All of lore.kernel.org
 help / color / mirror / Atom feed
From: Martijn de Gouw <martijn.de.gouw@prodrive-technologies.com>
To: <linuxppc-dev@lists.ozlabs.org>, <scottwood@freescale.com>
Cc: stef.van.os@prodrive-technologies.com,
	Martijn de Gouw <martijn.de.gouw@prodrive.nl>,
	Martijn de Gouw <martijn.de.gouw@prodrive-technologies.com>
Subject: [PATCH] powerpc/85xx: Add OCA4080 board support
Date: Mon, 14 Apr 2014 14:35:10 +0200	[thread overview]
Message-ID: <1397478910-26361-1-git-send-email-martijn.de.gouw@prodrive-technologies.com> (raw)

From: Martijn de Gouw <martijn.de.gouw@prodrive.nl>

OCA4080 overview:
- 1.466 GHz Freescale QorIQ P4080E Processor
- 4Gbyte DDR3 on board
- 8Mbyte Nor flash
- Serial RapidIO 1.2
- 1 x 10/100/1000 BASE-T front ethernet
- 1 x 1000 BASE-BX ethernet on AMC connector

Signed-off-by: Martijn de Gouw <martijn.de.gouw@prodrive-technologies.com>
---
 arch/powerpc/boot/dts/oca4080.dts             |  148 +++++++++++++++++++++++++
 arch/powerpc/configs/corenet32_smp_defconfig  |    1 +
 arch/powerpc/platforms/85xx/Kconfig           |    2 +-
 arch/powerpc/platforms/85xx/corenet_generic.c |    4 +-
 4 files changed, 152 insertions(+), 3 deletions(-)
 create mode 100644 arch/powerpc/boot/dts/oca4080.dts

diff --git a/arch/powerpc/boot/dts/oca4080.dts b/arch/powerpc/boot/dts/oca4080.dts
new file mode 100644
index 0000000..8926a61
--- /dev/null
+++ b/arch/powerpc/boot/dts/oca4080.dts
@@ -0,0 +1,148 @@
+/*
+ * OCA4080 Device Tree Source
+ *
+ * Copyright 2014 Prodrive Technologies B.V.
+ *
+ * Based on:
+ * P4080DS Device Tree Source
+ * Copyright 2009-2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p4080si-pre.dtsi"
+
+/ {
+	model = "fsl,OCA4080";
+	compatible = "fsl,OCA4080";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	memory {
+		device_type = "memory";
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+
+		i2c@118000 {
+			status = "disabled";
+		};
+
+		i2c@118100 {
+			status = "disabled";
+		};
+
+		i2c@119000 {
+			status = "disabled";
+		};
+
+		i2c@119100 {
+			status = "disabled";
+		};
+
+		usb0: usb@210000 {
+			status = "disabled";
+		};
+
+		usb1: usb@211000 {
+			status = "disabled";
+		};
+	};
+
+	rio: rapidio@ffe0c0000 {
+		reg = <0xf 0xfe0c0000 0 0x11000>;
+
+		port1 {
+			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+		};
+	};
+
+	lbc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x1000>;
+		ranges = <0 0 0xf 0xef800000 0x800000>;
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0 0 0x00800000>;
+			bank-width = <2>;
+			device-width = <2>;
+			partition@rcw {
+				label = "rcw";
+				reg = <0x00000000 0x00020000>;
+			};
+			partition@fman-ucode {
+				label = "fman-ucode";
+				reg = <0x00020000 0x00020000>;
+			};
+			partition@user {
+				label = "user";
+				reg = <0x00040000 0x00680000>;
+			};
+			partition@env0 {
+				label = "env0";
+				reg = <0x006c0000 0x00020000>;
+			};
+			partition@env1 {
+				label = "env1";
+				reg = <0x006e0000 0x00020000>;
+			};
+			partition@u-boot {
+				label = "u-boot";
+				reg = <0x00700000 0x00080000>;
+			};
+			partition@u-boot-backup {
+				label = "u-boot-backup";
+				reg = <0x00780000 0x00080000>;
+			};
+		};
+	};
+
+	pci0: pcie@ffe200000 {
+		status = "disabled";
+	};
+
+	pci1: pcie@ffe201000 {
+		status = "disabled";
+	};
+
+	pci2: pcie@ffe202000 {
+		status = "disabled";
+	};
+};
+
+/include/ "fsl/p4080si-post.dtsi"
diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig
index bbd794d..c19ff05 100644
--- a/arch/powerpc/configs/corenet32_smp_defconfig
+++ b/arch/powerpc/configs/corenet32_smp_defconfig
@@ -72,6 +72,7 @@ CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_MTD_M25P80=y
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index c17aae8..2e2d8ab 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -263,7 +263,7 @@ config CORENET_GENERIC
 	help
 	  This option enables support for the FSL CoreNet based boards.
 	  For 32bit kernel, the following boards are supported:
-	    P2041 RDB, P3041 DS and P4080 DS
+	    P2041 RDB, P3041 DS, OCA4080 and P4080 DS
 	  For 64bit kernel, the following boards are supported:
 	    T4240 QDS and B4 QDS
 	  The following boards are supported for both 32bit and 64bit kernel:
diff --git a/arch/powerpc/platforms/85xx/corenet_generic.c b/arch/powerpc/platforms/85xx/corenet_generic.c
index fbd871e..f3685047 100644
--- a/arch/powerpc/platforms/85xx/corenet_generic.c
+++ b/arch/powerpc/platforms/85xx/corenet_generic.c
@@ -55,8 +55,6 @@ void __init corenet_gen_setup_arch(void)
 	mpc85xx_smp_init();
 
 	swiotlb_detect_4g();
-
-	pr_info("%s board from Freescale Semiconductor\n", ppc_md.name);
 }
 
 static const struct of_device_id of_device_ids[] = {
@@ -99,6 +97,7 @@ int __init corenet_gen_publish_devices(void)
 static const char * const boards[] __initconst = {
 	"fsl,P2041RDB",
 	"fsl,P3041DS",
+	"fsl,OCA4080",
 	"fsl,P4080DS",
 	"fsl,P5020DS",
 	"fsl,P5040DS",
@@ -112,6 +111,7 @@ static const char * const boards[] __initconst = {
 static const char * const hv_boards[] __initconst = {
 	"fsl,P2041RDB-hv",
 	"fsl,P3041DS-hv",
+	"fsl,OCA4080-hv",
 	"fsl,P4080DS-hv",
 	"fsl,P5020DS-hv",
 	"fsl,P5040DS-hv",
-- 
1.7.10.4

             reply	other threads:[~2014-04-14 13:00 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-04-14 12:35 Martijn de Gouw [this message]
2014-04-14 22:28 ` [PATCH] powerpc/85xx: Add OCA4080 board support Scott Wood
2014-04-15 11:24   ` Martijn de Gouw
2014-04-15 17:15     ` Scott Wood

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1397478910-26361-1-git-send-email-martijn.de.gouw@prodrive-technologies.com \
    --to=martijn.de.gouw@prodrive-technologies.com \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=martijn.de.gouw@prodrive.nl \
    --cc=scottwood@freescale.com \
    --cc=stef.van.os@prodrive-technologies.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.