All of lore.kernel.org
 help / color / mirror / Atom feed
From: Emmanuel Grumbach <egrumbach@gmail.com>
To: linux-wireless@vger.kernel.org
Cc: Andrei Otcheretianski <andrei.otcheretianski@intel.com>,
	Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Subject: [PATCH 33/40] iwlwifi: mvm: Reflect GO channel switch in NoA
Date: Sun,  6 Jul 2014 12:36:09 +0300	[thread overview]
Message-ID: <1404639376-3792-33-git-send-email-egrumbach@gmail.com> (raw)
In-Reply-To: <53B917DC.5050902@gmail.com>

From: Andrei Otcheretianski <andrei.otcheretianski@intel.com>

According to the spec, GO/AP should perform the channel switch just
before "beacon 0". However, since the exact timing isn't defined,
it may result in a sudden GO disappearance from the channel.
Prevent potential packet loss when performing the CS by scheduling
NoA time event and executing the channel switch flow when a notification
from fw is received.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/fw-api.h     |  3 ++
 drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c   | 41 +++++++++++----
 drivers/net/wireless/iwlwifi/mvm/mac80211.c   |  5 +-
 drivers/net/wireless/iwlwifi/mvm/mvm.h        | 12 +++++
 drivers/net/wireless/iwlwifi/mvm/time-event.c | 73 +++++++++++++++++++++++++++
 drivers/net/wireless/iwlwifi/mvm/time-event.h | 29 +++++++++++
 6 files changed, 153 insertions(+), 10 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
index 6c479de..99329ed 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api.h
@@ -538,6 +538,9 @@ enum iwl_time_event_type {
 	/* WiDi Sync Events */
 	TE_WIDI_TX_SYNC,
 
+	/* Channel Switch NoA */
+	TE_P2P_GO_CSA_NOA,
+
 	TE_MAX
 }; /* MAC_EVENT_TYPE_API_E_VER_1 */
 
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c b/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c
index 19bd696..a176d00 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c
@@ -67,6 +67,7 @@
 #include "iwl-prph.h"
 #include "fw-api.h"
 #include "mvm.h"
+#include "time-event.h"
 
 const u8 iwl_mvm_ac_to_tx_fifo[] = {
 	IWL_MVM_TX_FIFO_VO,
@@ -1200,6 +1201,35 @@ int iwl_mvm_mac_ctxt_remove(struct iwl_mvm *mvm, struct ieee80211_vif *vif)
 	return 0;
 }
 
+static void iwl_mvm_csa_count_down(struct iwl_mvm *mvm,
+				   struct ieee80211_vif *csa_vif, u32 gp2)
+{
+	struct iwl_mvm_vif *mvmvif =
+			iwl_mvm_vif_from_mac80211(csa_vif);
+
+	if (!ieee80211_csa_is_complete(csa_vif)) {
+		int c = ieee80211_csa_update_counter(csa_vif);
+
+		iwl_mvm_mac_ctxt_beacon_changed(mvm, csa_vif);
+		if (csa_vif->p2p &&
+		    !iwl_mvm_te_scheduled(&mvmvif->time_event_data) && gp2) {
+			u32 rel_time = (c + 1) *
+				       csa_vif->bss_conf.beacon_int -
+				       IWL_MVM_CHANNEL_SWITCH_TIME;
+			u32 apply_time = gp2 + rel_time * 1024;
+
+			iwl_mvm_schedule_csa_noa(mvm, csa_vif,
+						 IWL_MVM_CHANNEL_SWITCH_TIME -
+						 IWL_MVM_CHANNEL_SWITCH_MARGIN,
+						 apply_time);
+		}
+	} else if (!iwl_mvm_te_scheduled(&mvmvif->time_event_data)) {
+		/* we don't have CSA NoA scheduled yet, switch now */
+		ieee80211_csa_finish(csa_vif);
+		RCU_INIT_POINTER(mvm->csa_vif, NULL);
+	}
+}
+
 int iwl_mvm_rx_beacon_notif(struct iwl_mvm *mvm,
 			    struct iwl_rx_cmd_buffer *rxb,
 			    struct iwl_device_cmd *cmd)
@@ -1234,15 +1264,8 @@ int iwl_mvm_rx_beacon_notif(struct iwl_mvm *mvm,
 
 	csa_vif = rcu_dereference_protected(mvm->csa_vif,
 					    lockdep_is_held(&mvm->mutex));
-	if (unlikely(csa_vif && csa_vif->csa_active)) {
-		if (!ieee80211_csa_is_complete(csa_vif)) {
-			ieee80211_csa_update_counter(csa_vif);
-			iwl_mvm_mac_ctxt_beacon_changed(mvm, csa_vif);
-		} else {
-			ieee80211_csa_finish(csa_vif);
-			RCU_INIT_POINTER(mvm->csa_vif, NULL);
-		}
-	}
+	if (unlikely(csa_vif && csa_vif->csa_active))
+		iwl_mvm_csa_count_down(mvm, csa_vif, mvm->ap_last_beacon_gp2);
 
 	return 0;
 }
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index 984a1e7..4a0350f 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -1608,8 +1608,11 @@ static void iwl_mvm_stop_ap_ibss(struct ieee80211_hw *hw,
 	mutex_lock(&mvm->mutex);
 
 	/* Handle AP stop while in CSA */
-	if (rcu_access_pointer(mvm->csa_vif) == vif)
+	if (rcu_access_pointer(mvm->csa_vif) == vif) {
+		iwl_mvm_remove_time_event(mvm, mvmvif,
+					  &mvmvif->time_event_data);
 		RCU_INIT_POINTER(mvm->csa_vif, NULL);
+	}
 
 	mvmvif->ap_ibss_active = false;
 	mvm->ap_last_beacon_gp2 = 0;
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index 5bb42af..db496c5 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -83,6 +83,18 @@
 #define IWL_RSSI_OFFSET 50
 #define IWL_MVM_MISSED_BEACONS_THRESHOLD 8
 
+/*
+ * The CSA NoA is scheduled IWL_MVM_CHANNEL_SWITCH_TIME TUs before "beacon 0"
+ * TBTT. This value should be big enough to ensure that we switch in time.
+ */
+#define IWL_MVM_CHANNEL_SWITCH_TIME 40
+
+/*
+ * This value (in TUs) is used to fine tune the CSA NoA end time which should
+ * be just before "beacon 0" TBTT.
+ */
+#define IWL_MVM_CHANNEL_SWITCH_MARGIN 4
+
 enum iwl_mvm_tx_fifo {
 	IWL_MVM_TX_FIFO_BK = 0,
 	IWL_MVM_TX_FIFO_BE,
diff --git a/drivers/net/wireless/iwlwifi/mvm/time-event.c b/drivers/net/wireless/iwlwifi/mvm/time-event.c
index 80100f6..ae52613 100644
--- a/drivers/net/wireless/iwlwifi/mvm/time-event.c
+++ b/drivers/net/wireless/iwlwifi/mvm/time-event.c
@@ -138,6 +138,41 @@ static void iwl_mvm_roc_finished(struct iwl_mvm *mvm)
 	schedule_work(&mvm->roc_done_wk);
 }
 
+static void iwl_mvm_csa_noa_start(struct iwl_mvm *mvm)
+{
+	struct ieee80211_vif *csa_vif;
+
+	rcu_read_lock();
+
+	csa_vif = rcu_dereference(mvm->csa_vif);
+	if (!csa_vif || !csa_vif->csa_active)
+		goto out_unlock;
+
+	IWL_DEBUG_TE(mvm, "CSA NOA started\n");
+
+	/*
+	 * CSA NoA is started but we still have beacons to
+	 * transmit on the current channel.
+	 * So we just do nothing here and the switch
+	 * will be performed on the last TBTT.
+	 */
+	if (!ieee80211_csa_is_complete(csa_vif)) {
+		IWL_WARN(mvm, "CSA NOA started too early\n");
+		goto out_unlock;
+	}
+
+	ieee80211_csa_finish(csa_vif);
+
+	rcu_read_unlock();
+
+	RCU_INIT_POINTER(mvm->csa_vif, NULL);
+
+	return;
+
+out_unlock:
+	rcu_read_unlock();
+}
+
 static bool iwl_mvm_te_check_disconnect(struct iwl_mvm *mvm,
 					struct ieee80211_vif *vif,
 					const char *errmsg)
@@ -213,6 +248,14 @@ static void iwl_mvm_te_handle_notif(struct iwl_mvm *mvm,
 			set_bit(IWL_MVM_STATUS_ROC_RUNNING, &mvm->status);
 			iwl_mvm_ref(mvm, IWL_MVM_REF_ROC);
 			ieee80211_ready_on_channel(mvm->hw);
+		} else if (te_data->vif->type == NL80211_IFTYPE_AP) {
+			if (le32_to_cpu(notif->status))
+				iwl_mvm_csa_noa_start(mvm);
+			else
+				IWL_DEBUG_TE(mvm, "CSA NOA failed to start\n");
+
+			/* we don't need it anymore */
+			iwl_mvm_te_clear_data(mvm, te_data);
 		}
 	} else {
 		IWL_WARN(mvm, "Got TE with unknown action\n");
@@ -538,3 +581,33 @@ void iwl_mvm_stop_p2p_roc(struct iwl_mvm *mvm)
 
 	iwl_mvm_roc_finished(mvm);
 }
+
+int iwl_mvm_schedule_csa_noa(struct iwl_mvm *mvm,
+			      struct ieee80211_vif *vif,
+			      u32 duration, u32 apply_time)
+{
+	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
+	struct iwl_mvm_time_event_data *te_data = &mvmvif->time_event_data;
+	struct iwl_time_event_cmd time_cmd = {};
+
+	lockdep_assert_held(&mvm->mutex);
+
+	if (te_data->running) {
+		IWL_DEBUG_TE(mvm, "CS NOA is already scheduled\n");
+		return -EBUSY;
+	}
+
+	time_cmd.action = cpu_to_le32(FW_CTXT_ACTION_ADD);
+	time_cmd.id_and_color =
+		cpu_to_le32(FW_CMD_ID_AND_COLOR(mvmvif->id, mvmvif->color));
+	time_cmd.id = cpu_to_le32(TE_P2P_GO_CSA_NOA);
+	time_cmd.apply_time = cpu_to_le32(apply_time);
+	time_cmd.max_frags = TE_V2_FRAG_NONE;
+	time_cmd.duration = cpu_to_le32(duration);
+	time_cmd.repeat = 1;
+	time_cmd.interval = cpu_to_le32(1);
+	time_cmd.policy = cpu_to_le16(TE_V2_NOTIF_HOST_EVENT_START |
+				      TE_V2_ABSENCE);
+
+	return iwl_mvm_time_event_send_add(mvm, vif, te_data, &time_cmd);
+}
diff --git a/drivers/net/wireless/iwlwifi/mvm/time-event.h b/drivers/net/wireless/iwlwifi/mvm/time-event.h
index 4a61c8c..2f48a90 100644
--- a/drivers/net/wireless/iwlwifi/mvm/time-event.h
+++ b/drivers/net/wireless/iwlwifi/mvm/time-event.h
@@ -214,4 +214,33 @@ void iwl_mvm_te_clear_data(struct iwl_mvm *mvm,
 
 void iwl_mvm_roc_done_wk(struct work_struct *wk);
 
+/**
+ * iwl_mvm_schedule_csa_noa - request NoA for channel switch
+ * @mvm: the mvm component
+ * @vif: the virtual interface for which the channel switch is issued
+ * @duration: the duration of the NoA in TU.
+ * @apply_time: NoA start time in GP2.
+ *
+ * This function is used to schedule NoA time event and is used to perform
+ * the channel switch flow.
+ */
+int iwl_mvm_schedule_csa_noa(struct iwl_mvm *mvm,
+			     struct ieee80211_vif *vif,
+			     u32 duration, u32 apply_time);
+
+/**
+ * iwl_mvm_te_scheduled - check if the fw received the TE cmd
+ * @te_data: the time event data that corresponds to that time event
+ *
+ * This function returns true iff this TE is added to the fw.
+ */
+static inline bool
+iwl_mvm_te_scheduled(struct iwl_mvm_time_event_data *te_data)
+{
+	if (!te_data)
+		return false;
+
+	return !!te_data->uid;
+}
+
 #endif /* __time_event_h__ */
-- 
1.8.3.2


  parent reply	other threads:[~2014-07-06  9:37 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-07-06  9:33 pull request: iwlwifi-next 2014-07-06 Emmanuel Grumbach
2014-07-06  9:35 ` [PATCH 01/40] iwlwifi: fix naming mistake for the fw_monitor module parameter Emmanuel Grumbach
2014-07-06  9:35 ` [PATCH 02/40] iwlwifi: remove wrong comment about alignment in iwl-fw-error-dump.h Emmanuel Grumbach
2014-07-06  9:35 ` [PATCH 03/40] iwlwifi: mvm: don't collect logs in the interrupt thread Emmanuel Grumbach
2014-07-06  9:35 ` [PATCH 04/40] iwlwifi: mvm: kill iwl_mvm_fw_error_rxf_dump Emmanuel Grumbach
2014-07-06  9:35 ` [PATCH 05/40] iwlwifi: mvm: update layout of firmware error dump Emmanuel Grumbach
2014-07-06  9:35 ` [PATCH 06/40] iwlwifi: mvm: wait for d0i3 exit in add interface flow Emmanuel Grumbach
2014-07-06  9:35 ` [PATCH 07/40] iwlwifi: mvm: read the mac address in family 8000 Emmanuel Grumbach
2014-07-06  9:35 ` [PATCH 08/40] iwlwifi: rename iwl_fw_error_fw_mon to iwl_fw_error_dump_fw_mon Emmanuel Grumbach
2014-07-06  9:35 ` [PATCH 09/40] iwlwifi: mvm: remove unused flags from TX command Emmanuel Grumbach
2014-07-06  9:35 ` [PATCH 10/40] iwlwifi: mvm: BT Coex - prepare towards new API Emmanuel Grumbach
2014-07-06  9:35 ` [PATCH 11/40] iwlwifi: mvm: BT Coex - " Emmanuel Grumbach
2014-07-06  9:35 ` [PATCH 12/40] iwlwifi: mvm: BT Coex - convert the sw boost update to " Emmanuel Grumbach
2014-07-06  9:35 ` [PATCH 13/40] iwlwifi: mvm: BT Coex - convert the co-running " Emmanuel Grumbach
2014-07-06  9:35 ` [PATCH 14/40] iwlwifi: mvm: BT Coex - convert reduced Tx power " Emmanuel Grumbach
2014-07-06  9:35 ` [PATCH 15/40] iwlwifi: mvm: BT Coex - add High Band retention Emmanuel Grumbach
2014-07-06  9:35 ` [PATCH 16/40] iwlwifi: mvm: BT Coex - fix debugfs with old API Emmanuel Grumbach
2014-07-06  9:35 ` [PATCH 17/40] iwlwifi: mvm: warn about empty OTP Emmanuel Grumbach
2014-07-06  9:35 ` [PATCH 18/40] iwlwifi: mvm: rs: don't clear persistent fields Emmanuel Grumbach
2014-07-06  9:35 ` [PATCH 19/40] iwlwifi: mvm: rs: don't save debugfs files Emmanuel Grumbach
2014-07-06  9:35 ` [PATCH 20/40] iwlwifi: mvm: add unified LMAC scan API Emmanuel Grumbach
2014-07-06  9:35 ` [PATCH 21/40] iwlwifi: mvm: init lmac scan command Emmanuel Grumbach
2014-07-06  9:35 ` [PATCH 22/40] iwlwifi: mvm: fix endianity in " Emmanuel Grumbach
2014-07-06  9:35 ` [PATCH 23/40] iwlwifi: 8000: drop a print when the address is invalid Emmanuel Grumbach
2014-07-06  9:36 ` [PATCH 24/40] iwlwifi: mvm: let iwl_mvm_update_quotas disregard a disabled vif Emmanuel Grumbach
2014-07-06  9:36 ` [PATCH 25/40] iwlwifi: mvm: don't send zero quota to the firmware Emmanuel Grumbach
2014-07-06  9:36 ` [PATCH 26/40] iwlwifi: mvm: validate that we don't send zero quota Emmanuel Grumbach
2014-07-06  9:36 ` [PATCH 27/40] iwlwifi: mvm: don't pass update type to quota iterator Emmanuel Grumbach
2014-07-06  9:36 ` [PATCH 28/40] iwlwifi: mvm: remove update type argument from quota update Emmanuel Grumbach
2014-07-06  9:36 ` [PATCH 29/40] iwlwifi: mvm: add switch_vif_chanctx operation Emmanuel Grumbach
2014-07-06  9:36 ` [PATCH 30/40] iwlwifi: mvm: CSA unbind-bind flow support for client Emmanuel Grumbach
2014-07-06  9:36 ` [PATCH 31/40] iwlwifi: mvm: Use beacon_get_template instead of beacon_get Emmanuel Grumbach
2014-07-06  9:36 ` [PATCH 32/40] iwlwifi: mvm: Protect mvm->csa_vif with RCU Emmanuel Grumbach
2014-07-06  9:36 ` Emmanuel Grumbach [this message]
2014-07-06  9:36 ` [PATCH 34/40] iwlwifi: mvm: Use CS tx block bit for AP/GO Emmanuel Grumbach
2014-07-06  9:36 ` [PATCH 35/40] iwlwifi: mvm: disallow new TDLS stations when appropriate Emmanuel Grumbach
2014-07-06  9:36 ` [PATCH 36/40] iwlwifi: mvm: protect TDLS discovery session Emmanuel Grumbach
2014-07-06  9:36 ` [PATCH 37/40] iwlwifi: disable PSM on vifs with associated TDLS peers Emmanuel Grumbach
2014-07-06  9:36 ` [PATCH 38/40] iwlwifi: mvm: teardown TDLS peers when initiating DCM Emmanuel Grumbach
2014-07-06  9:36 ` [PATCH 39/40] iwlwifi: mvm: remove 8000 HW family setting of adc sampling on nic config Emmanuel Grumbach
2014-07-06  9:36 ` [PATCH 40/40] iwlwifi: mvm: minor fix in comment Emmanuel Grumbach
2014-07-07 18:44 ` pull request: iwlwifi-next 2014-07-06 Emmanuel Grumbach
2014-07-07 20:08   ` John W. Linville

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1404639376-3792-33-git-send-email-egrumbach@gmail.com \
    --to=egrumbach@gmail.com \
    --cc=andrei.otcheretianski@intel.com \
    --cc=emmanuel.grumbach@intel.com \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.