All of lore.kernel.org
 help / color / mirror / Atom feed
From: Hayes Wang <hayeswang@realtek.com>
To: <netdev@vger.kernel.org>
Cc: <nic_swsd@realtek.com>, <linux-kernel@vger.kernel.org>,
	Hayes Wang <hayeswang@realtek.com>,
	Francois Romieu <romieu@fr.zoreil.com>
Subject: [PATCH net] r8169: adjust __rtl8169_set_features
Date: Tue, 16 Sep 2014 11:40:47 +0800	[thread overview]
Message-ID: <1394712342-15778-42-Taiwan-albertk@realtek.com> (raw)
In-Reply-To: <20140916000321.GA19564@electric-eye.fr.zoreil.com>

Remove the "changed" test in __rtl8169_set_features(). Instead, do
simple test in rtl8169_set_features().

Set the RxChkSum and RxVlan through __rtl8169_set_features() in
rtl_open().

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
---
 drivers/net/ethernet/realtek/r8169.c | 74 +++++++++++++++++-------------------
 1 file changed, 34 insertions(+), 40 deletions(-)

diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index 7a7860a..ef2cee5 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -1783,33 +1783,31 @@ static void __rtl8169_set_features(struct net_device *dev,
 				   netdev_features_t features)
 {
 	struct rtl8169_private *tp = netdev_priv(dev);
-	netdev_features_t changed = features ^ dev->features;
 	void __iomem *ioaddr = tp->mmio_addr;
+	u32 rx_config;
 
-	if (!(changed & (NETIF_F_RXALL | NETIF_F_RXCSUM |
-			 NETIF_F_HW_VLAN_CTAG_RX)))
-		return;
+	rx_config = RTL_R32(RxConfig);
+	if (features & NETIF_F_RXALL)
+		rx_config |= (AcceptErr | AcceptRunt);
+	else
+		rx_config &= ~(AcceptErr | AcceptRunt);
 
-	if (changed & (NETIF_F_RXCSUM | NETIF_F_HW_VLAN_CTAG_RX)) {
-		if (features & NETIF_F_RXCSUM)
-			tp->cp_cmd |= RxChkSum;
-		else
-			tp->cp_cmd &= ~RxChkSum;
+	RTL_W32(RxConfig, rx_config);
 
-		if (features & NETIF_F_HW_VLAN_CTAG_RX)
-			tp->cp_cmd |= RxVlan;
-		else
-			tp->cp_cmd &= ~RxVlan;
+	if (features & NETIF_F_RXCSUM)
+		tp->cp_cmd |= RxChkSum;
+	else
+		tp->cp_cmd &= ~RxChkSum;
 
-		RTL_W16(CPlusCmd, tp->cp_cmd);
-		RTL_R16(CPlusCmd);
-	}
-	if (changed & NETIF_F_RXALL) {
-		int tmp = (RTL_R32(RxConfig) & ~(AcceptErr | AcceptRunt));
-		if (features & NETIF_F_RXALL)
-			tmp |= (AcceptErr | AcceptRunt);
-		RTL_W32(RxConfig, tmp);
-	}
+	if (features & NETIF_F_HW_VLAN_CTAG_RX)
+		tp->cp_cmd |= RxVlan;
+	else
+		tp->cp_cmd &= ~RxVlan;
+
+	tp->cp_cmd |= RTL_R16(CPlusCmd) & ~(RxVlan | RxChkSum);
+
+	RTL_W16(CPlusCmd, tp->cp_cmd);
+	RTL_R16(CPlusCmd);
 }
 
 static int rtl8169_set_features(struct net_device *dev,
@@ -1817,8 +1815,11 @@ static int rtl8169_set_features(struct net_device *dev,
 {
 	struct rtl8169_private *tp = netdev_priv(dev);
 
+	features &= NETIF_F_RXALL | NETIF_F_RXCSUM | NETIF_F_HW_VLAN_CTAG_RX;
+
 	rtl_lock_work(tp);
-	__rtl8169_set_features(dev, features);
+	if (features ^ dev->features);
+		__rtl8169_set_features(dev, features);
 	rtl_unlock_work(tp);
 
 	return 0;
@@ -6707,12 +6708,7 @@ static int rtl_open(struct net_device *dev)
 
 	rtl8169_init_phy(dev, tp);
 
-	if (dev->features & NETIF_F_HW_VLAN_CTAG_RX)
-		tp->cp_cmd |= RxVlan;
-	else
-		tp->cp_cmd &= ~RxVlan;
-
-	RTL_W16(CPlusCmd, tp->cp_cmd);
+	__rtl8169_set_features(dev, dev->features);
 
 	rtl_pll_power_up(tp);
 
@@ -7123,8 +7119,7 @@ static void rtl_hw_initialize(struct rtl8169_private *tp)
 	}
 }
 
-static int
-rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
+static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	const struct rtl_cfg_info *cfg = rtl_cfg_infos + ent->driver_data;
 	const unsigned int region = cfg->region;
@@ -7199,7 +7194,7 @@ rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto err_out_mwi_2;
 	}
 
-	tp->cp_cmd = RxChkSum;
+	tp->cp_cmd = 0;
 
 	if ((sizeof(dma_addr_t) > 4) &&
 	    !pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) && use_dac) {
@@ -7240,13 +7235,6 @@ rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	pci_set_master(pdev);
 
-	/*
-	 * Pretend we are using VLANs; This bypasses a nasty bug where
-	 * Interrupts stop flowing on high load on 8110SCd controllers.
-	 */
-	if (tp->mac_version == RTL_GIGA_MAC_VER_05)
-		tp->cp_cmd |= RxVlan;
-
 	rtl_init_mdio_ops(tp);
 	rtl_init_pll_power_ops(tp);
 	rtl_init_jumbo_ops(tp);
@@ -7307,8 +7295,14 @@ rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	dev->vlan_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO |
 		NETIF_F_HIGHDMA;
 
+	tp->cp_cmd |= RxChkSum | RxVlan;
+
+	/*
+	 * Pretend we are using VLANs; This bypasses a nasty bug where
+	 * Interrupts stop flowing on high load on 8110SCd controllers.
+	 */
 	if (tp->mac_version == RTL_GIGA_MAC_VER_05)
-		/* 8110SCd requires hardware Rx VLAN - disallow toggling */
+		/* Disallow toggling */
 		dev->hw_features &= ~NETIF_F_HW_VLAN_CTAG_RX;
 
 	if (tp->txd_version == RTL_TD_0)
-- 
1.9.3


  parent reply	other threads:[~2014-09-16  3:41 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-12  3:35 [PATCH net 0/2] r8169: fix rx vlan Hayes Wang
2014-09-12  3:35 ` [PATCH net 1/2] r8169: fix the default setting of " Hayes Wang
2014-09-12 19:40   ` Francois Romieu
2014-09-15  3:22     ` Hayes Wang
2014-09-16  0:03       ` Francois Romieu
2014-09-16  3:23         ` Hayes Wang
2014-09-16  3:40         ` Hayes Wang [this message]
2014-09-16 19:56           ` [PATCH net] r8169: adjust __rtl8169_set_features David Miller
2014-09-12  3:35 ` [PATCH net 2/2] r8169: fix setting rx vlan Hayes Wang
2014-09-13 20:53 ` [PATCH net 0/2] r8169: fix " David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1394712342-15778-42-Taiwan-albertk@realtek.com \
    --to=hayeswang@realtek.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=nic_swsd@realtek.com \
    --cc=romieu@fr.zoreil.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.