[PATCH 1/4] can: sja1000: Add support for CAN_CTRLMODE_LOOPBACK

[Nikita Edward Baruzdin <nebaruzdin@gmail.com>]

This adds support for hardware loopback in SJA1000 by utilising its self
reception request (SRR) feature. Upon SRR the message is transmitted and
received simultaneously, meaning you can't have hardware loopback
without actually sending a message to the CAN bus in case of SJA1000.

Signed-off-by: Nikita Edward Baruzdin <nebaruzdin@gmail.com>
---
 drivers/net/can/sja1000/sja1000.c | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c
index f31499a..c480bce 100644
--- a/drivers/net/can/sja1000/sja1000.c
+++ b/drivers/net/can/sja1000/sja1000.c
@@ -278,6 +278,7 @@ static netdev_tx_t sja1000_start_xmit(struct sk_buff *skb,
 	uint8_t dlc;
 	canid_t id;
 	uint8_t dreg;
+	u8 cmd_reg_val = 0x00;
 	int i;
 
 	if (can_dropped_invalid_skb(dev, skb))
@@ -312,9 +313,14 @@ static netdev_tx_t sja1000_start_xmit(struct sk_buff *skb,
 	can_put_echo_skb(skb, dev, 0);
 
 	if (priv->can.ctrlmode & CAN_CTRLMODE_ONE_SHOT)
-		sja1000_write_cmdreg(priv, CMD_TR | CMD_AT);
+		cmd_reg_val |= CMD_AT;
+
+	if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK)
+		cmd_reg_val |= CMD_SRR;
 	else
-		sja1000_write_cmdreg(priv, CMD_TR);
+		cmd_reg_val |= CMD_TR;
+
+	sja1000_write_cmdreg(priv, cmd_reg_val);
 
 	return NETDEV_TX_OK;
 }
@@ -622,9 +628,11 @@ struct net_device *alloc_sja1000dev(int sizeof_priv)
 	priv->can.do_set_bittiming = sja1000_set_bittiming;
 	priv->can.do_set_mode = sja1000_set_mode;
 	priv->can.do_get_berr_counter = sja1000_get_berr_counter;
-	priv->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES |
-		CAN_CTRLMODE_BERR_REPORTING | CAN_CTRLMODE_LISTENONLY |
-		CAN_CTRLMODE_ONE_SHOT;
+	priv->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK
+				     | CAN_CTRLMODE_LISTENONLY
+				     | CAN_CTRLMODE_3_SAMPLES
+				     | CAN_CTRLMODE_ONE_SHOT
+				     | CAN_CTRLMODE_BERR_REPORTING;
 
 	spin_lock_init(&priv->cmdreg_lock);
 
-- 
2.0.1