All of lore.kernel.org
 help / color / mirror / Atom feed
From: Markus Pargmann <mpa@pengutronix.de>
To: Mark Brown <broonie@kernel.org>
Cc: Fabio Estevam <fabio.estevam@freescale.com>,
	alsa-devel@alsa-project.org, Timur Tabi <timur@tabi.org>,
	kernel@pengutronix.de, Nicolin Chen <Guangyu.Chen@freescale.com>,
	Markus Pargmann <mpa@pengutronix.de>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH 05/15] ASoC: fsl-ssi: Move imx-specific probe to seperate function
Date: Wed, 26 Feb 2014 17:02:08 +0100	[thread overview]
Message-ID: <1393430538-32333-6-git-send-email-mpa@pengutronix.de> (raw)
In-Reply-To: <1393430538-32333-1-git-send-email-mpa@pengutronix.de>

Move imx specific probe code to a seperate function. It reduces the
size of the probe() function and makes the code and error handling
easier to understand.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
---
 sound/soc/fsl/fsl_ssi.c | 183 ++++++++++++++++++++++++++----------------------
 1 file changed, 101 insertions(+), 82 deletions(-)

diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index b3e3758..054813d 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -973,6 +973,98 @@ static void make_lowercase(char *s)
 	}
 }
 
+static int fsl_ssi_imx_probe(struct platform_device *pdev,
+		struct fsl_ssi_private *ssi_private)
+{
+	struct device_node *np = pdev->dev.of_node;
+	u32 dma_events[2], dmas[4];
+	bool shared;
+	int ret;
+
+	ssi_private->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(ssi_private->clk)) {
+		ret = PTR_ERR(ssi_private->clk);
+		dev_err(&pdev->dev, "could not get clock: %d\n", ret);
+		return ret;
+	}
+
+	ret = clk_prepare_enable(ssi_private->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "clk_prepare_enable failed: %d\n", ret);
+		return ret;
+	}
+
+	/* For those SLAVE implementations, we ingore non-baudclk cases
+	 * and, instead, abandon MASTER mode that needs baud clock.
+	 */
+	ssi_private->baudclk = devm_clk_get(&pdev->dev, "baud");
+	if (IS_ERR(ssi_private->baudclk))
+		dev_dbg(&pdev->dev, "could not get baud clock: %ld\n",
+			 PTR_ERR(ssi_private->baudclk));
+	else
+		clk_prepare_enable(ssi_private->baudclk);
+
+	/*
+	 * We have burstsize be "fifo_depth - 2" to match the SSI
+	 * watermark setting in fsl_ssi_startup().
+	 */
+	ssi_private->dma_params_tx.maxburst = ssi_private->fifo_depth - 2;
+	ssi_private->dma_params_rx.maxburst = ssi_private->fifo_depth - 2;
+	ssi_private->dma_params_tx.addr = ssi_private->ssi_phys + CCSR_SSI_STX0;
+	ssi_private->dma_params_rx.addr = ssi_private->ssi_phys + CCSR_SSI_SRX0;
+	ssi_private->dma_params_tx.filter_data = &ssi_private->filter_data_tx;
+	ssi_private->dma_params_rx.filter_data = &ssi_private->filter_data_rx;
+
+	if (!of_property_read_bool(pdev->dev.of_node, "dmas") &&
+			ssi_private->use_dma) {
+		/*
+		 * FIXME: This is a temporary solution until all
+		 * necessary dma drivers support the generic dma
+		 * bindings.
+		 */
+		ret = of_property_read_u32_array(pdev->dev.of_node,
+				"fsl,ssi-dma-events", dma_events, 2);
+		if (ret && ssi_private->use_dma) {
+			dev_err(&pdev->dev, "could not get dma events but fsl-ssi is configured to use DMA\n");
+			goto error_dma_events;
+		}
+	}
+	/* Should this be merge with the above? */
+	if (!of_property_read_u32_array(pdev->dev.of_node, "dmas", dmas, 4)
+			&& dmas[2] == IMX_DMATYPE_SSI_DUAL) {
+		ssi_private->use_dual_fifo = true;
+		/* When using dual fifo mode, we need to keep watermark
+		 * as even numbers due to dma script limitation.
+		 */
+		ssi_private->dma_params_tx.maxburst &= ~0x1;
+		ssi_private->dma_params_rx.maxburst &= ~0x1;
+	}
+
+	shared = of_device_is_compatible(of_get_parent(np), "fsl,spba-bus");
+
+	imx_pcm_dma_params_init_data(&ssi_private->filter_data_tx,
+		dma_events[0], shared ? IMX_DMATYPE_SSI_SP : IMX_DMATYPE_SSI);
+	imx_pcm_dma_params_init_data(&ssi_private->filter_data_rx,
+		dma_events[1], shared ? IMX_DMATYPE_SSI_SP : IMX_DMATYPE_SSI);
+
+	return 0;
+
+error_dma_events:
+	if (!IS_ERR(ssi_private->baudclk))
+		clk_disable_unprepare(ssi_private->baudclk);
+	clk_disable_unprepare(ssi_private->clk);
+
+	return ret;
+}
+
+static void fsl_ssi_imx_clean(struct platform_device *pdev,
+		struct fsl_ssi_private *ssi_private)
+{
+	if (!IS_ERR(ssi_private->baudclk))
+		clk_disable_unprepare(ssi_private->baudclk);
+	clk_disable_unprepare(ssi_private->clk);
+}
+
 static int fsl_ssi_probe(struct platform_device *pdev)
 {
 	struct fsl_ssi_private *ssi_private;
@@ -986,7 +1078,6 @@ static int fsl_ssi_probe(struct platform_device *pdev)
 	struct resource res;
 	void __iomem *iomem;
 	char name[64];
-	bool shared;
 	bool ac97 = false;
 
 	/* SSIs that are not connected on the board should have a
@@ -1108,80 +1199,11 @@ static int fsl_ssi_probe(struct platform_device *pdev)
 
 	if (hw_type == FSL_SSI_MX21 || hw_type == FSL_SSI_MX51 ||
 			hw_type == FSL_SSI_MX35) {
-		u32 dma_events[2], dmas[4];
 		ssi_private->ssi_on_imx = true;
 
-		ssi_private->clk = devm_clk_get(&pdev->dev, NULL);
-		if (IS_ERR(ssi_private->clk)) {
-			ret = PTR_ERR(ssi_private->clk);
-			dev_err(&pdev->dev, "could not get clock: %d\n", ret);
+		ret = fsl_ssi_imx_probe(pdev, ssi_private);
+		if (ret)
 			goto error_irqmap;
-		}
-		ret = clk_prepare_enable(ssi_private->clk);
-		if (ret) {
-			dev_err(&pdev->dev, "clk_prepare_enable failed: %d\n",
-				ret);
-			goto error_irqmap;
-		}
-
-		/* For those SLAVE implementations, we ingore non-baudclk cases
-		 * and, instead, abandon MASTER mode that needs baud clock.
-		 */
-		ssi_private->baudclk = devm_clk_get(&pdev->dev, "baud");
-		if (IS_ERR(ssi_private->baudclk))
-			dev_dbg(&pdev->dev, "could not get baud clock: %ld\n",
-				 PTR_ERR(ssi_private->baudclk));
-		else
-			clk_prepare_enable(ssi_private->baudclk);
-
-		/*
-		 * We have burstsize be "fifo_depth - 2" to match the SSI
-		 * watermark setting in fsl_ssi_startup().
-		 */
-		ssi_private->dma_params_tx.maxburst =
-			ssi_private->fifo_depth - 2;
-		ssi_private->dma_params_rx.maxburst =
-			ssi_private->fifo_depth - 2;
-		ssi_private->dma_params_tx.addr =
-			ssi_private->ssi_phys + CCSR_SSI_STX0;
-		ssi_private->dma_params_rx.addr =
-			ssi_private->ssi_phys + CCSR_SSI_SRX0;
-		ssi_private->dma_params_tx.filter_data =
-			&ssi_private->filter_data_tx;
-		ssi_private->dma_params_rx.filter_data =
-			&ssi_private->filter_data_rx;
-		if (!of_property_read_bool(pdev->dev.of_node, "dmas") &&
-				ssi_private->use_dma) {
-			/*
-			 * FIXME: This is a temporary solution until all
-			 * necessary dma drivers support the generic dma
-			 * bindings.
-			 */
-			ret = of_property_read_u32_array(pdev->dev.of_node,
-					"fsl,ssi-dma-events", dma_events, 2);
-			if (ret && ssi_private->use_dma) {
-				dev_err(&pdev->dev, "could not get dma events but fsl-ssi is configured to use DMA\n");
-				goto error_clk;
-			}
-		}
-		/* Should this be merge with the above? */
-		if (!of_property_read_u32_array(pdev->dev.of_node, "dmas", dmas, 4)
-				&& dmas[2] == IMX_DMATYPE_SSI_DUAL) {
-			ssi_private->use_dual_fifo = true;
-			/* When using dual fifo mode, we need to keep watermark
-			 * as even numbers due to dma script limitation.
-			 */
-			ssi_private->dma_params_tx.maxburst &= ~0x1;
-			ssi_private->dma_params_rx.maxburst &= ~0x1;
-		}
-
-		shared = of_device_is_compatible(of_get_parent(np),
-			    "fsl,spba-bus");
-
-		imx_pcm_dma_params_init_data(&ssi_private->filter_data_tx,
-			dma_events[0], shared ? IMX_DMATYPE_SSI_SP : IMX_DMATYPE_SSI);
-		imx_pcm_dma_params_init_data(&ssi_private->filter_data_rx,
-			dma_events[1], shared ? IMX_DMATYPE_SSI_SP : IMX_DMATYPE_SSI);
 	}
 
 	/*
@@ -1196,7 +1218,7 @@ static int fsl_ssi_probe(struct platform_device *pdev)
 		if (ret < 0) {
 			dev_err(&pdev->dev, "could not claim irq %u\n",
 					ssi_private->irq);
-			goto error_clk;
+			goto error_irq;
 		}
 	}
 
@@ -1289,11 +1311,9 @@ error_dbgfs:
 error_dev:
 	device_remove_file(&pdev->dev, dev_attr);
 
-error_clk:
+error_irq:
 	if (ssi_private->ssi_on_imx) {
-		if (!IS_ERR(ssi_private->baudclk))
-			clk_disable_unprepare(ssi_private->baudclk);
-		clk_disable_unprepare(ssi_private->clk);
+		fsl_ssi_imx_clean(pdev, ssi_private);
 	}
 
 error_irqmap:
@@ -1312,11 +1332,10 @@ static int fsl_ssi_remove(struct platform_device *pdev)
 	if (!ssi_private->new_binding)
 		platform_device_unregister(ssi_private->pdev);
 	snd_soc_unregister_component(&pdev->dev);
-	if (ssi_private->ssi_on_imx) {
-		if (!IS_ERR(ssi_private->baudclk))
-			clk_disable_unprepare(ssi_private->baudclk);
-		clk_disable_unprepare(ssi_private->clk);
-	}
+
+	if (ssi_private->ssi_on_imx)
+		fsl_ssi_imx_clean(pdev, ssi_private);
+
 	if (ssi_private->irq_stats)
 		irq_dispose_mapping(ssi_private->irq);
 
-- 
1.8.5.3

WARNING: multiple messages have this Message-ID
From: mpa@pengutronix.de (Markus Pargmann)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 05/15] ASoC: fsl-ssi: Move imx-specific probe to seperate function
Date: Wed, 26 Feb 2014 17:02:08 +0100	[thread overview]
Message-ID: <1393430538-32333-6-git-send-email-mpa@pengutronix.de> (raw)
In-Reply-To: <1393430538-32333-1-git-send-email-mpa@pengutronix.de>

Move imx specific probe code to a seperate function. It reduces the
size of the probe() function and makes the code and error handling
easier to understand.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
---
 sound/soc/fsl/fsl_ssi.c | 183 ++++++++++++++++++++++++++----------------------
 1 file changed, 101 insertions(+), 82 deletions(-)

diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index b3e3758..054813d 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -973,6 +973,98 @@ static void make_lowercase(char *s)
 	}
 }
 
+static int fsl_ssi_imx_probe(struct platform_device *pdev,
+		struct fsl_ssi_private *ssi_private)
+{
+	struct device_node *np = pdev->dev.of_node;
+	u32 dma_events[2], dmas[4];
+	bool shared;
+	int ret;
+
+	ssi_private->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(ssi_private->clk)) {
+		ret = PTR_ERR(ssi_private->clk);
+		dev_err(&pdev->dev, "could not get clock: %d\n", ret);
+		return ret;
+	}
+
+	ret = clk_prepare_enable(ssi_private->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "clk_prepare_enable failed: %d\n", ret);
+		return ret;
+	}
+
+	/* For those SLAVE implementations, we ingore non-baudclk cases
+	 * and, instead, abandon MASTER mode that needs baud clock.
+	 */
+	ssi_private->baudclk = devm_clk_get(&pdev->dev, "baud");
+	if (IS_ERR(ssi_private->baudclk))
+		dev_dbg(&pdev->dev, "could not get baud clock: %ld\n",
+			 PTR_ERR(ssi_private->baudclk));
+	else
+		clk_prepare_enable(ssi_private->baudclk);
+
+	/*
+	 * We have burstsize be "fifo_depth - 2" to match the SSI
+	 * watermark setting in fsl_ssi_startup().
+	 */
+	ssi_private->dma_params_tx.maxburst = ssi_private->fifo_depth - 2;
+	ssi_private->dma_params_rx.maxburst = ssi_private->fifo_depth - 2;
+	ssi_private->dma_params_tx.addr = ssi_private->ssi_phys + CCSR_SSI_STX0;
+	ssi_private->dma_params_rx.addr = ssi_private->ssi_phys + CCSR_SSI_SRX0;
+	ssi_private->dma_params_tx.filter_data = &ssi_private->filter_data_tx;
+	ssi_private->dma_params_rx.filter_data = &ssi_private->filter_data_rx;
+
+	if (!of_property_read_bool(pdev->dev.of_node, "dmas") &&
+			ssi_private->use_dma) {
+		/*
+		 * FIXME: This is a temporary solution until all
+		 * necessary dma drivers support the generic dma
+		 * bindings.
+		 */
+		ret = of_property_read_u32_array(pdev->dev.of_node,
+				"fsl,ssi-dma-events", dma_events, 2);
+		if (ret && ssi_private->use_dma) {
+			dev_err(&pdev->dev, "could not get dma events but fsl-ssi is configured to use DMA\n");
+			goto error_dma_events;
+		}
+	}
+	/* Should this be merge with the above? */
+	if (!of_property_read_u32_array(pdev->dev.of_node, "dmas", dmas, 4)
+			&& dmas[2] == IMX_DMATYPE_SSI_DUAL) {
+		ssi_private->use_dual_fifo = true;
+		/* When using dual fifo mode, we need to keep watermark
+		 * as even numbers due to dma script limitation.
+		 */
+		ssi_private->dma_params_tx.maxburst &= ~0x1;
+		ssi_private->dma_params_rx.maxburst &= ~0x1;
+	}
+
+	shared = of_device_is_compatible(of_get_parent(np), "fsl,spba-bus");
+
+	imx_pcm_dma_params_init_data(&ssi_private->filter_data_tx,
+		dma_events[0], shared ? IMX_DMATYPE_SSI_SP : IMX_DMATYPE_SSI);
+	imx_pcm_dma_params_init_data(&ssi_private->filter_data_rx,
+		dma_events[1], shared ? IMX_DMATYPE_SSI_SP : IMX_DMATYPE_SSI);
+
+	return 0;
+
+error_dma_events:
+	if (!IS_ERR(ssi_private->baudclk))
+		clk_disable_unprepare(ssi_private->baudclk);
+	clk_disable_unprepare(ssi_private->clk);
+
+	return ret;
+}
+
+static void fsl_ssi_imx_clean(struct platform_device *pdev,
+		struct fsl_ssi_private *ssi_private)
+{
+	if (!IS_ERR(ssi_private->baudclk))
+		clk_disable_unprepare(ssi_private->baudclk);
+	clk_disable_unprepare(ssi_private->clk);
+}
+
 static int fsl_ssi_probe(struct platform_device *pdev)
 {
 	struct fsl_ssi_private *ssi_private;
@@ -986,7 +1078,6 @@ static int fsl_ssi_probe(struct platform_device *pdev)
 	struct resource res;
 	void __iomem *iomem;
 	char name[64];
-	bool shared;
 	bool ac97 = false;
 
 	/* SSIs that are not connected on the board should have a
@@ -1108,80 +1199,11 @@ static int fsl_ssi_probe(struct platform_device *pdev)
 
 	if (hw_type == FSL_SSI_MX21 || hw_type == FSL_SSI_MX51 ||
 			hw_type == FSL_SSI_MX35) {
-		u32 dma_events[2], dmas[4];
 		ssi_private->ssi_on_imx = true;
 
-		ssi_private->clk = devm_clk_get(&pdev->dev, NULL);
-		if (IS_ERR(ssi_private->clk)) {
-			ret = PTR_ERR(ssi_private->clk);
-			dev_err(&pdev->dev, "could not get clock: %d\n", ret);
+		ret = fsl_ssi_imx_probe(pdev, ssi_private);
+		if (ret)
 			goto error_irqmap;
-		}
-		ret = clk_prepare_enable(ssi_private->clk);
-		if (ret) {
-			dev_err(&pdev->dev, "clk_prepare_enable failed: %d\n",
-				ret);
-			goto error_irqmap;
-		}
-
-		/* For those SLAVE implementations, we ingore non-baudclk cases
-		 * and, instead, abandon MASTER mode that needs baud clock.
-		 */
-		ssi_private->baudclk = devm_clk_get(&pdev->dev, "baud");
-		if (IS_ERR(ssi_private->baudclk))
-			dev_dbg(&pdev->dev, "could not get baud clock: %ld\n",
-				 PTR_ERR(ssi_private->baudclk));
-		else
-			clk_prepare_enable(ssi_private->baudclk);
-
-		/*
-		 * We have burstsize be "fifo_depth - 2" to match the SSI
-		 * watermark setting in fsl_ssi_startup().
-		 */
-		ssi_private->dma_params_tx.maxburst =
-			ssi_private->fifo_depth - 2;
-		ssi_private->dma_params_rx.maxburst =
-			ssi_private->fifo_depth - 2;
-		ssi_private->dma_params_tx.addr =
-			ssi_private->ssi_phys + CCSR_SSI_STX0;
-		ssi_private->dma_params_rx.addr =
-			ssi_private->ssi_phys + CCSR_SSI_SRX0;
-		ssi_private->dma_params_tx.filter_data =
-			&ssi_private->filter_data_tx;
-		ssi_private->dma_params_rx.filter_data =
-			&ssi_private->filter_data_rx;
-		if (!of_property_read_bool(pdev->dev.of_node, "dmas") &&
-				ssi_private->use_dma) {
-			/*
-			 * FIXME: This is a temporary solution until all
-			 * necessary dma drivers support the generic dma
-			 * bindings.
-			 */
-			ret = of_property_read_u32_array(pdev->dev.of_node,
-					"fsl,ssi-dma-events", dma_events, 2);
-			if (ret && ssi_private->use_dma) {
-				dev_err(&pdev->dev, "could not get dma events but fsl-ssi is configured to use DMA\n");
-				goto error_clk;
-			}
-		}
-		/* Should this be merge with the above? */
-		if (!of_property_read_u32_array(pdev->dev.of_node, "dmas", dmas, 4)
-				&& dmas[2] == IMX_DMATYPE_SSI_DUAL) {
-			ssi_private->use_dual_fifo = true;
-			/* When using dual fifo mode, we need to keep watermark
-			 * as even numbers due to dma script limitation.
-			 */
-			ssi_private->dma_params_tx.maxburst &= ~0x1;
-			ssi_private->dma_params_rx.maxburst &= ~0x1;
-		}
-
-		shared = of_device_is_compatible(of_get_parent(np),
-			    "fsl,spba-bus");
-
-		imx_pcm_dma_params_init_data(&ssi_private->filter_data_tx,
-			dma_events[0], shared ? IMX_DMATYPE_SSI_SP : IMX_DMATYPE_SSI);
-		imx_pcm_dma_params_init_data(&ssi_private->filter_data_rx,
-			dma_events[1], shared ? IMX_DMATYPE_SSI_SP : IMX_DMATYPE_SSI);
 	}
 
 	/*
@@ -1196,7 +1218,7 @@ static int fsl_ssi_probe(struct platform_device *pdev)
 		if (ret < 0) {
 			dev_err(&pdev->dev, "could not claim irq %u\n",
 					ssi_private->irq);
-			goto error_clk;
+			goto error_irq;
 		}
 	}
 
@@ -1289,11 +1311,9 @@ error_dbgfs:
 error_dev:
 	device_remove_file(&pdev->dev, dev_attr);
 
-error_clk:
+error_irq:
 	if (ssi_private->ssi_on_imx) {
-		if (!IS_ERR(ssi_private->baudclk))
-			clk_disable_unprepare(ssi_private->baudclk);
-		clk_disable_unprepare(ssi_private->clk);
+		fsl_ssi_imx_clean(pdev, ssi_private);
 	}
 
 error_irqmap:
@@ -1312,11 +1332,10 @@ static int fsl_ssi_remove(struct platform_device *pdev)
 	if (!ssi_private->new_binding)
 		platform_device_unregister(ssi_private->pdev);
 	snd_soc_unregister_component(&pdev->dev);
-	if (ssi_private->ssi_on_imx) {
-		if (!IS_ERR(ssi_private->baudclk))
-			clk_disable_unprepare(ssi_private->baudclk);
-		clk_disable_unprepare(ssi_private->clk);
-	}
+
+	if (ssi_private->ssi_on_imx)
+		fsl_ssi_imx_clean(pdev, ssi_private);
+
 	if (ssi_private->irq_stats)
 		irq_dispose_mapping(ssi_private->irq);
 
-- 
1.8.5.3

  parent reply	other threads:[~2014-02-26 16:02 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-02-26 16:02 [PATCH 00/15] ASoC: fsl-ssi: Driver cleanup Markus Pargmann
2014-02-26 16:02 ` Markus Pargmann
2014-02-26 16:02 ` [PATCH 01/15] ASoC: fsl-ssi: Use regmap Markus Pargmann
2014-02-26 16:02   ` Markus Pargmann
2014-02-27  2:08   ` Li.Xiubo
2014-02-27  2:08     ` Li.Xiubo at freescale.com
2014-02-27 15:23     ` Markus Pargmann
2014-02-27 15:23       ` Markus Pargmann
2014-02-27 16:06       ` Timur Tabi
2014-02-27 16:06         ` Timur Tabi
2014-03-05  6:21     ` Mark Brown
2014-03-05  6:21       ` Mark Brown
2014-03-05  7:04       ` Li.Xiubo
2014-03-05  7:04         ` Li.Xiubo at freescale.com
2014-03-05  7:07       ` Li.Xiubo
2014-03-05  7:07         ` Li.Xiubo at freescale.com
2014-02-26 16:02 ` [PATCH 02/15] ASoC: fsl-ssi: Remove fsl_ssi_setup Markus Pargmann
2014-02-26 16:02   ` Markus Pargmann
2014-02-26 16:02 ` [PATCH 03/15] ASoC: fsl-ssi: Move debugging to seperate file Markus Pargmann
2014-02-26 16:02   ` Markus Pargmann
2014-02-26 16:02 ` [PATCH 04/15] ASoC: fsl-ssi: Use dev_name for DAI driver struct Markus Pargmann
2014-02-26 16:02   ` Markus Pargmann
2014-02-26 16:02 ` Markus Pargmann [this message]
2014-02-26 16:02   ` [PATCH 05/15] ASoC: fsl-ssi: Move imx-specific probe to seperate function Markus Pargmann
2014-02-26 16:02 ` [PATCH 06/15] ASoC: fsl-ssi: Remove useless DMA code Markus Pargmann
2014-02-26 16:02   ` Markus Pargmann
2014-02-26 16:02 ` [PATCH 07/15] ASoC: fsl-ssi: baud clock error handling Markus Pargmann
2014-02-26 16:02   ` Markus Pargmann
2014-02-26 16:02 ` [PATCH 08/15] ASoC: fsl-ssi: Cleanup probe function Markus Pargmann
2014-02-26 16:02   ` Markus Pargmann
2014-02-26 16:02 ` [PATCH 09/15] ASoC: fsl-ssi: Remove unnecessary variables from ssi_private Markus Pargmann
2014-02-26 16:02   ` Markus Pargmann
2014-02-26 16:02 ` [PATCH 10/15] ASoC: fsl-ssi: reorder and document fsl_ssi_private Markus Pargmann
2014-02-26 16:02   ` Markus Pargmann
2014-02-26 16:02 ` [PATCH 11/15] ASoC: fsl-ssi: Fix register values when disabling Markus Pargmann
2014-02-26 16:02   ` Markus Pargmann
2014-02-26 16:02 ` [PATCH 12/15] ASoC: fsl-ssi: Only enable baudclk when used Markus Pargmann
2014-02-26 16:02   ` Markus Pargmann
2014-02-26 16:02 ` [PATCH 13/15] ASoC: fsl-ssi: Set default dai-fmts Markus Pargmann
2014-02-26 16:02   ` Markus Pargmann
2014-02-26 16:02 ` [PATCH 14/15] ASoC: fsl-ssi: Transmit enable synchronization Markus Pargmann
2014-02-26 16:02   ` Markus Pargmann
2014-02-26 16:02 ` [PATCH 15/15] ASoC: fsl-ssi: Update binding documentation Markus Pargmann
2014-02-26 16:02   ` Markus Pargmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1393430538-32333-6-git-send-email-mpa@pengutronix.de \
    --to=mpa@pengutronix.de \
    --cc=Guangyu.Chen@freescale.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=fabio.estevam@freescale.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=timur@tabi.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.