From mboxrd@z Thu Jan 1 00:00:00 1970 From: Samuel Egli Date: Thu, 24 Apr 2014 17:57:55 +0200 Subject: [U-Boot] [PATCH 4/5] siemens: change LED indication in DFU mode In-Reply-To: <1398355077-6661-1-git-send-email-samuel.egli@siemens.com> References: <1398355077-6661-1-git-send-email-samuel.egli@siemens.com> Message-ID: <1398355077-6661-5-git-send-email-samuel.egli@siemens.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de In order to have the same LED indication like in another product when ready for updating, enable only red led and disable status LED when entering DFU mode. The status LED is only switched off when defined in board file. Signed-off-by: Samuel Egli Cc: Roger Meier Cc: Heiko Schocher Cc: Wolfgang Denk --- include/configs/dxr2.h | 3 ++- include/configs/siemens-am33x-common.h | 6 +++++- 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/include/configs/dxr2.h b/include/configs/dxr2.h index 4612f85..76e6cac 100644 --- a/include/configs/dxr2.h +++ b/include/configs/dxr2.h @@ -24,7 +24,8 @@ #undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC #define BOARD_DFU_BUTTON_GPIO 27 -#define BOARD_DFU_BUTTON_LED 64 +#define BOARD_DFU_BUTTON_LED 64 /* red LED */ +#define BOARD_STATUS_LED 103 /* green LED */ #define GPIO_LAN9303_NRST 88 /* GPIO2_24 = gpio88 */ #undef CONFIG_DOS_PARTITION diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index 721c4e6..261b348 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -402,7 +402,11 @@ "dfu_args=run bootargs_defaults;" \ "setenv bootargs ${bootargs} ;" \ "mtdparts default; " \ - "dfu 0 nand 0; \0" \ + "led dfu 1;" \ + "led stat 0;" \ + "dfu 0 nand 0;" \ + "led dfu 0;" \ + "led stat 1;\0" \ "dfu_alt_info=" DFU_ALT_INFO_NAND "\0" \ "net_args=run bootargs_defaults;" \ "mtdparts default;" \ -- 1.7.10.4