From mboxrd@z Thu Jan 1 00:00:00 1970 From: Arun Kumar K Subject: [PATCH 0/3] Add Exynos5800 support Date: Fri, 2 May 2014 18:33:38 +0530 Message-ID: <1399035821-25096-1-git-send-email-arun.kk@samsung.com> Return-path: Sender: linux-samsung-soc-owner@vger.kernel.org To: linux-samsung-soc@vger.kernel.org, devicetree@vger.kernel.org Cc: kgene.kim@samsung.com, dianders@chromium.org, olofj@google.com, t.figa@samsung.com, sachin.kamat@linaro.org, tushar.behera@linaro.org, arunkk.samsung@gmail.com List-Id: devicetree@vger.kernel.org Exynos5800 is a derivative of Exynos5420 with higher clock speeds and most other IP blocks remaining the same except for a few. Due to the similarities with 5420, following is done to achieve maximum code re-use: - Use the same 5420 clock file with few changes for adding extra 5800 clocks. - Include the 5420 dtsi into 5800 and override required properties. This series is dependent on the following patches 1) Adding node labels for Exynos5420 https://patchwork.kernel.org/patch/4092701/ 2) Adding pwm nodes for backlight https://patchwork.kernel.org/patch/4101881/ Alim Akhtar (1): clk: exynos5420: Add 5800 specific clocks Arun Kumar K (2): ARM: dts: Add Exynos5800 dt file ARM: dts: Add peach-pi board support .../devicetree/bindings/clock/exynos5420-clock.txt | 3 +- arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/exynos5800-peach-pi.dts | 144 +++++++++++++++ arch/arm/boot/dts/exynos5800.dtsi | 24 +++ drivers/clk/samsung/clk-exynos5420.c | 192 +++++++++++++++----- include/dt-bindings/clock/exynos5420.h | 1 + 6 files changed, 320 insertions(+), 47 deletions(-) create mode 100644 arch/arm/boot/dts/exynos5800-peach-pi.dts create mode 100644 arch/arm/boot/dts/exynos5800.dtsi -- 1.7.9.5