabled!
[ 0.980956] ERST DBG: ERST support is disabled.
[ 0.981035] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.981751] Non-volatile memory driver v1.3
[ 0.981753] Linux agpgart interface v0.103
[ 0.982941] loop: module loaded
[ 0.983138] mei_me 0000:00:16.0: irq 40 for MSI/MSI-X
[ 0.989408] SCSI Media Changer driver v0.25
[ 0.989432] ahci 0000:00:1f.2: version 3.0
[ 0.989582] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 1.003746] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1f impl SATA mode
[ 1.003749] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst
[ 1.036602] scsi0 : ahci
[ 1.036855] scsi1 : ahci
[ 1.037005] scsi2 : ahci
[ 1.037156] scsi3 : ahci
[ 1.037310] scsi4 : ahci
[ 1.037435] scsi5 : ahci
[ 1.037490] ata1: SATA max UDMA/133 abar m2048@0xfe505000 port 0xfe505100 irq 41
[ 1.037492] ata2: SATA max UDMA/133 abar m2048@0xfe505000 port 0xfe505180 irq 41
[ 1.037494] ata3: SATA max UDMA/133 abar m2048@0xfe505000 port 0xfe505200 irq 41
[ 1.037497] ata4: SATA max UDMA/133 abar m2048@0xfe505000 port 0xfe505280 irq 41
[ 1.037499] ata5: SATA max UDMA/133 abar m2048@0xfe505000 port 0xfe505300 irq 41
[ 1.037500] ata6: DUMMY
[ 1.037694] libphy: Fixed MDIO Bus: probed
[ 1.037709] tg3.c:v3.134 (Sep 16, 2013)
[ 1.053735] libphy: tg3 mdio bus: probed
[ 1.063280] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM57788) rev 57780001] (PCI Express) MAC address 78:2b:cb:9a:34:46
[ 1.063282] tg3 0000:02:00.0 eth0: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=200:01)
[ 1.063284] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 1.063286] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 1.063364] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 1.063365] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 1.063380] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.063381] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.063401] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.063408] ehci-pci: EHCI PCI platform driver
[ 1.063555] ehci-pci 0000:00:1a.0: enabling bus mastering
[ 1.063587] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.063659] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.063688] ehci-pci 0000:00:1a.0: debug port 2
[ 1.067670] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.067703] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfe507000
[ 1.075815] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.076024] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.076027] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.076028] usb usb1: Product: EHCI Host Controller
[ 1.076030] usb usb1: Manufacturer: Linux 3.13.0-imre+ ehci_hcd
[ 1.076031] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.076480] hub 1-0:1.0: USB hub found
[ 1.076520] hub 1-0:1.0: 2 ports detected
[ 1.077057] ehci-pci 0000:00:1d.0: enabling bus mastering
[ 1.077069] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.077076] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.077092] ehci-pci 0000:00:1d.0: debug port 2
[ 1.081013] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.081033] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfe506000
[ 1.091788] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.091898] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.091900] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.091901] usb usb2: Product: EHCI Host Controller
[ 1.091903] usb usb2: Manufacturer: Linux 3.13.0-imre+ ehci_hcd
[ 1.091904] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.092145] hub 2-0:1.0: USB hub found
[ 1.092155] hub 2-0:1.0: 2 ports detected
[ 1.092325] ehci-platform: EHCI generic platform driver
[ 1.092334] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.092459] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.092910] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.093065] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.093259] mousedev: PS/2 mouse device common for all mice
[ 1.093902] rtc_cmos 00:03: RTC can wake from S4
[ 1.094198] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.094234] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.094718] md: linear personality registered for level -1
[ 1.094720] md: raid0 personality registered for level 0
[ 1.094721] md: raid1 personality registered for level 1
[ 1.094722] md: raid10 personality registered for level 10
[ 1.094861] md: raid6 personality registered for level 6
[ 1.094864] md: raid5 personality registered for level 5
[ 1.094865] md: raid4 personality registered for level 4
[ 1.094866] md: multipath personality registered for level -4
[ 1.094868] md: faulty personality registered for level -5
[ 1.094936] device-mapper: uevent: version 1.0.3
[ 1.095122] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 1.095303] device-mapper: dm-log-userspace: version 1.1.0 loaded
[ 1.095306] device-mapper: raid: Loading target version 1.5.2
[ 1.095605] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.095732] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.096356] TCP: cubic registered
[ 1.096359] Initializing XFRM netlink socket
[ 1.096500] NET: Registered protocol family 10
[ 1.096908] mip6: Mobile IPv6
[ 1.096920] NET: Registered protocol family 17
[ 1.097345] registered taskstats version 1
[ 1.099762] Key type encrypted registered
[ 1.102624] Magic number: 2:128:332
[ 1.102637] tty tty53: hash matches
[ 1.102812] console [netcon0] enabled
[ 1.102813] netconsole: network logging started
[ 1.102898] rtc_cmos 00:03: setting system clock to 2014-02-20 13:19:20 UTC (1392902360)
[ 1.105078] PM: Hibernation image not present or could not be loaded.
[ 1.355921] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.356004] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.356082] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.356166] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.357465] ata3.00: ATA-8: WDC WD10EALX-759BA1, 17.01H17, max UDMA/133
[ 1.357471] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.358876] ata3.00: configured for UDMA/133
[ 1.363923] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.366400] ata2.00: ATAPI: PLDS DVD+/-RW DH-16ABS, PD11, max UDMA/100
[ 1.367096] ata1.00: ATA-9: INTEL SSDSC2CT120A3, 300i, max UDMA/133
[ 1.367102] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.367266] ata2.00: configured for UDMA/100
[ 1.376970] ata1.00: configured for UDMA/133
[ 1.377920] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2CT12 300i PQ: 0 ANSI: 5
[ 1.378881] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 1.379105] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.379549] sd 0:0:0:0: [sda] Write Protect is off
[ 1.379556] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.379724] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.382308] sda: sda1 sda2 < sda5 >
[ 1.383100] scsi 1:0:0:0: CD-ROM PLDS DVD+-RW DH-16ABS PD11 PQ: 0 ANSI: 5
[ 1.383861] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.387018] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.387024] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.387550] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.387793] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.387990] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.388290] scsi 2:0:0:0: Direct-Access ATA WDC WD10EALX-759 17.0 PQ: 0 ANSI: 5
[ 1.388688] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.388741] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.389044] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.389051] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.389220] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.520639] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.520645] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.521215] hub 1-1:1.0: USB hub found
[ 1.521379] hub 1-1:1.0: 6 ports detected
[ 1.632142] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.764716] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.764719] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.765184] hub 2-1:1.0: USB hub found
[ 1.765361] hub 2-1:1.0: 8 ports detected
[ 1.836402] usb 1-1.3: new low-speed USB device number 3 using ehci-pci
[ 1.890872] sdb: sdb1 sdb2 < sdb5 > sdb3
[ 1.892506] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.894190] Freeing unused kernel memory: 1296K (ffffffff81cf9000 - ffffffff81e3d000)
[ 1.894194] Write protecting the kernel read-only data: 12288k
[ 1.899057] Freeing unused kernel memory: 1312K (ffff8800016b8000 - ffff880001800000)
[ 1.902373] Freeing unused kernel memory: 1088K (ffff880001af0000 - ffff880001c00000)
[ 1.911241] busybox (141) used greatest stack depth: 5480 bytes left
[ 1.932285] systemd-udevd[157]: starting version 204
[ 1.935558] usb 1-1.3: New USB device found, idVendor=046d, idProduct=c52a
[ 1.935564] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.935567] usb 1-1.3: Product: 2.4GHz Cordless Desktop
[ 1.935570] usb 1-1.3: Manufacturer: Logitech
[ 1.946779] input: Logitech 2.4GHz Cordless Desktop as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input5
[ 1.948010] hid-generic 0003:046D:C52A.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech 2.4GHz Cordless Desktop] on usb-0000:00:1a.0-1.3/input0
[ 1.952206] tsc: Refined TSC clocksource calibration: 3392.295 MHz
[ 1.956239] input: Logitech 2.4GHz Cordless Desktop as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.1/input/input6
[ 1.956558] hid-generic 0003:046D:C52A.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech 2.4GHz Cordless Desktop] on usb-0000:00:1a.0-1.3/input1
[ 1.956587] usbcore: registered new interface driver usbhid
[ 1.956588] usbhid: USB HID core driver
[ 1.985726] ata_id (180) used greatest stack depth: 3960 bytes left
[ 2.036377] usb 2-1.1: new full-speed USB device number 3 using ehci-pci
[ 2.132857] usb 2-1.1: New USB device found, idVendor=2341, idProduct=0043
[ 2.132860] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=220
[ 2.132861] usb 2-1.1: Manufacturer: Arduino (www.arduino.cc)
[ 2.132863] usb 2-1.1: SerialNumber: 74133353537351E0A042
[ 2.204487] usb 2-1.2: new high-speed USB device number 4 using ehci-pci
[ 2.296963] usb 2-1.2: New USB device found, idVendor=0409, idProduct=005a
[ 2.296969] usb 2-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.297421] hub 2-1.2:1.0: USB hub found
[ 2.297613] hub 2-1.2:1.0: 4 ports detected
[ 2.368553] usb 2-1.4: new full-speed USB device number 5 using ehci-pci
[ 2.463306] usb 2-1.4: New USB device found, idVendor=0403, idProduct=6010
[ 2.463312] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.463315] usb 2-1.4: Product: Dual RS232
[ 2.463318] usb 2-1.4: Manufacturer: FTDI
[ 2.536576] usb 2-1.8: new high-speed USB device number 6 using ehci-pci
[ 2.631393] usb 2-1.8: New USB device found, idVendor=18e3, idProduct=9106
[ 2.631400] usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.631403] usb 2-1.8: Product: Mass Storage Device
[ 2.631406] usb 2-1.8: Manufacturer: Generic
[ 2.631409] usb 2-1.8: SerialNumber: 18E391066476
[ 2.639078] usb-storage 2-1.8:1.0: USB Mass Storage device detected
[ 2.639354] scsi6 : usb-storage 2-1.8:1.0
[ 2.639526] usbcore: registered new interface driver usb-storage
[ 2.953053] Switched to clocksource tsc
[ 3.638808] scsi 6:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0
[ 3.639499] scsi 6:0:0:1: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0
[ 3.640249] scsi 6:0:0:2: Direct-Access Generic- SM/xD-Picture 1.02 PQ: 0 ANSI: 0
[ 3.640953] scsi 6:0:0:3: Direct-Access Generic- MS/MS-Pro 1.03 PQ: 0 ANSI: 0 CCS
[ 3.642352] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 3.643578] sd 6:0:0:1: Attached scsi generic sg4 type 0
[ 3.645326] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 3.646005] sd 6:0:0:2: Attached scsi generic sg5 type 0
[ 3.649111] sd 6:0:0:1: [sdd] Attached SCSI removable disk
[ 3.649486] sd 6:0:0:3: Attached scsi generic sg6 type 0
[ 3.652440] sd 6:0:0:2: [sde] Attached SCSI removable disk
[ 3.653185] sd 6:0:0:3: [sdf] Attached SCSI removable disk
[ 7.026069] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 7.026075] EXT4-fs (sda1): write access will be enabled during recovery
[ 7.075807] EXT4-fs (sda1): orphan cleanup on readonly fs
[ 7.076147] EXT4-fs (sda1): 1 orphan inode deleted
[ 7.076149] EXT4-fs (sda1): recovery complete
[ 7.078868] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 7.175909] random: init urandom read with 105 bits of entropy available
[ 7.251242] init: ureadahead main process (225) terminated with status 5
[ 7.423764] systemd-udevd[359]: starting version 204
[ 7.509805] [drm] Initialized drm 1.1.0 20060810
[ 7.510300] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \LBAE 1 (20131115/utaddress-251)
[ 7.510305] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.510306] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \LBAE 1 (20131115/utaddress-251)
[ 7.510309] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.510310] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \LBAE 1 (20131115/utaddress-251)
[ 7.510313] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.510314] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 7.546425] random: nonblocking pool is initialized
[ 7.600954] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x14
[ 7.601085] [drm] Memory usable by graphics device = 2048M
[ 7.602335] platform microcode: Direct firmware load failed with error -2
[ 7.602339] platform microcode: Falling back to user helper
[ 7.614199] cdc_acm 2-1.1:1.0: ttyACM0: USB ACM device
[ 7.615849] usbcore: registered new interface driver cdc_acm
[ 7.615851] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 7.621887] modprobe (431) used greatest stack depth: 3688 bytes left
[ 7.622554] usbcore: registered new interface driver usbserial
[ 7.625892] usbcore: registered new interface driver ftdi_sio
[ 7.626054] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 7.626116] ftdi_sio 2-1.4:1.0: FTDI USB Serial Device converter detected
[ 7.626507] usb 2-1.4: Detected FT2232C
[ 7.626510] usb 2-1.4: Number of endpoints 2
[ 7.626513] usb 2-1.4: Endpoint 1 MaxPacketSize 64
[ 7.626515] usb 2-1.4: Endpoint 2 MaxPacketSize 64
[ 7.626518] usb 2-1.4: Setting MaxPacketSize 64
[ 7.627308] usb 2-1.4: FTDI USB Serial Device converter now attached to ttyUSB0
[ 7.627396] ftdi_sio 2-1.4:1.1: FTDI USB Serial Device converter detected
[ 7.627446] usb 2-1.4: Detected FT2232C
[ 7.627448] usb 2-1.4: Number of endpoints 2
[ 7.627451] usb 2-1.4: Endpoint 1 MaxPacketSize 64
[ 7.627453] usb 2-1.4: Endpoint 2 MaxPacketSize 64
[ 7.627456] usb 2-1.4: Setting MaxPacketSize 64
[ 7.629903] usb 2-1.4: FTDI USB Serial Device converter now attached to ttyUSB1
[ 7.654946] i915 0000:00:02.0: irq 42 for MSI/MSI-X
[ 7.654961] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 7.654962] [drm] Driver supports precise vblank timestamp query.
[ 7.655419] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 7.671211] [drm] Wrong MCH_SSKPD value: 0x16040307
[ 7.671214] [drm] This can cause pipe underruns and display issues.
[ 7.671215] [drm] Please upgrade your BIOS to fix this.
[ 7.743984] fbcon: inteldrmfb (fb0) is primary device
[ 7.754136] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,discard
[ 7.767623] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x14
[ 7.767651] platform microcode: Direct firmware load failed with error -2
[ 7.767652] platform microcode: Falling back to user helper
[ 7.775842] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x14
[ 7.775860] platform microcode: Direct firmware load failed with error -2
[ 7.775861] platform microcode: Falling back to user helper
[ 7.776833] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x14
[ 7.776851] platform microcode: Direct firmware load failed with error -2
[ 7.776852] platform microcode: Falling back to user helper
[ 7.777751] microcode: CPU4 sig=0x206a7, pf=0x2, revision=0x14
[ 7.777765] platform microcode: Direct firmware load failed with error -2
[ 7.777766] platform microcode: Falling back to user helper
[ 7.778631] microcode: CPU5 sig=0x206a7, pf=0x2, revision=0x14
[ 7.778650] platform microcode: Direct firmware load failed with error -2
[ 7.778651] platform microcode: Falling back to user helper
[ 7.780350] microcode: CPU6 sig=0x206a7, pf=0x2, revision=0x14
[ 7.780369] platform microcode: Direct firmware load failed with error -2
[ 7.780371] platform microcode: Falling back to user helper
[ 7.781279] microcode: CPU7 sig=0x206a7, pf=0x2, revision=0x14
[ 7.781298] platform microcode: Direct firmware load failed with error -2
[ 7.781299] platform microcode: Falling back to user helper
[ 7.782124] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 7.943373] Console: switching to colour frame buffer device 240x75
[ 7.951638] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 7.951640] i915 0000:00:02.0: registered panic notifier
[ 7.951755] i915: No ACPI video bus found
[ 7.951999] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 7.952698] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 7.971173] ALSA sound/pci/hda/patch_realtek.c:419 SKU: Nid=0x1d sku_cfg=0x4005e601
[ 7.971177] ALSA sound/pci/hda/patch_realtek.c:421 SKU: port_connectivity=0x1
[ 7.971179] ALSA sound/pci/hda/patch_realtek.c:422 SKU: enable_pcbeep=0x0
[ 7.971180] ALSA sound/pci/hda/patch_realtek.c:423 SKU: check_sum=0x00000005
[ 7.971182] ALSA sound/pci/hda/patch_realtek.c:424 SKU: customization=0x000000e6
[ 7.971183] ALSA sound/pci/hda/patch_realtek.c:425 SKU: external_amp=0x0
[ 7.971185] ALSA sound/pci/hda/patch_realtek.c:426 SKU: platform_type=0x0
[ 7.971186] ALSA sound/pci/hda/patch_realtek.c:427 SKU: swap=0x0
[ 7.971187] ALSA sound/pci/hda/patch_realtek.c:428 SKU: override=0x1
[ 7.971635] ALSA sound/pci/hda/hda_auto_parser.c:393 autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 7.971637] ALSA sound/pci/hda/hda_auto_parser.c:397 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 7.971639] ALSA sound/pci/hda/hda_auto_parser.c:401 hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 7.971640] ALSA sound/pci/hda/hda_auto_parser.c:402 mono: mono_out=0x0
[ 7.971642] ALSA sound/pci/hda/hda_auto_parser.c:405 dig-out=0x1e/0x0
[ 7.971643] ALSA sound/pci/hda/hda_auto_parser.c:406 inputs:
[ 7.971647] ALSA sound/pci/hda/hda_auto_parser.c:410 Front Mic=0x19
[ 7.971649] ALSA sound/pci/hda/hda_auto_parser.c:410 Rear Mic=0x18
[ 7.971651] ALSA sound/pci/hda/hda_auto_parser.c:410 Line=0x1a
[ 7.971654] ALSA sound/pci/hda/patch_realtek.c:491 realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
[ 7.971655] ALSA sound/pci/hda/patch_realtek.c:507 realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0887
[ 7.995862] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 7.996089] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 7.996193] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 7.996305] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 7.996406] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 7.996528] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 7.996612] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 7.996729] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 7.996842] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 8.142706] init: failsafe main process (702) killed by TERM signal
[ 8.232999] Bluetooth: Core ver 2.17
[ 8.233029] NET: Registered protocol family 31
[ 8.233031] Bluetooth: HCI device and connection manager initialized
[ 8.233089] Bluetooth: HCI socket layer initialized
[ 8.233095] Bluetooth: L2CAP socket layer initialized
[ 8.233106] Bluetooth: SCO socket layer initialized
[ 8.246354] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 8.246358] Bluetooth: BNEP filters: protocol multicast
[ 8.246371] Bluetooth: BNEP socket layer initialized
[ 8.248104] Bluetooth: RFCOMM TTY layer initialized
[ 8.248149] Bluetooth: RFCOMM socket layer initialized
[ 8.248158] Bluetooth: RFCOMM ver 1.11
[ 8.262048] init: avahi-cups-reload main process (828) terminated with status 1
[ 8.329501] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
[ 8.356441] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8.815549] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 8.942634] fuse init (API version 7.22)
[ 9.064549] tg3 0000:02:00.0 eth0: Link is down
[ 11.835954] init: plymouth-stop pre-start process (1591) terminated with status 1
[ 12.065901] tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
[ 12.065908] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
[ 12.066008] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1499.305308] DMA-API: debugging out of memory - disabling
[ 2154.841990] kworker/u16:3 (103) used greatest stack depth: 3528 bytes left
[ 3503.973325] usb 1-1.3: USB disconnect, device number 3
[ 3589.529938] usb 2-1.4: USB disconnect, device number 5
[ 3589.530782] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[ 3589.530887] ftdi_sio 2-1.4:1.0: device disconnected
[ 3589.531375] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
[ 3589.531411] ftdi_sio 2-1.4:1.1: device disconnected
[ 3590.751525] usb 2-1.4: new full-speed USB device number 7 using ehci-pci
[ 3590.846444] usb 2-1.4: New USB device found, idVendor=0403, idProduct=6010
[ 3590.846451] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3590.846454] usb 2-1.4: Product: Dual RS232
[ 3590.846457] usb 2-1.4: Manufacturer: FTDI
[ 3590.847226] ftdi_sio 2-1.4:1.0: FTDI USB Serial Device converter detected
[ 3590.847329] usb 2-1.4: Detected FT2232C
[ 3590.847333] usb 2-1.4: Number of endpoints 2
[ 3590.847336] usb 2-1.4: Endpoint 1 MaxPacketSize 64
[ 3590.847339] usb 2-1.4: Endpoint 2 MaxPacketSize 64
[ 3590.847342] usb 2-1.4: Setting MaxPacketSize 64
[ 3590.847882] usb 2-1.4: FTDI USB Serial Device converter now attached to ttyUSB0
[ 3590.848438] ftdi_sio 2-1.4:1.1: FTDI USB Serial Device converter detected
[ 3590.848498] usb 2-1.4: Detected FT2232C
[ 3590.848501] usb 2-1.4: Number of endpoints 2
[ 3590.848504] usb 2-1.4: Endpoint 1 MaxPacketSize 64
[ 3590.848507] usb 2-1.4: Endpoint 2 MaxPacketSize 64
[ 3590.848510] usb 2-1.4: Setting MaxPacketSize 64
[ 3590.848869] usb 2-1.4: FTDI USB Serial Device converter now attached to ttyUSB1
[ 3591.835002] usb 2-1.4: USB disconnect, device number 7
[ 3591.835620] ftdi_sio ttyUSB0: error from flowcontrol urb
[ 3591.836113] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[ 3591.836145] ftdi_sio 2-1.4:1.0: device disconnected
[ 3591.836501] ftdi_sio ttyUSB1: error from flowcontrol urb
[ 3591.836723] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
[ 3591.836743] ftdi_sio 2-1.4:1.1: device disconnected
[ 3601.508417] usb 2-1.4: new full-speed USB device number 8 using ehci-pci
[ 3601.602682] usb 2-1.4: New USB device found, idVendor=0403, idProduct=6010
[ 3601.602689] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3601.602693] usb 2-1.4: Product: Dual RS232
[ 3601.602696] usb 2-1.4: Manufacturer: FTDI
[ 3601.603329] ftdi_sio 2-1.4:1.0: FTDI USB Serial Device converter detected
[ 3601.603392] usb 2-1.4: Detected FT2232C
[ 3601.603396] usb 2-1.4: Number of endpoints 2
[ 3601.603399] usb 2-1.4: Endpoint 1 MaxPacketSize 64
[ 3601.603402] usb 2-1.4: Endpoint 2 MaxPacketSize 64
[ 3601.603405] usb 2-1.4: Setting MaxPacketSize 64
[ 3601.603838] usb 2-1.4: FTDI USB Serial Device converter now attached to ttyUSB0
[ 3601.604389] ftdi_sio 2-1.4:1.1: FTDI USB Serial Device converter detected
[ 3601.604721] usb 2-1.4: Detected FT2232C
[ 3601.604725] usb 2-1.4: Number of endpoints 2
[ 3601.604728] usb 2-1.4: Endpoint 1 MaxPacketSize 64
[ 3601.604731] usb 2-1.4: Endpoint 2 MaxPacketSize 64
[ 3601.604734] usb 2-1.4: Setting MaxPacketSize 64
[ 3601.605206] usb 2-1.4: FTDI USB Serial Device converter now attached to ttyUSB1
[ 3621.717849] usb 1-1.3: new low-speed USB device number 4 using ehci-pci
[ 3621.817140] usb 1-1.3: New USB device found, idVendor=046d, idProduct=c52a
[ 3621.817147] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3621.817151] usb 1-1.3: Product: 2.4GHz Cordless Desktop
[ 3621.817154] usb 1-1.3: Manufacturer: Logitech
[ 3621.822948] input: Logitech 2.4GHz Cordless Desktop as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input16
[ 3621.823772] hid-generic 0003:046D:C52A.0003: input,hidraw0: USB HID v1.11 Keyboard [Logitech 2.4GHz Cordless Desktop] on usb-0000:00:1a.0-1.3/input0
[ 3621.832232] input: Logitech 2.4GHz Cordless Desktop as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.1/input/input17
[ 3621.832792] hid-generic 0003:046D:C52A.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech 2.4GHz Cordless Desktop] on usb-0000:00:1a.0-1.3/input1
[ 8055.381009] ftdi_sio ttyUSB0: failed to get modem status: -32
[ 8055.431749] usb 2-1.4: USB disconnect, device number 8
[ 8055.432012] ftdi_sio ttyUSB0: error from flowcontrol urb
[ 8055.432342] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[ 8055.432379] ftdi_sio 2-1.4:1.0: device disconnected
[ 8055.432857] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
[ 8055.432893] ftdi_sio 2-1.4:1.1: device disconnected
[ 8071.125275] usb 2-1.4: new full-speed USB device number 9 using ehci-pci
[ 8071.220081] usb 2-1.4: New USB device found, idVendor=0403, idProduct=6010
[ 8071.220088] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 8071.220091] usb 2-1.4: Product: Dual RS232
[ 8071.220094] usb 2-1.4: Manufacturer: FTDI
[ 8071.220867] ftdi_sio 2-1.4:1.0: FTDI USB Serial Device converter detected
[ 8071.220964] usb 2-1.4: Detected FT2232C
[ 8071.220970] usb 2-1.4: Number of endpoints 2
[ 8071.220976] usb 2-1.4: Endpoint 1 MaxPacketSize 64
[ 8071.220981] usb 2-1.4: Endpoint 2 MaxPacketSize 64
[ 8071.220986] usb 2-1.4: Setting MaxPacketSize 64
[ 8071.221895] usb 2-1.4: FTDI USB Serial Device converter now attached to ttyUSB0
[ 8071.222477] ftdi_sio 2-1.4:1.1: FTDI USB Serial Device converter detected
[ 8071.222571] usb 2-1.4: Detected FT2232C
[ 8071.222577] usb 2-1.4: Number of endpoints 2
[ 8071.222583] usb 2-1.4: Endpoint 1 MaxPacketSize 64
[ 8071.222588] usb 2-1.4: Endpoint 2 MaxPacketSize 64
[ 8071.222593] usb 2-1.4: Setting MaxPacketSize 64
[ 8071.223102] usb 2-1.4: FTDI USB Serial Device converter now attached to ttyUSB1
[ 8229.719572] usb 1-1.4: new high-speed USB device number 5 using ehci-pci
[ 8229.812609] usb 1-1.4: New USB device found, idVendor=18d1, idProduct=4ee6
[ 8229.812615] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 8229.812617] usb 1-1.4: Product: Nexus 4
[ 8229.812620] usb 1-1.4: Manufacturer: LGE
[ 8229.812622] usb 1-1.4: SerialNumber: 0071fcd4dc56c589
[ 8232.083393] usb 1-1.4: USB disconnect, device number 5
[ 8234.329801] usb 1-1.4: new high-speed USB device number 6 using ehci-pci
[ 8234.422839] usb 1-1.4: New USB device found, idVendor=18d1, idProduct=4ee6
[ 8234.422844] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 8234.422847] usb 1-1.4: Product: Nexus 4
[ 8234.422849] usb 1-1.4: Manufacturer: LGE
[ 8234.422852] usb 1-1.4: SerialNumber: 0071fcd4dc56c589
[ 8239.925406] perf samples too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 9305.737860] INFO: task Cache I/O:2855 blocked for more than 100 seconds.
[ 9305.737867] Not tainted 3.13.0-imre+ #327
[ 9305.737869] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 9305.737872] Cache I/O D ffff8804194ba030 5160 2855 1697 0x00000000
[ 9305.737880] ffff880035b35e48 0000000000000046 ffff880417e9a030 ffff880035b35fd8
[ 9305.737887] 0000000000013a80 0000000000013a80 ffff880417e9a030 ffff88003673d800
[ 9305.737892] 000000000041d7e2 ffff88003673d950 ffff88003673d828 ffff880035b35e88
[ 9305.737898] Call Trace:
[ 9305.737907] [<ffffffff816a6bc5>] schedule+0x65/0x70
[ 9305.737915] [<ffffffff81260c9b>] jbd2_log_wait_commit+0xbb/0x110
[ 9305.737921] [<ffffffff81091c20>] ? prepare_to_wait_event+0x110/0x110
[ 9305.737926] [<ffffffff81263383>] jbd2_complete_transaction+0x73/0xa0
[ 9305.737932] [<ffffffff8120d704>] ext4_sync_file+0x2f4/0x370
[ 9305.737937] [<ffffffff811c1ac1>] do_fsync+0x51/0x80
[ 9305.737942] [<ffffffff811c1d50>] SyS_fsync+0x10/0x20
[ 9305.737947] [<ffffffff816b3c52>] system_call_fastpath+0x16/0x1b
[ 9305.737950] no locks held by Cache I/O/2855.
[ 9453.571179] usb 2-1.4: USB disconnect, device number 9
[ 9453.571449] ftdi_sio ttyUSB0: error from flowcontrol urb
[ 9453.571799] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[ 9453.571847] ftdi_sio 2-1.4:1.0: device disconnected
[ 9453.572407] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
[ 9453.572451] ftdi_sio 2-1.4:1.1: device disconnected
[ 9455.561132] usb 2-1.4: new full-speed USB device number 10 using ehci-pci
[ 9455.655531] usb 2-1.4: New USB device found, idVendor=0403, idProduct=6010
[ 9455.655538] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 9455.655541] usb 2-1.4: Product: Dual RS232
[ 9455.655544] usb 2-1.4: Manufacturer: FTDI
[ 9455.656240] ftdi_sio 2-1.4:1.0: FTDI USB Serial Device converter detected
[ 9455.656335] usb 2-1.4: Detected FT2232C
[ 9455.656339] usb 2-1.4: Number of endpoints 2
[ 9455.656342] usb 2-1.4: Endpoint 1 MaxPacketSize 64
[ 9455.656345] usb 2-1.4: Endpoint 2 MaxPacketSize 64
[ 9455.656348] usb 2-1.4: Setting MaxPacketSize 64
[ 9455.656745] usb 2-1.4: FTDI USB Serial Device converter now attached to ttyUSB0
[ 9455.657217] ftdi_sio 2-1.4:1.1: FTDI USB Serial Device converter detected
[ 9455.657264] usb 2-1.4: Detected FT2232C
[ 9455.657266] usb 2-1.4: Number of endpoints 2
[ 9455.657267] usb 2-1.4: Endpoint 1 MaxPacketSize 64
[ 9455.657269] usb 2-1.4: Endpoint 2 MaxPacketSize 64
[ 9455.657270] usb 2-1.4: Setting MaxPacketSize 64
[ 9455.657780] usb 2-1.4: FTDI USB Serial Device converter now attached to ttyUSB1
[ 9464.584219] usb 2-1.4: USB disconnect, device number 10
[ 9464.584484] ftdi_sio ttyUSB0: error from flowcontrol urb
[ 9464.584729] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[ 9464.584753] ftdi_sio 2-1.4:1.0: device disconnected
[ 9464.585014] ftdi_sio ttyUSB1: error from flowcontrol urb
[ 9464.585483] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
[ 9464.585517] ftdi_sio 2-1.4:1.1: device disconnected
[ 9465.293796] usb 2-1.4: new full-speed USB device number 11 using ehci-pci
[ 9465.388084] usb 2-1.4: New USB device found, idVendor=0403, idProduct=6010
[ 9465.388091] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 9465.388094] usb 2-1.4: Product: Dual RS232
[ 9465.388097] usb 2-1.4: Manufacturer: FTDI
[ 9465.388802] ftdi_sio 2-1.4:1.0: FTDI USB Serial Device converter detected
[ 9465.388915] usb 2-1.4: Detected FT2232C
[ 9465.388921] usb 2-1.4: Number of endpoints 2
[ 9465.388927] usb 2-1.4: Endpoint 1 MaxPacketSize 64
[ 9465.388932] usb 2-1.4: Endpoint 2 MaxPacketSize 64
[ 9465.388937] usb 2-1.4: Setting MaxPacketSize 64
[ 9465.389453] usb 2-1.4: FTDI USB Serial Device converter now attached to ttyUSB0
[ 9465.389878] ftdi_sio 2-1.4:1.1: FTDI USB Serial Device converter detected
[ 9465.389974] usb 2-1.4: Detected FT2232C
[ 9465.389980] usb 2-1.4: Number of endpoints 2
[ 9465.389986] usb 2-1.4: Endpoint 1 MaxPacketSize 64
[ 9465.389992] usb 2-1.4: Endpoint 2 MaxPacketSize 64
[ 9465.389997] usb 2-1.4: Setting MaxPacketSize 64
[ 9465.390397] usb 2-1.4: FTDI USB Serial Device converter now attached to ttyUSB1
[ 9472.267584] usb 2-1.4: USB disconnect, device number 11
[ 9472.268406] ftdi_sio ttyUSB0: error from flowcontrol urb
[ 9472.268682] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[ 9472.268718] ftdi_sio 2-1.4:1.0: device disconnected
[ 9472.269888] ftdi_sio ttyUSB1: error from flowcontrol urb
[ 9472.270413] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
[ 9472.270470] ftdi_sio 2-1.4:1.1: device disconnected
[ 9473.489668] usb 2-1.4: new full-speed USB device number 12 using ehci-pci
[ 9473.584557] usb 2-1.4: New USB device found, idVendor=0403, idProduct=6010
[ 9473.584564] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 9473.584567] usb 2-1.4: Product: Dual RS232
[ 9473.584571] usb 2-1.4: Manufacturer: FTDI
[ 9473.585477] ftdi_sio 2-1.4:1.0: FTDI USB Serial Device converter detected
[ 9473.585569] usb 2-1.4: Detected FT2232C
[ 9473.585573] usb 2-1.4: Number of endpoints 2
[ 9473.585576] usb 2-1.4: Endpoint 1 MaxPacketSize 64
[ 9473.585579] usb 2-1.4: Endpoint 2 MaxPacketSize 64
[ 9473.585582] usb 2-1.4: Setting MaxPacketSize 64
[ 9473.586229] usb 2-1.4: FTDI USB Serial Device converter now attached to ttyUSB0
[ 9473.586583] ftdi_sio 2-1.4:1.1: FTDI USB Serial Device converter detected
[ 9473.586642] usb 2-1.4: Detected FT2232C
[ 9473.586645] usb 2-1.4: Number of endpoints 2
[ 9473.586648] usb 2-1.4: Endpoint 1 MaxPacketSize 64
[ 9473.586651] usb 2-1.4: Endpoint 2 MaxPacketSize 64
[ 9473.586654] usb 2-1.4: Setting MaxPacketSize 64
[ 9473.587144] usb 2-1.4: FTDI USB Serial Device converter now attached to ttyUSB1
[ 9756.813002] usb 2-1.4: USB disconnect, device number 12
[ 9756.813271] ftdi_sio ttyUSB0: error from flowcontrol urb
[ 9756.813622] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[ 9756.813658] ftdi_sio 2-1.4:1.0: device disconnected
[ 9756.814138] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
[ 9756.814174] ftdi_sio 2-1.4:1.1: device disconnected
[ 9757.015892] usb 2-1.4: new full-speed USB device number 13 using ehci-pci
[ 9757.110871] usb 2-1.4: New USB device found, idVendor=0403, idProduct=6010
[ 9757.110878] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 9757.110881] usb 2-1.4: Product: Dual RS232
[ 9757.110884] usb 2-1.4: Manufacturer: FTDI
[ 9757.111562] ftdi_sio 2-1.4:1.0: FTDI USB Serial Device converter detected
[ 9757.111656] usb 2-1.4: Detected FT2232C
[ 9757.111659] usb 2-1.4: Number of endpoints 2
[ 9757.111662] usb 2-1.4: Endpoint 1 MaxPacketSize 64
[ 9757.111665] usb 2-1.4: Endpoint 2 MaxPacketSize 64
[ 9757.111668] usb 2-1.4: Setting MaxPacketSize 64
[ 9757.112195] usb 2-1.4: FTDI USB Serial Device converter now attached to ttyUSB0
[ 9757.112543] ftdi_sio 2-1.4:1.1: FTDI USB Serial Device converter detected
[ 9757.112600] usb 2-1.4: Detected FT2232C
[ 9757.112603] usb 2-1.4: Number of endpoints 2
[ 9757.112606] usb 2-1.4: Endpoint 1 MaxPacketSize 64
[ 9757.112609] usb 2-1.4: Endpoint 2 MaxPacketSize 64
[ 9757.112612] usb 2-1.4: Setting MaxPacketSize 64
[ 9757.113183] usb 2-1.4: FTDI USB Serial Device converter now attached to ttyUSB1
[11241.569133] ftdi_sio ttyUSB0: failed to get modem status: -32
[11241.775760] usb 2-1.4: USB disconnect, device number 13
[11241.776027] ftdi_sio ttyUSB0: error from flowcontrol urb
[11241.776325] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[11241.776359] ftdi_sio 2-1.4:1.0: device disconnected
[11241.776732] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
[11241.776751] ftdi_sio 2-1.4:1.1: device disconnected
[11244.025104] usb 2-1.4: new full-speed USB device number 14 using ehci-pci
[11244.120043] usb 2-1.4: New USB device found, idVendor=0403, idProduct=6010
[11244.120049] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[11244.120053] usb 2-1.4: Product: Dual RS232
[11244.120056] usb 2-1.4: Manufacturer: FTDI
[11244.120758] ftdi_sio 2-1.4:1.0: FTDI USB Serial Device converter detected
[11244.120905] usb 2-1.4: Detected FT2232C
[11244.120910] usb 2-1.4: Number of endpoints 2
[11244.120915] usb 2-1.4: Endpoint 1 MaxPacketSize 64
[11244.120918] usb 2-1.4: Endpoint 2 MaxPacketSize 64
[11244.120921] usb 2-1.4: Setting MaxPacketSize 64
[11244.121374] usb 2-1.4: FTDI USB Serial Device converter now attached to ttyUSB0
[11244.121777] ftdi_sio 2-1.4:1.1: FTDI USB Serial Device converter detected
[11244.121835] usb 2-1.4: Detected FT2232C
[11244.121838] usb 2-1.4: Number of endpoints 2
[11244.121841] usb 2-1.4: Endpoint 1 MaxPacketSize 64
[11244.121844] usb 2-1.4: Endpoint 2 MaxPacketSize 64
[11244.121847] usb 2-1.4: Setting MaxPacketSize 64
[11244.122206] usb 2-1.4: FTDI USB Serial Device converter now attached to ttyUSB1
[12584.525663] usb 1-1.4: USB disconnect, device number 6
[14502.192531] kworker/u16:5 (105) used greatest stack depth: 3512 bytes left
[14862.237347] usb 2-1.4: USB disconnect, device number 14
[14862.237616] ftdi_sio ttyUSB0: error from flowcontrol urb
[14862.237953] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[14862.238061] ftdi_sio 2-1.4:1.0: device disconnected
[14862.238565] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
[14862.238613] ftdi_sio 2-1.4:1.1: device disconnected
[14864.484865] usb 2-1.4: new full-speed USB device number 15 using ehci-pci
[14864.579990] usb 2-1.4: New USB device found, idVendor=0403, idProduct=6010
[14864.579996] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[14864.580000] usb 2-1.4: Product: Dual RS232
[14864.580003] usb 2-1.4: Manufacturer: FTDI
[14864.580704] ftdi_sio 2-1.4:1.0: FTDI USB Serial Device converter detected
[14864.580855] usb 2-1.4: Detected FT2232C
[14864.580862] usb 2-1.4: Number of endpoints 2
[14864.580868] usb 2-1.4: Endpoint 1 MaxPacketSize 64
[14864.580875] usb 2-1.4: Endpoint 2 MaxPacketSize 64
[14864.580880] usb 2-1.4: Setting MaxPacketSize 64
[14864.581453] usb 2-1.4: FTDI USB Serial Device converter now attached to ttyUSB0
[14864.581837] ftdi_sio 2-1.4:1.1: FTDI USB Serial Device converter detected
[14864.581898] usb 2-1.4: Detected FT2232C
[14864.581902] usb 2-1.4: Number of endpoints 2
[14864.581905] usb 2-1.4: Endpoint 1 MaxPacketSize 64
[14864.581908] usb 2-1.4: Endpoint 2 MaxPacketSize 64
[14864.581910] usb 2-1.4: Setting MaxPacketSize 64
[14864.582518] usb 2-1.4: FTDI USB Serial Device converter now attached to ttyUSB1
[15208.552297] INFO: task Cache I/O:2855 blocked for more than 100 seconds.
[15208.552305] Not tainted 3.13.0-imre+ #327
[15208.552307] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[15208.552310] Cache I/O D ffff8804194b8000 5160 2855 1697 0x00000004
[15208.552318] ffff880035b35e48 0000000000000046 ffff880417e9a030 ffff880035b35fd8
[15208.552325] 0000000000013a80 0000000000013a80 ffff880417e9a030 ffff88003673d800
[15208.552330] 000000000043c31a ffff88003673d950 ffff88003673d828 ffff880035b35e88
[15208.552336] Call Trace:
[15208.552345] [<ffffffff816a6bc5>] schedule+0x65/0x70
[15208.552353] [<ffffffff81260c9b>] jbd2_log_wait_commit+0xbb/0x110
[15208.552359] [<ffffffff81091c20>] ? prepare_to_wait_event+0x110/0x110
[15208.552364] [<ffffffff81263383>] jbd2_complete_transaction+0x73/0xa0
[15208.552370] [<ffffffff8120d704>] ext4_sync_file+0x2f4/0x370
[15208.552375] [<ffffffff811c1ac1>] do_fsync+0x51/0x80
[15208.552380] [<ffffffff811c1d50>] SyS_fsync+0x10/0x20
[15208.552385] [<ffffffff816b3c52>] system_call_fastpath+0x16/0x1b
[15208.552389] no locks held by Cache I/O/2855.
[15607.792078] usb 2-1.2: USB disconnect, device number 4
[33484.477546] type=1006 audit(1392935827.805:2): pid=23433 uid=0 old auid=4294967295 new auid=1000 old ses=4294967295 new ses=1 res=1
[33611.965380] type=1006 audit(1392935955.228:3): pid=23523 uid=0 old auid=4294967295 new auid=1000 old ses=4294967295 new ses=2 res=1
[35177.485306] type=1006 audit(1392937520.005:4): pid=23757 uid=0 old auid=4294967295 new auid=1000 old ses=4294967295 new ses=3 res=1
[35339.760157] type=1006 audit(1392937682.199:5): pid=23827 uid=0 old auid=4294967295 new auid=1000 old ses=4294967295 new ses=4 res=1
[72974.578854] type=1006 audit(1392975299.150:6): pid=27780 uid=0 old auid=4294967295 new auid=1000 old ses=4294967295 new ses=5 res=1
[80078.890970] usb 2-1.2: new high-speed USB device number 16 using ehci-pci
[80078.983263] usb 2-1.2: New USB device found, idVendor=0409, idProduct=005a
[80078.983269] usb 2-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[80078.983837] hub 2-1.2:1.0: USB hub found
[80078.983997] hub 2-1.2:1.0: 4 ports detected
[80112.726967] usb 1-1.4: new high-speed USB device number 7 using ehci-pci
[80112.820657] usb 1-1.4: New USB device found, idVendor=18d1, idProduct=4ee6
[80112.820663] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[80112.820666] usb 1-1.4: Product: Nexus 4
[80112.820669] usb 1-1.4: Manufacturer: LGE
[80112.820672] usb 1-1.4: SerialNumber: 0071fcd4dc56c589
[80116.342638] usb 2-1.4: USB disconnect, device number 15
[80116.342902] ftdi_sio ttyUSB0: error from flowcontrol urb
[80116.343222] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[80116.343258] ftdi_sio 2-1.4:1.0: device disconnected
[80116.343738] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
[80116.343774] ftdi_sio 2-1.4:1.1: device disconnected
[80130.371360] usb 2-1.4: new full-speed USB device number 17 using ehci-pci
[80130.466246] usb 2-1.4: New USB device found, idVendor=0403, idProduct=6010
[80130.466251] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[80130.466254] usb 2-1.4: Product: Dual RS232
[80130.466256] usb 2-1.4: Manufacturer: FTDI
[80130.466913] ftdi_sio 2-1.4:1.0: FTDI USB Serial Device converter detected
[80130.466983] usb 2-1.4: Detected FT2232C
[80130.466986] usb 2-1.4: Number of endpoints 2
[80130.466990] usb 2-1.4: Endpoint 1 MaxPacketSize 64
[80130.466993] usb 2-1.4: Endpoint 2 MaxPacketSize 64
[80130.466996] usb 2-1.4: Setting MaxPacketSize 64
[80130.467443] usb 2-1.4: FTDI USB Serial Device converter now attached to ttyUSB0
[80130.467888] ftdi_sio 2-1.4:1.1: FTDI USB Serial Device converter detected
[80130.467927] usb 2-1.4: Detected FT2232C
[80130.467930] usb 2-1.4: Number of endpoints 2
[80130.467932] usb 2-1.4: Endpoint 1 MaxPacketSize 64
[80130.467934] usb 2-1.4: Endpoint 2 MaxPacketSize 64
[80130.467935] usb 2-1.4: Setting MaxPacketSize 64
[80130.468317] usb 2-1.4: FTDI USB Serial Device converter now attached to ttyUSB1
[80259.511519] usb 2-1.4: USB disconnect, device number 17
[80259.511786] ftdi_sio ttyUSB0: error from flowcontrol urb
[80259.512122] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[80259.512159] ftdi_sio 2-1.4:1.0: device disconnected
[80259.512630] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
[80259.512665] ftdi_sio 2-1.4:1.1: device disconnected
[80259.744784] usb 2-1.4: new full-speed USB device number 18 using ehci-pci
[80259.839203] usb 2-1.4: New USB device found, idVendor=0403, idProduct=6010
[80259.839210] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[80259.839213] usb 2-1.4: Product: Dual RS232
[80259.839216] usb 2-1.4: Manufacturer: FTDI
[80259.839993] ftdi_sio 2-1.4:1.0: FTDI USB Serial Device converter detected
[80259.840103] usb 2-1.4: Detected FT2232C
[80259.840107] usb 2-1.4: Number of endpoints 2
[80259.840110] usb 2-1.4: Endpoint 1 MaxPacketSize 64
[80259.840113] usb 2-1.4: Endpoint 2 MaxPacketSize 64
[80259.840116] usb 2-1.4: Setting MaxPacketSize 64
[80259.840552] usb 2-1.4: FTDI USB Serial Device converter now attached to ttyUSB0
[80259.840972] ftdi_sio 2-1.4:1.1: FTDI USB Serial Device converter detected
[80259.841029] usb 2-1.4: Detected FT2232C
[80259.841032] usb 2-1.4: Number of endpoints 2
[80259.841035] usb 2-1.4: Endpoint 1 MaxPacketSize 64
[80259.841038] usb 2-1.4: Endpoint 2 MaxPacketSize 64
[80259.841041] usb 2-1.4: Setting MaxPacketSize 64
[80259.841589] usb 2-1.4: FTDI USB Serial Device converter now attached to ttyUSB1
[80285.566754] usb 1-1.3: USB disconnect, device number 4
[81039.642077] usb 2-1.4: USB disconnect, device number 18
[81039.642338] ftdi_sio ttyUSB0: error from flowcontrol urb
[81039.642626] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[81039.642659] ftdi_sio 2-1.4:1.0: device disconnected
[81039.643290] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
[81039.643338] ftdi_sio 2-1.4:1.1: device disconnected
[81051.552547] usb 1-1.3: new low-speed USB device number 8 using ehci-pci
[81051.651862] usb 1-1.3: New USB device found, idVendor=046d, idProduct=c52a
[81051.651868] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[81051.651872] usb 1-1.3: Product: 2.4GHz Cordless Desktop
[81051.651875] usb 1-1.3: Manufacturer: Logitech
[81051.657647] input: Logitech 2.4GHz Cordless Desktop as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input18
[81051.658071] hid-generic 0003:046D:C52A.0005: input,hidraw0: USB HID v1.11 Keyboard [Logitech 2.4GHz Cordless Desktop] on usb-0000:00:1a.0-1.3/input0
[81051.666993] input: Logitech 2.4GHz Cordless Desktop as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.1/input/input19
[81051.667479] hid-generic 0003:046D:C52A.0006: input,hidraw1: USB HID v1.11 Mouse [Logitech 2.4GHz Cordless Desktop] on usb-0000:00:1a.0-1.3/input1
[81070.563663] usb 1-1.4: USB disconnect, device number 7
[81354.608431] usb 2-1.4: new full-speed USB device number 19 using ehci-pci
[81354.703032] usb 2-1.4: New USB device found, idVendor=0403, idProduct=6010
[81354.703039] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[81354.703043] usb 2-1.4: Product: Dual RS232
[81354.703046] usb 2-1.4: Manufacturer: FTDI
[81354.703715] ftdi_sio 2-1.4:1.0: FTDI USB Serial Device converter detected
[81354.703811] usb 2-1.4: Detected FT2232C
[81354.703817] usb 2-1.4: Number of endpoints 2
[81354.703822] usb 2-1.4: Endpoint 1 MaxPacketSize 64
[81354.703827] usb 2-1.4: Endpoint 2 MaxPacketSize 64
[81354.703833] usb 2-1.4: Setting MaxPacketSize 64
[81354.704317] usb 2-1.4: FTDI USB Serial Device converter now attached to ttyUSB0
[81354.704858] ftdi_sio 2-1.4:1.1: FTDI USB Serial Device converter detected
[81354.704991] usb 2-1.4: Detected FT2232C
[81354.704997] usb 2-1.4: Number of endpoints 2
[81354.705002] usb 2-1.4: Endpoint 1 MaxPacketSize 64
[81354.705007] usb 2-1.4: Endpoint 2 MaxPacketSize 64
[81354.705012] usb 2-1.4: Setting MaxPacketSize 64
[81354.705390] usb 2-1.4: FTDI USB Serial Device converter now attached to ttyUSB1
[81356.201840] usb 2-1.4: USB disconnect, device number 19
[81356.202038] ftdi_sio ttyUSB0: error from flowcontrol urb
[81356.202302] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[81356.202335] ftdi_sio 2-1.4:1.0: device disconnected
[81356.202839] ftdi_sio ttyUSB1: error from flowcontrol urb
[81356.203631] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
[81356.203704] ftdi_sio 2-1.4:1.1: device disconnected
[81368.951170] usb 2-1.4: new full-speed USB device number 20 using ehci-pci
[81369.046077] usb 2-1.4: New USB device found, idVendor=0403, idProduct=6010
[81369.046083] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[81369.046087] usb 2-1.4: Product: Dual RS232
[81369.046090] usb 2-1.4: Manufacturer: FTDI
[81369.046852] ftdi_sio 2-1.4:1.0: FTDI USB Serial Device converter detected
[81369.046924] usb 2-1.4: Detected FT2232C
[81369.046928] usb 2-1.4: Number of endpoints 2
[81369.046931] usb 2-1.4: Endpoint 1 MaxPacketSize 64
[81369.046934] usb 2-1.4: Endpoint 2 MaxPacketSize 64
[81369.046937] usb 2-1.4: Setting MaxPacketSize 64
[81369.047594] usb 2-1.4: FTDI USB Serial Device converter now attached to ttyUSB0
[81369.048075] ftdi_sio 2-1.4:1.1: FTDI USB Serial Device converter detected
[81369.048168] usb 2-1.4: Detected FT2232C
[81369.048171] usb 2-1.4: Number of endpoints 2
[81369.048174] usb 2-1.4: Endpoint 1 MaxPacketSize 64
[81369.048177] usb 2-1.4: Endpoint 2 MaxPacketSize 64
[81369.048180] usb 2-1.4: Setting MaxPacketSize 64
[81369.048526] usb 2-1.4: FTDI USB Serial Device converter now attached to ttyUSB1
[81374.642363] usb 2-1.4: USB disconnect, device number 20
[81374.642643] ftdi_sio ttyUSB0: error from flowcontrol urb
[81374.642997] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[81374.643050] ftdi_sio 2-1.4:1.0: device disconnected
[81374.643466] ftdi_sio ttyUSB1: error from flowcontrol urb
[81374.643757] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
[81374.643799] ftdi_sio 2-1.4:1.1: device disconnected
[81414.527995] usb 1-1.3: USB disconnect, device number 8
[81416.845929] usb 2-1.4: new full-speed USB device number 21 using ehci-pci
[81416.940842] usb 2-1.4: New USB device found, idVendor=0403, idProduct=6010
[81416.940848] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[81416.940852] usb 2-1.4: Product: Dual RS232
[81416.940855] usb 2-1.4: Manufacturer: FTDI
[81416.941614] ftdi_sio 2-1.4:1.0: FTDI USB Serial Device converter detected
[81416.941769] usb 2-1.4: Detected FT2232C
[81416.941773] usb 2-1.4: Number of endpoints 2
[81416.941776] usb 2-1.4: Endpoint 1 MaxPacketSize 64
[81416.941779] usb 2-1.4: Endpoint 2 MaxPacketSize 64
[81416.941786] usb 2-1.4: Setting MaxPacketSize 64
[81416.942242] usb 2-1.4: FTDI USB Serial Device converter now attached to ttyUSB0
[81416.942588] ftdi_sio 2-1.4:1.1: FTDI USB Serial Device converter detected
[81416.942645] usb 2-1.4: Detected FT2232C
[81416.942649] usb 2-1.4: Number of endpoints 2
[81416.942652] usb 2-1.4: Endpoint 1 MaxPacketSize 64
[81416.942655] usb 2-1.4: Endpoint 2 MaxPacketSize 64
[81416.942658] usb 2-1.4: Setting MaxPacketSize 64
[81416.943043] usb 2-1.4: FTDI USB Serial Device converter now attached to ttyUSB1
[81435.298688] usb 1-1.3: new low-speed USB device number 9 using ehci-pci
[81435.397478] usb 1-1.3: New USB device found, idVendor=046d, idProduct=c52a
[81435.397484] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[81435.397488] usb 1-1.3: Product: 2.4GHz Cordless Desktop
[81435.397491] usb 1-1.3: Manufacturer: Logitech
[81435.403171] input: Logitech 2.4GHz Cordless Desktop as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input20
[81435.403570] hid-generic 0003:046D:C52A.0007: input,hidraw0: USB HID v1.11 Keyboard [Logitech 2.4GHz Cordless Desktop] on usb-0000:00:1a.0-1.3/input0
[81435.412219] input: Logitech 2.4GHz Cordless Desktop as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.1/input/input21
[81435.412787] hid-generic 0003:046D:C52A.0008: input,hidraw1: USB HID v1.11 Mouse [Logitech 2.4GHz Cordless Desktop] on usb-0000:00:1a.0-1.3/input1
[81461.767172] ftdi_sio ttyUSB0: failed to get modem status: -32
[81461.767535] ftdi_sio ttyUSB0: error from flowcontrol urb
[81461.768662] ftdi_sio ttyUSB0: ftdi_set_termios FAILED to set databits/stopbits/parity
[81461.769036] ftdi_sio ttyUSB0: ftdi_set_termios urb failed to set baudrate
[81461.769410] ftdi_sio ttyUSB0: urb failed to set to xon/xoff flow control
[81461.770789] ftdi_sio ttyUSB0: ftdi_set_termios urb failed to set baudrate
[81461.771165] ftdi_sio ttyUSB0: urb failed to clear flow control
[81461.771538] ftdi_sio ttyUSB0: Unable to write latency timer: -32
[81461.771960] ftdi_sio ttyUSB0: failed to get modem status: -32
[81461.772793] ftdi_sio ttyUSB0: ftdi_set_termios urb failed to set baudrate
[81461.773163] ftdi_sio ttyUSB0: urb failed to clear flow control
[81461.773699] ftdi_sio ttyUSB0: failed to get modem status: -32
[81461.774550] ftdi_sio ttyUSB0: urb failed to clear flow control
[81461.774915] ftdi_sio ttyUSB0: urb failed to clear flow control
[81461.775665] ftdi_sio ttyUSB0: urb failed to clear flow control
[81461.778303] ftdi_sio ttyUSB0: failed to get modem status: -32
[81461.778667] ftdi_sio ttyUSB0: failed to get modem status: -32
[81461.978027] usb 2-1.4: USB disconnect, device number 21
[81461.978299] ftdi_sio ttyUSB0: error from flowcontrol urb
[81461.978657] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[81461.978705] ftdi_sio 2-1.4:1.0: device disconnected
[81461.979321] ftdi_sio ttyUSB1: error from flowcontrol urb
[81461.979620] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
[81461.979664] ftdi_sio 2-1.4:1.1: device disconnected
[81462.687648] usb 2-1.4: new full-speed USB device number 22 using ehci-pci
[81462.782202] usb 2-1.4: New USB device found, idVendor=0403, idProduct=6010
[81462.782208] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[81462.782212] usb 2-1.4: Product: Dual RS232
[81462.782215] usb 2-1.4: Manufacturer: FTDI
[81462.782966] ftdi_sio 2-1.4:1.0: FTDI USB Serial Device converter detected
[81462.783086] usb 2-1.4: Detected FT2232C
[81462.783090] usb 2-1.4: Number of endpoints 2
[81462.783093] usb 2-1.4: Endpoint 1 MaxPacketSize 64
[81462.783096] usb 2-1.4: Endpoint 2 MaxPacketSize 64
[81462.783098] usb 2-1.4: Setting MaxPacketSize 64
[81462.783572] usb 2-1.4: FTDI USB Serial Device converter now attached to ttyUSB0
[81462.783947] ftdi_sio 2-1.4:1.1: FTDI USB Serial Device converter detected
[81462.784006] usb 2-1.4: Detected FT2232C
[81462.784009] usb 2-1.4: Number of endpoints 2
[81462.784012] usb 2-1.4: Endpoint 1 MaxPacketSize 64
[81462.784015] usb 2-1.4: Endpoint 2 MaxPacketSize 64
[81462.784018] usb 2-1.4: Setting MaxPacketSize 64
[81462.784427] usb 2-1.4: FTDI USB Serial Device converter now attached to ttyUSB1
[81496.041368] usb 2-1.4: USB disconnect, device number 22
[81496.041962] ftdi_sio ttyUSB0: error from flowcontrol urb
[81496.042337] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[81496.042387] ftdi_sio 2-1.4:1.0: device disconnected
[81496.042786] ftdi_sio ttyUSB1: error from flowcontrol urb
[81496.043080] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
[81496.043112] ftdi_sio 2-1.4:1.1: device disconnected
[81496.751930] usb 2-1.4: new full-speed USB device number 23 using ehci-pci
[81498.800801] usb 2-1.4: new full-speed USB device number 24 using ehci-pci
[81498.895183] usb 2-1.4: New USB device found, idVendor=0403, idProduct=6010
[81498.895190] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[81498.895193] usb 2-1.4: Product: Dual RS232
[81498.895196] usb 2-1.4: Manufacturer: FTDI
[81498.895851] ftdi_sio 2-1.4:1.0: FTDI USB Serial Device converter detected
[81498.895925] usb 2-1.4: Detected FT2232C
[81498.895927] usb 2-1.4: Number of endpoints 2
[81498.895929] usb 2-1.4: Endpoint 1 MaxPacketSize 64
[81498.895931] usb 2-1.4: Endpoint 2 MaxPacketSize 64
[81498.895933] usb 2-1.4: Setting MaxPacketSize 64
[81498.896286] usb 2-1.4: FTDI USB Serial Device converter now attached to ttyUSB0
[81498.896561] ftdi_sio 2-1.4:1.1: FTDI USB Serial Device converter detected
[81498.896618] usb 2-1.4: Detected FT2232C
[81498.896621] usb 2-1.4: Number of endpoints 2
[81498.896624] usb 2-1.4: Endpoint 1 MaxPacketSize 64
[81498.896626] usb 2-1.4: Endpoint 2 MaxPacketSize 64
[81498.896629] usb 2-1.4: Setting MaxPacketSize 64
[81498.896984] usb 2-1.4: FTDI USB Serial Device converter now attached to ttyUSB1
[84669.058349] usb 1-1.3: USB disconnect, device number 9
[84756.147185] usb 2-1.4: USB disconnect, device number 24
[84756.147730] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[84756.147769] ftdi_sio 2-1.4:1.0: device disconnected
[84756.148248] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
[84756.148284] ftdi_sio 2-1.4:1.1: device disconnected
[84758.651395] usb 2-1.4: new full-speed USB device number 25 using ehci-pci
[84758.745769] usb 2-1.4: New USB device found, idVendor=0403, idProduct=6010
[84758.745776] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[84758.745780] usb 2-1.4: Product: Dual RS232
[84758.745783] usb 2-1.4: Manufacturer: FTDI
[84758.746436] ftdi_sio 2-1.4:1.0: FTDI USB Serial Device converter detected
[84758.746520] usb 2-1.4: Detected FT2232C
[84758.746523] usb 2-1.4: Number of endpoints 2
[84758.746527] usb 2-1.4: Endpoint 1 MaxPacketSize 64
[84758.746530] usb 2-1.4: Endpoint 2 MaxPacketSize 64
[84758.746532] usb 2-1.4: Setting MaxPacketSize 64
[84758.746968] usb 2-1.4: FTDI USB Serial Device converter now attached to ttyUSB0
[84758.747447] ftdi_sio 2-1.4:1.1: FTDI USB Serial Device converter detected
[84758.747511] usb 2-1.4: Detected FT2232C
[84758.747515] usb 2-1.4: Number of endpoints 2
[84758.747518] usb 2-1.4: Endpoint 1 MaxPacketSize 64
[84758.747521] usb 2-1.4: Endpoint 2 MaxPacketSize 64
[84758.747524] usb 2-1.4: Setting MaxPacketSize 64
[84758.747980] usb 2-1.4: FTDI USB Serial Device converter now attached to ttyUSB1
[85420.257214] usb 2-1.4: USB disconnect, device number 25
[85420.257756] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[85420.257795] ftdi_sio 2-1.4:1.0: device disconnected
[85420.258275] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
[85420.258310] ftdi_sio 2-1.4:1.1: device disconnected
[85428.141020] usb 2-1.4: new full-speed USB device number 26 using ehci-pci
[85428.236440] usb 2-1.4: New USB device found, idVendor=0403, idProduct=6010
[85428.236447] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[85428.236450] usb 2-1.4: Product: Dual RS232
[85428.236453] usb 2-1.4: Manufacturer: FTDI
[85428.237739] ftdi_sio 2-1.4:1.0: FTDI USB Serial Device converter detected
[85428.237843] usb 2-1.4: Detected FT2232C
[85428.237849] usb 2-1.4: Number of endpoints 2
[85428.237855] usb 2-1.4: Endpoint 1 MaxPacketSize 64
[85428.237860] usb 2-1.4: Endpoint 2 MaxPacketSize 64
[85428.237865] usb 2-1.4: Setting MaxPacketSize 64
[85428.238319] usb 2-1.4: FTDI USB Serial Device converter now attached to ttyUSB0
[85428.238793] ftdi_sio 2-1.4:1.1: FTDI USB Serial Device converter detected
[85428.238853] usb 2-1.4: Detected FT2232C
[85428.238856] usb 2-1.4: Number of endpoints 2
[85428.238859] usb 2-1.4: Endpoint 1 MaxPacketSize 64
[85428.238862] usb 2-1.4: Endpoint 2 MaxPacketSize 64
[85428.238865] usb 2-1.4: Setting MaxPacketSize 64
[85428.239247] usb 2-1.4: FTDI USB Serial Device converter now attached to ttyUSB1
[85431.974714] usb 1-1.3: new low-speed USB device number 10 using ehci-pci
[85432.073756] usb 1-1.3: New USB device found, idVendor=046d, idProduct=c52a
[85432.073759] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[85432.073761] usb 1-1.3: Product: 2.4GHz Cordless Desktop
[85432.073762] usb 1-1.3: Manufacturer: Logitech
[85432.079097] input: Logitech 2.4GHz Cordless Desktop as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input22
[85432.079376] hid-generic 0003:046D:C52A.0009: input,hidraw0: USB HID v1.11 Keyboard [Logitech 2.4GHz Cordless Desktop] on usb-0000:00:1a.0-1.3/input0
[85432.087619] input: Logitech 2.4GHz Cordless Desktop as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.1/input/input23
[85432.087971] hid-generic 0003:046D:C52A.000A: input,hidraw1: USB HID v1.11 Mouse [Logitech 2.4GHz Cordless Desktop] on usb-0000:00:1a.0-1.3/input1
[85713.254204] usb 2-1.4: USB disconnect, device number 26
[85713.254762] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[85713.254801] ftdi_sio 2-1.4:1.0: device disconnected
[85713.255280] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
[85713.255316] ftdi_sio 2-1.4:1.1: device disconnected
[85716.269705] usb 2-1.4: new full-speed USB device number 27 using ehci-pci
[85716.367943] usb 2-1.4: New USB device found, idVendor=0403, idProduct=6010
[85716.367948] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[85716.367950] usb 2-1.4: Product: Dual RS232
[85716.367953] usb 2-1.4: Manufacturer: FTDI
[85716.368608] ftdi_sio 2-1.4:1.0: FTDI USB Serial Device converter detected
[85716.368661] usb 2-1.4: Detected FT2232C
[85716.368664] usb 2-1.4: Number of endpoints 2
[85716.368666] usb 2-1.4: Endpoint 1 MaxPacketSize 64
[85716.368669] usb 2-1.4: Endpoint 2 MaxPacketSize 64
[85716.368671] usb 2-1.4: Setting MaxPacketSize 64
[85716.369078] usb 2-1.4: FTDI USB Serial Device converter now attached to ttyUSB0
[85716.369476] ftdi_sio 2-1.4:1.1: FTDI USB Serial Device converter detected
[85716.369515] usb 2-1.4: Detected FT2232C
[85716.369517] usb 2-1.4: Number of endpoints 2
[85716.369520] usb 2-1.4: Endpoint 1 MaxPacketSize 64
[85716.369529] usb 2-1.4: Endpoint 2 MaxPacketSize 64
[85716.369532] usb 2-1.4: Setting MaxPacketSize 64
[85716.369886] usb 2-1.4: FTDI USB Serial Device converter now attached to ttyUSB1
[85970.651155] usb 2-1.4: USB disconnect, device number 27
[85970.651699] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[85970.651739] ftdi_sio 2-1.4:1.0: device disconnected
[85970.652218] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
[85970.652254] ftdi_sio 2-1.4:1.1: device disconnected
[85971.010603] usb 2-1.4: new full-speed USB device number 28 using ehci-pci
[85971.105270] usb 2-1.4: New USB device found, idVendor=0403, idProduct=6010
[85971.105276] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[85971.105280] usb 2-1.4: Product: Dual RS232
[85971.105283] usb 2-1.4: Manufacturer: FTDI
[85971.105947] ftdi_sio 2-1.4:1.0: FTDI USB Serial Device converter detected
[85971.106058] usb 2-1.4: Detected FT2232C
[85971.106061] usb 2-1.4: Number of endpoints 2
[85971.106064] usb 2-1.4: Endpoint 1 MaxPacketSize 64
[85971.106067] usb 2-1.4: Endpoint 2 MaxPacketSize 64
[85971.106070] usb 2-1.4: Setting MaxPacketSize 64
[85971.106502] usb 2-1.4: FTDI USB Serial Device converter now attached to ttyUSB0
[85971.106931] ftdi_sio 2-1.4:1.1: FTDI USB Serial Device converter detected
[85971.107031] usb 2-1.4: Detected FT2232C
[85971.107037] usb 2-1.4: Number of endpoints 2
[85971.107042] usb 2-1.4: Endpoint 1 MaxPacketSize 64
[85971.107048] usb 2-1.4: Endpoint 2 MaxPacketSize 64
[85971.107053] usb 2-1.4: Setting MaxPacketSize 64
[85971.107486] usb 2-1.4: FTDI USB Serial Device converter now attached to ttyUSB1
[86517.459670] usb 2-1.4: USB disconnect, device number 28
[86517.460219] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[86517.460259] ftdi_sio 2-1.4:1.0: device disconnected
[86517.460707] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
[86517.460738] ftdi_sio 2-1.4:1.1: device disconnected
[86600.697409] usb 2-1.2: USB disconnect, device number 16
[86619.594391] usb 2-1.2: new high-speed USB device number 29 using ehci-pci
[86620.362725] usb 2-1.2: new high-speed USB device number 30 using ehci-pci
[86620.455034] usb 2-1.2: New USB device found, idVendor=0409, idProduct=005a
[86620.455041] usb 2-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[86620.455598] hub 2-1.2:1.0: USB hub found
[86620.455759] hub 2-1.2:1.0: 4 ports detected
[86621.955195] usb 2-1.2: USB disconnect, device number 30
[86644.690287] usb 2-1.2: new high-speed USB device number 31 using ehci-pci
[86645.178304] usb 2-1.2: device not accepting address 31, error -71
[86645.394561] usb 2-1.2: new high-speed USB device number 33 using ehci-pci
[86645.486843] usb 2-1.2: New USB device found, idVendor=0409, idProduct=005a
[86645.486848] usb 2-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[86645.487144] hub 2-1.2:1.0: USB hub found
[86645.487212] hub 2-1.2:1.0: 4 ports detected
[86647.054603] usb 2-1.2: USB disconnect, device number 33
[86663.387163] usb 2-1.2: new high-speed USB device number 34 using ehci-pci
[86663.899406] usb 2-1.2: new high-speed USB device number 35 using ehci-pci
[86663.991682] usb 2-1.2: New USB device found, idVendor=0409, idProduct=005a
[86663.991689] usb 2-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[86663.992089] hub 2-1.2:1.0: USB hub found
[86663.992294] hub 2-1.2:1.0: 4 ports detected
[86666.007185] usb 2-1.2: USB disconnect, device number 35
[86695.914570] usb 2-1.2: new high-speed USB device number 36 using ehci-pci
[86696.402686] usb 2-1.2: device not accepting address 36, error -71
[86696.618885] usb 2-1.2: new high-speed USB device number 38 using ehci-pci
[86696.711597] usb 2-1.2: New USB device found, idVendor=0409, idProduct=005a
[86696.711603] usb 2-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[86696.712131] hub 2-1.2:1.0: USB hub found
[86696.712291] hub 2-1.2:1.0: 4 ports detected
[86881.144870] usb 2-1.2: USB disconnect, device number 38
[87769.812428] usb 2-1.2: new high-speed USB device number 39 using ehci-pci
[87770.580740] usb 2-1.2: new high-speed USB device number 40 using ehci-pci
[87770.673024] usb 2-1.2: New USB device found, idVendor=0409, idProduct=005a
[87770.673030] usb 2-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[87770.673446] hub 2-1.2:1.0: USB hub found
[87770.673641] hub 2-1.2:1.0: 4 ports detected
[88032.032811] usb 1-1.1: new high-speed USB device number 11 using ehci-pci
[88032.132233] usb 1-1.1: New USB device found, idVendor=18a5, idProduct=0302
[88032.132240] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[88032.132244] usb 1-1.1: Product: STORE N GO
[88032.132247] usb 1-1.1: Manufacturer: Verbatim
[88032.132250] usb 1-1.1: SerialNumber: 07BB01013C483120
[88032.132850] usb-storage 1-1.1:1.0: USB Mass Storage device detected
[88032.133127] scsi7 : usb-storage 1-1.1:1.0
[88033.166905] scsi 7:0:0:0: Direct-Access Verbatim STORE N GO 5.00 PQ: 0 ANSI: 4
[88033.168228] sd 7:0:0:0: Attached scsi generic sg7 type 0
[88034.567777] sd 7:0:0:0: [sdg] 31248384 512-byte logical blocks: (15.9 GB/14.9 GiB)
[88034.568580] sd 7:0:0:0: [sdg] Write Protect is off
[88034.568585] sd 7:0:0:0: [sdg] Mode Sense: 23 00 00 00
[88034.569305] sd 7:0:0:0: [sdg] No Caching mode page found
[88034.569310] sd 7:0:0:0: [sdg] Assuming drive cache: write through
[88034.574718] sd 7:0:0:0: [sdg] No Caching mode page found
[88034.574725] sd 7:0:0:0: [sdg] Assuming drive cache: write through
[88034.607334] sdg: sdg1 sdg2
[88034.611203] sd 7:0:0:0: [sdg] No Caching mode page found
[88034.611210] sd 7:0:0:0: [sdg] Assuming drive cache: write through
[88034.611214] sd 7:0:0:0: [sdg] Attached SCSI removable disk
[88036.411063] ISO 9660 Extensions: Microsoft Joliet Level 3
[88036.416542] ISO 9660 Extensions: RRIP_1991A
[88036.424202] init: ureadahead-other main process (30128) terminated with status 2
[88274.377324] usb 1-1.1: USB disconnect, device number 11
[88274.416168] ------------[ cut here ]------------
[88274.416180] WARNING: CPU: 3 PID: 30190 at fs/sysfs/group.c:214 sysfs_remove_group+0x53/0xd0()
[88274.416184] sysfs group ffffffff81c99820 not found for kobject 'target7:0:0'
[88274.416186] Modules linked in: nls_utf8 fuse rfcomm bnep bluetooth rfkill snd_hda_codec_hdmi snd_hda_codec_realtek kvm_intel kvm crc32c_intel snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss ftdi_sio usbserial snd_pcm cdc_acm snd_seq_dummy snd_page_alloc snd_seq_oss microcode serio_raw i915 snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_seq_device snd_timer snd cfbfillrect soundcore cfbimgblt i2c_algo_bit cfbcopyarea drm_kms_helper lpc_ich drm mfd_core usb_storage usbhid
[88274.416236] CPU: 3 PID: 30190 Comm: umount Not tainted 3.13.0-imre+ #327
[88274.416239] Hardware name: Dell Inc. XPS 8300 /0Y2MRG, BIOS A03 02/15/2011
[88274.416241] 0000000000000009 ffff8803b7b6fb48 ffffffff816a32a6 ffff8803b7b6fb90
[88274.416248] ffff8803b7b6fb80 ffffffff8104f75d 0000000000000000 ffffffff81c99820
[88274.416253] ffff880027632838 ffff88015cbca278 ffff8803bf794000 ffff8803b7b6fbe0
[88274.416259] Call Trace:
[88274.416267] [<ffffffff816a32a6>] dump_stack+0x4e/0x7a
[88274.416273] [<ffffffff8104f75d>] warn_slowpath_common+0x7d/0xa0
[88274.416278] [<ffffffff8104f7cc>] warn_slowpath_fmt+0x4c/0x50
[88274.416283] [<ffffffff816aa25e>] ? mutex_unlock+0xe/0x10
[88274.416288] [<ffffffff81203fc7>] ? sysfs_get_dirent_ns+0x67/0x80
[88274.416292] [<ffffffff81205293>] sysfs_remove_group+0x53/0xd0
[88274.416298] [<ffffffff813d34f3>] dpm_sysfs_remove+0x43/0x50
[88274.416303] [<ffffffff813c95d5>] device_del+0x45/0x1d0
[88274.416309] [<ffffffff813fa497>] scsi_target_reap_usercontext+0x27/0x40
[88274.416314] [<ffffffff813fa470>] ? scsi_target_destroy+0xc0/0xc0
[88274.416320] [<ffffffff81069e8c>] execute_in_process_context+0x2c/0x90
[88274.416324] [<ffffffff813fb984>] scsi_target_reap+0xc4/0xf0
[88274.416330] [<ffffffff813fdbea>] scsi_device_dev_release_usercontext+0x14a/0x1d0
[88274.416334] [<ffffffff813fdaa0>] ? scsi_device_dev_release+0x20/0x20
[88274.416339] [<ffffffff81069e8c>] execute_in_process_context+0x2c/0x90
[88274.416344] [<ffffffff813fda9c>] scsi_device_dev_release+0x1c/0x20
[88274.416348] [<ffffffff813c88ed>] device_release+0x5d/0xa0
[88274.416354] [<ffffffff812d5335>] kobject_cleanup+0x145/0x180
[88274.416358] [<ffffffff812d5138>] kobject_put+0x48/0x50
[88274.416364] [<ffffffff813c8be7>] put_device+0x17/0x20
[88274.416369] [<ffffffff813effd3>] scsi_device_put+0x43/0x50
[88274.416374] [<ffffffff81407822>] scsi_disk_put+0x32/0x50
[88274.416379] [<ffffffff81407b88>] sd_release+0xb8/0xc0
[88274.416384] [<ffffffff811cc44e>] __blkdev_put+0xbe/0x190
[88274.416389] [<ffffffff811cc4e8>] __blkdev_put+0x158/0x190
[88274.416394] [<ffffffff811ccfce>] blkdev_put+0x12e/0x140
[88274.416399] [<ffffffff81192ccf>] kill_block_super+0x6f/0x80
[88274.416403] [<ffffffff8119255d>] deactivate_locked_super+0x3d/0x60
[88274.416407] [<ffffffff811925d9>] deactivate_super+0x59/0x70
[88274.416413] [<ffffffff811b155f>] mntput_no_expire+0x14f/0x180
[88274.416417] [<ffffffff811b1427>] ? mntput_no_expire+0x17/0x180
[88274.416422] [<ffffffff811b2d85>] SyS_umount+0xc5/0xf0
[88274.416427] [<ffffffff816b3c52>] system_call_fastpath+0x16/0x1b
[88274.416430] ---[ end trace cc7a046285294002 ]---
[88288.150473] usb 1-1.2: new high-speed USB device number 12 using ehci-pci
[88288.245047] usb 1-1.2: New USB device found, idVendor=8564, idProduct=1000
[88288.245053] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[88288.245057] usb 1-1.2: Product: Mass Storage Device
[88288.245060] usb 1-1.2: Manufacturer: JetFlash
[88288.245063] usb 1-1.2: SerialNumber: 7711FF1S05AO20QH
[88288.245579] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[88288.246881] scsi8 : usb-storage 1-1.2:1.0
[88289.428277] scsi 8:0:0:0: Direct-Access JetFlash Transcend 8GB 1100 PQ: 0 ANSI: 4
[88289.429265] sd 8:0:0:0: Attached scsi generic sg7 type 0
[88289.429931] sd 8:0:0:0: [sdg] 15826944 512-byte logical blocks: (8.10 GB/7.54 GiB)
[88289.430682] sd 8:0:0:0: [sdg] Write Protect is off
[88289.430689] sd 8:0:0:0: [sdg] Mode Sense: 43 00 00 00
[88289.431547] sd 8:0:0:0: [sdg] No Caching mode page found
[88289.431557] sd 8:0:0:0: [sdg] Assuming drive cache: write through
[88289.435152] sd 8:0:0:0: [sdg] No Caching mode page found
[88289.435158] sd 8:0:0:0: [sdg] Assuming drive cache: write through
[88289.436031] sdg: sdg1 sdg2
[88289.440008] sd 8:0:0:0: [sdg] No Caching mode page found
[88289.440013] sd 8:0:0:0: [sdg] Assuming drive cache: write through
[88289.440017] sd 8:0:0:0: [sdg] Attached SCSI removable disk
[88289.639259] ISO 9660 Extensions: Microsoft Joliet Level 3
[88289.640361] ISO 9660 Extensions: RRIP_1991A
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 490 bytes --]
reply other threads:[~2014-02-21 14:20 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1392992397.26076.16.camel@intelbox \
--to=imre.deak@intel.com \
--cc=JBottomley@parallels.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.