All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dolev Raviv <draviv@codeaurora.org>
To: James.Bottomley@HansenPartnership.com
Cc: linux-scsi@vger.kernel.org, linux-scsi-owner@vger.kernel.org,
	sthumma@codeaurora.org, linux-arm-msm@vger.kernel.org,
	Dolev Raviv <draviv@codeaurora.org>,
	Raviv Shvili <rshvili@codeaurora.org>
Subject: [PATCH V1 3/4] scsi: ufs: Logical Unit (LU) command queue depth
Date: Tue, 27 May 2014 10:21:51 +0300	[thread overview]
Message-ID: <1401175312-17753-4-git-send-email-draviv@codeaurora.org> (raw)
In-Reply-To: <1401175312-17753-1-git-send-email-draviv@codeaurora.org>

Some of the UFS devices may support different number of commands
that can be queued per LU. At the current implementation,
SW configure each of the UFS devices LU's according to the
controller capability.

In this patch the queue depth available per LU is read and updated in
the LU's SW structure.

Signed-off-by: Dolev Raviv <draviv@codeaurora.org>
Signed-off-by: Raviv Shvili <rshvili@codeaurora.org>
---
 drivers/scsi/ufs/ufs.h    | 21 +++++++++++++++++++++
 drivers/scsi/ufs/ufshcd.c | 45 ++++++++++++++++++++++++++++++++++++++++++++-
 2 files changed, 65 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h
index 1545cd7..fafcf5e 100644
--- a/drivers/scsi/ufs/ufs.h
+++ b/drivers/scsi/ufs/ufs.h
@@ -132,6 +132,27 @@ enum desc_idn {
 	QUERY_DESC_IDN_RFU_2		= 0x9,
 };
 
+#define UNIT_DESC_MAX_SIZE       0x22
+/* Unit descriptor parameters offsets in bytes*/
+enum unit_desc_param {
+	UNIT_DESC_PARAM_LEN			= 0x0,
+	UNIT_DESC_PARAM_TYPE			= 0x1,
+	UNIT_DESC_PARAM_UNIT_INDEX		= 0x2,
+	UNIT_DESC_PARAM_LU_ENABLE		= 0x3,
+	UNIT_DESC_PARAM_BOOT_LUN_ID		= 0x4,
+	UNIT_DESC_PARAM_LU_WR_PROTECT		= 0x5,
+	UNIT_DESC_PARAM_LU_Q_DEPTH		= 0x6,
+	UNIT_DESC_PARAM_MEM_TYPE		= 0x8,
+	UNIT_DESC_PARAM_DATA_RELIABILITY	= 0x9,
+	UNIT_DESC_PARAM_LOGICAL_BLK_SIZE	= 0xA,
+	UNIT_DESC_PARAM_LOGICAL_BLK_COUNT	= 0xB,
+	UNIT_DESC_PARAM_ERASE_BLK_SIZE		= 0x13,
+	UNIT_DESC_PARAM_PROVISIONING_TYPE	= 0x17,
+	UNIT_DESC_PARAM_PHY_MEM_RSRC_CNT	= 0x18,
+	UNIT_DESC_PARAM_CTX_CAPABILITIES	= 0x20,
+	UNIT_DESC_PARAM_LARGE_UNIT_SIZE_M1	= 0x22,
+};
+
 /* Exception event mask values */
 enum {
 	MASK_EE_STATUS		= 0xFFFF,
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index f3768ec..b301ed8 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -110,6 +110,8 @@ static void ufshcd_tmc_handler(struct ufs_hba *hba);
 static void ufshcd_async_scan(void *data, async_cookie_t cookie);
 static int ufshcd_reset_and_restore(struct ufs_hba *hba);
 static int ufshcd_clear_tm_cmd(struct ufs_hba *hba, int tag);
+static int ufshcd_read_sdev_qdepth(struct ufs_hba *hba,
+					struct scsi_device *sdev);
 
 /*
  * ufshcd_wait_for_register - wait for register value to change
@@ -1978,6 +1980,7 @@ static int ufshcd_verify_dev_init(struct ufs_hba *hba)
 static int ufshcd_slave_alloc(struct scsi_device *sdev)
 {
 	struct ufs_hba *hba;
+	int lun_qdepth;
 
 	hba = shost_priv(sdev->host);
 	sdev->tagged_supported = 1;
@@ -1988,6 +1991,14 @@ static int ufshcd_slave_alloc(struct scsi_device *sdev)
 
 	/* allow SCSI layer to restart the device in case of errors */
 	sdev->allow_restart = 1;
+	lun_qdepth = ufshcd_read_sdev_qdepth(hba, sdev);
+	if (lun_qdepth == 0 || lun_qdepth > hba->nutrs) {
+		dev_info(hba->dev, "%s, lun %d queue depth is %d\n", __func__,
+				sdev->lun, lun_qdepth);
+		lun_qdepth = hba->nutrs;
+	} else if (lun_qdepth < 0) {
+		lun_qdepth = 1;
+	}
 
 	/*
 	 * Inform SCSI Midlayer that the LUN queue depth is same as the
@@ -1996,7 +2007,7 @@ static int ufshcd_slave_alloc(struct scsi_device *sdev)
 	 * SAM_STAT_TASK_SET_FULL, the LUN queue depth will be adjusted
 	 * with scsi_adjust_queue_depth.
 	 */
-	scsi_activate_tcq(sdev, hba->nutrs);
+	scsi_activate_tcq(sdev, lun_qdepth);
 	return 0;
 }
 
@@ -3071,6 +3082,38 @@ static int ufshcd_eh_host_reset_handler(struct scsi_cmnd *cmd)
 }
 
 /**
+ * ufshcd_read_sdev_qdepth - read the lun command queue depth
+ * @hba: Pointer to adapter instance
+ * @sdev: pointer to SCSI device
+ *
+ * Return in case of success the lun's queue depth else error.
+ */
+static int ufshcd_read_sdev_qdepth(struct ufs_hba *hba,
+				struct scsi_device *sdev)
+{
+	int ret;
+	int buff_len = UNIT_DESC_MAX_SIZE;
+	u8 desc_buf[UNIT_DESC_MAX_SIZE];
+
+	ret = ufshcd_query_descriptor(hba, UPIU_QUERY_OPCODE_READ_DESC,
+			QUERY_DESC_IDN_UNIT, sdev->lun, 0, desc_buf, &buff_len);
+
+	if (ret || (buff_len < UNIT_DESC_PARAM_LU_Q_DEPTH)) {
+		dev_err(hba->dev,
+			"%s:Failed reading unit descriptor. len = %d ret = %d"
+			, __func__, buff_len, ret);
+		if (!ret)
+			ret = -EINVAL;
+
+		goto out;
+	}
+
+	ret = desc_buf[UNIT_DESC_PARAM_LU_Q_DEPTH] & 0xFF;
+out:
+	return ret;
+}
+
+/**
  * ufshcd_async_scan - asynchronous execution for link startup
  * @data: data pointer to pass to this function
  * @cookie: cookie data
-- 
1.8.5.2

-- 
QUALCOMM ISRAEL, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

  parent reply	other threads:[~2014-05-27  7:23 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-05-27  7:21 [PATCH V1 0/4] LU queue depth manament Dolev Raviv
2014-05-27  7:21 ` [PATCH V1 1/4] scsi: ufs: query descriptor API Dolev Raviv
2014-06-04  3:31   ` Santosh Y
2014-05-27  7:21 ` [PATCH V1 2/4] scsi: ufs: device query status and size check Dolev Raviv
2014-06-04  3:31   ` Santosh Y
2014-05-27  7:21 ` Dolev Raviv [this message]
2014-06-04  3:31   ` [PATCH V1 3/4] scsi: ufs: Logical Unit (LU) command queue depth Santosh Y
2014-05-27  7:21 ` [PATCH V1 4/4] scsi: ufs: Fix queue depth handling for best effort cases Dolev Raviv
2014-06-04  3:31   ` Santosh Y

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1401175312-17753-4-git-send-email-draviv@codeaurora.org \
    --to=draviv@codeaurora.org \
    --cc=James.Bottomley@HansenPartnership.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-scsi-owner@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=rshvili@codeaurora.org \
    --cc=sthumma@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.