All of lore.kernel.org
 help / color / mirror / Atom feed
From: greearb@candelatech.com
To: netdev@vger.kernel.org
Cc: Ben Greear <greearb@candelatech.com>
Subject: [PATCH v2 1/2] ipv6:  Add more debugging around accept-ra logic.
Date: Tue, 24 Jun 2014 14:14:47 -0700	[thread overview]
Message-ID: <1403644488-21709-1-git-send-email-greearb@candelatech.com> (raw)

From: Ben Greear <greearb@candelatech.com>

This is disabled by default, just like similar debug info
already in this module.  But, makes it easier to find out
why RA is not being accepted when debugging strange behaviour.

Signed-off-by: Ben Greear <greearb@candelatech.com>
---

v2: No changes since last time.  Patch is against 3.14.8+

 net/ipv6/ndisc.c | 51 +++++++++++++++++++++++++++++++++++++++++++--------
 1 file changed, 43 insertions(+), 8 deletions(-)

diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c
index 09a22f4..2fef3d5 100644
--- a/net/ipv6/ndisc.c
+++ b/net/ipv6/ndisc.c
@@ -1073,6 +1073,9 @@ static void ndisc_router_discovery(struct sk_buff *skb)
 	optlen = (skb_tail_pointer(skb) - skb_transport_header(skb)) -
 		sizeof(struct ra_msg);
 
+	ND_PRINTK(2, info,
+		  "RA: %s, dev: %s\n",
+		  __func__, skb->dev->name);
 	if (!(ipv6_addr_type(&ipv6_hdr(skb)->saddr) & IPV6_ADDR_LINKLOCAL)) {
 		ND_PRINTK(2, warn, "RA: source address is not link-local\n");
 		return;
@@ -1105,13 +1108,21 @@ static void ndisc_router_discovery(struct sk_buff *skb)
 		return;
 	}
 
-	if (!ipv6_accept_ra(in6_dev))
+	if (!ipv6_accept_ra(in6_dev)) {
+		ND_PRINTK(2, info,
+			  "RA: %s, did not accept ra for dev: %s\n",
+			  __func__, skb->dev->name);
 		goto skip_linkparms;
+	}
 
 #ifdef CONFIG_IPV6_NDISC_NODETYPE
 	/* skip link-specific parameters from interior routers */
-	if (skb->ndisc_nodetype == NDISC_NODETYPE_NODEFAULT)
+	if (skb->ndisc_nodetype == NDISC_NODETYPE_NODEFAULT) {
+		ND_PRINTK(2, info,
+			  "RA: %s, nodetype is NODEFAULT, dev: %s\n",
+			  __func__, skb->dev->name);
 		goto skip_linkparms;
+	}
 #endif
 
 	if (in6_dev->if_flags & IF_RS_SENT) {
@@ -1133,11 +1144,20 @@ static void ndisc_router_discovery(struct sk_buff *skb)
 				(ra_msg->icmph.icmp6_addrconf_other ?
 					IF_RA_OTHERCONF : 0);
 
-	if (!in6_dev->cnf.accept_ra_defrtr)
+	if (!in6_dev->cnf.accept_ra_defrtr) {
+		ND_PRINTK(2, info,
+			  "RA: %s, defrtr is false for dev: %s\n",
+			  __func__, skb->dev->name);
 		goto skip_defrtr;
+	}
 
-	if (ipv6_chk_addr(dev_net(in6_dev->dev), &ipv6_hdr(skb)->saddr, NULL, 0))
+	if (ipv6_chk_addr(dev_net(in6_dev->dev), &ipv6_hdr(skb)->saddr,
+			  NULL, 0)) {
+		ND_PRINTK(2, info,
+			  "RA: %s, chk_addr failed for dev: %s\n",
+			  __func__, skb->dev->name);
 		goto skip_defrtr;
+	}
 
 	lifetime = ntohs(ra_msg->icmph.icmp6_rt_lifetime);
 
@@ -1166,8 +1186,10 @@ static void ndisc_router_discovery(struct sk_buff *skb)
 		rt = NULL;
 	}
 
+	ND_PRINTK(3, info, "RA: rt: %p  lifetime: %d, for dev: %s\n",
+		  rt, lifetime, skb->dev->name);
 	if (rt == NULL && lifetime) {
-		ND_PRINTK(3, dbg, "RA: adding default router\n");
+		ND_PRINTK(3, info, "RA: adding default router\n");
 
 		rt = rt6_add_dflt_router(&ipv6_hdr(skb)->saddr, skb->dev, pref);
 		if (rt == NULL) {
@@ -1263,12 +1285,21 @@ skip_linkparms:
 			     NEIGH_UPDATE_F_ISROUTER);
 	}
 
-	if (!ipv6_accept_ra(in6_dev))
+	if (!ipv6_accept_ra(in6_dev)) {
+		ND_PRINTK(2, info,
+			  "RA: %s, accept_ra is false for dev: %s\n",
+			  __func__, skb->dev->name);
 		goto out;
+	}
 
 #ifdef CONFIG_IPV6_ROUTE_INFO
-	if (ipv6_chk_addr(dev_net(in6_dev->dev), &ipv6_hdr(skb)->saddr, NULL, 0))
+	if (ipv6_chk_addr(dev_net(in6_dev->dev), &ipv6_hdr(skb)->saddr,
+			  NULL, 0)) {
+		ND_PRINTK(2, info,
+			  "RA: %s, chk-addr (route info) is false for dev: %s\n",
+			  __func__, skb->dev->name);
 		goto skip_routeinfo;
+	}
 
 	if (in6_dev->cnf.accept_ra_rtr_pref && ndopts.nd_opts_ri) {
 		struct nd_opt_hdr *p;
@@ -1296,8 +1327,12 @@ skip_routeinfo:
 
 #ifdef CONFIG_IPV6_NDISC_NODETYPE
 	/* skip link-specific ndopts from interior routers */
-	if (skb->ndisc_nodetype == NDISC_NODETYPE_NODEFAULT)
+	if (skb->ndisc_nodetype == NDISC_NODETYPE_NODEFAULT) {
+		ND_PRINTK(2, info,
+			  "RA: %s, nodetype is NODEFAULT (interior routes), dev: %s\n",
+			  __func__, skb->dev->name);
 		goto out;
+	}
 #endif
 
 	if (in6_dev->cnf.accept_ra_pinfo && ndopts.nd_opts_pi) {
-- 
1.7.11.7

             reply	other threads:[~2014-06-24 21:14 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-06-24 21:14 greearb [this message]
2014-06-24 21:14 ` [PATCH v2 2/2] ipv6: Allow accepting RA from local IP addresses greearb
2014-06-24 22:22   ` YOSHIFUJI Hideaki
2014-06-25  3:19     ` Ben Greear
2014-06-25  8:48       ` Hannes Frederic Sowa
2014-06-26  0:49       ` YOSHIFUJI Hideaki/吉藤英明
2014-06-26  0:57         ` David Miller
2014-06-27  6:24         ` Hannes Frederic Sowa

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1403644488-21709-1-git-send-email-greearb@candelatech.com \
    --to=greearb@candelatech.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.