[Qemu-devel] [PATCH 2/2 v3] vfio: blacklist loading of unstable roms

[Bandan Das <bsd@redhat.com>]

Certain cards such as the Broadcom BCM57810 have rom quirks
that exhibit unstable system behavior duing device assignment. In
the particular case of 57810, rom execution hangs and if a FLR
follows, the device becomes inoperable until a power cycle. This
change blacklists loading of rom for such cards unless the user
specifies a romfile or rombar=1 on the cmd line

Signed-off-by: Bandan Das <bsd@redhat.com>
---
 hw/misc/vfio.c | 60 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 60 insertions(+)

diff --git a/hw/misc/vfio.c b/hw/misc/vfio.c
index 8db182f..df3ceee 100644
--- a/hw/misc/vfio.c
+++ b/hw/misc/vfio.c
@@ -209,6 +209,16 @@ typedef struct VFIOGroup {
     QLIST_ENTRY(VFIOGroup) container_next;
 } VFIOGroup;
 
+typedef struct VFIORomBlacklistEntry {
+    uint16_t vendor_id;
+    uint16_t device_id;
+} VFIORomBlacklistEntry;
+
+static const VFIORomBlacklistEntry romblacklist[] = {
+    /* Broadcom BCM 57810 */
+    { 0x14e4, 0x168e }
+};
+
 #define MSIX_CAP_LENGTH 12
 
 static QLIST_HEAD(, VFIOContainer)
@@ -1197,13 +1207,43 @@ static const MemoryRegionOps vfio_rom_ops = {
     .endianness = DEVICE_LITTLE_ENDIAN,
 };
 
+static bool vfio_blacklist_opt_rom(VFIODevice *vdev)
+{
+    PCIDevice *pdev = &vdev->pdev;
+    uint16_t vendor_id, device_id;
+    int count = 0;
+
+    vendor_id = pci_get_word(pdev->config + PCI_VENDOR_ID);
+    device_id = pci_get_word(pdev->config + PCI_DEVICE_ID);
+
+    while (count < ARRAY_SIZE(romblacklist)) {
+        if (romblacklist[count].vendor_id == vendor_id &&
+            romblacklist[count].device_id == device_id) {
+                return true;
+        }
+        count++;
+    }
+
+    return false;
+}
+
 static void vfio_pci_size_rom(VFIODevice *vdev)
 {
     uint32_t orig, size = cpu_to_le32((uint32_t)PCI_ROM_ADDRESS_MASK);
     off_t offset = vdev->config_offset + PCI_ROM_ADDRESS;
+    DeviceState *dev = DEVICE(vdev);
     char name[32];
 
     if (vdev->pdev.romfile || !vdev->pdev.rom_bar) {
+        /* Since pci handles romfile, just print a message and return */
+        if (vfio_blacklist_opt_rom(vdev) && vdev->pdev.romfile) {
+            error_printf("Warning : Device at %04x:%02x:%02x.%x "
+                         "is known to cause system instability issues during "
+                         "option rom execution. "
+                         "Proceeding anyway since user specified romfile\n",
+                         vdev->host.domain, vdev->host.bus, vdev->host.slot,
+                         vdev->host.function);
+        }
         return;
     }
 
@@ -1227,6 +1267,26 @@ static void vfio_pci_size_rom(VFIODevice *vdev)
         return;
     }
 
+    if (vfio_blacklist_opt_rom(vdev) && vdev->pdev.rom_bar) {
+        if (dev->opts && qemu_opt_get(dev->opts, "rombar")) {
+            error_printf("Warning : Device at %04x:%02x:%02x.%x "
+                         "is known to cause system instability issues during "
+                         "option rom execution. "
+                         "Proceeding anyway since user specified non zero value for "
+                         "rombar\n",
+                         vdev->host.domain, vdev->host.bus, vdev->host.slot,
+                         vdev->host.function);
+        } else {
+            error_printf("Warning : Rom loading for device at "
+                         "%04x:%02x:%02x.%x has been disabled due to "
+                         "system instability issues. "
+                         "Specify rombar=1 or romfile to force\n",
+                         vdev->host.domain, vdev->host.bus, vdev->host.slot,
+                         vdev->host.function);
+            return;
+        }
+    }
+
     DPRINTF("%04x:%02x:%02x.%x ROM size 0x%x\n", vdev->host.domain,
             vdev->host.bus, vdev->host.slot, vdev->host.function, size);
 
-- 
1.8.3.1