All of lore.kernel.org
 help / color / mirror / Atom feed
From: hdegoede@redhat.com (Hans de Goede)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 2/4] pinctrl: sunxi: Move setting of mux to irq type from unmask to request_resources
Date: Sun, 29 Jun 2014 16:11:00 +0200	[thread overview]
Message-ID: <1404051062-24079-3-git-send-email-hdegoede@redhat.com> (raw)
In-Reply-To: <1404051062-24079-1-git-send-email-hdegoede@redhat.com>

With level triggered interrupt mask / unmask will get called for each
interrupt, doing the somewhat expensive mux setting on each unmask thus is
not a good idea. Instead add a request_resources callback and do it there.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
 drivers/pinctrl/sunxi/pinctrl-sunxi.c | 24 ++++++++++++++++--------
 1 file changed, 16 insertions(+), 8 deletions(-)

diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
index c199337..8bdd65b 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
@@ -531,6 +531,21 @@ static int sunxi_pinctrl_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
 	return irq_find_mapping(pctl->domain, desc->irqnum);
 }
 
+static int sunxi_pinctrl_irq_request_resources(struct irq_data *d)
+{
+	struct sunxi_pinctrl *pctl = irq_data_get_irq_chip_data(d);
+	struct sunxi_desc_function *func;
+
+	func = sunxi_pinctrl_desc_find_function_by_pin(pctl,
+					pctl->irq_array[d->hwirq], "irq");
+	if (!func)
+		return -EINVAL;
+
+	/* Change muxing to INT mode */
+	sunxi_pmx_set(pctl->pctl_dev, pctl->irq_array[d->hwirq], func->muxval);
+
+	return 0;
+}
 
 static int sunxi_pinctrl_irq_set_type(struct irq_data *d,
 				      unsigned int type)
@@ -603,19 +618,11 @@ static void sunxi_pinctrl_irq_mask(struct irq_data *d)
 static void sunxi_pinctrl_irq_unmask(struct irq_data *d)
 {
 	struct sunxi_pinctrl *pctl = irq_data_get_irq_chip_data(d);
-	struct sunxi_desc_function *func;
 	u32 reg = sunxi_irq_ctrl_reg(d->hwirq);
 	u8 idx = sunxi_irq_ctrl_offset(d->hwirq);
 	unsigned long flags;
 	u32 val;
 
-	func = sunxi_pinctrl_desc_find_function_by_pin(pctl,
-						       pctl->irq_array[d->hwirq],
-						       "irq");
-
-	/* Change muxing to INT mode */
-	sunxi_pmx_set(pctl->pctl_dev, pctl->irq_array[d->hwirq], func->muxval);
-
 	spin_lock_irqsave(&pctl->lock, flags);
 
 	/* Unmask the IRQ */
@@ -629,6 +636,7 @@ static struct irq_chip sunxi_pinctrl_irq_chip = {
 	.irq_ack	= sunxi_pinctrl_irq_ack,
 	.irq_mask	= sunxi_pinctrl_irq_mask,
 	.irq_unmask	= sunxi_pinctrl_irq_unmask,
+	.irq_request_resources = sunxi_pinctrl_irq_request_resources,
 	.irq_set_type	= sunxi_pinctrl_irq_set_type,
 	.flags		= IRQCHIP_SKIP_SET_WAKE,
 };
-- 
2.0.0

  parent reply	other threads:[~2014-06-29 14:11 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-06-29 14:10 [PATCH v3 0/4] pinctrl: sunxi: Properly handle level triggered gpio irqs Hans de Goede
2014-06-29 14:10 ` [PATCH v3 1/4] pinctrl: sunxi: Add IRQCHIP_SKIP_SET_WAKE flag for pinctrl irq chip Hans de Goede
2014-07-04 21:32   ` Linus Walleij
2014-06-29 14:11 ` Hans de Goede [this message]
2014-07-04 21:33   ` [PATCH v3 2/4] pinctrl: sunxi: Move setting of mux to irq type from unmask to request_resources Linus Walleij
2014-06-29 14:11 ` [PATCH v3 3/4] pinctrl: sunxi: Properly handle level triggered gpio interrupts Hans de Goede
2014-07-01 14:41   ` Maxime Ripard
2014-07-04 21:35   ` Linus Walleij
2014-06-29 14:11 ` [PATCH v3 4/4] pinctrl: sunxi: Define enable / disable irq callbacks for level triggered irqs Hans de Goede
2014-07-01 14:45   ` Maxime Ripard
2014-07-04 21:39   ` Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1404051062-24079-3-git-send-email-hdegoede@redhat.com \
    --to=hdegoede@redhat.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.