From: Masahiro Yamada <yamada.m@jp.panasonic.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [RFC PATCH 05/17] include: define CONFIG_SPL and CONFIG_TPL as 1
Date: Mon, 17 Mar 2014 17:53:00 +0900 [thread overview]
Message-ID: <1395046392-1212-6-git-send-email-yamada.m@jp.panasonic.com> (raw)
In-Reply-To: <1395046392-1212-1-git-send-email-yamada.m@jp.panasonic.com>
We are about to switch to Kconfig in the upcoming commit.
But there are something to get done beforehand.
In Kconfig, include/generated/autoconf.h defines boolean
CONFIG macros as 1.
CONFIG_SPL and CONFIG_TPL, if defined, must be defined as 1.
Otherwise, when switching to Kconfig, the build log
would be sprinkled with warning messages like this:
warning: "CONFIG_SPL" redefined [enabled by default]
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
---
doc/README.SPL | 2 +-
include/configs/BSC9131RDB.h | 2 +-
include/configs/BSC9132QDS.h | 2 +-
include/configs/C29XPCIE.h | 4 ++--
include/configs/MPC8313ERDB.h | 2 +-
include/configs/P1010RDB.h | 8 ++++----
include/configs/P1022DS.h | 8 ++++----
include/configs/a3m071.h | 2 +-
include/configs/am335x_igep0033.h | 2 +-
include/configs/am3517_crane.h | 2 +-
include/configs/am3517_evm.h | 2 +-
include/configs/apf27.h | 2 +-
include/configs/arndale.h | 2 +-
include/configs/bur_am335x_common.h | 2 +-
include/configs/cam_enc_4xx.h | 2 +-
include/configs/cm_t35.h | 2 +-
include/configs/da850evm.h | 2 +-
include/configs/devkit8000.h | 2 +-
include/configs/exynos5-dt.h | 2 +-
include/configs/hawkboard.h | 2 +-
include/configs/ipam390.h | 2 +-
include/configs/lwmon5.h | 2 +-
include/configs/m53evk.h | 2 +-
include/configs/mcx.h | 2 +-
include/configs/microblaze-generic.h | 2 +-
include/configs/mx31pdk.h | 2 +-
include/configs/mxs.h | 2 +-
include/configs/omap3_beagle.h | 2 +-
include/configs/omap3_evm_common.h | 2 +-
include/configs/omap3_overo.h | 2 +-
include/configs/origen.h | 2 +-
include/configs/p1_p2_rdb_pc.h | 8 ++++----
include/configs/palmtreo680.h | 2 +-
include/configs/pcm051.h | 2 +-
include/configs/sama5d3xek.h | 2 +-
include/configs/siemens-am33x-common.h | 2 +-
include/configs/smdkv310.h | 2 +-
include/configs/socfpga_cyclone5.h | 2 +-
include/configs/tam3517-common.h | 2 +-
include/configs/tao3530.h | 2 +-
include/configs/tegra-common.h | 2 +-
include/configs/ti814x_evm.h | 2 +-
include/configs/ti816x_evm.h | 2 +-
include/configs/ti_armv7_common.h | 2 +-
include/configs/tricorder.h | 2 +-
include/configs/tx25.h | 2 +-
include/configs/vpac270.h | 2 +-
include/configs/woodburn_sd.h | 2 +-
include/configs/x600.h | 2 +-
include/configs/zynq-common.h | 2 +-
50 files changed, 60 insertions(+), 60 deletions(-)
diff --git a/doc/README.SPL b/doc/README.SPL
index 57a39a4..2b4b0b8 100644
--- a/doc/README.SPL
+++ b/doc/README.SPL
@@ -40,7 +40,7 @@ COBJS-$(CONFIG_SPL_BUILD) += foo.o
The building of SPL images can be with:
-#define CONFIG_SPL
+#define CONFIG_SPL 1
Because SPL images normally have a different text base, one has to be
configured by defining CONFIG_SPL_TEXT_BASE. The linker script has to be
diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h
index a163e3d..4827694 100644
--- a/include/configs/BSC9131RDB.h
+++ b/include/configs/BSC9131RDB.h
@@ -25,7 +25,7 @@
#endif
#ifdef CONFIG_NAND
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_INIT_MINIMAL
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_NAND_SUPPORT
diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h
index 052a0f1..60bb628 100644
--- a/include/configs/BSC9132QDS.h
+++ b/include/configs/BSC9132QDS.h
@@ -34,7 +34,7 @@
#endif
#ifdef CONFIG_NAND
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_INIT_MINIMAL
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_NAND_SUPPORT
diff --git a/include/configs/C29XPCIE.h b/include/configs/C29XPCIE.h
index 92913c8..825b711 100644
--- a/include/configs/C29XPCIE.h
+++ b/include/configs/C29XPCIE.h
@@ -24,8 +24,8 @@
#endif
#ifdef CONFIG_NAND
-#define CONFIG_SPL
-#define CONFIG_TPL
+#define CONFIG_SPL 1
+#define CONFIG_TPL 1
#ifdef CONFIG_TPL_BUILD
#define CONFIG_SPL_NAND_BOOT
#define CONFIG_SPL_FLUSH_IMAGE
diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
index 69b2cb1..7f5aa59 100644
--- a/include/configs/MPC8313ERDB.h
+++ b/include/configs/MPC8313ERDB.h
@@ -19,7 +19,7 @@
#define CONFIG_MPC8313ERDB 1
#ifdef CONFIG_NAND
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_INIT_MINIMAL
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_NAND_SUPPORT
diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
index eabfc85..49b1cec 100644
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@@ -21,7 +21,7 @@
#define CONFIG_NAND_FSL_IFC
#ifdef CONFIG_SDCARD
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
#define CONFIG_SPL_ENV_SUPPORT
@@ -56,7 +56,7 @@
#define CONFIG_SYS_TEXT_BASE 0x11000000
#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc
#else
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
#define CONFIG_SPL_ENV_SUPPORT
@@ -88,7 +88,7 @@
#endif
#ifdef CONFIG_NAND
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#ifdef CONFIG_SECURE_BOOT
#define CONFIG_SPL_INIT_MINIMAL
#define CONFIG_SPL_SERIAL_SUPPORT
@@ -108,7 +108,7 @@
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0
#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
#else
-#define CONFIG_TPL
+#define CONFIG_TPL 1
#ifdef CONFIG_TPL_BUILD
#define CONFIG_SPL_NAND_BOOT
#define CONFIG_SPL_FLUSH_IMAGE
diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h
index 139d4fe..e067f22 100644
--- a/include/configs/P1022DS.h
+++ b/include/configs/P1022DS.h
@@ -16,7 +16,7 @@
#endif
#ifdef CONFIG_SDCARD
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
#define CONFIG_SPL_ENV_SUPPORT
#define CONFIG_SPL_SERIAL_SUPPORT
@@ -45,7 +45,7 @@
#endif
#ifdef CONFIG_SPIFLASH
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
#define CONFIG_SPL_ENV_SUPPORT
#define CONFIG_SPL_SERIAL_SUPPORT
@@ -79,8 +79,8 @@
#define CONFIG_SYS_NAND_MAX_OOBFREE 5
#ifdef CONFIG_NAND
-#define CONFIG_SPL
-#define CONFIG_TPL
+#define CONFIG_SPL 1
+#define CONFIG_TPL 1
#ifdef CONFIG_TPL_BUILD
#define CONFIG_SPL_NAND_BOOT
#define CONFIG_SPL_FLUSH_IMAGE
diff --git a/include/configs/a3m071.h b/include/configs/a3m071.h
index 1e65cd1..b05923f 100644
--- a/include/configs/a3m071.h
+++ b/include/configs/a3m071.h
@@ -411,7 +411,7 @@
/*
* SPL related defines
*/
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_NOR_SUPPORT
diff --git a/include/configs/am335x_igep0033.h b/include/configs/am335x_igep0033.h
index c17327f..5023f9d 100644
--- a/include/configs/am335x_igep0033.h
+++ b/include/configs/am335x_igep0033.h
@@ -211,7 +211,7 @@
#undef CONFIG_USE_IRQ
/* Defines for SPL */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
/*
* Place the image at the start of the ROM defined image space.
diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h
index 4407b45..842c30e 100644
--- a/include/configs/am3517_crane.h
+++ b/include/configs/am3517_crane.h
@@ -298,7 +298,7 @@
GENERATED_GBL_DATA_SIZE)
/* Defines for SPL */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_NAND_SIMPLE
diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index 0102ff5..e4eee38 100644
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -307,7 +307,7 @@
GENERATED_GBL_DATA_SIZE)
/* Defines for SPL */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_NAND_SIMPLE
diff --git a/include/configs/apf27.h b/include/configs/apf27.h
index b10c48c..a97f213 100644
--- a/include/configs/apf27.h
+++ b/include/configs/apf27.h
@@ -37,7 +37,7 @@
/*
* SPL
*/
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds"
#define CONFIG_SPL_MAX_SIZE 2048
diff --git a/include/configs/arndale.h b/include/configs/arndale.h
index 515facf..d7c4ffc 100644
--- a/include/configs/arndale.h
+++ b/include/configs/arndale.h
@@ -121,7 +121,7 @@
/* MMC SPL */
#define CONFIG_EXYNOS_SPL
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define COPY_BL2_FNPTR_ADDR 0x02020030
#define CONFIG_SPL_LIBCOMMON_SUPPORT
diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h
index 7bbe596..af4a2d4 100644
--- a/include/configs/bur_am335x_common.h
+++ b/include/configs/bur_am335x_common.h
@@ -162,7 +162,7 @@
* under common/spl/. Given our generally common memory map, we set a
* number of related defaults and sizes here.
*/
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
/*
* Place the image at the start of the ROM defined image space.
diff --git a/include/configs/cam_enc_4xx.h b/include/configs/cam_enc_4xx.h
index 8182a75..d6e6c19 100644
--- a/include/configs/cam_enc_4xx.h
+++ b/include/configs/cam_enc_4xx.h
@@ -199,7 +199,7 @@
#define CONFIG_SYS_NAND_BLOCK_SIZE 0x20000
/* Defines for SPL */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index cfc4f9b..166472d 100644
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -320,7 +320,7 @@
#define CONFIG_OMAP3_SPI
/* Defines for SPL */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_NAND_SIMPLE
diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
index 509fe20..5ddb0f7 100644
--- a/include/configs/da850evm.h
+++ b/include/configs/da850evm.h
@@ -368,7 +368,7 @@
#ifndef CONFIG_DIRECT_NOR_BOOT
/* defines for SPL */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE - \
diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
index 16a00eb..4a4f759 100644
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -283,7 +283,7 @@
#define CONFIG_SYS_SRAM_SIZE 0x10000
/* Defines for SPL */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_NAND_SIMPLE
diff --git a/include/configs/exynos5-dt.h b/include/configs/exynos5-dt.h
index 414db42..338633a 100644
--- a/include/configs/exynos5-dt.h
+++ b/include/configs/exynos5-dt.h
@@ -136,7 +136,7 @@
#define CONFIG_TPM_TIS_I2C_SLAVE_ADDR 0x20
/* MMC SPL */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define COPY_BL2_FNPTR_ADDR 0x02020030
#define CONFIG_SPL_LIBCOMMON_SUPPORT
diff --git a/include/configs/hawkboard.h b/include/configs/hawkboard.h
index 73e1624..8144883 100644
--- a/include/configs/hawkboard.h
+++ b/include/configs/hawkboard.h
@@ -46,7 +46,7 @@
#endif
/* Spl */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_NAND_SUPPORT
diff --git a/include/configs/ipam390.h b/include/configs/ipam390.h
index fdd5680..6ad8822 100644
--- a/include/configs/ipam390.h
+++ b/include/configs/ipam390.h
@@ -298,7 +298,7 @@
"-(rootfs)"
/* defines for SPL */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE - \
diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
index 07ddfc4..22cbdaa 100644
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@ -665,7 +665,7 @@
* SPL related defines
*/
#ifdef CONFIG_LCD4_LWMON5
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_NOR_SUPPORT
diff --git a/include/configs/m53evk.h b/include/configs/m53evk.h
index 16546c2..5d84b3f 100644
--- a/include/configs/m53evk.h
+++ b/include/configs/m53evk.h
@@ -236,7 +236,7 @@
/*
* NAND SPL
*/
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_TARGET "u-boot-with-nand-spl.imx"
#define CONFIG_SPL_BOARD_INIT
diff --git a/include/configs/mcx.h b/include/configs/mcx.h
index 47244c0..9823c04 100644
--- a/include/configs/mcx.h
+++ b/include/configs/mcx.h
@@ -348,7 +348,7 @@
GENERATED_GBL_DATA_SIZE)
/* Defines for SPL */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_NAND_SIMPLE
diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h
index 486787e..8cbb0ff 100644
--- a/include/configs/microblaze-generic.h
+++ b/include/configs/microblaze-generic.h
@@ -448,7 +448,7 @@
#endif
/* SPL part */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_CMD_SPL
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_LIBCOMMON_SUPPORT
diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h
index f223788..85d438f 100644
--- a/include/configs/mx31pdk.h
+++ b/include/configs/mx31pdk.h
@@ -29,7 +29,7 @@
#define CONFIG_MACH_TYPE MACH_TYPE_MX31_3DS
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds"
#define CONFIG_SPL_MAX_SIZE 2048
diff --git a/include/configs/mxs.h b/include/configs/mxs.h
index 55ecef9..b44f38e 100644
--- a/include/configs/mxs.h
+++ b/include/configs/mxs.h
@@ -49,7 +49,7 @@
#define CONFIG_ARCH_MISC_INIT
/* SPL */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_NO_CPU_SUPPORT_CODE
#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/mxs"
#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds"
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 0b57421..9bb7d1e 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -389,7 +389,7 @@
#define CONFIG_SYS_CACHELINE_SIZE 64
/* Defines for SPL */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_NAND_SIMPLE
#define CONFIG_SPL_TEXT_BASE 0x40200800
diff --git a/include/configs/omap3_evm_common.h b/include/configs/omap3_evm_common.h
index 7f3424b..84ba3de 100644
--- a/include/configs/omap3_evm_common.h
+++ b/include/configs/omap3_evm_common.h
@@ -260,7 +260,7 @@
#define CONFIG_SYS_CACHELINE_SIZE 64
/* Defines for SPL */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_TEXT_BASE 0x40200800
#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */
diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index 007e27f..8786213 100644
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -277,7 +277,7 @@
#define CONFIG_SYS_CACHELINE_SIZE 64
/* Defines for SPL */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_NAND_SIMPLE
#define CONFIG_SPL_TEXT_BASE 0x40200800
diff --git a/include/configs/origen.h b/include/configs/origen.h
index f46b833..dc952c9 100644
--- a/include/configs/origen.h
+++ b/include/configs/origen.h
@@ -78,7 +78,7 @@
#define CONFIG_BOOTDELAY 3
#define CONFIG_ZERO_BOOTDELAY_CHECK
/* MMC SPL */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define COPY_BL2_FNPTR_ADDR 0x02020030
#define CONFIG_SPL_TEXT_BASE 0x02021410
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index 07b6179..e3b6b0f 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -145,7 +145,7 @@
#endif
#ifdef CONFIG_SDCARD
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
#define CONFIG_SPL_ENV_SUPPORT
#define CONFIG_SPL_SERIAL_SUPPORT
@@ -174,7 +174,7 @@
#endif
#ifdef CONFIG_SPIFLASH
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
#define CONFIG_SPL_ENV_SUPPORT
#define CONFIG_SPL_SERIAL_SUPPORT
@@ -204,8 +204,8 @@
#endif
#ifdef CONFIG_NAND
-#define CONFIG_SPL
-#define CONFIG_TPL
+#define CONFIG_SPL 1
+#define CONFIG_TPL 1
#ifdef CONFIG_TPL_BUILD
#define CONFIG_SPL_NAND_BOOT
#define CONFIG_SPL_FLUSH_IMAGE
diff --git a/include/configs/palmtreo680.h b/include/configs/palmtreo680.h
index 3662663..31e89d9 100644
--- a/include/configs/palmtreo680.h
+++ b/include/configs/palmtreo680.h
@@ -205,7 +205,7 @@
/*
* SPL
*/
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_TEXT_BASE 0xa1700000 /* IPL loads SPL here */
#define CONFIG_SPL_STACK 0x5c040000 /* end of internal SRAM */
#define CONFIG_SPL_NAND_SUPPORT /* build libnand for spl */
diff --git a/include/configs/pcm051.h b/include/configs/pcm051.h
index 9af3efd..207a290 100644
--- a/include/configs/pcm051.h
+++ b/include/configs/pcm051.h
@@ -197,7 +197,7 @@
#define CONFIG_ENV_IS_NOWHERE
/* Defines for SPL */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_BOARD_INIT
/*
diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h
index 516be85..4b6c2ed 100644
--- a/include/configs/sama5d3xek.h
+++ b/include/configs/sama5d3xek.h
@@ -243,7 +243,7 @@
#define CONFIG_SYS_MALLOC_LEN (1024 * 1024)
/* SPL */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_TEXT_BASE 0x300000
#define CONFIG_SPL_MAX_SIZE 0x10000
diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h
index 98b6e72..9342b51 100644
--- a/include/configs/siemens-am33x-common.h
+++ b/include/configs/siemens-am33x-common.h
@@ -137,7 +137,7 @@
#define CONFIG_SYS_I2C_OMAP24XX
/* Defines for SPL */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_TEXT_BASE 0x402F0400
#define CONFIG_SPL_MAX_SIZE (101 * 1024)
diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h
index 1388f49..30bad20 100644
--- a/include/configs/smdkv310.h
+++ b/include/configs/smdkv310.h
@@ -75,7 +75,7 @@
#define CONFIG_ZERO_BOOTDELAY_CHECK
/* MMC SPL */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SKIP_LOWLEVEL_INIT
#define COPY_BL2_FNPTR_ADDR 0x00002488
diff --git a/include/configs/socfpga_cyclone5.h b/include/configs/socfpga_cyclone5.h
index 608578a..50fd45c 100644
--- a/include/configs/socfpga_cyclone5.h
+++ b/include/configs/socfpga_cyclone5.h
@@ -209,7 +209,7 @@
*/
/* Enable building of SPL globally */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
/* TEXT_BASE for linking the SPL binary */
diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h
index 3522c1a..88dac44 100644
--- a/include/configs/tam3517-common.h
+++ b/include/configs/tam3517-common.h
@@ -218,7 +218,7 @@
#define CONFIG_NET_RETRY_COUNT 10
/* Defines for SPL */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_CONSOLE
diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h
index 9c04c23..f601cca 100644
--- a/include/configs/tao3530.h
+++ b/include/configs/tao3530.h
@@ -305,7 +305,7 @@
#define CONGIG_CMD_STORAGE
/* Defines for SPL */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_NAND_SIMPLE
diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h
index ae786cf..b71db60 100644
--- a/include/configs/tegra-common.h
+++ b/include/configs/tegra-common.h
@@ -121,7 +121,7 @@
#define CONFIG_CMD_ENTERRCM
/* Defines for SPL */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_RAM_DEVICE
#define CONFIG_SPL_BOARD_INIT
diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h
index b51400c..bd25ec8 100644
--- a/include/configs/ti814x_evm.h
+++ b/include/configs/ti814x_evm.h
@@ -168,7 +168,7 @@
#define CONFIG_ENV_IS_NOWHERE
/* Defines for SPL */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_TEXT_BASE 0x40300000
#define CONFIG_SPL_MAX_SIZE ((128 - 18) * 1024)
diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h
index b8c0d54..ea0c4fd 100644
--- a/include/configs/ti816x_evm.h
+++ b/include/configs/ti816x_evm.h
@@ -134,7 +134,7 @@
/* SPL */
/* Defines for SPL */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_TEXT_BASE 0x40400000
#define CONFIG_SPL_MAX_SIZE ((128 - 18) * 1024)
diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h
index 69d69a5..1f5522a 100644
--- a/include/configs/ti_armv7_common.h
+++ b/include/configs/ti_armv7_common.h
@@ -174,7 +174,7 @@
* number of related defaults and sizes here.
*/
#ifndef CONFIG_NOR_BOOT
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_OS_BOOT
diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h
index 62f97d2..0b08f09 100644
--- a/include/configs/tricorder.h
+++ b/include/configs/tricorder.h
@@ -328,7 +328,7 @@
#define CONFIG_SYS_SRAM_SIZE 0x10000
/* Defines for SPL */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_NAND_SIMPLE
diff --git a/include/configs/tx25.h b/include/configs/tx25.h
index 5ac6e64..d362087 100644
--- a/include/configs/tx25.h
+++ b/include/configs/tx25.h
@@ -21,7 +21,7 @@
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* 256 kB for U-Boot */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds"
#define CONFIG_SPL_MAX_SIZE 2048
diff --git a/include/configs/vpac270.h b/include/configs/vpac270.h
index c6d4763..e53d3c4 100644
--- a/include/configs/vpac270.h
+++ b/include/configs/vpac270.h
@@ -17,7 +17,7 @@
#define CONFIG_SYS_TEXT_BASE 0xa0000000
#ifdef CONFIG_ONENAND
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_ONENAND_SUPPORT
#define CONFIG_SPL_ONENAND_LOAD_ADDR 0x2000
#define CONFIG_SPL_ONENAND_LOAD_SIZE \
diff --git a/include/configs/woodburn_sd.h b/include/configs/woodburn_sd.h
index 10e1d17..0450c16 100644
--- a/include/configs/woodburn_sd.h
+++ b/include/configs/woodburn_sd.h
@@ -22,7 +22,7 @@
/*
* SPL
*/
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm1136/u-boot-spl.lds"
#define CONFIG_SPL_LIBCOMMON_SUPPORT
diff --git a/include/configs/x600.h b/include/configs/x600.h
index 7405419..32ad621 100644
--- a/include/configs/x600.h
+++ b/include/configs/x600.h
@@ -273,7 +273,7 @@
/*
* SPL related defines
*/
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_TEXT_BASE 0xd2800b00
#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/spear"
#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds"
diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index 731e69b..27601ec 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -229,7 +229,7 @@
#define CONFIG_CMD_TFTPPUT
/* SPL part */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_CMD_SPL
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_LIBCOMMON_SUPPORT
--
1.8.3.2
next prev parent reply other threads:[~2014-03-17 8:53 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-17 8:52 [U-Boot] [RFC PATCH 0/17] Version 0 of Kconfig for U-Boot Masahiro Yamada
2014-03-17 8:52 ` [U-Boot] [RFC PATCH 01/17] kconfig: import Kconfig files from Linux v3.13 tag Masahiro Yamada
2014-03-17 8:52 ` [U-Boot] [RFC PATCH 02/17] kconfig: add basic Kconfig files Masahiro Yamada
2014-03-17 8:52 ` [U-Boot] [RFC PATCH 03/17] Do not apply: tools: add gendefconfigs Masahiro Yamada
2014-03-17 8:52 ` [U-Boot] [RFC PATCH 04/17] kconfig: add defconfig files for all boards Masahiro Yamada
2014-03-18 3:08 ` Stephen Warren
2014-03-19 3:16 ` Masahiro Yamada
2014-03-19 3:39 ` Stephen Warren
2014-03-19 4:50 ` Masahiro Yamada
2014-03-19 9:56 ` Wolfgang Denk
2014-03-19 10:51 ` Masahiro Yamada
2014-03-19 12:37 ` Daniel Schwierzeck
2014-03-19 14:20 ` Wolfgang Denk
2014-03-19 16:06 ` Tom Rini
2014-03-19 23:48 ` Masahiro Yamada
2014-03-21 13:41 ` Tom Rini
2014-03-20 0:11 ` Masahiro Yamada
2014-03-20 13:17 ` Daniel Schwierzeck
2014-03-21 18:05 ` Tom Rini
2014-03-22 17:14 ` Daniel Schwierzeck
2014-03-24 6:35 ` Masahiro Yamada
2014-03-24 20:35 ` Daniel Schwierzeck
2014-03-28 2:25 ` Masahiro Yamada
2014-03-28 20:35 ` Daniel Schwierzeck
2014-03-31 8:56 ` Masahiro Yamada
2014-03-19 19:58 ` Stephen Warren
2014-03-19 12:54 ` Tom Rini
2014-03-19 22:58 ` Masahiro Yamada
2014-03-17 8:53 ` Masahiro Yamada [this message]
2014-03-17 8:53 ` [U-Boot] [RFC PATCH 06/17] m68k: define processor family CONFIGs as 1 Masahiro Yamada
2014-03-17 8:53 ` [U-Boot] [RFC PATCH 07/17] kconfig: switch over to Kconfig Masahiro Yamada
2014-03-17 8:53 ` [U-Boot] [RFC PATCH 08/17] MAKEALL: adjust for Kconfig Masahiro Yamada
2014-03-17 8:53 ` [U-Boot] [RFC PATCH 09/17] buildman: " Masahiro Yamada
2014-03-17 8:53 ` [U-Boot] [RFC PATCH 10/17] kconfig: delete redundant CONFIG_${ARCH} definition Masahiro Yamada
2014-03-17 8:53 ` [U-Boot] [RFC PATCH 11/17] sh: remove redundant CPU family definition Masahiro Yamada
2014-03-17 8:53 ` [U-Boot] [RFC PATCH 12/17] sparc: " Masahiro Yamada
2014-03-17 8:53 ` [U-Boot] [RFC PATCH 13/17] m68k: " Masahiro Yamada
2014-03-17 8:53 ` [U-Boot] [RFC PATCH 14/17] powerpc: " Masahiro Yamada
2014-03-17 8:53 ` [U-Boot] [RFC PATCH 15/17] kbuild: remove CONFIG_SPL/CONFIG_TPL definition in config headers Masahiro Yamada
2014-03-17 8:53 ` [U-Boot] [RFC PATCH 16/17] kconfig: remove old script Masahiro Yamada
2014-03-17 8:53 ` [U-Boot] [RFC PATCH 17/17] kconfig: add CONFIG_CROSS_COMPILE Masahiro Yamada
2014-03-21 2:15 ` [U-Boot] [RFC PATCH 0/17] Version 0 of Kconfig for U-Boot Simon Glass
2014-03-24 5:58 ` Masahiro Yamada
2014-03-24 7:30 ` Wolfgang Denk
2014-03-24 7:52 ` Masahiro Yamada
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1395046392-1212-6-git-send-email-yamada.m@jp.panasonic.com \
--to=yamada.m@jp.panasonic.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.