All of lore.kernel.org
 help / color / mirror / Atom feed
From: Peter Meerwald <pmeerw@pmeerw.net>
To: linux-iio@vger.kernel.org
Cc: jic23@kernel.org, Peter Meerwald <pmeerw@pmeerw.net>
Subject: [PATCH v3 05/12] iio:adc:ad799x: Use BIT() and GENMASK()
Date: Thu, 12 Jun 2014 06:54:09 +0200	[thread overview]
Message-ID: <1402548856-3564-6-git-send-email-pmeerw@pmeerw.net> (raw)
In-Reply-To: <1402548856-3564-1-git-send-email-pmeerw@pmeerw.net>

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
---
 drivers/iio/adc/ad799x.c | 31 +++++++++++++++----------------
 1 file changed, 15 insertions(+), 16 deletions(-)

diff --git a/drivers/iio/adc/ad799x.c b/drivers/iio/adc/ad799x.c
index 878400c..b3799a8 100644
--- a/drivers/iio/adc/ad799x.c
+++ b/drivers/iio/adc/ad799x.c
@@ -32,6 +32,7 @@
 #include <linux/types.h>
 #include <linux/err.h>
 #include <linux/module.h>
+#include <linux/bitops.h>
 
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
@@ -41,7 +42,7 @@
 #include <linux/iio/triggered_buffer.h>
 
 #define AD799X_CHANNEL_SHIFT			4
-#define AD799X_STORAGEBITS			16
+
 /*
  * AD7991, AD7995 and AD7999 defines
  */
@@ -55,10 +56,10 @@
  * AD7992, AD7993, AD7994, AD7997 and AD7998 defines
  */
 
-#define AD7998_FLTR				0x08
-#define AD7998_ALERT_EN				0x04
-#define AD7998_BUSY_ALERT			0x02
-#define AD7998_BUSY_ALERT_POL			0x01
+#define AD7998_FLTR				BIT(3)
+#define AD7998_ALERT_EN				BIT(2)
+#define AD7998_BUSY_ALERT			BIT(1)
+#define AD7998_BUSY_ALERT_POL			BIT(0)
 
 #define AD7998_CONV_RES_REG			0x0
 #define AD7998_ALERT_STAT_REG			0x1
@@ -69,7 +70,7 @@
 #define AD7998_DATAHIGH_REG(x)			((x) * 3 + 0x5)
 #define AD7998_HYST_REG(x)			((x) * 3 + 0x6)
 
-#define AD7998_CYC_MASK				0x7
+#define AD7998_CYC_MASK				GENMASK(2, 0)
 #define AD7998_CYC_DIS				0x0
 #define AD7998_CYC_TCONF_32			0x1
 #define AD7998_CYC_TCONF_64			0x2
@@ -85,10 +86,8 @@
  * AD7997 and AD7997 defines
  */
 
-#define AD7997_8_READ_SINGLE			0x80
-#define AD7997_8_READ_SEQUENCE			0x70
-/* TODO: move this into a common header */
-#define RES_MASK(bits)	((1 << (bits)) - 1)
+#define AD7997_8_READ_SINGLE			BIT(7)
+#define AD7997_8_READ_SEQUENCE			(BIT(6) | BIT(5) | BIT(4))
 
 enum {
 	ad7991,
@@ -205,12 +204,12 @@ static int ad799x_scan_direct(struct ad799x_state *st, unsigned ch)
 	case ad7991:
 	case ad7995:
 	case ad7999:
-		cmd = st->config | ((1 << ch) << AD799X_CHANNEL_SHIFT);
+		cmd = st->config | (BIT(ch) << AD799X_CHANNEL_SHIFT);
 		break;
 	case ad7992:
 	case ad7993:
 	case ad7994:
-		cmd = (1 << ch) << AD799X_CHANNEL_SHIFT;
+		cmd = BIT(ch) << AD799X_CHANNEL_SHIFT;
 		break;
 	case ad7997:
 	case ad7998:
@@ -244,7 +243,7 @@ static int ad799x_read_raw(struct iio_dev *indio_dev,
 		if (ret < 0)
 			return ret;
 		*val = (ret >> chan->scan_type.shift) &
-			RES_MASK(chan->scan_type.realbits);
+			GENMASK(chan->scan_type.realbits - 1, 0);
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_SCALE:
 		ret = regulator_get_voltage(st->vref);
@@ -359,7 +358,7 @@ static int ad799x_write_event_value(struct iio_dev *indio_dev,
 	int ret;
 	struct ad799x_state *st = iio_priv(indio_dev);
 
-	if (val < 0 || val > RES_MASK(chan->scan_type.realbits))
+	if (val < 0 || val > GENMASK(chan->scan_type.realbits - 1, 0))
 		return -EINVAL;
 
 	mutex_lock(&indio_dev->mlock);
@@ -388,7 +387,7 @@ static int ad799x_read_event_value(struct iio_dev *indio_dev,
 	if (ret < 0)
 		return ret;
 	*val = (ret >> chan->scan_type.shift) &
-		RES_MASK(chan->scan_type.realbits);
+		GENMASK(chan->scan_type.realbits - 1 , 0);
 
 	return IIO_VAL_INT;
 }
@@ -408,7 +407,7 @@ static irqreturn_t ad799x_event_handler(int irq, void *private)
 		goto done;
 
 	for (i = 0; i < 8; i++) {
-		if (ret & (1 << i))
+		if (ret & BIT(i))
 			iio_push_event(indio_dev,
 				       i & 0x1 ?
 				       IIO_UNMOD_EVENT_CODE(IIO_VOLTAGE,
-- 
1.9.1


  parent reply	other threads:[~2014-06-12  4:54 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-06-12  4:54 [PATCH v3 00/12] ad799x cleanup Peter Meerwald
2014-06-12  4:54 ` [PATCH v3 01/12] iio:adc:ad799x: Fix reading and writing of event values, apply shift Peter Meerwald
2014-06-12  8:07   ` Lars-Peter Clausen
2014-06-14 14:19     ` Jonathan Cameron
2014-06-29 14:47       ` Jonathan Cameron
2014-06-12  4:54 ` [PATCH v3 02/12] iio:adc:ad799x: Fix ad799x_chip_info kerneldoc Peter Meerwald
2014-06-14 14:21   ` Jonathan Cameron
2014-06-12  4:54 ` [PATCH v3 03/12] iio:adc:ad799x: Drop I2C access helper functions Peter Meerwald
2014-06-12  8:10   ` Lars-Peter Clausen
2014-06-14 14:26     ` Jonathan Cameron
2014-07-13 20:47     ` Jonathan Cameron
2014-06-12  4:54 ` [PATCH v3 04/12] iio:adc:ad799x: Save some lines in ad7997_8_update_scan_mode() exit handling Peter Meerwald
2014-07-13 20:56   ` Jonathan Cameron
2014-06-12  4:54 ` Peter Meerwald [this message]
2014-07-13 20:56   ` [PATCH v3 05/12] iio:adc:ad799x: Use BIT() and GENMASK() Jonathan Cameron
2014-06-12  4:54 ` [PATCH v3 06/12] iio:adc:ad799x: Only expose event interface when IRQ is available Peter Meerwald
2014-07-13 20:56   ` Jonathan Cameron
2014-06-12  4:54 ` [PATCH v3 07/12] iio:adc:ad799x: Make chan_spec const in ad799x_chip_config struct Peter Meerwald
2014-07-13 20:57   ` Jonathan Cameron
2014-06-12  4:54 ` [PATCH v3 08/12] iio:adc:ad799x: Add helper function to read/write config register Peter Meerwald
2014-07-13 20:57   ` Jonathan Cameron
2014-06-12  4:54 ` [PATCH v3 09/12] iio:adc:ad799x: Write default config on probe and reset alert status on probe Peter Meerwald
2014-07-13 20:58   ` Jonathan Cameron
2014-06-12  4:54 ` [PATCH v3 10/12] iio:adc:ad799x: Set conversion channels and rename ad7997_8_update_scan_mode() Peter Meerwald
2014-07-13 20:58   ` Jonathan Cameron
2014-06-12  4:54 ` [PATCH v3 11/12] iio:adc:ad799x: Return more meaningful event enabled state Peter Meerwald
2014-06-12  8:08   ` Lars-Peter Clausen
2014-07-13 20:59     ` Jonathan Cameron
2014-06-12  4:54 ` [PATCH v3 12/12] iio:adc:ad799x: Allow to write event config Peter Meerwald
2014-06-12  8:08   ` Lars-Peter Clausen
2014-07-13 21:01     ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1402548856-3564-6-git-send-email-pmeerw@pmeerw.net \
    --to=pmeerw@pmeerw.net \
    --cc=jic23@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.