From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755109AbaFZHN1 (ORCPT ); Thu, 26 Jun 2014 03:13:27 -0400 Received: from bear.ext.ti.com ([192.94.94.41]:48373 "EHLO bear.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754973AbaFZHNY (ORCPT ); Thu, 26 Jun 2014 03:13:24 -0400 From: Sricharan R To: , , , CC: , , , , , , , , Subject: [PATCH V4 03/16] irqchip: crossbar: Introduce ti,irqs-skip to skip irqs that bypass crossbar Date: Thu, 26 Jun 2014 12:40:21 +0530 Message-ID: <1403766634-18543-4-git-send-email-r.sricharan@ti.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1403766634-18543-1-git-send-email-r.sricharan@ti.com> References: <1403766634-18543-1-git-send-email-r.sricharan@ti.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Nishanth Menon When, in the system due to varied reasons, interrupts might be unusable due to hardware behavior, but register maps do exist, then those interrupts should be skipped while mapping irq to crossbars. Signed-off-by: Nishanth Menon Signed-off-by: Sricharan R Acked-by: Santosh Shilimkar --- .../devicetree/bindings/arm/omap/crossbar.txt | 6 ++++++ drivers/irqchip/irq-crossbar.c | 20 ++++++++++++++++++++ 2 files changed, 26 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/omap/crossbar.txt b/Documentation/devicetree/bindings/arm/omap/crossbar.txt index fb88585..0795765 100644 --- a/Documentation/devicetree/bindings/arm/omap/crossbar.txt +++ b/Documentation/devicetree/bindings/arm/omap/crossbar.txt @@ -17,6 +17,11 @@ Required properties: so crossbar bar driver should not consider them as free lines. +Optional properties: +- ti,irqs-skip: This is similar to "ti,irqs-reserved", but these are for + SOC-specific hard-wiring of those irqs which unexpectedly bypasses the + crossbar. These irqs have a crossbar register, but still cannot be used. + Examples: crossbar_mpu: @4a020000 { compatible = "ti,irq-crossbar"; @@ -24,4 +29,5 @@ Examples: ti,max-irqs = <160>; ti,reg-size = <2>; ti,irqs-reserved = <0 1 2 3 5 6 131 132 139 140>; + ti,irqs-skip = <10 133 139 140>; }; diff --git a/drivers/irqchip/irq-crossbar.c b/drivers/irqchip/irq-crossbar.c index 51d4b87..0533a71 100644 --- a/drivers/irqchip/irq-crossbar.c +++ b/drivers/irqchip/irq-crossbar.c @@ -18,6 +18,7 @@ #define IRQ_FREE -1 #define IRQ_RESERVED -2 +#define IRQ_SKIP -3 #define GIC_IRQ_START 32 /* @@ -160,6 +161,25 @@ static int __init crossbar_of_init(struct device_node *node) } } + /* Skip irqs hardwired to bypass the crossbar */ + irqsr = of_get_property(node, "ti,irqs-skip", &size); + if (irqsr) { + size /= sizeof(__be32); + + for (i = 0; i < size; i++) { + of_property_read_u32_index(node, + "ti,irqs-skip", + i, &entry); + if (entry > max) { + pr_err("Invalid skip entry\n"); + ret = -EINVAL; + goto err3; + } + cb->irq_map[entry] = IRQ_SKIP; + } + } + + cb->register_offsets = kzalloc(max * sizeof(int), GFP_KERNEL); if (!cb->register_offsets) goto err3; -- 1.7.9.5 From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sricharan R Subject: [PATCH V4 03/16] irqchip: crossbar: Introduce ti,irqs-skip to skip irqs that bypass crossbar Date: Thu, 26 Jun 2014 12:40:21 +0530 Message-ID: <1403766634-18543-4-git-send-email-r.sricharan@ti.com> References: <1403766634-18543-1-git-send-email-r.sricharan@ti.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <1403766634-18543-1-git-send-email-r.sricharan-l0cyMroinI0@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org, santosh.shilimkar-l0cyMroinI0@public.gmane.org, nm-l0cyMroinI0@public.gmane.org, rnayak-l0cyMroinI0@public.gmane.org, linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org, r.sricharan-l0cyMroinI0@public.gmane.org, tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org, jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org, joe-6d6DIl74uiNBDgjK7y7TUQ@public.gmane.org List-Id: devicetree@vger.kernel.org From: Nishanth Menon When, in the system due to varied reasons, interrupts might be unusable due to hardware behavior, but register maps do exist, then those interrupts should be skipped while mapping irq to crossbars. Signed-off-by: Nishanth Menon Signed-off-by: Sricharan R Acked-by: Santosh Shilimkar --- .../devicetree/bindings/arm/omap/crossbar.txt | 6 ++++++ drivers/irqchip/irq-crossbar.c | 20 ++++++++++++++++++++ 2 files changed, 26 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/omap/crossbar.txt b/Documentation/devicetree/bindings/arm/omap/crossbar.txt index fb88585..0795765 100644 --- a/Documentation/devicetree/bindings/arm/omap/crossbar.txt +++ b/Documentation/devicetree/bindings/arm/omap/crossbar.txt @@ -17,6 +17,11 @@ Required properties: so crossbar bar driver should not consider them as free lines. +Optional properties: +- ti,irqs-skip: This is similar to "ti,irqs-reserved", but these are for + SOC-specific hard-wiring of those irqs which unexpectedly bypasses the + crossbar. These irqs have a crossbar register, but still cannot be used. + Examples: crossbar_mpu: @4a020000 { compatible = "ti,irq-crossbar"; @@ -24,4 +29,5 @@ Examples: ti,max-irqs = <160>; ti,reg-size = <2>; ti,irqs-reserved = <0 1 2 3 5 6 131 132 139 140>; + ti,irqs-skip = <10 133 139 140>; }; diff --git a/drivers/irqchip/irq-crossbar.c b/drivers/irqchip/irq-crossbar.c index 51d4b87..0533a71 100644 --- a/drivers/irqchip/irq-crossbar.c +++ b/drivers/irqchip/irq-crossbar.c @@ -18,6 +18,7 @@ #define IRQ_FREE -1 #define IRQ_RESERVED -2 +#define IRQ_SKIP -3 #define GIC_IRQ_START 32 /* @@ -160,6 +161,25 @@ static int __init crossbar_of_init(struct device_node *node) } } + /* Skip irqs hardwired to bypass the crossbar */ + irqsr = of_get_property(node, "ti,irqs-skip", &size); + if (irqsr) { + size /= sizeof(__be32); + + for (i = 0; i < size; i++) { + of_property_read_u32_index(node, + "ti,irqs-skip", + i, &entry); + if (entry > max) { + pr_err("Invalid skip entry\n"); + ret = -EINVAL; + goto err3; + } + cb->irq_map[entry] = IRQ_SKIP; + } + } + + cb->register_offsets = kzalloc(max * sizeof(int), GFP_KERNEL); if (!cb->register_offsets) goto err3; -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html From mboxrd@z Thu Jan 1 00:00:00 1970 From: r.sricharan@ti.com (Sricharan R) Date: Thu, 26 Jun 2014 12:40:21 +0530 Subject: [PATCH V4 03/16] irqchip: crossbar: Introduce ti, irqs-skip to skip irqs that bypass crossbar In-Reply-To: <1403766634-18543-1-git-send-email-r.sricharan@ti.com> References: <1403766634-18543-1-git-send-email-r.sricharan@ti.com> Message-ID: <1403766634-18543-4-git-send-email-r.sricharan@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Nishanth Menon When, in the system due to varied reasons, interrupts might be unusable due to hardware behavior, but register maps do exist, then those interrupts should be skipped while mapping irq to crossbars. Signed-off-by: Nishanth Menon Signed-off-by: Sricharan R Acked-by: Santosh Shilimkar --- .../devicetree/bindings/arm/omap/crossbar.txt | 6 ++++++ drivers/irqchip/irq-crossbar.c | 20 ++++++++++++++++++++ 2 files changed, 26 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/omap/crossbar.txt b/Documentation/devicetree/bindings/arm/omap/crossbar.txt index fb88585..0795765 100644 --- a/Documentation/devicetree/bindings/arm/omap/crossbar.txt +++ b/Documentation/devicetree/bindings/arm/omap/crossbar.txt @@ -17,6 +17,11 @@ Required properties: so crossbar bar driver should not consider them as free lines. +Optional properties: +- ti,irqs-skip: This is similar to "ti,irqs-reserved", but these are for + SOC-specific hard-wiring of those irqs which unexpectedly bypasses the + crossbar. These irqs have a crossbar register, but still cannot be used. + Examples: crossbar_mpu: @4a020000 { compatible = "ti,irq-crossbar"; @@ -24,4 +29,5 @@ Examples: ti,max-irqs = <160>; ti,reg-size = <2>; ti,irqs-reserved = <0 1 2 3 5 6 131 132 139 140>; + ti,irqs-skip = <10 133 139 140>; }; diff --git a/drivers/irqchip/irq-crossbar.c b/drivers/irqchip/irq-crossbar.c index 51d4b87..0533a71 100644 --- a/drivers/irqchip/irq-crossbar.c +++ b/drivers/irqchip/irq-crossbar.c @@ -18,6 +18,7 @@ #define IRQ_FREE -1 #define IRQ_RESERVED -2 +#define IRQ_SKIP -3 #define GIC_IRQ_START 32 /* @@ -160,6 +161,25 @@ static int __init crossbar_of_init(struct device_node *node) } } + /* Skip irqs hardwired to bypass the crossbar */ + irqsr = of_get_property(node, "ti,irqs-skip", &size); + if (irqsr) { + size /= sizeof(__be32); + + for (i = 0; i < size; i++) { + of_property_read_u32_index(node, + "ti,irqs-skip", + i, &entry); + if (entry > max) { + pr_err("Invalid skip entry\n"); + ret = -EINVAL; + goto err3; + } + cb->irq_map[entry] = IRQ_SKIP; + } + } + + cb->register_offsets = kzalloc(max * sizeof(int), GFP_KERNEL); if (!cb->register_offsets) goto err3; -- 1.7.9.5