All of lore.kernel.org
 help / color / mirror / Atom feed
From: Hayes Wang <hayeswang@realtek.com>
To: <netdev@vger.kernel.org>
Cc: <nic_swsd@realtek.com>, <linux-kernel@vger.kernel.org>,
	<linux-usb@vger.kernel.org>, Hayes Wang <hayeswang@realtek.com>
Subject: [PATCH net-next v2 3/7] r8152: check linking status with netif_carrier_ok
Date: Fri, 6 Feb 2015 11:30:47 +0800	[thread overview]
Message-ID: <1394712342-15778-132-Taiwan-albertk@realtek.com> (raw)
In-Reply-To: <1394712342-15778-129-Taiwan-albertk@realtek.com>

Replace (tp->speed & LINK_STATUS) with netif_carrier_ok().

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
---
 drivers/net/usb/r8152.c | 23 +++++++++--------------
 1 file changed, 9 insertions(+), 14 deletions(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index ff122fa..6667809 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -581,7 +581,6 @@ struct r8152 {
 	u16 ocp_base;
 	u8 *intr_buff;
 	u8 version;
-	u8 speed;
 };
 
 enum rtl_version {
@@ -1157,12 +1156,12 @@ static void intr_callback(struct urb *urb)
 
 	d = urb->transfer_buffer;
 	if (INTR_LINK & __le16_to_cpu(d[0])) {
-		if (!(tp->speed & LINK_STATUS)) {
+		if (!netif_carrier_ok(tp->netdev)) {
 			set_bit(RTL8152_LINK_CHG, &tp->flags);
 			schedule_delayed_work(&tp->schedule, 0);
 		}
 	} else {
-		if (tp->speed & LINK_STATUS) {
+		if (netif_carrier_ok(tp->netdev)) {
 			set_bit(RTL8152_LINK_CHG, &tp->flags);
 			schedule_delayed_work(&tp->schedule, 0);
 		}
@@ -1894,7 +1893,7 @@ static void rtl8152_set_rx_mode(struct net_device *netdev)
 {
 	struct r8152 *tp = netdev_priv(netdev);
 
-	if (tp->speed & LINK_STATUS) {
+	if (netif_carrier_ok(netdev)) {
 		set_bit(RTL8152_SET_RX_MODE, &tp->flags);
 		schedule_delayed_work(&tp->schedule, 0);
 	}
@@ -2918,21 +2917,20 @@ static void set_carrier(struct r8152 *tp)
 	speed = rtl8152_get_speed(tp);
 
 	if (speed & LINK_STATUS) {
-		if (!(tp->speed & LINK_STATUS)) {
+		if (!netif_carrier_ok(netdev)) {
 			tp->rtl_ops.enable(tp);
 			set_bit(RTL8152_SET_RX_MODE, &tp->flags);
 			netif_carrier_on(netdev);
 			rtl_start_rx(tp);
 		}
 	} else {
-		if (tp->speed & LINK_STATUS) {
+		if (netif_carrier_ok(netdev)) {
 			netif_carrier_off(netdev);
 			napi_disable(&tp->napi);
 			tp->rtl_ops.disable(tp);
 			napi_enable(&tp->napi);
 		}
 	}
-	tp->speed = speed;
 }
 
 static void rtl_work_func_t(struct work_struct *work)
@@ -2964,7 +2962,7 @@ static void rtl_work_func_t(struct work_struct *work)
 
 	/* don't schedule napi before linking */
 	if (test_bit(SCHEDULE_NAPI, &tp->flags) &&
-	    (tp->speed & LINK_STATUS)) {
+	    netif_carrier_ok(tp->netdev)) {
 		clear_bit(SCHEDULE_NAPI, &tp->flags);
 		napi_schedule(&tp->napi);
 	}
@@ -2987,8 +2985,7 @@ static int rtl8152_open(struct net_device *netdev)
 	if (res)
 		goto out;
 
-	/* set speed to 0 to avoid autoresume try to submit rx */
-	tp->speed = 0;
+	netif_carrier_off(netdev);
 
 	res = usb_autopm_get_interface(tp->intf);
 	if (res < 0) {
@@ -3005,7 +3002,7 @@ static int rtl8152_open(struct net_device *netdev)
 		cancel_delayed_work_sync(&tp->schedule);
 
 		/* disable the tx/rx, if the workqueue has enabled them. */
-		if (tp->speed & LINK_STATUS)
+		if (netif_carrier_ok(netdev))
 			tp->rtl_ops.disable(tp);
 	}
 
@@ -3014,7 +3011,6 @@ static int rtl8152_open(struct net_device *netdev)
 	rtl8152_set_speed(tp, AUTONEG_ENABLE,
 			  tp->mii.supports_gmii ? SPEED_1000 : SPEED_100,
 			  DUPLEX_FULL);
-	tp->speed = 0;
 	netif_carrier_off(netdev);
 	netif_start_queue(netdev);
 	set_bit(WORK_ENABLE, &tp->flags);
@@ -3340,7 +3336,7 @@ static int rtl8152_resume(struct usb_interface *intf)
 			rtl_runtime_suspend_enable(tp, false);
 			clear_bit(SELECTIVE_SUSPEND, &tp->flags);
 			set_bit(WORK_ENABLE, &tp->flags);
-			if (tp->speed & LINK_STATUS)
+			if (netif_carrier_ok(tp->netdev))
 				rtl_start_rx(tp);
 		} else {
 			tp->rtl_ops.up(tp);
@@ -3348,7 +3344,6 @@ static int rtl8152_resume(struct usb_interface *intf)
 					  tp->mii.supports_gmii ?
 					  SPEED_1000 : SPEED_100,
 					  DUPLEX_FULL);
-			tp->speed = 0;
 			netif_carrier_off(tp->netdev);
 			set_bit(WORK_ENABLE, &tp->flags);
 		}
-- 
2.1.0


  parent reply	other threads:[~2015-02-06  3:31 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-19  7:13 [PATCH net-next 0/7] r8152: adjust the code Hayes Wang
2015-01-19  7:13 ` [PATCH net-next 1/7] r8152: adjust rx_bottom Hayes Wang
2015-01-19  8:03   ` Scott Feldman
2015-01-19 21:13     ` David Miller
2015-01-19 21:13       ` David Miller
2015-01-20  2:48       ` Hayes Wang
2015-01-20  2:52         ` David Miller
2015-01-20  3:24           ` Hayes Wang
2015-01-25  6:43             ` David Miller
2015-01-26  7:14               ` Hayes Wang
2015-01-26  7:14                 ` Hayes Wang
2015-02-02  2:38                 ` Hayes Wang
2015-01-26  9:14         ` Scott Feldman
2015-01-26  9:14           ` Scott Feldman
2015-01-19  7:13 ` [PATCH net-next 2/7] r8152: adjust lpm timer Hayes Wang
2015-01-19  7:13 ` [PATCH net-next 3/7] r8152: check linking status with netif_carrier_ok Hayes Wang
2015-01-19  7:13 ` [PATCH net-next 4/7] r8152: check RTL8152_UNPLUG for rtl8152_close Hayes Wang
2015-01-19  7:13 ` [PATCH net-next 5/7] r8152: adjust the link feed for hw_features Hayes Wang
2015-01-19  7:13 ` [PATCH net-next 6/7] r8152: replace get_protocol with vlan_get_protocol Hayes Wang
2015-01-19  7:13 ` [PATCH net-next 7/7] r8152: use BIT macro Hayes Wang
2015-02-06  3:30 ` [PATCH net-next v2 0/7] r8152: adjust the code Hayes Wang
2015-02-06  3:30   ` [PATCH net-next v2 1/7] r8152: adjust rx_bottom Hayes Wang
2015-02-06  3:30   ` [PATCH net-next v2 2/7] r8152: adjust lpm timer Hayes Wang
2015-02-06  3:30   ` Hayes Wang [this message]
2015-02-06  3:30   ` [PATCH net-next v2 4/7] r8152: check RTL8152_UNPLUG for rtl8152_close Hayes Wang
2015-02-06  3:30   ` [PATCH net-next v2 5/7] r8152: adjust the line feed for hw_features Hayes Wang
2015-02-06  3:30   ` [PATCH net-next v2 6/7] r8152: replace get_protocol with vlan_get_protocol Hayes Wang
2015-02-06  3:30   ` [PATCH net-next v2 7/7] r8152: use BIT macro Hayes Wang
2015-02-08  6:46   ` [PATCH net-next v2 0/7] r8152: adjust the code David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1394712342-15778-132-Taiwan-albertk@realtek.com \
    --to=hayeswang@realtek.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=nic_swsd@realtek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.