From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757680AbaEFN6s (ORCPT ); Tue, 6 May 2014 09:58:48 -0400 Received: from bear.ext.ti.com ([192.94.94.41]:44660 "EHLO bear.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757653AbaEFN6p (ORCPT ); Tue, 6 May 2014 09:58:45 -0400 From: Sricharan R To: , , , , , , , , , , , , , , , , , CC: Sricharan R Subject: [PATCH V5 2/3] arm: dts: dra7: Replace peripheral interrupt numbers with crossbar inputs Date: Tue, 6 May 2014 19:26:18 +0530 Message-ID: <1399384579-25620-3-git-send-email-r.sricharan@ti.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1399384579-25620-1-git-send-email-r.sricharan@ti.com> References: <1399384579-25620-1-git-send-email-r.sricharan@ti.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Now with the crossbar IP in picture, the peripherals do not have the fixed interrupt lines. Instead they rely on the crossbar irqchip to allocate and map a free interrupt line to its crossbar input. So replacing all the peripheral interrupt numbers with its fixed crossbar input lines. Cc: Benoit Cousson Cc: Santosh Shilimkar Cc: Rajendra Nayak Cc: Tony Lindgren Signed-off-by: Sricharan R Signed-off-by: Nishanth Menon --- [V5] Rebased on 3.15-rc4 and replaced irqs numbers with crossbar numbers for new peripherals. arch/arm/boot/dts/dra7.dtsi | 100 +++++++++++++++++++++++-------------------- 1 file changed, 54 insertions(+), 46 deletions(-) diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 0274a86..52e4bd0 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -106,8 +106,8 @@ ti,hwmods = "l3_main_1", "l3_main_2"; reg = <0x44000000 0x2000>, <0x44800000 0x3000>; - interrupts = , - ; + interrupts = , + ; prm: prm@4ae06000 { compatible = "ti,dra7-prm"; @@ -182,10 +182,10 @@ sdma: dma-controller@4a056000 { compatible = "ti,omap4430-sdma"; reg = <0x4a056000 0x1000>; - interrupts = , - , - , - ; + interrupts = , + , + , + ; #dma-cells = <1>; #dma-channels = <32>; #dma-requests = <127>; @@ -194,7 +194,7 @@ gpio1: gpio@4ae10000 { compatible = "ti,omap4-gpio"; reg = <0x4ae10000 0x200>; - interrupts = ; + interrupts = ; ti,hwmods = "gpio1"; gpio-controller; #gpio-cells = <2>; @@ -205,7 +205,7 @@ gpio2: gpio@48055000 { compatible = "ti,omap4-gpio"; reg = <0x48055000 0x200>; - interrupts = ; + interrupts = ; ti,hwmods = "gpio2"; gpio-controller; #gpio-cells = <2>; @@ -216,7 +216,7 @@ gpio3: gpio@48057000 { compatible = "ti,omap4-gpio"; reg = <0x48057000 0x200>; - interrupts = ; + interrupts = ; ti,hwmods = "gpio3"; gpio-controller; #gpio-cells = <2>; @@ -227,7 +227,7 @@ gpio4: gpio@48059000 { compatible = "ti,omap4-gpio"; reg = <0x48059000 0x200>; - interrupts = ; + interrupts = ; ti,hwmods = "gpio4"; gpio-controller; #gpio-cells = <2>; @@ -238,7 +238,7 @@ gpio5: gpio@4805b000 { compatible = "ti,omap4-gpio"; reg = <0x4805b000 0x200>; - interrupts = ; + interrupts = ; ti,hwmods = "gpio5"; gpio-controller; #gpio-cells = <2>; @@ -249,7 +249,7 @@ gpio6: gpio@4805d000 { compatible = "ti,omap4-gpio"; reg = <0x4805d000 0x200>; - interrupts = ; + interrupts = ; ti,hwmods = "gpio6"; gpio-controller; #gpio-cells = <2>; @@ -260,7 +260,7 @@ gpio7: gpio@48051000 { compatible = "ti,omap4-gpio"; reg = <0x48051000 0x200>; - interrupts = ; + interrupts = ; ti,hwmods = "gpio7"; gpio-controller; #gpio-cells = <2>; @@ -271,7 +271,7 @@ gpio8: gpio@48053000 { compatible = "ti,omap4-gpio"; reg = <0x48053000 0x200>; - interrupts = ; + interrupts = ; ti,hwmods = "gpio8"; gpio-controller; #gpio-cells = <2>; @@ -282,7 +282,7 @@ uart1: serial@4806a000 { compatible = "ti,omap4-uart"; reg = <0x4806a000 0x100>; - interrupts = ; + interrupts = ; ti,hwmods = "uart1"; clock-frequency = <48000000>; status = "disabled"; @@ -291,7 +291,7 @@ uart2: serial@4806c000 { compatible = "ti,omap4-uart"; reg = <0x4806c000 0x100>; - interrupts = ; + interrupts = ; ti,hwmods = "uart2"; clock-frequency = <48000000>; status = "disabled"; @@ -300,7 +300,7 @@ uart3: serial@48020000 { compatible = "ti,omap4-uart"; reg = <0x48020000 0x100>; - interrupts = ; + interrupts = ; ti,hwmods = "uart3"; clock-frequency = <48000000>; status = "disabled"; @@ -309,7 +309,7 @@ uart4: serial@4806e000 { compatible = "ti,omap4-uart"; reg = <0x4806e000 0x100>; - interrupts = ; + interrupts = ; ti,hwmods = "uart4"; clock-frequency = <48000000>; status = "disabled"; @@ -318,7 +318,7 @@ uart5: serial@48066000 { compatible = "ti,omap4-uart"; reg = <0x48066000 0x100>; - interrupts = ; + interrupts = ; ti,hwmods = "uart5"; clock-frequency = <48000000>; status = "disabled"; @@ -327,7 +327,7 @@ uart6: serial@48068000 { compatible = "ti,omap4-uart"; reg = <0x48068000 0x100>; - interrupts = ; + interrupts = ; ti,hwmods = "uart6"; clock-frequency = <48000000>; status = "disabled"; @@ -336,6 +336,7 @@ uart7: serial@48420000 { compatible = "ti,omap4-uart"; reg = <0x48420000 0x100>; + interrupts = ; ti,hwmods = "uart7"; clock-frequency = <48000000>; status = "disabled"; @@ -344,6 +345,7 @@ uart8: serial@48422000 { compatible = "ti,omap4-uart"; reg = <0x48422000 0x100>; + interrupts = ; ti,hwmods = "uart8"; clock-frequency = <48000000>; status = "disabled"; @@ -352,6 +354,7 @@ uart9: serial@48424000 { compatible = "ti,omap4-uart"; reg = <0x48424000 0x100>; + interrupts = ; ti,hwmods = "uart9"; clock-frequency = <48000000>; status = "disabled"; @@ -360,6 +363,7 @@ uart10: serial@4ae2b000 { compatible = "ti,omap4-uart"; reg = <0x4ae2b000 0x100>; + interrupts = ; ti,hwmods = "uart10"; clock-frequency = <48000000>; status = "disabled"; @@ -368,7 +372,7 @@ timer1: timer@4ae18000 { compatible = "ti,omap5430-timer"; reg = <0x4ae18000 0x80>; - interrupts = ; + interrupts = ; ti,hwmods = "timer1"; ti,timer-alwon; }; @@ -376,28 +380,28 @@ timer2: timer@48032000 { compatible = "ti,omap5430-timer"; reg = <0x48032000 0x80>; - interrupts = ; + interrupts = ; ti,hwmods = "timer2"; }; timer3: timer@48034000 { compatible = "ti,omap5430-timer"; reg = <0x48034000 0x80>; - interrupts = ; + interrupts = ; ti,hwmods = "timer3"; }; timer4: timer@48036000 { compatible = "ti,omap5430-timer"; reg = <0x48036000 0x80>; - interrupts = ; + interrupts = ; ti,hwmods = "timer4"; }; timer5: timer@48820000 { compatible = "ti,omap5430-timer"; reg = <0x48820000 0x80>; - interrupts = ; + interrupts = ; ti,hwmods = "timer5"; ti,timer-dsp; }; @@ -405,7 +409,7 @@ timer6: timer@48822000 { compatible = "ti,omap5430-timer"; reg = <0x48822000 0x80>; - interrupts = ; + interrupts = ; ti,hwmods = "timer6"; ti,timer-dsp; ti,timer-pwm; @@ -414,7 +418,7 @@ timer7: timer@48824000 { compatible = "ti,omap5430-timer"; reg = <0x48824000 0x80>; - interrupts = ; + interrupts = ; ti,hwmods = "timer7"; ti,timer-dsp; }; @@ -422,7 +426,7 @@ timer8: timer@48826000 { compatible = "ti,omap5430-timer"; reg = <0x48826000 0x80>; - interrupts = ; + interrupts = ; ti,hwmods = "timer8"; ti,timer-dsp; ti,timer-pwm; @@ -431,21 +435,21 @@ timer9: timer@4803e000 { compatible = "ti,omap5430-timer"; reg = <0x4803e000 0x80>; - interrupts = ; + interrupts = ; ti,hwmods = "timer9"; }; timer10: timer@48086000 { compatible = "ti,omap5430-timer"; reg = <0x48086000 0x80>; - interrupts = ; + interrupts = ; ti,hwmods = "timer10"; }; timer11: timer@48088000 { compatible = "ti,omap5430-timer"; reg = <0x48088000 0x80>; - interrupts = ; + interrupts = ; ti,hwmods = "timer11"; ti,timer-pwm; }; @@ -453,6 +457,7 @@ timer13: timer@48828000 { compatible = "ti,omap5430-timer"; reg = <0x48828000 0x80>; + interrupts = ; ti,hwmods = "timer13"; status = "disabled"; }; @@ -460,6 +465,7 @@ timer14: timer@4882a000 { compatible = "ti,omap5430-timer"; reg = <0x4882a000 0x80>; + interrupts = ; ti,hwmods = "timer14"; status = "disabled"; }; @@ -467,6 +473,7 @@ timer15: timer@4882c000 { compatible = "ti,omap5430-timer"; reg = <0x4882c000 0x80>; + interrupts = ; ti,hwmods = "timer15"; status = "disabled"; }; @@ -474,6 +481,7 @@ timer16: timer@4882e000 { compatible = "ti,omap5430-timer"; reg = <0x4882e000 0x80>; + interrupts = ; ti,hwmods = "timer16"; status = "disabled"; }; @@ -481,7 +489,7 @@ wdt2: wdt@4ae14000 { compatible = "ti,omap4-wdt"; reg = <0x4ae14000 0x80>; - interrupts = ; + interrupts = ; ti,hwmods = "wd_timer2"; }; @@ -495,14 +503,14 @@ dmm@4e000000 { compatible = "ti,omap5-dmm"; reg = <0x4e000000 0x800>; - interrupts = <0 113 0x4>; + interrupts = ; ti,hwmods = "dmm"; }; i2c1: i2c@48070000 { compatible = "ti,omap4-i2c"; reg = <0x48070000 0x100>; - interrupts = ; + interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c1"; @@ -512,7 +520,7 @@ i2c2: i2c@48072000 { compatible = "ti,omap4-i2c"; reg = <0x48072000 0x100>; - interrupts = ; + interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c2"; @@ -522,7 +530,7 @@ i2c3: i2c@48060000 { compatible = "ti,omap4-i2c"; reg = <0x48060000 0x100>; - interrupts = ; + interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c3"; @@ -532,7 +540,7 @@ i2c4: i2c@4807a000 { compatible = "ti,omap4-i2c"; reg = <0x4807a000 0x100>; - interrupts = ; + interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c4"; @@ -542,7 +550,7 @@ i2c5: i2c@4807c000 { compatible = "ti,omap4-i2c"; reg = <0x4807c000 0x100>; - interrupts = ; + interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c5"; @@ -552,7 +560,7 @@ mmc1: mmc@4809c000 { compatible = "ti,omap4-hsmmc"; reg = <0x4809c000 0x400>; - interrupts = ; + interrupts = ; ti,hwmods = "mmc1"; ti,dual-volt; ti,needs-special-reset; @@ -565,7 +573,7 @@ mmc2: mmc@480b4000 { compatible = "ti,omap4-hsmmc"; reg = <0x480b4000 0x400>; - interrupts = ; + interrupts = ; ti,hwmods = "mmc2"; ti,needs-special-reset; dmas = <&sdma 47>, <&sdma 48>; @@ -576,7 +584,7 @@ mmc3: mmc@480ad000 { compatible = "ti,omap4-hsmmc"; reg = <0x480ad000 0x400>; - interrupts = ; + interrupts = ; ti,hwmods = "mmc3"; ti,needs-special-reset; dmas = <&sdma 77>, <&sdma 78>; @@ -587,7 +595,7 @@ mmc4: mmc@480d1000 { compatible = "ti,omap4-hsmmc"; reg = <0x480d1000 0x400>; - interrupts = ; + interrupts = ; ti,hwmods = "mmc4"; ti,needs-special-reset; dmas = <&sdma 57>, <&sdma 58>; @@ -730,7 +738,7 @@ mcspi1: spi@48098000 { compatible = "ti,omap4-mcspi"; reg = <0x48098000 0x200>; - interrupts = ; + interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi1"; @@ -751,7 +759,7 @@ mcspi2: spi@4809a000 { compatible = "ti,omap4-mcspi"; reg = <0x4809a000 0x200>; - interrupts = ; + interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi2"; @@ -767,7 +775,7 @@ mcspi3: spi@480b8000 { compatible = "ti,omap4-mcspi"; reg = <0x480b8000 0x200>; - interrupts = ; + interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi3"; @@ -780,7 +788,7 @@ mcspi4: spi@480ba000 { compatible = "ti,omap4-mcspi"; reg = <0x480ba000 0x200>; - interrupts = ; + interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi4"; -- 1.7.9.5 From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sricharan R Subject: [PATCH V5 2/3] arm: dts: dra7: Replace peripheral interrupt numbers with crossbar inputs Date: Tue, 6 May 2014 19:26:18 +0530 Message-ID: <1399384579-25620-3-git-send-email-r.sricharan@ti.com> References: <1399384579-25620-1-git-send-email-r.sricharan@ti.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <1399384579-25620-1-git-send-email-r.sricharan@ti.com> Sender: linux-kernel-owner@vger.kernel.org To: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-doc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org, linus.walleij@linaro.org, linux@arm.linux.org.uk, tony@atomide.com, rnayak@ti.com, marc.zyngier@arm.com, grant.likely@linaro.org, mark.rutland@arm.com, tglx@linutronix.de, galak@codeaurora.org, santosh.shilimkar@ti.com, nm@ti.com, bcousson@baylibre.com, robherring2@gmail.com Cc: Sricharan R List-Id: devicetree@vger.kernel.org Now with the crossbar IP in picture, the peripherals do not have the fixed interrupt lines. Instead they rely on the crossbar irqchip to allocate and map a free interrupt line to its crossbar input. So replacing all the peripheral interrupt numbers with its fixed crossbar input lines. Cc: Benoit Cousson Cc: Santosh Shilimkar Cc: Rajendra Nayak Cc: Tony Lindgren Signed-off-by: Sricharan R Signed-off-by: Nishanth Menon --- [V5] Rebased on 3.15-rc4 and replaced irqs numbers with crossbar numbers for new peripherals. arch/arm/boot/dts/dra7.dtsi | 100 +++++++++++++++++++++++-------------------- 1 file changed, 54 insertions(+), 46 deletions(-) diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 0274a86..52e4bd0 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -106,8 +106,8 @@ ti,hwmods = "l3_main_1", "l3_main_2"; reg = <0x44000000 0x2000>, <0x44800000 0x3000>; - interrupts = , - ; + interrupts = , + ; prm: prm@4ae06000 { compatible = "ti,dra7-prm"; @@ -182,10 +182,10 @@ sdma: dma-controller@4a056000 { compatible = "ti,omap4430-sdma"; reg = <0x4a056000 0x1000>; - interrupts = , - , - , - ; + interrupts = , + , + , + ; #dma-cells = <1>; #dma-channels = <32>; #dma-requests = <127>; @@ -194,7 +194,7 @@ gpio1: gpio@4ae10000 { compatible = "ti,omap4-gpio"; reg = <0x4ae10000 0x200>; - interrupts = ; + interrupts = ; ti,hwmods = "gpio1"; gpio-controller; #gpio-cells = <2>; @@ -205,7 +205,7 @@ gpio2: gpio@48055000 { compatible = "ti,omap4-gpio"; reg = <0x48055000 0x200>; - interrupts = ; + interrupts = ; ti,hwmods = "gpio2"; gpio-controller; #gpio-cells = <2>; @@ -216,7 +216,7 @@ gpio3: gpio@48057000 { compatible = "ti,omap4-gpio"; reg = <0x48057000 0x200>; - interrupts = ; + interrupts = ; ti,hwmods = "gpio3"; gpio-controller; #gpio-cells = <2>; @@ -227,7 +227,7 @@ gpio4: gpio@48059000 { compatible = "ti,omap4-gpio"; reg = <0x48059000 0x200>; - interrupts = ; + interrupts = ; ti,hwmods = "gpio4"; gpio-controller; #gpio-cells = <2>; @@ -238,7 +238,7 @@ gpio5: gpio@4805b000 { compatible = "ti,omap4-gpio"; reg = <0x4805b000 0x200>; - interrupts = ; + interrupts = ; ti,hwmods = "gpio5"; gpio-controller; #gpio-cells = <2>; @@ -249,7 +249,7 @@ gpio6: gpio@4805d000 { compatible = "ti,omap4-gpio"; reg = <0x4805d000 0x200>; - interrupts = ; + interrupts = ; ti,hwmods = "gpio6"; gpio-controller; #gpio-cells = <2>; @@ -260,7 +260,7 @@ gpio7: gpio@48051000 { compatible = "ti,omap4-gpio"; reg = <0x48051000 0x200>; - interrupts = ; + interrupts = ; ti,hwmods = "gpio7"; gpio-controller; #gpio-cells = <2>; @@ -271,7 +271,7 @@ gpio8: gpio@48053000 { compatible = "ti,omap4-gpio"; reg = <0x48053000 0x200>; - interrupts = ; + interrupts = ; ti,hwmods = "gpio8"; gpio-controller; #gpio-cells = <2>; @@ -282,7 +282,7 @@ uart1: serial@4806a000 { compatible = "ti,omap4-uart"; reg = <0x4806a000 0x100>; - interrupts = ; + interrupts = ; ti,hwmods = "uart1"; clock-frequency = <48000000>; status = "disabled"; @@ -291,7 +291,7 @@ uart2: serial@4806c000 { compatible = "ti,omap4-uart"; reg = <0x4806c000 0x100>; - interrupts = ; + interrupts = ; ti,hwmods = "uart2"; clock-frequency = <48000000>; status = "disabled"; @@ -300,7 +300,7 @@ uart3: serial@48020000 { compatible = "ti,omap4-uart"; reg = <0x48020000 0x100>; - interrupts = ; + interrupts = ; ti,hwmods = "uart3"; clock-frequency = <48000000>; status = "disabled"; @@ -309,7 +309,7 @@ uart4: serial@4806e000 { compatible = "ti,omap4-uart"; reg = <0x4806e000 0x100>; - interrupts = ; + interrupts = ; ti,hwmods = "uart4"; clock-frequency = <48000000>; status = "disabled"; @@ -318,7 +318,7 @@ uart5: serial@48066000 { compatible = "ti,omap4-uart"; reg = <0x48066000 0x100>; - interrupts = ; + interrupts = ; ti,hwmods = "uart5"; clock-frequency = <48000000>; status = "disabled"; @@ -327,7 +327,7 @@ uart6: serial@48068000 { compatible = "ti,omap4-uart"; reg = <0x48068000 0x100>; - interrupts = ; + interrupts = ; ti,hwmods = "uart6"; clock-frequency = <48000000>; status = "disabled"; @@ -336,6 +336,7 @@ uart7: serial@48420000 { compatible = "ti,omap4-uart"; reg = <0x48420000 0x100>; + interrupts = ; ti,hwmods = "uart7"; clock-frequency = <48000000>; status = "disabled"; @@ -344,6 +345,7 @@ uart8: serial@48422000 { compatible = "ti,omap4-uart"; reg = <0x48422000 0x100>; + interrupts = ; ti,hwmods = "uart8"; clock-frequency = <48000000>; status = "disabled"; @@ -352,6 +354,7 @@ uart9: serial@48424000 { compatible = "ti,omap4-uart"; reg = <0x48424000 0x100>; + interrupts = ; ti,hwmods = "uart9"; clock-frequency = <48000000>; status = "disabled"; @@ -360,6 +363,7 @@ uart10: serial@4ae2b000 { compatible = "ti,omap4-uart"; reg = <0x4ae2b000 0x100>; + interrupts = ; ti,hwmods = "uart10"; clock-frequency = <48000000>; status = "disabled"; @@ -368,7 +372,7 @@ timer1: timer@4ae18000 { compatible = "ti,omap5430-timer"; reg = <0x4ae18000 0x80>; - interrupts = ; + interrupts = ; ti,hwmods = "timer1"; ti,timer-alwon; }; @@ -376,28 +380,28 @@ timer2: timer@48032000 { compatible = "ti,omap5430-timer"; reg = <0x48032000 0x80>; - interrupts = ; + interrupts = ; ti,hwmods = "timer2"; }; timer3: timer@48034000 { compatible = "ti,omap5430-timer"; reg = <0x48034000 0x80>; - interrupts = ; + interrupts = ; ti,hwmods = "timer3"; }; timer4: timer@48036000 { compatible = "ti,omap5430-timer"; reg = <0x48036000 0x80>; - interrupts = ; + interrupts = ; ti,hwmods = "timer4"; }; timer5: timer@48820000 { compatible = "ti,omap5430-timer"; reg = <0x48820000 0x80>; - interrupts = ; + interrupts = ; ti,hwmods = "timer5"; ti,timer-dsp; }; @@ -405,7 +409,7 @@ timer6: timer@48822000 { compatible = "ti,omap5430-timer"; reg = <0x48822000 0x80>; - interrupts = ; + interrupts = ; ti,hwmods = "timer6"; ti,timer-dsp; ti,timer-pwm; @@ -414,7 +418,7 @@ timer7: timer@48824000 { compatible = "ti,omap5430-timer"; reg = <0x48824000 0x80>; - interrupts = ; + interrupts = ; ti,hwmods = "timer7"; ti,timer-dsp; }; @@ -422,7 +426,7 @@ timer8: timer@48826000 { compatible = "ti,omap5430-timer"; reg = <0x48826000 0x80>; - interrupts = ; + interrupts = ; ti,hwmods = "timer8"; ti,timer-dsp; ti,timer-pwm; @@ -431,21 +435,21 @@ timer9: timer@4803e000 { compatible = "ti,omap5430-timer"; reg = <0x4803e000 0x80>; - interrupts = ; + interrupts = ; ti,hwmods = "timer9"; }; timer10: timer@48086000 { compatible = "ti,omap5430-timer"; reg = <0x48086000 0x80>; - interrupts = ; + interrupts = ; ti,hwmods = "timer10"; }; timer11: timer@48088000 { compatible = "ti,omap5430-timer"; reg = <0x48088000 0x80>; - interrupts = ; + interrupts = ; ti,hwmods = "timer11"; ti,timer-pwm; }; @@ -453,6 +457,7 @@ timer13: timer@48828000 { compatible = "ti,omap5430-timer"; reg = <0x48828000 0x80>; + interrupts = ; ti,hwmods = "timer13"; status = "disabled"; }; @@ -460,6 +465,7 @@ timer14: timer@4882a000 { compatible = "ti,omap5430-timer"; reg = <0x4882a000 0x80>; + interrupts = ; ti,hwmods = "timer14"; status = "disabled"; }; @@ -467,6 +473,7 @@ timer15: timer@4882c000 { compatible = "ti,omap5430-timer"; reg = <0x4882c000 0x80>; + interrupts = ; ti,hwmods = "timer15"; status = "disabled"; }; @@ -474,6 +481,7 @@ timer16: timer@4882e000 { compatible = "ti,omap5430-timer"; reg = <0x4882e000 0x80>; + interrupts = ; ti,hwmods = "timer16"; status = "disabled"; }; @@ -481,7 +489,7 @@ wdt2: wdt@4ae14000 { compatible = "ti,omap4-wdt"; reg = <0x4ae14000 0x80>; - interrupts = ; + interrupts = ; ti,hwmods = "wd_timer2"; }; @@ -495,14 +503,14 @@ dmm@4e000000 { compatible = "ti,omap5-dmm"; reg = <0x4e000000 0x800>; - interrupts = <0 113 0x4>; + interrupts = ; ti,hwmods = "dmm"; }; i2c1: i2c@48070000 { compatible = "ti,omap4-i2c"; reg = <0x48070000 0x100>; - interrupts = ; + interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c1"; @@ -512,7 +520,7 @@ i2c2: i2c@48072000 { compatible = "ti,omap4-i2c"; reg = <0x48072000 0x100>; - interrupts = ; + interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c2"; @@ -522,7 +530,7 @@ i2c3: i2c@48060000 { compatible = "ti,omap4-i2c"; reg = <0x48060000 0x100>; - interrupts = ; + interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c3"; @@ -532,7 +540,7 @@ i2c4: i2c@4807a000 { compatible = "ti,omap4-i2c"; reg = <0x4807a000 0x100>; - interrupts = ; + interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c4"; @@ -542,7 +550,7 @@ i2c5: i2c@4807c000 { compatible = "ti,omap4-i2c"; reg = <0x4807c000 0x100>; - interrupts = ; + interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c5"; @@ -552,7 +560,7 @@ mmc1: mmc@4809c000 { compatible = "ti,omap4-hsmmc"; reg = <0x4809c000 0x400>; - interrupts = ; + interrupts = ; ti,hwmods = "mmc1"; ti,dual-volt; ti,needs-special-reset; @@ -565,7 +573,7 @@ mmc2: mmc@480b4000 { compatible = "ti,omap4-hsmmc"; reg = <0x480b4000 0x400>; - interrupts = ; + interrupts = ; ti,hwmods = "mmc2"; ti,needs-special-reset; dmas = <&sdma 47>, <&sdma 48>; @@ -576,7 +584,7 @@ mmc3: mmc@480ad000 { compatible = "ti,omap4-hsmmc"; reg = <0x480ad000 0x400>; - interrupts = ; + interrupts = ; ti,hwmods = "mmc3"; ti,needs-special-reset; dmas = <&sdma 77>, <&sdma 78>; @@ -587,7 +595,7 @@ mmc4: mmc@480d1000 { compatible = "ti,omap4-hsmmc"; reg = <0x480d1000 0x400>; - interrupts = ; + interrupts = ; ti,hwmods = "mmc4"; ti,needs-special-reset; dmas = <&sdma 57>, <&sdma 58>; @@ -730,7 +738,7 @@ mcspi1: spi@48098000 { compatible = "ti,omap4-mcspi"; reg = <0x48098000 0x200>; - interrupts = ; + interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi1"; @@ -751,7 +759,7 @@ mcspi2: spi@4809a000 { compatible = "ti,omap4-mcspi"; reg = <0x4809a000 0x200>; - interrupts = ; + interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi2"; @@ -767,7 +775,7 @@ mcspi3: spi@480b8000 { compatible = "ti,omap4-mcspi"; reg = <0x480b8000 0x200>; - interrupts = ; + interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi3"; @@ -780,7 +788,7 @@ mcspi4: spi@480ba000 { compatible = "ti,omap4-mcspi"; reg = <0x480ba000 0x200>; - interrupts = ; + interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi4"; -- 1.7.9.5 From mboxrd@z Thu Jan 1 00:00:00 1970 From: r.sricharan@ti.com (Sricharan R) Date: Tue, 6 May 2014 19:26:18 +0530 Subject: [PATCH V5 2/3] arm: dts: dra7: Replace peripheral interrupt numbers with crossbar inputs In-Reply-To: <1399384579-25620-1-git-send-email-r.sricharan@ti.com> References: <1399384579-25620-1-git-send-email-r.sricharan@ti.com> Message-ID: <1399384579-25620-3-git-send-email-r.sricharan@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Now with the crossbar IP in picture, the peripherals do not have the fixed interrupt lines. Instead they rely on the crossbar irqchip to allocate and map a free interrupt line to its crossbar input. So replacing all the peripheral interrupt numbers with its fixed crossbar input lines. Cc: Benoit Cousson Cc: Santosh Shilimkar Cc: Rajendra Nayak Cc: Tony Lindgren Signed-off-by: Sricharan R Signed-off-by: Nishanth Menon --- [V5] Rebased on 3.15-rc4 and replaced irqs numbers with crossbar numbers for new peripherals. arch/arm/boot/dts/dra7.dtsi | 100 +++++++++++++++++++++++-------------------- 1 file changed, 54 insertions(+), 46 deletions(-) diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 0274a86..52e4bd0 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -106,8 +106,8 @@ ti,hwmods = "l3_main_1", "l3_main_2"; reg = <0x44000000 0x2000>, <0x44800000 0x3000>; - interrupts = , - ; + interrupts = , + ; prm: prm at 4ae06000 { compatible = "ti,dra7-prm"; @@ -182,10 +182,10 @@ sdma: dma-controller at 4a056000 { compatible = "ti,omap4430-sdma"; reg = <0x4a056000 0x1000>; - interrupts = , - , - , - ; + interrupts = , + , + , + ; #dma-cells = <1>; #dma-channels = <32>; #dma-requests = <127>; @@ -194,7 +194,7 @@ gpio1: gpio at 4ae10000 { compatible = "ti,omap4-gpio"; reg = <0x4ae10000 0x200>; - interrupts = ; + interrupts = ; ti,hwmods = "gpio1"; gpio-controller; #gpio-cells = <2>; @@ -205,7 +205,7 @@ gpio2: gpio at 48055000 { compatible = "ti,omap4-gpio"; reg = <0x48055000 0x200>; - interrupts = ; + interrupts = ; ti,hwmods = "gpio2"; gpio-controller; #gpio-cells = <2>; @@ -216,7 +216,7 @@ gpio3: gpio at 48057000 { compatible = "ti,omap4-gpio"; reg = <0x48057000 0x200>; - interrupts = ; + interrupts = ; ti,hwmods = "gpio3"; gpio-controller; #gpio-cells = <2>; @@ -227,7 +227,7 @@ gpio4: gpio at 48059000 { compatible = "ti,omap4-gpio"; reg = <0x48059000 0x200>; - interrupts = ; + interrupts = ; ti,hwmods = "gpio4"; gpio-controller; #gpio-cells = <2>; @@ -238,7 +238,7 @@ gpio5: gpio at 4805b000 { compatible = "ti,omap4-gpio"; reg = <0x4805b000 0x200>; - interrupts = ; + interrupts = ; ti,hwmods = "gpio5"; gpio-controller; #gpio-cells = <2>; @@ -249,7 +249,7 @@ gpio6: gpio at 4805d000 { compatible = "ti,omap4-gpio"; reg = <0x4805d000 0x200>; - interrupts = ; + interrupts = ; ti,hwmods = "gpio6"; gpio-controller; #gpio-cells = <2>; @@ -260,7 +260,7 @@ gpio7: gpio at 48051000 { compatible = "ti,omap4-gpio"; reg = <0x48051000 0x200>; - interrupts = ; + interrupts = ; ti,hwmods = "gpio7"; gpio-controller; #gpio-cells = <2>; @@ -271,7 +271,7 @@ gpio8: gpio at 48053000 { compatible = "ti,omap4-gpio"; reg = <0x48053000 0x200>; - interrupts = ; + interrupts = ; ti,hwmods = "gpio8"; gpio-controller; #gpio-cells = <2>; @@ -282,7 +282,7 @@ uart1: serial at 4806a000 { compatible = "ti,omap4-uart"; reg = <0x4806a000 0x100>; - interrupts = ; + interrupts = ; ti,hwmods = "uart1"; clock-frequency = <48000000>; status = "disabled"; @@ -291,7 +291,7 @@ uart2: serial at 4806c000 { compatible = "ti,omap4-uart"; reg = <0x4806c000 0x100>; - interrupts = ; + interrupts = ; ti,hwmods = "uart2"; clock-frequency = <48000000>; status = "disabled"; @@ -300,7 +300,7 @@ uart3: serial at 48020000 { compatible = "ti,omap4-uart"; reg = <0x48020000 0x100>; - interrupts = ; + interrupts = ; ti,hwmods = "uart3"; clock-frequency = <48000000>; status = "disabled"; @@ -309,7 +309,7 @@ uart4: serial at 4806e000 { compatible = "ti,omap4-uart"; reg = <0x4806e000 0x100>; - interrupts = ; + interrupts = ; ti,hwmods = "uart4"; clock-frequency = <48000000>; status = "disabled"; @@ -318,7 +318,7 @@ uart5: serial at 48066000 { compatible = "ti,omap4-uart"; reg = <0x48066000 0x100>; - interrupts = ; + interrupts = ; ti,hwmods = "uart5"; clock-frequency = <48000000>; status = "disabled"; @@ -327,7 +327,7 @@ uart6: serial at 48068000 { compatible = "ti,omap4-uart"; reg = <0x48068000 0x100>; - interrupts = ; + interrupts = ; ti,hwmods = "uart6"; clock-frequency = <48000000>; status = "disabled"; @@ -336,6 +336,7 @@ uart7: serial at 48420000 { compatible = "ti,omap4-uart"; reg = <0x48420000 0x100>; + interrupts = ; ti,hwmods = "uart7"; clock-frequency = <48000000>; status = "disabled"; @@ -344,6 +345,7 @@ uart8: serial at 48422000 { compatible = "ti,omap4-uart"; reg = <0x48422000 0x100>; + interrupts = ; ti,hwmods = "uart8"; clock-frequency = <48000000>; status = "disabled"; @@ -352,6 +354,7 @@ uart9: serial at 48424000 { compatible = "ti,omap4-uart"; reg = <0x48424000 0x100>; + interrupts = ; ti,hwmods = "uart9"; clock-frequency = <48000000>; status = "disabled"; @@ -360,6 +363,7 @@ uart10: serial at 4ae2b000 { compatible = "ti,omap4-uart"; reg = <0x4ae2b000 0x100>; + interrupts = ; ti,hwmods = "uart10"; clock-frequency = <48000000>; status = "disabled"; @@ -368,7 +372,7 @@ timer1: timer at 4ae18000 { compatible = "ti,omap5430-timer"; reg = <0x4ae18000 0x80>; - interrupts = ; + interrupts = ; ti,hwmods = "timer1"; ti,timer-alwon; }; @@ -376,28 +380,28 @@ timer2: timer at 48032000 { compatible = "ti,omap5430-timer"; reg = <0x48032000 0x80>; - interrupts = ; + interrupts = ; ti,hwmods = "timer2"; }; timer3: timer at 48034000 { compatible = "ti,omap5430-timer"; reg = <0x48034000 0x80>; - interrupts = ; + interrupts = ; ti,hwmods = "timer3"; }; timer4: timer at 48036000 { compatible = "ti,omap5430-timer"; reg = <0x48036000 0x80>; - interrupts = ; + interrupts = ; ti,hwmods = "timer4"; }; timer5: timer at 48820000 { compatible = "ti,omap5430-timer"; reg = <0x48820000 0x80>; - interrupts = ; + interrupts = ; ti,hwmods = "timer5"; ti,timer-dsp; }; @@ -405,7 +409,7 @@ timer6: timer at 48822000 { compatible = "ti,omap5430-timer"; reg = <0x48822000 0x80>; - interrupts = ; + interrupts = ; ti,hwmods = "timer6"; ti,timer-dsp; ti,timer-pwm; @@ -414,7 +418,7 @@ timer7: timer at 48824000 { compatible = "ti,omap5430-timer"; reg = <0x48824000 0x80>; - interrupts = ; + interrupts = ; ti,hwmods = "timer7"; ti,timer-dsp; }; @@ -422,7 +426,7 @@ timer8: timer at 48826000 { compatible = "ti,omap5430-timer"; reg = <0x48826000 0x80>; - interrupts = ; + interrupts = ; ti,hwmods = "timer8"; ti,timer-dsp; ti,timer-pwm; @@ -431,21 +435,21 @@ timer9: timer at 4803e000 { compatible = "ti,omap5430-timer"; reg = <0x4803e000 0x80>; - interrupts = ; + interrupts = ; ti,hwmods = "timer9"; }; timer10: timer at 48086000 { compatible = "ti,omap5430-timer"; reg = <0x48086000 0x80>; - interrupts = ; + interrupts = ; ti,hwmods = "timer10"; }; timer11: timer at 48088000 { compatible = "ti,omap5430-timer"; reg = <0x48088000 0x80>; - interrupts = ; + interrupts = ; ti,hwmods = "timer11"; ti,timer-pwm; }; @@ -453,6 +457,7 @@ timer13: timer at 48828000 { compatible = "ti,omap5430-timer"; reg = <0x48828000 0x80>; + interrupts = ; ti,hwmods = "timer13"; status = "disabled"; }; @@ -460,6 +465,7 @@ timer14: timer at 4882a000 { compatible = "ti,omap5430-timer"; reg = <0x4882a000 0x80>; + interrupts = ; ti,hwmods = "timer14"; status = "disabled"; }; @@ -467,6 +473,7 @@ timer15: timer at 4882c000 { compatible = "ti,omap5430-timer"; reg = <0x4882c000 0x80>; + interrupts = ; ti,hwmods = "timer15"; status = "disabled"; }; @@ -474,6 +481,7 @@ timer16: timer at 4882e000 { compatible = "ti,omap5430-timer"; reg = <0x4882e000 0x80>; + interrupts = ; ti,hwmods = "timer16"; status = "disabled"; }; @@ -481,7 +489,7 @@ wdt2: wdt at 4ae14000 { compatible = "ti,omap4-wdt"; reg = <0x4ae14000 0x80>; - interrupts = ; + interrupts = ; ti,hwmods = "wd_timer2"; }; @@ -495,14 +503,14 @@ dmm at 4e000000 { compatible = "ti,omap5-dmm"; reg = <0x4e000000 0x800>; - interrupts = <0 113 0x4>; + interrupts = ; ti,hwmods = "dmm"; }; i2c1: i2c at 48070000 { compatible = "ti,omap4-i2c"; reg = <0x48070000 0x100>; - interrupts = ; + interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c1"; @@ -512,7 +520,7 @@ i2c2: i2c at 48072000 { compatible = "ti,omap4-i2c"; reg = <0x48072000 0x100>; - interrupts = ; + interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c2"; @@ -522,7 +530,7 @@ i2c3: i2c at 48060000 { compatible = "ti,omap4-i2c"; reg = <0x48060000 0x100>; - interrupts = ; + interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c3"; @@ -532,7 +540,7 @@ i2c4: i2c at 4807a000 { compatible = "ti,omap4-i2c"; reg = <0x4807a000 0x100>; - interrupts = ; + interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c4"; @@ -542,7 +550,7 @@ i2c5: i2c at 4807c000 { compatible = "ti,omap4-i2c"; reg = <0x4807c000 0x100>; - interrupts = ; + interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c5"; @@ -552,7 +560,7 @@ mmc1: mmc at 4809c000 { compatible = "ti,omap4-hsmmc"; reg = <0x4809c000 0x400>; - interrupts = ; + interrupts = ; ti,hwmods = "mmc1"; ti,dual-volt; ti,needs-special-reset; @@ -565,7 +573,7 @@ mmc2: mmc at 480b4000 { compatible = "ti,omap4-hsmmc"; reg = <0x480b4000 0x400>; - interrupts = ; + interrupts = ; ti,hwmods = "mmc2"; ti,needs-special-reset; dmas = <&sdma 47>, <&sdma 48>; @@ -576,7 +584,7 @@ mmc3: mmc at 480ad000 { compatible = "ti,omap4-hsmmc"; reg = <0x480ad000 0x400>; - interrupts = ; + interrupts = ; ti,hwmods = "mmc3"; ti,needs-special-reset; dmas = <&sdma 77>, <&sdma 78>; @@ -587,7 +595,7 @@ mmc4: mmc at 480d1000 { compatible = "ti,omap4-hsmmc"; reg = <0x480d1000 0x400>; - interrupts = ; + interrupts = ; ti,hwmods = "mmc4"; ti,needs-special-reset; dmas = <&sdma 57>, <&sdma 58>; @@ -730,7 +738,7 @@ mcspi1: spi at 48098000 { compatible = "ti,omap4-mcspi"; reg = <0x48098000 0x200>; - interrupts = ; + interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi1"; @@ -751,7 +759,7 @@ mcspi2: spi at 4809a000 { compatible = "ti,omap4-mcspi"; reg = <0x4809a000 0x200>; - interrupts = ; + interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi2"; @@ -767,7 +775,7 @@ mcspi3: spi at 480b8000 { compatible = "ti,omap4-mcspi"; reg = <0x480b8000 0x200>; - interrupts = ; + interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi3"; @@ -780,7 +788,7 @@ mcspi4: spi at 480ba000 { compatible = "ti,omap4-mcspi"; reg = <0x480ba000 0x200>; - interrupts = ; + interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi4"; -- 1.7.9.5