[PATCH v2 0/7] arch: arm64: enable support for Samsung Exynos7 SoC

[PATCH v2 0/7] arch: arm64: enable support for Samsung Exynos7 SoC

[Naveen Krishna Chatradhi]

Changes since v1:
- Reduced the number of features targetted for the initial platform support.

This patchset supports new Exynos7 Samsung SoC based on Cortex-A57.
Exynos7 is a System-On-Chip (SoC) that is based on 64-bit
ARMv8 RISC processor.

NOTE:
We tested these patches with the 
"arm64: dts: add <dt-bindings/> symlink" change posted @
https://lkml.org/lkml/2014/9/1/688

The following patches are tested based on Kgene's for-next tree.
https://git.kernel.org/cgit/linux/kernel/git/kgene/linux-samsung.git/log/?h=for-next

The following patches are required for this series.
1- "irqchip: exynos-combiner: Fix compilation error on ARM64"
   https://www.mail-archive.com/linux-samsung-soc@vger.kernel.org/msg36209.html
2- "tty/serial: fix config dependencies for samsung serial"
   https://www.mail-archive.com/linux-samsung-soc@vger.kernel.org/msg36208.html

Alim Akhtar (1):
  arm64: exynos7: Enable ARMv8 based Exynos7 (SoC) support

Naveen Krishna Chatradhi (6):
  clk: samsung: add support for 145xx and 1460x PLLs
  clk: samsung: Factor out the common code to clk.c
  clk: samsung: Add fixed_factor_clocks field to struct exynos_cmu_info
  clk: samsung: add initial clock support for Exynos7 SoC
  tty/serial: samsung: enable usage for 64-bit Exynos platforms
  arm64: dts: Add initial device tree support for EXYNOS7

 .../devicetree/bindings/clock/exynos7-clock.txt    |   37 ++
 arch/arm64/Kconfig                                 |   12 +
 arch/arm64/boot/dts/Makefile                       |    1 +
 arch/arm64/boot/dts/exynos/exynos7-espresso.dts    |   31 ++
 arch/arm64/boot/dts/exynos/exynos7.dtsi            |  168 ++++++++
 drivers/clk/samsung/Makefile                       |    1 +
 drivers/clk/samsung/clk-exynos5260.c               |  183 ++------
 drivers/clk/samsung/clk-exynos7.c                  |  438 ++++++++++++++++++++
 drivers/clk/samsung/clk-pll.c                      |   25 +-
 drivers/clk/samsung/clk-pll.h                      |    4 +
 drivers/clk/samsung/clk.c                          |   98 +++++
 drivers/clk/samsung/clk.h                          |   37 ++
 drivers/tty/serial/Kconfig                         |    2 +-
 include/dt-bindings/clock/exynos7-clk.h            |   55 +++
 14 files changed, 929 insertions(+), 163 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/exynos7-clock.txt
 create mode 100644 arch/arm64/boot/dts/exynos/exynos7-espresso.dts
 create mode 100644 arch/arm64/boot/dts/exynos/exynos7.dtsi
 create mode 100644 drivers/clk/samsung/clk-exynos7.c
 create mode 100644 include/dt-bindings/clock/exynos7-clk.h

-- 
1.7.9.5

[PATCH v2 0/7] arch: arm64: enable support for Samsung Exynos7 SoC

[Naveen Krishna Chatradhi]

Changes since v1:
- Reduced the number of features targetted for the initial platform support.

This patchset supports new Exynos7 Samsung SoC based on Cortex-A57.
Exynos7 is a System-On-Chip (SoC) that is based on 64-bit
ARMv8 RISC processor.

NOTE:
We tested these patches with the 
"arm64: dts: add <dt-bindings/> symlink" change posted @
https://lkml.org/lkml/2014/9/1/688

The following patches are tested based on Kgene's for-next tree.
https://git.kernel.org/cgit/linux/kernel/git/kgene/linux-samsung.git/log/?h=for-next

The following patches are required for this series.
1- "irqchip: exynos-combiner: Fix compilation error on ARM64"
   https://www.mail-archive.com/linux-samsung-soc at vger.kernel.org/msg36209.html
2- "tty/serial: fix config dependencies for samsung serial"
   https://www.mail-archive.com/linux-samsung-soc at vger.kernel.org/msg36208.html

Alim Akhtar (1):
  arm64: exynos7: Enable ARMv8 based Exynos7 (SoC) support

Naveen Krishna Chatradhi (6):
  clk: samsung: add support for 145xx and 1460x PLLs
  clk: samsung: Factor out the common code to clk.c
  clk: samsung: Add fixed_factor_clocks field to struct exynos_cmu_info
  clk: samsung: add initial clock support for Exynos7 SoC
  tty/serial: samsung: enable usage for 64-bit Exynos platforms
  arm64: dts: Add initial device tree support for EXYNOS7

 .../devicetree/bindings/clock/exynos7-clock.txt    |   37 ++
 arch/arm64/Kconfig                                 |   12 +
 arch/arm64/boot/dts/Makefile                       |    1 +
 arch/arm64/boot/dts/exynos/exynos7-espresso.dts    |   31 ++
 arch/arm64/boot/dts/exynos/exynos7.dtsi            |  168 ++++++++
 drivers/clk/samsung/Makefile                       |    1 +
 drivers/clk/samsung/clk-exynos5260.c               |  183 ++------
 drivers/clk/samsung/clk-exynos7.c                  |  438 ++++++++++++++++++++
 drivers/clk/samsung/clk-pll.c                      |   25 +-
 drivers/clk/samsung/clk-pll.h                      |    4 +
 drivers/clk/samsung/clk.c                          |   98 +++++
 drivers/clk/samsung/clk.h                          |   37 ++
 drivers/tty/serial/Kconfig                         |    2 +-
 include/dt-bindings/clock/exynos7-clk.h            |   55 +++
 14 files changed, 929 insertions(+), 163 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/exynos7-clock.txt
 create mode 100644 arch/arm64/boot/dts/exynos/exynos7-espresso.dts
 create mode 100644 arch/arm64/boot/dts/exynos/exynos7.dtsi
 create mode 100644 drivers/clk/samsung/clk-exynos7.c
 create mode 100644 include/dt-bindings/clock/exynos7-clk.h

-- 
1.7.9.5

[PATCH v2 1/7] clk: samsung: add support for 145xx and 1460x PLLs

[Naveen Krishna Chatradhi]

PLL145xx is similar to PLL35xx and PLL1460x is almost similar
to PLL46xx with minor differences in bit positions. Hence,
reuse the functions defined for pll_35xx and pll_46xx to
support 145xx and 1460x PLLs respectively.

Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/samsung/clk-pll.c |   25 ++++++++++++++++++++-----
 drivers/clk/samsung/clk-pll.h |    4 ++++
 2 files changed, 24 insertions(+), 5 deletions(-)

diff --git a/drivers/clk/samsung/clk-pll.c b/drivers/clk/samsung/clk-pll.c
index b07fad2..9d70e5c 100644
--- a/drivers/clk/samsung/clk-pll.c
+++ b/drivers/clk/samsung/clk-pll.c
@@ -482,6 +482,8 @@ static const struct clk_ops samsung_pll45xx_clk_min_ops = {
 
 #define PLL46XX_VSEL_MASK	(1)
 #define PLL46XX_MDIV_MASK	(0x1FF)
+#define PLL1460X_MDIV_MASK	(0x3FF)
+
 #define PLL46XX_PDIV_MASK	(0x3F)
 #define PLL46XX_SDIV_MASK	(0x7)
 #define PLL46XX_VSEL_SHIFT	(27)
@@ -511,13 +513,15 @@ static unsigned long samsung_pll46xx_recalc_rate(struct clk_hw *hw,
 
 	pll_con0 = __raw_readl(pll->con_reg);
 	pll_con1 = __raw_readl(pll->con_reg + 4);
-	mdiv = (pll_con0 >> PLL46XX_MDIV_SHIFT) & PLL46XX_MDIV_MASK;
+	mdiv = (pll_con0 >> PLL46XX_MDIV_SHIFT) & ((pll->type == pll_1460x) ?
+				PLL1460X_MDIV_MASK : PLL46XX_MDIV_MASK);
 	pdiv = (pll_con0 >> PLL46XX_PDIV_SHIFT) & PLL46XX_PDIV_MASK;
 	sdiv = (pll_con0 >> PLL46XX_SDIV_SHIFT) & PLL46XX_SDIV_MASK;
 	kdiv = pll->type == pll_4650c ? pll_con1 & PLL4650C_KDIV_MASK :
 					pll_con1 & PLL46XX_KDIV_MASK;
 
-	shift = pll->type == pll_4600 ? 16 : 10;
+	shift = ((pll->type == pll_4600) || (pll->type == pll_1460x)) ? 16 : 10;
+
 	fvco *= (mdiv << shift) + kdiv;
 	do_div(fvco, (pdiv << sdiv));
 	fvco >>= shift;
@@ -573,14 +577,21 @@ static int samsung_pll46xx_set_rate(struct clk_hw *hw, unsigned long drate,
 		lock = 0xffff;
 
 	/* Set PLL PMS and VSEL values. */
-	con0 &= ~((PLL46XX_MDIV_MASK << PLL46XX_MDIV_SHIFT) |
+	if (pll->type == pll_1460x) {
+		con0 &= ~((PLL1460X_MDIV_MASK << PLL46XX_MDIV_SHIFT) |
+			(PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT) |
+			(PLL46XX_SDIV_MASK << PLL46XX_SDIV_SHIFT));
+	} else {
+		con0 &= ~((PLL46XX_MDIV_MASK << PLL46XX_MDIV_SHIFT) |
 			(PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT) |
 			(PLL46XX_SDIV_MASK << PLL46XX_SDIV_SHIFT) |
 			(PLL46XX_VSEL_MASK << PLL46XX_VSEL_SHIFT));
+		con0 |=	rate->vsel << PLL46XX_VSEL_SHIFT;
+	}
+
 	con0 |= (rate->mdiv << PLL46XX_MDIV_SHIFT) |
 			(rate->pdiv << PLL46XX_PDIV_SHIFT) |
-			(rate->sdiv << PLL46XX_SDIV_SHIFT) |
-			(rate->vsel << PLL46XX_VSEL_SHIFT);
+			(rate->sdiv << PLL46XX_SDIV_SHIFT);
 
 	/* Set PLL K, MFR and MRR values. */
 	con1 = __raw_readl(pll->con_reg + 0x4);
@@ -1190,6 +1201,9 @@ static void __init _samsung_clk_register_pll(struct samsung_clk_provider *ctx,
 	/* clk_ops for 35xx and 2550 are similar */
 	case pll_35xx:
 	case pll_2550:
+	case pll_1450x:
+	case pll_1451x:
+	case pll_1452x:
 		if (!pll->rate_table)
 			init.ops = &samsung_pll35xx_clk_min_ops;
 		else
@@ -1223,6 +1237,7 @@ static void __init _samsung_clk_register_pll(struct samsung_clk_provider *ctx,
 	case pll_4600:
 	case pll_4650:
 	case pll_4650c:
+	case pll_1460x:
 		if (!pll->rate_table)
 			init.ops = &samsung_pll46xx_clk_min_ops;
 		else
diff --git a/drivers/clk/samsung/clk-pll.h b/drivers/clk/samsung/clk-pll.h
index c0ed4d4..213de9a 100644
--- a/drivers/clk/samsung/clk-pll.h
+++ b/drivers/clk/samsung/clk-pll.h
@@ -33,6 +33,10 @@ enum samsung_pll_type {
 	pll_s3c2440_mpll,
 	pll_2550xx,
 	pll_2650xx,
+	pll_1450x,
+	pll_1451x,
+	pll_1452x,
+	pll_1460x,
 };
 
 #define PLL_35XX_RATE(_rate, _m, _p, _s)			\
-- 
1.7.9.5

[PATCH v2 1/7] clk: samsung: add support for 145xx and 1460x PLLs

[Naveen Krishna Chatradhi]

PLL145xx is similar to PLL35xx and PLL1460x is almost similar
to PLL46xx with minor differences in bit positions. Hence,
reuse the functions defined for pll_35xx and pll_46xx to
support 145xx and 1460x PLLs respectively.

Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/samsung/clk-pll.c |   25 ++++++++++++++++++++-----
 drivers/clk/samsung/clk-pll.h |    4 ++++
 2 files changed, 24 insertions(+), 5 deletions(-)

diff --git a/drivers/clk/samsung/clk-pll.c b/drivers/clk/samsung/clk-pll.c
index b07fad2..9d70e5c 100644
--- a/drivers/clk/samsung/clk-pll.c
+++ b/drivers/clk/samsung/clk-pll.c
@@ -482,6 +482,8 @@ static const struct clk_ops samsung_pll45xx_clk_min_ops = {
 
 #define PLL46XX_VSEL_MASK	(1)
 #define PLL46XX_MDIV_MASK	(0x1FF)
+#define PLL1460X_MDIV_MASK	(0x3FF)
+
 #define PLL46XX_PDIV_MASK	(0x3F)
 #define PLL46XX_SDIV_MASK	(0x7)
 #define PLL46XX_VSEL_SHIFT	(27)
@@ -511,13 +513,15 @@ static unsigned long samsung_pll46xx_recalc_rate(struct clk_hw *hw,
 
 	pll_con0 = __raw_readl(pll->con_reg);
 	pll_con1 = __raw_readl(pll->con_reg + 4);
-	mdiv = (pll_con0 >> PLL46XX_MDIV_SHIFT) & PLL46XX_MDIV_MASK;
+	mdiv = (pll_con0 >> PLL46XX_MDIV_SHIFT) & ((pll->type == pll_1460x) ?
+				PLL1460X_MDIV_MASK : PLL46XX_MDIV_MASK);
 	pdiv = (pll_con0 >> PLL46XX_PDIV_SHIFT) & PLL46XX_PDIV_MASK;
 	sdiv = (pll_con0 >> PLL46XX_SDIV_SHIFT) & PLL46XX_SDIV_MASK;
 	kdiv = pll->type == pll_4650c ? pll_con1 & PLL4650C_KDIV_MASK :
 					pll_con1 & PLL46XX_KDIV_MASK;
 
-	shift = pll->type == pll_4600 ? 16 : 10;
+	shift = ((pll->type == pll_4600) || (pll->type == pll_1460x)) ? 16 : 10;
+
 	fvco *= (mdiv << shift) + kdiv;
 	do_div(fvco, (pdiv << sdiv));
 	fvco >>= shift;
@@ -573,14 +577,21 @@ static int samsung_pll46xx_set_rate(struct clk_hw *hw, unsigned long drate,
 		lock = 0xffff;
 
 	/* Set PLL PMS and VSEL values. */
-	con0 &= ~((PLL46XX_MDIV_MASK << PLL46XX_MDIV_SHIFT) |
+	if (pll->type == pll_1460x) {
+		con0 &= ~((PLL1460X_MDIV_MASK << PLL46XX_MDIV_SHIFT) |
+			(PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT) |
+			(PLL46XX_SDIV_MASK << PLL46XX_SDIV_SHIFT));
+	} else {
+		con0 &= ~((PLL46XX_MDIV_MASK << PLL46XX_MDIV_SHIFT) |
 			(PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT) |
 			(PLL46XX_SDIV_MASK << PLL46XX_SDIV_SHIFT) |
 			(PLL46XX_VSEL_MASK << PLL46XX_VSEL_SHIFT));
+		con0 |=	rate->vsel << PLL46XX_VSEL_SHIFT;
+	}
+
 	con0 |= (rate->mdiv << PLL46XX_MDIV_SHIFT) |
 			(rate->pdiv << PLL46XX_PDIV_SHIFT) |
-			(rate->sdiv << PLL46XX_SDIV_SHIFT) |
-			(rate->vsel << PLL46XX_VSEL_SHIFT);
+			(rate->sdiv << PLL46XX_SDIV_SHIFT);
 
 	/* Set PLL K, MFR and MRR values. */
 	con1 = __raw_readl(pll->con_reg + 0x4);
@@ -1190,6 +1201,9 @@ static void __init _samsung_clk_register_pll(struct samsung_clk_provider *ctx,
 	/* clk_ops for 35xx and 2550 are similar */
 	case pll_35xx:
 	case pll_2550:
+	case pll_1450x:
+	case pll_1451x:
+	case pll_1452x:
 		if (!pll->rate_table)
 			init.ops = &samsung_pll35xx_clk_min_ops;
 		else
@@ -1223,6 +1237,7 @@ static void __init _samsung_clk_register_pll(struct samsung_clk_provider *ctx,
 	case pll_4600:
 	case pll_4650:
 	case pll_4650c:
+	case pll_1460x:
 		if (!pll->rate_table)
 			init.ops = &samsung_pll46xx_clk_min_ops;
 		else
diff --git a/drivers/clk/samsung/clk-pll.h b/drivers/clk/samsung/clk-pll.h
index c0ed4d4..213de9a 100644
--- a/drivers/clk/samsung/clk-pll.h
+++ b/drivers/clk/samsung/clk-pll.h
@@ -33,6 +33,10 @@ enum samsung_pll_type {
 	pll_s3c2440_mpll,
 	pll_2550xx,
 	pll_2650xx,
+	pll_1450x,
+	pll_1451x,
+	pll_1452x,
+	pll_1460x,
 };
 
 #define PLL_35XX_RATE(_rate, _m, _p, _s)			\
-- 
1.7.9.5

[PATCH v2 2/7] clk: samsung: Factor out the common code to clk.c

[Naveen Krishna Chatradhi]

While adding clock support for Exynos5260, the infrastructure to
register multiple clock controllers was introduced. Factor out the
support for registering multiple clock controller from Exynos5260
clock code to common samsung clock code so that it can be used by
other Exynos SoC which have multiple clock controllers.

Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/samsung/clk-exynos5260.c |  183 +++++-----------------------------
 drivers/clk/samsung/clk.c            |   95 ++++++++++++++++++
 drivers/clk/samsung/clk.h            |   34 +++++++
 3 files changed, 155 insertions(+), 157 deletions(-)

diff --git a/drivers/clk/samsung/clk-exynos5260.c b/drivers/clk/samsung/clk-exynos5260.c
index ce3de97..d72c982 100644
--- a/drivers/clk/samsung/clk-exynos5260.c
+++ b/drivers/clk/samsung/clk-exynos5260.c
@@ -11,10 +11,8 @@
 
 #include <linux/clk.h>
 #include <linux/clkdev.h>
-#include <linux/clk-provider.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/syscore_ops.h>
 
 #include "clk-exynos5260.h"
 #include "clk.h"
@@ -22,39 +20,6 @@
 
 #include <dt-bindings/clock/exynos5260-clk.h>
 
-static LIST_HEAD(clock_reg_cache_list);
-
-struct exynos5260_clock_reg_cache {
-	struct list_head node;
-	void __iomem *reg_base;
-	struct samsung_clk_reg_dump *rdump;
-	unsigned int rd_num;
-};
-
-struct exynos5260_cmu_info {
-	/* list of pll clocks and respective count */
-	struct samsung_pll_clock *pll_clks;
-	unsigned int nr_pll_clks;
-	/* list of mux clocks and respective count */
-	struct samsung_mux_clock *mux_clks;
-	unsigned int nr_mux_clks;
-	/* list of div clocks and respective count */
-	struct samsung_div_clock *div_clks;
-	unsigned int nr_div_clks;
-	/* list of gate clocks and respective count */
-	struct samsung_gate_clock *gate_clks;
-	unsigned int nr_gate_clks;
-	/* list of fixed clocks and respective count */
-	struct samsung_fixed_rate_clock *fixed_clks;
-	unsigned int nr_fixed_clks;
-	/* total number of clocks with IDs assigned*/
-	unsigned int nr_clk_ids;
-
-	/* list and number of clocks registers */
-	unsigned long *clk_regs;
-	unsigned int nr_clk_regs;
-};
-
 /*
  * Applicable for all 2550 Type PLLS for Exynos5260, listed below
  * DISP_PLL, EGL_PLL, KFC_PLL, MEM_PLL, BUS_PLL, MEDIA_PLL, G3D_PLL.
@@ -115,102 +80,6 @@ static struct samsung_pll_rate_table pll2650_24mhz_tbl[] __initdata = {
 
 #ifdef CONFIG_PM_SLEEP
 
-static int exynos5260_clk_suspend(void)
-{
-	struct exynos5260_clock_reg_cache *cache;
-
-	list_for_each_entry(cache, &clock_reg_cache_list, node)
-		samsung_clk_save(cache->reg_base, cache->rdump,
-				cache->rd_num);
-
-	return 0;
-}
-
-static void exynos5260_clk_resume(void)
-{
-	struct exynos5260_clock_reg_cache *cache;
-
-	list_for_each_entry(cache, &clock_reg_cache_list, node)
-		samsung_clk_restore(cache->reg_base, cache->rdump,
-				cache->rd_num);
-}
-
-static struct syscore_ops exynos5260_clk_syscore_ops = {
-	.suspend = exynos5260_clk_suspend,
-	.resume = exynos5260_clk_resume,
-};
-
-static void exynos5260_clk_sleep_init(void __iomem *reg_base,
-			unsigned long *rdump,
-			unsigned long nr_rdump)
-{
-	struct exynos5260_clock_reg_cache *reg_cache;
-
-	reg_cache = kzalloc(sizeof(struct exynos5260_clock_reg_cache),
-			GFP_KERNEL);
-	if (!reg_cache)
-		panic("could not allocate register cache.\n");
-
-	reg_cache->rdump = samsung_clk_alloc_reg_dump(rdump, nr_rdump);
-
-	if (!reg_cache->rdump)
-		panic("could not allocate register dump storage.\n");
-
-	if (list_empty(&clock_reg_cache_list))
-		register_syscore_ops(&exynos5260_clk_syscore_ops);
-
-	reg_cache->rd_num = nr_rdump;
-	reg_cache->reg_base = reg_base;
-	list_add_tail(&reg_cache->node, &clock_reg_cache_list);
-}
-
-#else
-static void exynos5260_clk_sleep_init(void __iomem *reg_base,
-			unsigned long *rdump,
-			unsigned long nr_rdump){}
-#endif
-
-/*
- * Common function which registers plls, muxes, dividers and gates
- * for each CMU. It also add CMU register list to register cache.
- */
-
-void __init exynos5260_cmu_register_one(struct device_node *np,
-			struct exynos5260_cmu_info *cmu)
-{
-	void __iomem *reg_base;
-	struct samsung_clk_provider *ctx;
-
-	reg_base = of_iomap(np, 0);
-	if (!reg_base)
-		panic("%s: failed to map registers\n", __func__);
-
-	ctx = samsung_clk_init(np, reg_base, cmu->nr_clk_ids);
-	if (!ctx)
-		panic("%s: unable to alllocate ctx\n", __func__);
-
-	if (cmu->pll_clks)
-		samsung_clk_register_pll(ctx, cmu->pll_clks, cmu->nr_pll_clks,
-			reg_base);
-	if (cmu->mux_clks)
-		samsung_clk_register_mux(ctx,  cmu->mux_clks,
-			cmu->nr_mux_clks);
-	if (cmu->div_clks)
-		samsung_clk_register_div(ctx, cmu->div_clks, cmu->nr_div_clks);
-	if (cmu->gate_clks)
-		samsung_clk_register_gate(ctx, cmu->gate_clks,
-			cmu->nr_gate_clks);
-	if (cmu->fixed_clks)
-		samsung_clk_register_fixed_rate(ctx, cmu->fixed_clks,
-			cmu->nr_fixed_clks);
-	if (cmu->clk_regs)
-		exynos5260_clk_sleep_init(reg_base, cmu->clk_regs,
-			cmu->nr_clk_regs);
-
-	samsung_clk_of_add_provider(np, ctx);
-}
-
-
 /* CMU_AUD */
 
 static unsigned long aud_clk_regs[] __initdata = {
@@ -268,7 +137,7 @@ struct samsung_gate_clock aud_gate_clks[] __initdata = {
 
 static void __init exynos5260_clk_aud_init(struct device_node *np)
 {
-	struct exynos5260_cmu_info cmu = {0};
+	struct exynos_cmu_info cmu = {0};
 
 	cmu.mux_clks = aud_mux_clks;
 	cmu.nr_mux_clks = ARRAY_SIZE(aud_mux_clks);
@@ -280,7 +149,7 @@ static void __init exynos5260_clk_aud_init(struct device_node *np)
 	cmu.clk_regs = aud_clk_regs;
 	cmu.nr_clk_regs = ARRAY_SIZE(aud_clk_regs);
 
-	exynos5260_cmu_register_one(np, &cmu);
+	exynos_cmu_register_one(np, &cmu);
 }
 
 CLK_OF_DECLARE(exynos5260_clk_aud, "samsung,exynos5260-clock-aud",
@@ -458,7 +327,7 @@ struct samsung_gate_clock disp_gate_clks[] __initdata = {
 
 static void __init exynos5260_clk_disp_init(struct device_node *np)
 {
-	struct exynos5260_cmu_info cmu = {0};
+	struct exynos_cmu_info cmu = {0};
 
 	cmu.mux_clks = disp_mux_clks;
 	cmu.nr_mux_clks = ARRAY_SIZE(disp_mux_clks);
@@ -470,7 +339,7 @@ static void __init exynos5260_clk_disp_init(struct device_node *np)
 	cmu.clk_regs = disp_clk_regs;
 	cmu.nr_clk_regs = ARRAY_SIZE(disp_clk_regs);
 
-	exynos5260_cmu_register_one(np, &cmu);
+	exynos_cmu_register_one(np, &cmu);
 }
 
 CLK_OF_DECLARE(exynos5260_clk_disp, "samsung,exynos5260-clock-disp",
@@ -522,7 +391,7 @@ static struct samsung_pll_clock egl_pll_clks[] __initdata = {
 
 static void __init exynos5260_clk_egl_init(struct device_node *np)
 {
-	struct exynos5260_cmu_info cmu = {0};
+	struct exynos_cmu_info cmu = {0};
 
 	cmu.pll_clks = egl_pll_clks;
 	cmu.nr_pll_clks =  ARRAY_SIZE(egl_pll_clks);
@@ -534,7 +403,7 @@ static void __init exynos5260_clk_egl_init(struct device_node *np)
 	cmu.clk_regs = egl_clk_regs;
 	cmu.nr_clk_regs = ARRAY_SIZE(egl_clk_regs);
 
-	exynos5260_cmu_register_one(np, &cmu);
+	exynos_cmu_register_one(np, &cmu);
 }
 
 CLK_OF_DECLARE(exynos5260_clk_egl, "samsung,exynos5260-clock-egl",
@@ -624,7 +493,7 @@ struct samsung_gate_clock fsys_gate_clks[] __initdata = {
 
 static void __init exynos5260_clk_fsys_init(struct device_node *np)
 {
-	struct exynos5260_cmu_info cmu = {0};
+	struct exynos_cmu_info cmu = {0};
 
 	cmu.mux_clks = fsys_mux_clks;
 	cmu.nr_mux_clks = ARRAY_SIZE(fsys_mux_clks);
@@ -634,7 +503,7 @@ static void __init exynos5260_clk_fsys_init(struct device_node *np)
 	cmu.clk_regs = fsys_clk_regs;
 	cmu.nr_clk_regs = ARRAY_SIZE(fsys_clk_regs);
 
-	exynos5260_cmu_register_one(np, &cmu);
+	exynos_cmu_register_one(np, &cmu);
 }
 
 CLK_OF_DECLARE(exynos5260_clk_fsys, "samsung,exynos5260-clock-fsys",
@@ -713,7 +582,7 @@ struct samsung_gate_clock g2d_gate_clks[] __initdata = {
 
 static void __init exynos5260_clk_g2d_init(struct device_node *np)
 {
-	struct exynos5260_cmu_info cmu = {0};
+	struct exynos_cmu_info cmu = {0};
 
 	cmu.mux_clks = g2d_mux_clks;
 	cmu.nr_mux_clks = ARRAY_SIZE(g2d_mux_clks);
@@ -725,7 +594,7 @@ static void __init exynos5260_clk_g2d_init(struct device_node *np)
 	cmu.clk_regs = g2d_clk_regs;
 	cmu.nr_clk_regs = ARRAY_SIZE(g2d_clk_regs);
 
-	exynos5260_cmu_register_one(np, &cmu);
+	exynos_cmu_register_one(np, &cmu);
 }
 
 CLK_OF_DECLARE(exynos5260_clk_g2d, "samsung,exynos5260-clock-g2d",
@@ -774,7 +643,7 @@ static struct samsung_pll_clock g3d_pll_clks[] __initdata = {
 
 static void __init exynos5260_clk_g3d_init(struct device_node *np)
 {
-	struct exynos5260_cmu_info cmu = {0};
+	struct exynos_cmu_info cmu = {0};
 
 	cmu.pll_clks = g3d_pll_clks;
 	cmu.nr_pll_clks =  ARRAY_SIZE(g3d_pll_clks);
@@ -788,7 +657,7 @@ static void __init exynos5260_clk_g3d_init(struct device_node *np)
 	cmu.clk_regs = g3d_clk_regs;
 	cmu.nr_clk_regs = ARRAY_SIZE(g3d_clk_regs);
 
-	exynos5260_cmu_register_one(np, &cmu);
+	exynos_cmu_register_one(np, &cmu);
 }
 
 CLK_OF_DECLARE(exynos5260_clk_g3d, "samsung,exynos5260-clock-g3d",
@@ -909,7 +778,7 @@ struct samsung_gate_clock gscl_gate_clks[] __initdata = {
 
 static void __init exynos5260_clk_gscl_init(struct device_node *np)
 {
-	struct exynos5260_cmu_info cmu = {0};
+	struct exynos_cmu_info cmu = {0};
 
 	cmu.mux_clks = gscl_mux_clks;
 	cmu.nr_mux_clks = ARRAY_SIZE(gscl_mux_clks);
@@ -921,7 +790,7 @@ static void __init exynos5260_clk_gscl_init(struct device_node *np)
 	cmu.clk_regs = gscl_clk_regs;
 	cmu.nr_clk_regs = ARRAY_SIZE(gscl_clk_regs);
 
-	exynos5260_cmu_register_one(np, &cmu);
+	exynos_cmu_register_one(np, &cmu);
 }
 
 CLK_OF_DECLARE(exynos5260_clk_gscl, "samsung,exynos5260-clock-gscl",
@@ -1028,7 +897,7 @@ struct samsung_gate_clock isp_gate_clks[] __initdata = {
 
 static void __init exynos5260_clk_isp_init(struct device_node *np)
 {
-	struct exynos5260_cmu_info cmu = {0};
+	struct exynos_cmu_info cmu = {0};
 
 	cmu.mux_clks = isp_mux_clks;
 	cmu.nr_mux_clks = ARRAY_SIZE(isp_mux_clks);
@@ -1040,7 +909,7 @@ static void __init exynos5260_clk_isp_init(struct device_node *np)
 	cmu.clk_regs = isp_clk_regs;
 	cmu.nr_clk_regs = ARRAY_SIZE(isp_clk_regs);
 
-	exynos5260_cmu_register_one(np, &cmu);
+	exynos_cmu_register_one(np, &cmu);
 }
 
 CLK_OF_DECLARE(exynos5260_clk_isp, "samsung,exynos5260-clock-isp",
@@ -1092,7 +961,7 @@ static struct samsung_pll_clock kfc_pll_clks[] __initdata = {
 
 static void __init exynos5260_clk_kfc_init(struct device_node *np)
 {
-	struct exynos5260_cmu_info cmu = {0};
+	struct exynos_cmu_info cmu = {0};
 
 	cmu.pll_clks = kfc_pll_clks;
 	cmu.nr_pll_clks =  ARRAY_SIZE(kfc_pll_clks);
@@ -1104,7 +973,7 @@ static void __init exynos5260_clk_kfc_init(struct device_node *np)
 	cmu.clk_regs = kfc_clk_regs;
 	cmu.nr_clk_regs = ARRAY_SIZE(kfc_clk_regs);
 
-	exynos5260_cmu_register_one(np, &cmu);
+	exynos_cmu_register_one(np, &cmu);
 }
 
 CLK_OF_DECLARE(exynos5260_clk_kfc, "samsung,exynos5260-clock-kfc",
@@ -1148,7 +1017,7 @@ struct samsung_gate_clock mfc_gate_clks[] __initdata = {
 
 static void __init exynos5260_clk_mfc_init(struct device_node *np)
 {
-	struct exynos5260_cmu_info cmu = {0};
+	struct exynos_cmu_info cmu = {0};
 
 	cmu.mux_clks = mfc_mux_clks;
 	cmu.nr_mux_clks = ARRAY_SIZE(mfc_mux_clks);
@@ -1160,7 +1029,7 @@ static void __init exynos5260_clk_mfc_init(struct device_node *np)
 	cmu.clk_regs = mfc_clk_regs;
 	cmu.nr_clk_regs = ARRAY_SIZE(mfc_clk_regs);
 
-	exynos5260_cmu_register_one(np, &cmu);
+	exynos_cmu_register_one(np, &cmu);
 }
 
 CLK_OF_DECLARE(exynos5260_clk_mfc, "samsung,exynos5260-clock-mfc",
@@ -1295,7 +1164,7 @@ static struct samsung_pll_clock mif_pll_clks[] __initdata = {
 
 static void __init exynos5260_clk_mif_init(struct device_node *np)
 {
-	struct exynos5260_cmu_info cmu = {0};
+	struct exynos_cmu_info cmu = {0};
 
 	cmu.pll_clks = mif_pll_clks;
 	cmu.nr_pll_clks =  ARRAY_SIZE(mif_pll_clks);
@@ -1309,7 +1178,7 @@ static void __init exynos5260_clk_mif_init(struct device_node *np)
 	cmu.clk_regs = mif_clk_regs;
 	cmu.nr_clk_regs = ARRAY_SIZE(mif_clk_regs);
 
-	exynos5260_cmu_register_one(np, &cmu);
+	exynos_cmu_register_one(np, &cmu);
 }
 
 CLK_OF_DECLARE(exynos5260_clk_mif, "samsung,exynos5260-clock-mif",
@@ -1503,7 +1372,7 @@ struct samsung_gate_clock peri_gate_clks[] __initdata = {
 
 static void __init exynos5260_clk_peri_init(struct device_node *np)
 {
-	struct exynos5260_cmu_info cmu = {0};
+	struct exynos_cmu_info cmu = {0};
 
 	cmu.mux_clks = peri_mux_clks;
 	cmu.nr_mux_clks = ARRAY_SIZE(peri_mux_clks);
@@ -1515,7 +1384,7 @@ static void __init exynos5260_clk_peri_init(struct device_node *np)
 	cmu.clk_regs = peri_clk_regs;
 	cmu.nr_clk_regs = ARRAY_SIZE(peri_clk_regs);
 
-	exynos5260_cmu_register_one(np, &cmu);
+	exynos_cmu_register_one(np, &cmu);
 }
 
 CLK_OF_DECLARE(exynos5260_clk_peri, "samsung,exynos5260-clock-peri",
@@ -1959,7 +1828,7 @@ static struct samsung_pll_clock top_pll_clks[] __initdata = {
 
 static void __init exynos5260_clk_top_init(struct device_node *np)
 {
-	struct exynos5260_cmu_info cmu = {0};
+	struct exynos_cmu_info cmu = {0};
 
 	cmu.pll_clks = top_pll_clks;
 	cmu.nr_pll_clks =  ARRAY_SIZE(top_pll_clks);
@@ -1975,7 +1844,7 @@ static void __init exynos5260_clk_top_init(struct device_node *np)
 	cmu.clk_regs = top_clk_regs;
 	cmu.nr_clk_regs = ARRAY_SIZE(top_clk_regs);
 
-	exynos5260_cmu_register_one(np, &cmu);
+	exynos_cmu_register_one(np, &cmu);
 }
 
 CLK_OF_DECLARE(exynos5260_clk_top, "samsung,exynos5260-clock-top",
diff --git a/drivers/clk/samsung/clk.c b/drivers/clk/samsung/clk.c
index deab84d..a043654 100644
--- a/drivers/clk/samsung/clk.c
+++ b/drivers/clk/samsung/clk.c
@@ -14,6 +14,8 @@
 #include <linux/syscore_ops.h>
 #include "clk.h"
 
+static LIST_HEAD(clock_reg_cache_list);
+
 void samsung_clk_save(void __iomem *base,
 				    struct samsung_clk_reg_dump *rd,
 				    unsigned int num_regs)
@@ -313,3 +315,96 @@ unsigned long _get_rate(const char *clk_name)
 
 	return clk_get_rate(clk);
 }
+
+#ifdef CONFIG_PM_SLEEP
+static int exynos_clk_suspend(void)
+{
+	struct exynos_clock_reg_cache *reg_cache;
+
+	list_for_each_entry(reg_cache, &clock_reg_cache_list, node)
+		samsung_clk_save(reg_cache->reg_base, reg_cache->rdump,
+				reg_cache->rd_num);
+	return 0;
+}
+
+static void exynos_clk_resume(void)
+{
+	struct exynos_clock_reg_cache *reg_cache;
+
+	list_for_each_entry(reg_cache, &clock_reg_cache_list, node)
+		samsung_clk_restore(reg_cache->reg_base, reg_cache->rdump,
+				reg_cache->rd_num);
+}
+
+static struct syscore_ops exynos_clk_syscore_ops = {
+	.suspend = exynos_clk_suspend,
+	.resume = exynos_clk_resume,
+};
+
+static void exynos_clk_sleep_init(void __iomem *reg_base,
+		const unsigned long *rdump,
+		unsigned long nr_rdump)
+{
+	struct exynos_clock_reg_cache *reg_cache;
+
+	reg_cache = kzalloc(sizeof(struct exynos_clock_reg_cache),
+			GFP_KERNEL);
+	if (!reg_cache)
+		panic("could not allocate register reg_cache.\n");
+	reg_cache->rdump = samsung_clk_alloc_reg_dump(rdump, nr_rdump);
+
+	if (!reg_cache->rdump)
+		panic("could not allocate register dump storage.\n");
+
+	if (list_empty(&clock_reg_cache_list))
+		register_syscore_ops(&exynos_clk_syscore_ops);
+
+	reg_cache->reg_base = reg_base;
+	reg_cache->rd_num = nr_rdump;
+	list_add_tail(&reg_cache->node, &clock_reg_cache_list);
+}
+
+#else
+static void exynos_clk_sleep_init(void __iomem *reg_base,
+		const unsigned long *rdump,
+		unsigned long nr_rdump) {}
+#endif
+
+/*
+ * Common function which registers plls, muxes, dividers and gates
+ * for each CMU. It also add CMU register list to register cache.
+ */
+void __init exynos_cmu_register_one(struct device_node *np,
+			struct exynos_cmu_info *cmu)
+{
+	void __iomem *reg_base;
+	struct samsung_clk_provider *ctx;
+
+	reg_base = of_iomap(np, 0);
+	if (!reg_base)
+		panic("%s: failed to map registers\n", __func__);
+
+	ctx = samsung_clk_init(np, reg_base, cmu->nr_clk_ids);
+	if (!ctx)
+		panic("%s: unable to alllocate ctx\n", __func__);
+
+	if (cmu->pll_clks)
+		samsung_clk_register_pll(ctx, cmu->pll_clks, cmu->nr_pll_clks,
+			reg_base);
+	if (cmu->mux_clks)
+		samsung_clk_register_mux(ctx, cmu->mux_clks,
+			cmu->nr_mux_clks);
+	if (cmu->div_clks)
+		samsung_clk_register_div(ctx, cmu->div_clks, cmu->nr_div_clks);
+	if (cmu->gate_clks)
+		samsung_clk_register_gate(ctx, cmu->gate_clks,
+			cmu->nr_gate_clks);
+	if (cmu->fixed_clks)
+		samsung_clk_register_fixed_rate(ctx, cmu->fixed_clks,
+			cmu->nr_fixed_clks);
+	if (cmu->clk_regs)
+		exynos_clk_sleep_init(reg_base, cmu->clk_regs,
+			cmu->nr_clk_regs);
+
+	samsung_clk_of_add_provider(np, ctx);
+}
diff --git a/drivers/clk/samsung/clk.h b/drivers/clk/samsung/clk.h
index 66ab36b..552d155 100644
--- a/drivers/clk/samsung/clk.h
+++ b/drivers/clk/samsung/clk.h
@@ -324,6 +324,37 @@ struct samsung_pll_clock {
 	__PLL(_typ, _id, NULL, _name, _pname, CLK_GET_RATE_NOCACHE,	\
 		_lock, _con, _rtable, _alias)
 
+struct exynos_clock_reg_cache {
+	struct list_head node;
+	void __iomem *reg_base;
+	struct samsung_clk_reg_dump *rdump;
+	unsigned int rd_num;
+};
+
+struct exynos_cmu_info {
+	/* list of pll clocks and respective count */
+	struct samsung_pll_clock *pll_clks;
+	unsigned int nr_pll_clks;
+	/* list of mux clocks and respective count */
+	struct samsung_mux_clock *mux_clks;
+	unsigned int nr_mux_clks;
+	/* list of div clocks and respective count */
+	struct samsung_div_clock *div_clks;
+	unsigned int nr_div_clks;
+	/* list of gate clocks and respective count */
+	struct samsung_gate_clock *gate_clks;
+	unsigned int nr_gate_clks;
+	/* list of fixed clocks and respective count */
+	struct samsung_fixed_rate_clock *fixed_clks;
+	unsigned int nr_fixed_clks;
+	/* total number of clocks with IDs assigned*/
+	unsigned int nr_clk_ids;
+
+	/* list and number of clocks registers */
+	unsigned long *clk_regs;
+	unsigned int nr_clk_regs;
+};
+
 extern struct samsung_clk_provider *__init samsung_clk_init(
 			struct device_node *np, void __iomem *base,
 			unsigned long nr_clks);
@@ -362,6 +393,9 @@ extern void __init samsung_clk_register_pll(struct samsung_clk_provider *ctx,
 			struct samsung_pll_clock *pll_list,
 			unsigned int nr_clk, void __iomem *base);
 
+extern void __init exynos_cmu_register_one(struct device_node *,
+			struct exynos_cmu_info *);
+
 extern unsigned long _get_rate(const char *clk_name);
 
 extern void samsung_clk_save(void __iomem *base,
-- 
1.7.9.5

[PATCH v2 2/7] clk: samsung: Factor out the common code to clk.c

[Naveen Krishna Chatradhi]

While adding clock support for Exynos5260, the infrastructure to
register multiple clock controllers was introduced. Factor out the
support for registering multiple clock controller from Exynos5260
clock code to common samsung clock code so that it can be used by
other Exynos SoC which have multiple clock controllers.

Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/samsung/clk-exynos5260.c |  183 +++++-----------------------------
 drivers/clk/samsung/clk.c            |   95 ++++++++++++++++++
 drivers/clk/samsung/clk.h            |   34 +++++++
 3 files changed, 155 insertions(+), 157 deletions(-)

diff --git a/drivers/clk/samsung/clk-exynos5260.c b/drivers/clk/samsung/clk-exynos5260.c
index ce3de97..d72c982 100644
--- a/drivers/clk/samsung/clk-exynos5260.c
+++ b/drivers/clk/samsung/clk-exynos5260.c
@@ -11,10 +11,8 @@
 
 #include <linux/clk.h>
 #include <linux/clkdev.h>
-#include <linux/clk-provider.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/syscore_ops.h>
 
 #include "clk-exynos5260.h"
 #include "clk.h"
@@ -22,39 +20,6 @@
 
 #include <dt-bindings/clock/exynos5260-clk.h>
 
-static LIST_HEAD(clock_reg_cache_list);
-
-struct exynos5260_clock_reg_cache {
-	struct list_head node;
-	void __iomem *reg_base;
-	struct samsung_clk_reg_dump *rdump;
-	unsigned int rd_num;
-};
-
-struct exynos5260_cmu_info {
-	/* list of pll clocks and respective count */
-	struct samsung_pll_clock *pll_clks;
-	unsigned int nr_pll_clks;
-	/* list of mux clocks and respective count */
-	struct samsung_mux_clock *mux_clks;
-	unsigned int nr_mux_clks;
-	/* list of div clocks and respective count */
-	struct samsung_div_clock *div_clks;
-	unsigned int nr_div_clks;
-	/* list of gate clocks and respective count */
-	struct samsung_gate_clock *gate_clks;
-	unsigned int nr_gate_clks;
-	/* list of fixed clocks and respective count */
-	struct samsung_fixed_rate_clock *fixed_clks;
-	unsigned int nr_fixed_clks;
-	/* total number of clocks with IDs assigned*/
-	unsigned int nr_clk_ids;
-
-	/* list and number of clocks registers */
-	unsigned long *clk_regs;
-	unsigned int nr_clk_regs;
-};
-
 /*
  * Applicable for all 2550 Type PLLS for Exynos5260, listed below
  * DISP_PLL, EGL_PLL, KFC_PLL, MEM_PLL, BUS_PLL, MEDIA_PLL, G3D_PLL.
@@ -115,102 +80,6 @@ static struct samsung_pll_rate_table pll2650_24mhz_tbl[] __initdata = {
 
 #ifdef CONFIG_PM_SLEEP
 
-static int exynos5260_clk_suspend(void)
-{
-	struct exynos5260_clock_reg_cache *cache;
-
-	list_for_each_entry(cache, &clock_reg_cache_list, node)
-		samsung_clk_save(cache->reg_base, cache->rdump,
-				cache->rd_num);
-
-	return 0;
-}
-
-static void exynos5260_clk_resume(void)
-{
-	struct exynos5260_clock_reg_cache *cache;
-
-	list_for_each_entry(cache, &clock_reg_cache_list, node)
-		samsung_clk_restore(cache->reg_base, cache->rdump,
-				cache->rd_num);
-}
-
-static struct syscore_ops exynos5260_clk_syscore_ops = {
-	.suspend = exynos5260_clk_suspend,
-	.resume = exynos5260_clk_resume,
-};
-
-static void exynos5260_clk_sleep_init(void __iomem *reg_base,
-			unsigned long *rdump,
-			unsigned long nr_rdump)
-{
-	struct exynos5260_clock_reg_cache *reg_cache;
-
-	reg_cache = kzalloc(sizeof(struct exynos5260_clock_reg_cache),
-			GFP_KERNEL);
-	if (!reg_cache)
-		panic("could not allocate register cache.\n");
-
-	reg_cache->rdump = samsung_clk_alloc_reg_dump(rdump, nr_rdump);
-
-	if (!reg_cache->rdump)
-		panic("could not allocate register dump storage.\n");
-
-	if (list_empty(&clock_reg_cache_list))
-		register_syscore_ops(&exynos5260_clk_syscore_ops);
-
-	reg_cache->rd_num = nr_rdump;
-	reg_cache->reg_base = reg_base;
-	list_add_tail(&reg_cache->node, &clock_reg_cache_list);
-}
-
-#else
-static void exynos5260_clk_sleep_init(void __iomem *reg_base,
-			unsigned long *rdump,
-			unsigned long nr_rdump){}
-#endif
-
-/*
- * Common function which registers plls, muxes, dividers and gates
- * for each CMU. It also add CMU register list to register cache.
- */
-
-void __init exynos5260_cmu_register_one(struct device_node *np,
-			struct exynos5260_cmu_info *cmu)
-{
-	void __iomem *reg_base;
-	struct samsung_clk_provider *ctx;
-
-	reg_base = of_iomap(np, 0);
-	if (!reg_base)
-		panic("%s: failed to map registers\n", __func__);
-
-	ctx = samsung_clk_init(np, reg_base, cmu->nr_clk_ids);
-	if (!ctx)
-		panic("%s: unable to alllocate ctx\n", __func__);
-
-	if (cmu->pll_clks)
-		samsung_clk_register_pll(ctx, cmu->pll_clks, cmu->nr_pll_clks,
-			reg_base);
-	if (cmu->mux_clks)
-		samsung_clk_register_mux(ctx,  cmu->mux_clks,
-			cmu->nr_mux_clks);
-	if (cmu->div_clks)
-		samsung_clk_register_div(ctx, cmu->div_clks, cmu->nr_div_clks);
-	if (cmu->gate_clks)
-		samsung_clk_register_gate(ctx, cmu->gate_clks,
-			cmu->nr_gate_clks);
-	if (cmu->fixed_clks)
-		samsung_clk_register_fixed_rate(ctx, cmu->fixed_clks,
-			cmu->nr_fixed_clks);
-	if (cmu->clk_regs)
-		exynos5260_clk_sleep_init(reg_base, cmu->clk_regs,
-			cmu->nr_clk_regs);
-
-	samsung_clk_of_add_provider(np, ctx);
-}
-
-
 /* CMU_AUD */
 
 static unsigned long aud_clk_regs[] __initdata = {
@@ -268,7 +137,7 @@ struct samsung_gate_clock aud_gate_clks[] __initdata = {
 
 static void __init exynos5260_clk_aud_init(struct device_node *np)
 {
-	struct exynos5260_cmu_info cmu = {0};
+	struct exynos_cmu_info cmu = {0};
 
 	cmu.mux_clks = aud_mux_clks;
 	cmu.nr_mux_clks = ARRAY_SIZE(aud_mux_clks);
@@ -280,7 +149,7 @@ static void __init exynos5260_clk_aud_init(struct device_node *np)
 	cmu.clk_regs = aud_clk_regs;
 	cmu.nr_clk_regs = ARRAY_SIZE(aud_clk_regs);
 
-	exynos5260_cmu_register_one(np, &cmu);
+	exynos_cmu_register_one(np, &cmu);
 }
 
 CLK_OF_DECLARE(exynos5260_clk_aud, "samsung,exynos5260-clock-aud",
@@ -458,7 +327,7 @@ struct samsung_gate_clock disp_gate_clks[] __initdata = {
 
 static void __init exynos5260_clk_disp_init(struct device_node *np)
 {
-	struct exynos5260_cmu_info cmu = {0};
+	struct exynos_cmu_info cmu = {0};
 
 	cmu.mux_clks = disp_mux_clks;
 	cmu.nr_mux_clks = ARRAY_SIZE(disp_mux_clks);
@@ -470,7 +339,7 @@ static void __init exynos5260_clk_disp_init(struct device_node *np)
 	cmu.clk_regs = disp_clk_regs;
 	cmu.nr_clk_regs = ARRAY_SIZE(disp_clk_regs);
 
-	exynos5260_cmu_register_one(np, &cmu);
+	exynos_cmu_register_one(np, &cmu);
 }
 
 CLK_OF_DECLARE(exynos5260_clk_disp, "samsung,exynos5260-clock-disp",
@@ -522,7 +391,7 @@ static struct samsung_pll_clock egl_pll_clks[] __initdata = {
 
 static void __init exynos5260_clk_egl_init(struct device_node *np)
 {
-	struct exynos5260_cmu_info cmu = {0};
+	struct exynos_cmu_info cmu = {0};
 
 	cmu.pll_clks = egl_pll_clks;
 	cmu.nr_pll_clks =  ARRAY_SIZE(egl_pll_clks);
@@ -534,7 +403,7 @@ static void __init exynos5260_clk_egl_init(struct device_node *np)
 	cmu.clk_regs = egl_clk_regs;
 	cmu.nr_clk_regs = ARRAY_SIZE(egl_clk_regs);
 
-	exynos5260_cmu_register_one(np, &cmu);
+	exynos_cmu_register_one(np, &cmu);
 }
 
 CLK_OF_DECLARE(exynos5260_clk_egl, "samsung,exynos5260-clock-egl",
@@ -624,7 +493,7 @@ struct samsung_gate_clock fsys_gate_clks[] __initdata = {
 
 static void __init exynos5260_clk_fsys_init(struct device_node *np)
 {
-	struct exynos5260_cmu_info cmu = {0};
+	struct exynos_cmu_info cmu = {0};
 
 	cmu.mux_clks = fsys_mux_clks;
 	cmu.nr_mux_clks = ARRAY_SIZE(fsys_mux_clks);
@@ -634,7 +503,7 @@ static void __init exynos5260_clk_fsys_init(struct device_node *np)
 	cmu.clk_regs = fsys_clk_regs;
 	cmu.nr_clk_regs = ARRAY_SIZE(fsys_clk_regs);
 
-	exynos5260_cmu_register_one(np, &cmu);
+	exynos_cmu_register_one(np, &cmu);
 }
 
 CLK_OF_DECLARE(exynos5260_clk_fsys, "samsung,exynos5260-clock-fsys",
@@ -713,7 +582,7 @@ struct samsung_gate_clock g2d_gate_clks[] __initdata = {
 
 static void __init exynos5260_clk_g2d_init(struct device_node *np)
 {
-	struct exynos5260_cmu_info cmu = {0};
+	struct exynos_cmu_info cmu = {0};
 
 	cmu.mux_clks = g2d_mux_clks;
 	cmu.nr_mux_clks = ARRAY_SIZE(g2d_mux_clks);
@@ -725,7 +594,7 @@ static void __init exynos5260_clk_g2d_init(struct device_node *np)
 	cmu.clk_regs = g2d_clk_regs;
 	cmu.nr_clk_regs = ARRAY_SIZE(g2d_clk_regs);
 
-	exynos5260_cmu_register_one(np, &cmu);
+	exynos_cmu_register_one(np, &cmu);
 }
 
 CLK_OF_DECLARE(exynos5260_clk_g2d, "samsung,exynos5260-clock-g2d",
@@ -774,7 +643,7 @@ static struct samsung_pll_clock g3d_pll_clks[] __initdata = {
 
 static void __init exynos5260_clk_g3d_init(struct device_node *np)
 {
-	struct exynos5260_cmu_info cmu = {0};
+	struct exynos_cmu_info cmu = {0};
 
 	cmu.pll_clks = g3d_pll_clks;
 	cmu.nr_pll_clks =  ARRAY_SIZE(g3d_pll_clks);
@@ -788,7 +657,7 @@ static void __init exynos5260_clk_g3d_init(struct device_node *np)
 	cmu.clk_regs = g3d_clk_regs;
 	cmu.nr_clk_regs = ARRAY_SIZE(g3d_clk_regs);
 
-	exynos5260_cmu_register_one(np, &cmu);
+	exynos_cmu_register_one(np, &cmu);
 }
 
 CLK_OF_DECLARE(exynos5260_clk_g3d, "samsung,exynos5260-clock-g3d",
@@ -909,7 +778,7 @@ struct samsung_gate_clock gscl_gate_clks[] __initdata = {
 
 static void __init exynos5260_clk_gscl_init(struct device_node *np)
 {
-	struct exynos5260_cmu_info cmu = {0};
+	struct exynos_cmu_info cmu = {0};
 
 	cmu.mux_clks = gscl_mux_clks;
 	cmu.nr_mux_clks = ARRAY_SIZE(gscl_mux_clks);
@@ -921,7 +790,7 @@ static void __init exynos5260_clk_gscl_init(struct device_node *np)
 	cmu.clk_regs = gscl_clk_regs;
 	cmu.nr_clk_regs = ARRAY_SIZE(gscl_clk_regs);
 
-	exynos5260_cmu_register_one(np, &cmu);
+	exynos_cmu_register_one(np, &cmu);
 }
 
 CLK_OF_DECLARE(exynos5260_clk_gscl, "samsung,exynos5260-clock-gscl",
@@ -1028,7 +897,7 @@ struct samsung_gate_clock isp_gate_clks[] __initdata = {
 
 static void __init exynos5260_clk_isp_init(struct device_node *np)
 {
-	struct exynos5260_cmu_info cmu = {0};
+	struct exynos_cmu_info cmu = {0};
 
 	cmu.mux_clks = isp_mux_clks;
 	cmu.nr_mux_clks = ARRAY_SIZE(isp_mux_clks);
@@ -1040,7 +909,7 @@ static void __init exynos5260_clk_isp_init(struct device_node *np)
 	cmu.clk_regs = isp_clk_regs;
 	cmu.nr_clk_regs = ARRAY_SIZE(isp_clk_regs);
 
-	exynos5260_cmu_register_one(np, &cmu);
+	exynos_cmu_register_one(np, &cmu);
 }
 
 CLK_OF_DECLARE(exynos5260_clk_isp, "samsung,exynos5260-clock-isp",
@@ -1092,7 +961,7 @@ static struct samsung_pll_clock kfc_pll_clks[] __initdata = {
 
 static void __init exynos5260_clk_kfc_init(struct device_node *np)
 {
-	struct exynos5260_cmu_info cmu = {0};
+	struct exynos_cmu_info cmu = {0};
 
 	cmu.pll_clks = kfc_pll_clks;
 	cmu.nr_pll_clks =  ARRAY_SIZE(kfc_pll_clks);
@@ -1104,7 +973,7 @@ static void __init exynos5260_clk_kfc_init(struct device_node *np)
 	cmu.clk_regs = kfc_clk_regs;
 	cmu.nr_clk_regs = ARRAY_SIZE(kfc_clk_regs);
 
-	exynos5260_cmu_register_one(np, &cmu);
+	exynos_cmu_register_one(np, &cmu);
 }
 
 CLK_OF_DECLARE(exynos5260_clk_kfc, "samsung,exynos5260-clock-kfc",
@@ -1148,7 +1017,7 @@ struct samsung_gate_clock mfc_gate_clks[] __initdata = {
 
 static void __init exynos5260_clk_mfc_init(struct device_node *np)
 {
-	struct exynos5260_cmu_info cmu = {0};
+	struct exynos_cmu_info cmu = {0};
 
 	cmu.mux_clks = mfc_mux_clks;
 	cmu.nr_mux_clks = ARRAY_SIZE(mfc_mux_clks);
@@ -1160,7 +1029,7 @@ static void __init exynos5260_clk_mfc_init(struct device_node *np)
 	cmu.clk_regs = mfc_clk_regs;
 	cmu.nr_clk_regs = ARRAY_SIZE(mfc_clk_regs);
 
-	exynos5260_cmu_register_one(np, &cmu);
+	exynos_cmu_register_one(np, &cmu);
 }
 
 CLK_OF_DECLARE(exynos5260_clk_mfc, "samsung,exynos5260-clock-mfc",
@@ -1295,7 +1164,7 @@ static struct samsung_pll_clock mif_pll_clks[] __initdata = {
 
 static void __init exynos5260_clk_mif_init(struct device_node *np)
 {
-	struct exynos5260_cmu_info cmu = {0};
+	struct exynos_cmu_info cmu = {0};
 
 	cmu.pll_clks = mif_pll_clks;
 	cmu.nr_pll_clks =  ARRAY_SIZE(mif_pll_clks);
@@ -1309,7 +1178,7 @@ static void __init exynos5260_clk_mif_init(struct device_node *np)
 	cmu.clk_regs = mif_clk_regs;
 	cmu.nr_clk_regs = ARRAY_SIZE(mif_clk_regs);
 
-	exynos5260_cmu_register_one(np, &cmu);
+	exynos_cmu_register_one(np, &cmu);
 }
 
 CLK_OF_DECLARE(exynos5260_clk_mif, "samsung,exynos5260-clock-mif",
@@ -1503,7 +1372,7 @@ struct samsung_gate_clock peri_gate_clks[] __initdata = {
 
 static void __init exynos5260_clk_peri_init(struct device_node *np)
 {
-	struct exynos5260_cmu_info cmu = {0};
+	struct exynos_cmu_info cmu = {0};
 
 	cmu.mux_clks = peri_mux_clks;
 	cmu.nr_mux_clks = ARRAY_SIZE(peri_mux_clks);
@@ -1515,7 +1384,7 @@ static void __init exynos5260_clk_peri_init(struct device_node *np)
 	cmu.clk_regs = peri_clk_regs;
 	cmu.nr_clk_regs = ARRAY_SIZE(peri_clk_regs);
 
-	exynos5260_cmu_register_one(np, &cmu);
+	exynos_cmu_register_one(np, &cmu);
 }
 
 CLK_OF_DECLARE(exynos5260_clk_peri, "samsung,exynos5260-clock-peri",
@@ -1959,7 +1828,7 @@ static struct samsung_pll_clock top_pll_clks[] __initdata = {
 
 static void __init exynos5260_clk_top_init(struct device_node *np)
 {
-	struct exynos5260_cmu_info cmu = {0};
+	struct exynos_cmu_info cmu = {0};
 
 	cmu.pll_clks = top_pll_clks;
 	cmu.nr_pll_clks =  ARRAY_SIZE(top_pll_clks);
@@ -1975,7 +1844,7 @@ static void __init exynos5260_clk_top_init(struct device_node *np)
 	cmu.clk_regs = top_clk_regs;
 	cmu.nr_clk_regs = ARRAY_SIZE(top_clk_regs);
 
-	exynos5260_cmu_register_one(np, &cmu);
+	exynos_cmu_register_one(np, &cmu);
 }
 
 CLK_OF_DECLARE(exynos5260_clk_top, "samsung,exynos5260-clock-top",
diff --git a/drivers/clk/samsung/clk.c b/drivers/clk/samsung/clk.c
index deab84d..a043654 100644
--- a/drivers/clk/samsung/clk.c
+++ b/drivers/clk/samsung/clk.c
@@ -14,6 +14,8 @@
 #include <linux/syscore_ops.h>
 #include "clk.h"
 
+static LIST_HEAD(clock_reg_cache_list);
+
 void samsung_clk_save(void __iomem *base,
 				    struct samsung_clk_reg_dump *rd,
 				    unsigned int num_regs)
@@ -313,3 +315,96 @@ unsigned long _get_rate(const char *clk_name)
 
 	return clk_get_rate(clk);
 }
+
+#ifdef CONFIG_PM_SLEEP
+static int exynos_clk_suspend(void)
+{
+	struct exynos_clock_reg_cache *reg_cache;
+
+	list_for_each_entry(reg_cache, &clock_reg_cache_list, node)
+		samsung_clk_save(reg_cache->reg_base, reg_cache->rdump,
+				reg_cache->rd_num);
+	return 0;
+}
+
+static void exynos_clk_resume(void)
+{
+	struct exynos_clock_reg_cache *reg_cache;
+
+	list_for_each_entry(reg_cache, &clock_reg_cache_list, node)
+		samsung_clk_restore(reg_cache->reg_base, reg_cache->rdump,
+				reg_cache->rd_num);
+}
+
+static struct syscore_ops exynos_clk_syscore_ops = {
+	.suspend = exynos_clk_suspend,
+	.resume = exynos_clk_resume,
+};
+
+static void exynos_clk_sleep_init(void __iomem *reg_base,
+		const unsigned long *rdump,
+		unsigned long nr_rdump)
+{
+	struct exynos_clock_reg_cache *reg_cache;
+
+	reg_cache = kzalloc(sizeof(struct exynos_clock_reg_cache),
+			GFP_KERNEL);
+	if (!reg_cache)
+		panic("could not allocate register reg_cache.\n");
+	reg_cache->rdump = samsung_clk_alloc_reg_dump(rdump, nr_rdump);
+
+	if (!reg_cache->rdump)
+		panic("could not allocate register dump storage.\n");
+
+	if (list_empty(&clock_reg_cache_list))
+		register_syscore_ops(&exynos_clk_syscore_ops);
+
+	reg_cache->reg_base = reg_base;
+	reg_cache->rd_num = nr_rdump;
+	list_add_tail(&reg_cache->node, &clock_reg_cache_list);
+}
+
+#else
+static void exynos_clk_sleep_init(void __iomem *reg_base,
+		const unsigned long *rdump,
+		unsigned long nr_rdump) {}
+#endif
+
+/*
+ * Common function which registers plls, muxes, dividers and gates
+ * for each CMU. It also add CMU register list to register cache.
+ */
+void __init exynos_cmu_register_one(struct device_node *np,
+			struct exynos_cmu_info *cmu)
+{
+	void __iomem *reg_base;
+	struct samsung_clk_provider *ctx;
+
+	reg_base = of_iomap(np, 0);
+	if (!reg_base)
+		panic("%s: failed to map registers\n", __func__);
+
+	ctx = samsung_clk_init(np, reg_base, cmu->nr_clk_ids);
+	if (!ctx)
+		panic("%s: unable to alllocate ctx\n", __func__);
+
+	if (cmu->pll_clks)
+		samsung_clk_register_pll(ctx, cmu->pll_clks, cmu->nr_pll_clks,
+			reg_base);
+	if (cmu->mux_clks)
+		samsung_clk_register_mux(ctx, cmu->mux_clks,
+			cmu->nr_mux_clks);
+	if (cmu->div_clks)
+		samsung_clk_register_div(ctx, cmu->div_clks, cmu->nr_div_clks);
+	if (cmu->gate_clks)
+		samsung_clk_register_gate(ctx, cmu->gate_clks,
+			cmu->nr_gate_clks);
+	if (cmu->fixed_clks)
+		samsung_clk_register_fixed_rate(ctx, cmu->fixed_clks,
+			cmu->nr_fixed_clks);
+	if (cmu->clk_regs)
+		exynos_clk_sleep_init(reg_base, cmu->clk_regs,
+			cmu->nr_clk_regs);
+
+	samsung_clk_of_add_provider(np, ctx);
+}
diff --git a/drivers/clk/samsung/clk.h b/drivers/clk/samsung/clk.h
index 66ab36b..552d155 100644
--- a/drivers/clk/samsung/clk.h
+++ b/drivers/clk/samsung/clk.h
@@ -324,6 +324,37 @@ struct samsung_pll_clock {
 	__PLL(_typ, _id, NULL, _name, _pname, CLK_GET_RATE_NOCACHE,	\
 		_lock, _con, _rtable, _alias)
 
+struct exynos_clock_reg_cache {
+	struct list_head node;
+	void __iomem *reg_base;
+	struct samsung_clk_reg_dump *rdump;
+	unsigned int rd_num;
+};
+
+struct exynos_cmu_info {
+	/* list of pll clocks and respective count */
+	struct samsung_pll_clock *pll_clks;
+	unsigned int nr_pll_clks;
+	/* list of mux clocks and respective count */
+	struct samsung_mux_clock *mux_clks;
+	unsigned int nr_mux_clks;
+	/* list of div clocks and respective count */
+	struct samsung_div_clock *div_clks;
+	unsigned int nr_div_clks;
+	/* list of gate clocks and respective count */
+	struct samsung_gate_clock *gate_clks;
+	unsigned int nr_gate_clks;
+	/* list of fixed clocks and respective count */
+	struct samsung_fixed_rate_clock *fixed_clks;
+	unsigned int nr_fixed_clks;
+	/* total number of clocks with IDs assigned*/
+	unsigned int nr_clk_ids;
+
+	/* list and number of clocks registers */
+	unsigned long *clk_regs;
+	unsigned int nr_clk_regs;
+};
+
 extern struct samsung_clk_provider *__init samsung_clk_init(
 			struct device_node *np, void __iomem *base,
 			unsigned long nr_clks);
@@ -362,6 +393,9 @@ extern void __init samsung_clk_register_pll(struct samsung_clk_provider *ctx,
 			struct samsung_pll_clock *pll_list,
 			unsigned int nr_clk, void __iomem *base);
 
+extern void __init exynos_cmu_register_one(struct device_node *,
+			struct exynos_cmu_info *);
+
 extern unsigned long _get_rate(const char *clk_name);
 
 extern void samsung_clk_save(void __iomem *base,
-- 
1.7.9.5

[PATCH v2 3/7] clk: samsung: Add fixed_factor_clocks field to struct exynos_cmu_info

[Naveen Krishna Chatradhi]

Add the fields "fixed_factor_clks" and "nr_fixed_factor_clks" to
"struct exynos_cmu_info" to allow registering of fixed factor
clocks as well with exynos_cmu_register_one().

Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/samsung/clk.c |    3 +++
 drivers/clk/samsung/clk.h |    3 +++
 2 files changed, 6 insertions(+)

diff --git a/drivers/clk/samsung/clk.c b/drivers/clk/samsung/clk.c
index a043654..4b31267 100644
--- a/drivers/clk/samsung/clk.c
+++ b/drivers/clk/samsung/clk.c
@@ -402,6 +402,9 @@ void __init exynos_cmu_register_one(struct device_node *np,
 	if (cmu->fixed_clks)
 		samsung_clk_register_fixed_rate(ctx, cmu->fixed_clks,
 			cmu->nr_fixed_clks);
+	if (cmu->fixed_factor_clks)
+		samsung_clk_register_fixed_factor(ctx, cmu->fixed_factor_clks,
+			cmu->nr_fixed_factor_clks);
 	if (cmu->clk_regs)
 		exynos_clk_sleep_init(reg_base, cmu->clk_regs,
 			cmu->nr_clk_regs);
diff --git a/drivers/clk/samsung/clk.h b/drivers/clk/samsung/clk.h
index 552d155..993b51c 100644
--- a/drivers/clk/samsung/clk.h
+++ b/drivers/clk/samsung/clk.h
@@ -347,6 +347,9 @@ struct exynos_cmu_info {
 	/* list of fixed clocks and respective count */
 	struct samsung_fixed_rate_clock *fixed_clks;
 	unsigned int nr_fixed_clks;
+	/* list of fixed factor clocks and respective count */
+	struct samsung_fixed_factor_clock *fixed_factor_clks;
+	unsigned int nr_fixed_factor_clks;
 	/* total number of clocks with IDs assigned*/
 	unsigned int nr_clk_ids;
 
-- 
1.7.9.5

[PATCH v2 3/7] clk: samsung: Add fixed_factor_clocks field to struct exynos_cmu_info

[Naveen Krishna Chatradhi]

Add the fields "fixed_factor_clks" and "nr_fixed_factor_clks" to
"struct exynos_cmu_info" to allow registering of fixed factor
clocks as well with exynos_cmu_register_one().

Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/samsung/clk.c |    3 +++
 drivers/clk/samsung/clk.h |    3 +++
 2 files changed, 6 insertions(+)

diff --git a/drivers/clk/samsung/clk.c b/drivers/clk/samsung/clk.c
index a043654..4b31267 100644
--- a/drivers/clk/samsung/clk.c
+++ b/drivers/clk/samsung/clk.c
@@ -402,6 +402,9 @@ void __init exynos_cmu_register_one(struct device_node *np,
 	if (cmu->fixed_clks)
 		samsung_clk_register_fixed_rate(ctx, cmu->fixed_clks,
 			cmu->nr_fixed_clks);
+	if (cmu->fixed_factor_clks)
+		samsung_clk_register_fixed_factor(ctx, cmu->fixed_factor_clks,
+			cmu->nr_fixed_factor_clks);
 	if (cmu->clk_regs)
 		exynos_clk_sleep_init(reg_base, cmu->clk_regs,
 			cmu->nr_clk_regs);
diff --git a/drivers/clk/samsung/clk.h b/drivers/clk/samsung/clk.h
index 552d155..993b51c 100644
--- a/drivers/clk/samsung/clk.h
+++ b/drivers/clk/samsung/clk.h
@@ -347,6 +347,9 @@ struct exynos_cmu_info {
 	/* list of fixed clocks and respective count */
 	struct samsung_fixed_rate_clock *fixed_clks;
 	unsigned int nr_fixed_clks;
+	/* list of fixed factor clocks and respective count */
+	struct samsung_fixed_factor_clock *fixed_factor_clks;
+	unsigned int nr_fixed_factor_clks;
 	/* total number of clocks with IDs assigned*/
 	unsigned int nr_clk_ids;
 
-- 
1.7.9.5

[PATCH v2 4/7] clk: samsung: add initial clock support for Exynos7 SoC

[Naveen Krishna Chatradhi]

Add initial clock support for Exynos7 SoC which is required
to bring up platforms based on Exynos7.

Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Mike Turquette <mturquette@linaro.org>
---
 .../devicetree/bindings/clock/exynos7-clock.txt    |   37 ++
 drivers/clk/samsung/Makefile                       |    1 +
 drivers/clk/samsung/clk-exynos7.c                  |  438 ++++++++++++++++++++
 include/dt-bindings/clock/exynos7-clk.h            |   55 +++
 4 files changed, 531 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/exynos7-clock.txt
 create mode 100644 drivers/clk/samsung/clk-exynos7.c
 create mode 100644 include/dt-bindings/clock/exynos7-clk.h

diff --git a/Documentation/devicetree/bindings/clock/exynos7-clock.txt b/Documentation/devicetree/bindings/clock/exynos7-clock.txt
new file mode 100644
index 0000000..798eb10
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/exynos7-clock.txt
@@ -0,0 +1,37 @@
+* Samsung Exynos7 Clock Controller
+
+Exynos7 clock controller has various blocks which are instantiated
+independently from the device-tree. These clock controllers
+generate and supply clocks to various hardware blocks within
+the SoC.
+
+Each clock is assigned an identifier and client nodes can use
+this identifier to specify the clock which they consume. All
+available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos7-clk.h header and can be used in
+device tree sources.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It
+is expected that they are defined using standard clock bindings
+with following clock-output-names:
+
+ - "fin_pll" - PLL input clock from XXTI
+
+Required Properties for Clock Controller:
+
+ - compatible: clock controllers will use one of the following
+	compatible strings to indicate the clock controller
+	functionality.
+
+	- "samsung,exynos7-clock-topc"
+	- "samsung,exynos7-clock-top0"
+	- "samsung,exynos7-clock-peric0"
+	- "samsung,exynos7-clock-peric1"
+	- "samsung,exynos7-clock-peris"
+
+ - reg: physical base address of the controller and the length of
+	memory mapped region.
+
+ - #clock-cells: should be 1.
diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile
index 6fb4bc6..5da0ba9 100644
--- a/drivers/clk/samsung/Makefile
+++ b/drivers/clk/samsung/Makefile
@@ -18,3 +18,4 @@ obj-$(CONFIG_S3C2412_COMMON_CLK)+= clk-s3c2412.o
 obj-$(CONFIG_S3C2443_COMMON_CLK)+= clk-s3c2443.o
 obj-$(CONFIG_ARCH_S3C64XX)	+= clk-s3c64xx.o
 obj-$(CONFIG_ARCH_S5PV210)	+= clk-s5pv210.o clk-s5pv210-audss.o
+obj-$(CONFIG_ARCH_EXYNOS7)	+= clk-exynos7.o
diff --git a/drivers/clk/samsung/clk-exynos7.c b/drivers/clk/samsung/clk-exynos7.c
new file mode 100644
index 0000000..25e12b3
--- /dev/null
+++ b/drivers/clk/samsung/clk-exynos7.c
@@ -0,0 +1,438 @@
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * Author: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+
+#include "clk.h"
+#include <dt-bindings/clock/exynos7-clk.h>
+
+/* Register Offset definitions for CMU_TOPC (0x10570000) */
+#define CC_PLL_LOCK		0x0000
+#define BUS0_PLL_LOCK		0x0004
+#define BUS1_DPLL_LOCK		0x0008
+#define MFC_PLL_LOCK		0x000C
+#define AUD_PLL_LOCK		0x0010
+#define CC_PLL_CON0		0x0100
+#define BUS0_PLL_CON0		0x0110
+#define BUS1_DPLL_CON0		0x0120
+#define MFC_PLL_CON0		0x0130
+#define AUD_PLL_CON0		0x0140
+#define AUD_PLL_CON1		0x0144
+#define AUD_PLL_CON2		0x0148
+#define MIF_PLL_CON0		0x0150
+#define MIF_PLL_CON1		0x0154
+#define MIF_PLL_CON2		0x0158
+#define MUX_SEL_TOPC0		0x0200
+#define MUX_SEL_TOPC1		0x0204
+#define MUX_SEL_TOPC3		0x020C
+#define DIV_TOPC1		0x0604
+#define DIV_TOPC3		0x060C
+#define ENABLE_ACLK_TOPC1	0x0804
+#define ENABLE_SCLK_TOPC1	0x0A04
+
+static struct samsung_fixed_factor_clock topc_fixed_factor_clks[] __initdata = {
+	FFACTOR(0, "ffac_topc_bus0_pll_div2", "mout_bus0_pll_ctrl", 1, 2, 0),
+	FFACTOR(0, "ffac_topc_bus0_pll_div4",
+				"ffac_topc_bus0_pll_div2", 1, 2, 0),
+	FFACTOR(0, "ffac_topc_bus1_pll_div2", "mout_bus1_pll_ctrl", 1, 2, 0),
+	FFACTOR(0, "ffac_topc_cc_pll_div2", "mout_cc_pll_ctrl", 1, 2, 0),
+	FFACTOR(0, "ffac_topc_mfc_pll_div2", "mout_mfc_pll_ctrl", 1, 2, 0),
+};
+
+/* List of parent clocks for Muxes in CMU_TOPC */
+PNAME(mout_bus0_pll_ctrl_p)	= { "fin_pll", "fout_bus0_pll" };
+PNAME(mout_bus1_pll_ctrl_p)	= { "fin_pll", "fout_bus1_pll" };
+PNAME(mout_cc_pll_ctrl_p)	= { "fin_pll", "fout_cc_pll" };
+PNAME(mout_mfc_pll_ctrl_p)	= { "fin_pll", "fout_mfc_pll" };
+
+PNAME(mout_topc_group2)        = { "mout_sclk_bus0_pll_cmuc",
+	"mout_sclk_bus1_pll_cmuc", "mout_sclk_cc_pll_cmuc",
+	"mout_sclk_mfc_pll_cmuc" };
+
+PNAME(mout_sclk_bus0_pll_out_p)	= {"mout_bus0_pll_ctrl",
+	"ffac_topc_bus0_pll_div2"};
+
+static unsigned long topc_clk_regs[] __initdata = {
+	CC_PLL_LOCK,
+	BUS0_PLL_LOCK,
+	BUS1_DPLL_LOCK,
+	MFC_PLL_LOCK,
+	AUD_PLL_LOCK,
+	CC_PLL_CON0,
+	BUS0_PLL_CON0,
+	BUS1_DPLL_CON0,
+	MFC_PLL_CON0,
+	MUX_SEL_TOPC0,
+	MUX_SEL_TOPC1,
+	MUX_SEL_TOPC3,
+	DIV_TOPC1,
+	DIV_TOPC3,
+	ENABLE_ACLK_TOPC1,
+	ENABLE_SCLK_TOPC1,
+};
+
+static struct samsung_mux_clock topc_mux_clks[] __initdata = {
+	MUX(0, "mout_bus0_pll_ctrl", mout_bus0_pll_ctrl_p, MUX_SEL_TOPC0, 0, 1),
+	MUX(0, "mout_bus1_pll_ctrl", mout_bus1_pll_ctrl_p, MUX_SEL_TOPC0, 4, 1),
+	MUX(0, "mout_cc_pll_ctrl", mout_cc_pll_ctrl_p, MUX_SEL_TOPC0, 8, 1),
+	MUX(0, "mout_mfc_pll_ctrl", mout_mfc_pll_ctrl_p, MUX_SEL_TOPC0, 12, 1),
+
+	MUX(0, "mout_sclk_bus0_pll_out",
+			mout_sclk_bus0_pll_out_p, MUX_SEL_TOPC1, 16, 1),
+
+	MUX(0, "mout_aclk_peris_66", mout_topc_group2, MUX_SEL_TOPC3, 24, 2),
+};
+
+static struct samsung_div_clock topc_div_clks[] __initdata = {
+	DIV(0, "dout_aclk_peris_66", "mout_aclk_peris_66", DIV_TOPC1, 24, 4),
+
+	DIV(0, "dout_sclk_bus0_pll", "mout_sclk_bus0_pll_out", DIV_TOPC3, 0, 3),
+	DIV(0, "dout_sclk_bus1_pll", "mout_bus1_pll_ctrl", DIV_TOPC3, 8, 3),
+	DIV(0, "dout_sclk_cc_pll", "mout_cc_pll_ctrl", DIV_TOPC3, 12, 3),
+	DIV(0, "dout_sclk_mfc_pll", "mout_mfc_pll_ctrl", DIV_TOPC3, 16, 3),
+};
+
+static struct samsung_gate_clock topc_gate_clks[] __initdata = {
+	GATE(ACLK_PERIS_66, "aclk_peris_66", "dout_aclk_peris_66",
+		ENABLE_ACLK_TOPC1, 24, 0, 0),
+
+	GATE(SCLK_CC_PLL_A, "sclk_cc_pll_a", "dout_sclk_cc_pll",
+		ENABLE_SCLK_TOPC1, 0, 0, 0),
+	GATE(SCLK_CC_PLL_B, "sclk_cc_pll_b", "dout_sclk_cc_pll",
+		ENABLE_SCLK_TOPC1, 1, 0, 0),
+	GATE(SCLK_BUS0_PLL_A, "sclk_bus0_pll_a", "dout_sclk_bus0_pll",
+		ENABLE_SCLK_TOPC1, 4, 0, 0),
+	GATE(SCLK_BUS0_PLL_B, "sclk_bus0_pll_b", "dout_sclk_bus0_pll",
+		ENABLE_SCLK_TOPC1, 5, 0, 0),
+	GATE(SCLK_BUS1_PLL_A, "sclk_bus1_pll_a", "dout_sclk_bus1_pll",
+		ENABLE_SCLK_TOPC1, 12, 0, 0),
+	GATE(SCLK_BUS1_PLL_B, "sclk_bus1_pll_b", "dout_sclk_bus1_pll",
+		ENABLE_SCLK_TOPC1, 13, 0, 0),
+	GATE(SCLK_MFC_PLL_A, "sclk_mfc_pll_a", "dout_sclk_mfc_pll",
+		ENABLE_SCLK_TOPC1, 16, 0, 0),
+	GATE(SCLK_MFC_PLL_B, "sclk_mfc_pll_b", "dout_sclk_mfc_pll",
+		ENABLE_SCLK_TOPC1, 17, 0, 0),
+};
+
+static struct samsung_pll_clock topc_pll_clks[] __initdata = {
+	PLL(pll_1451x, 0, "fout_bus0_pll", "fin_pll",
+		BUS0_PLL_LOCK, BUS0_PLL_CON0, NULL),
+	PLL(pll_1452x, 0, "fout_cc_pll", "fin_pll",
+		CC_PLL_LOCK, CC_PLL_CON0, NULL),
+	PLL(pll_1452x, 0, "fout_bus1_pll", "fin_pll",
+		BUS1_DPLL_LOCK, BUS1_DPLL_CON0, NULL),
+	PLL(pll_1452x, 0, "fout_mfc_pll", "fin_pll",
+		MFC_PLL_LOCK, MFC_PLL_CON0, NULL),
+	PLL(pll_1460x, 0, "fout_aud_pll", "fin_pll",
+		AUD_PLL_LOCK, AUD_PLL_CON0, NULL),
+};
+
+static void __init exynos7_clk_topc_init(struct device_node *np)
+{
+	struct exynos_cmu_info cmu = {0};
+
+	cmu.pll_clks = topc_pll_clks;
+	cmu.nr_pll_clks = ARRAY_SIZE(topc_pll_clks);
+	cmu.mux_clks = topc_mux_clks;
+	cmu.nr_mux_clks = ARRAY_SIZE(topc_mux_clks);
+	cmu.div_clks = topc_div_clks;
+	cmu.nr_div_clks = ARRAY_SIZE(topc_div_clks);
+	cmu.gate_clks = topc_gate_clks;
+	cmu.nr_gate_clks = ARRAY_SIZE(topc_gate_clks);
+	cmu.fixed_factor_clks = topc_fixed_factor_clks;
+	cmu.nr_fixed_factor_clks = ARRAY_SIZE(topc_fixed_factor_clks);
+	cmu.nr_clk_ids = TOPC_NR_CLK;
+	cmu.clk_regs = topc_clk_regs;
+	cmu.nr_clk_regs = ARRAY_SIZE(topc_clk_regs);
+
+	exynos_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos7_clk_topc, "samsung,exynos7-clock-topc",
+		exynos7_clk_topc_init);
+
+/* Register Offset definitions for CMU_TOP0 (0x105D0000) */
+#define MUX_SEL_TOP00			0x0200
+#define MUX_SEL_TOP01			0x0204
+#define MUX_SEL_TOP03			0x020C
+#define MUX_SEL_TOP0_PERIC3		0x023C
+#define DIV_TOP03			0x060C
+#define DIV_TOP0_PERIC3			0x063C
+#define ENABLE_ACLK_TOP03		0x080C
+#define ENABLE_SCLK_TOP0_PERIC3		0x0A3C
+
+/* List of parent clocks for Muxes in CMU_TOP0 */
+PNAME(mout_bus0_pll_p)	= { "fin_pll", "sclk_bus0_pll_a" };
+PNAME(mout_bus1_pll_p)	= { "fin_pll", "sclk_bus1_pll_a" };
+PNAME(mout_cc_pll_p)	= { "fin_pll", "sclk_cc_pll_a" };
+PNAME(mout_mfc_pll_p)	= { "fin_pll", "sclk_mfc_pll_a" };
+
+PNAME(mout_top0_half_bus0_pll_p) = {"mout_top0_bus0_pll",
+	"ffac_top0_bus0_pll_div2"};
+PNAME(mout_top0_half_bus1_pll_p) = {"mout_top0_bus1_pll",
+	"ffac_top0_bus1_pll_div2"};
+PNAME(mout_top0_half_cc_pll_p) = {"mout_top0_cc_pll",
+	"ffac_top0_cc_pll_div2"};
+PNAME(mout_top0_half_mfc_pll_p) = {"mout_top0_mfc_pll",
+	"ffac_top0_mfc_pll_div2"};
+
+PNAME(mout_top0_group1)	= {"mout_top0_half_bus0_pll",
+	"mout_top0_half_bus1_pll", "mout_top0_half_cc_pll",
+	"mout_top0_half_mfc_pll"};
+
+static unsigned long top0_clk_regs[] __initdata = {
+	MUX_SEL_TOP00,
+	MUX_SEL_TOP01,
+	MUX_SEL_TOP03,
+	MUX_SEL_TOP0_PERIC3,
+	DIV_TOP03,
+	DIV_TOP0_PERIC3,
+	ENABLE_ACLK_TOP03,
+	ENABLE_SCLK_TOP0_PERIC3,
+};
+
+static struct samsung_mux_clock top0_mux_clks[] __initdata = {
+	MUX(0, "mout_top0_mfc_pll", mout_mfc_pll_p, MUX_SEL_TOP00, 4, 1),
+	MUX(0, "mout_top0_cc_pll", mout_cc_pll_p, MUX_SEL_TOP00, 8, 1),
+	MUX(0, "mout_top0_bus1_pll", mout_bus1_pll_p, MUX_SEL_TOP00, 12, 1),
+	MUX(0, "mout_top0_bus0_pll", mout_bus0_pll_p, MUX_SEL_TOP00, 16, 1),
+
+	MUX(0, "mout_top0_half_mfc_pll",
+			mout_top0_half_mfc_pll_p, MUX_SEL_TOP01, 4, 1),
+	MUX(0, "mout_top0_half_cc_pll",
+			mout_top0_half_cc_pll_p, MUX_SEL_TOP01, 8, 1),
+	MUX(0, "mout_top0_half_bus1_pll",
+			mout_top0_half_bus1_pll_p, MUX_SEL_TOP01, 12, 1),
+	MUX(0, "mout_top0_half_bus0_pll",
+			mout_top0_half_bus0_pll_p, MUX_SEL_TOP01, 16, 1),
+
+	MUX(0, "mout_aclk_peric1_66", mout_top0_group1,	MUX_SEL_TOP03, 12, 2),
+	MUX(0, "mout_aclk_peric0_66", mout_top0_group1, MUX_SEL_TOP03, 20, 2),
+
+	MUX(0, "mout_sclk_uart3", mout_top0_group1, MUX_SEL_TOP0_PERIC3, 4, 2),
+	MUX(0, "mout_sclk_uart2", mout_top0_group1, MUX_SEL_TOP0_PERIC3, 8, 2),
+	MUX(0, "mout_sclk_uart1", mout_top0_group1, MUX_SEL_TOP0_PERIC3, 12, 2),
+	MUX(0, "mout_sclk_uart0", mout_top0_group1, MUX_SEL_TOP0_PERIC3, 16, 2),
+};
+
+static struct samsung_div_clock top0_div_clks[] __initdata = {
+	DIV(0, "dout_aclk_peric1_66", "mout_aclk_peric1_66", DIV_TOP03, 12, 6),
+	DIV(0, "dout_aclk_peric0_66", "mout_aclk_peric0_66", DIV_TOP03, 20, 6),
+
+	DIV(0, "dout_sclk_uart3", "mout_sclk_uart3", DIV_TOP0_PERIC3, 4, 4),
+	DIV(0, "dout_sclk_uart2", "mout_sclk_uart2", DIV_TOP0_PERIC3, 8, 4),
+	DIV(0, "dout_sclk_uart1", "mout_sclk_uart1", DIV_TOP0_PERIC3, 12, 4),
+	DIV(0, "dout_sclk_uart0", "mout_sclk_uart0", DIV_TOP0_PERIC3, 16, 4),
+};
+
+static struct samsung_gate_clock top0_gate_clks[] __initdata = {
+	GATE(CLK_ACLK_PERIC1_66, "aclk_peric1_66", "dout_aclk_peric1_66",
+			ENABLE_ACLK_TOP03, 12, 0, 0),
+	GATE(CLK_ACLK_PERIC0_66, "aclk_peric0_66", "dout_aclk_peric0_66",
+			ENABLE_ACLK_TOP03, 20, 0, 0),
+
+	GATE(CLK_SCLK_UART3, "sclk_uart3", "dout_sclk_uart3",
+			ENABLE_SCLK_TOP0_PERIC3, 4, 0, 0),
+	GATE(CLK_SCLK_UART2, "sclk_uart2", "dout_sclk_uart2",
+			ENABLE_SCLK_TOP0_PERIC3, 8, 0, 0),
+	GATE(CLK_SCLK_UART1, "sclk_uart1", "dout_sclk_uart1",
+			ENABLE_SCLK_TOP0_PERIC3, 12, 0, 0),
+	GATE(CLK_SCLK_UART0, "sclk_uart0", "dout_sclk_uart0",
+			ENABLE_SCLK_TOP0_PERIC3, 16, 0, 0),
+};
+
+static struct samsung_fixed_factor_clock top0_fixed_factor_clks[] __initdata = {
+	FFACTOR(0, "ffac_top0_bus0_pll_div2", "mout_top0_bus0_pll", 1, 2, 0),
+	FFACTOR(0, "ffac_top0_bus1_pll_div2", "mout_top0_bus1_pll", 1, 2, 0),
+	FFACTOR(0, "ffac_top0_cc_pll_div2", "mout_top0_cc_pll", 1, 2, 0),
+	FFACTOR(0, "ffac_top0_mfc_pll_div2", "mout_top0_mfc_pll", 1, 2, 0),
+};
+
+static void __init exynos7_clk_top0_init(struct device_node *np)
+{
+	struct exynos_cmu_info cmu = {0};
+
+	cmu.mux_clks = top0_mux_clks;
+	cmu.nr_mux_clks = ARRAY_SIZE(top0_mux_clks);
+	cmu.div_clks = top0_div_clks;
+	cmu.nr_div_clks = ARRAY_SIZE(top0_div_clks);
+	cmu.gate_clks = top0_gate_clks;
+	cmu.nr_gate_clks = ARRAY_SIZE(top0_gate_clks);
+	cmu.fixed_factor_clks = top0_fixed_factor_clks;
+	cmu.nr_fixed_factor_clks = ARRAY_SIZE(top0_fixed_factor_clks);
+	cmu.nr_clk_ids = TOP0_NR_CLK;
+	cmu.clk_regs = top0_clk_regs;
+	cmu.nr_clk_regs = ARRAY_SIZE(top0_clk_regs);
+
+	exynos_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos7_clk_top0, "samsung,exynos7-clock-top0",
+		exynos7_clk_top0_init);
+
+/* Register Offset definitions for CMU_PERIC0 (0x13610000) */
+#define MUX_SEL_PERIC0			0x0200
+#define ENABLE_PCLK_PERIC0		0x0900
+#define ENABLE_SCLK_PERIC0		0x0A00
+
+/* List of parent clocks for Muxes in CMU_PERIC0 */
+PNAME(mout_aclk_peric0_66_p)	= { "fin_pll", "aclk_peric0_66" };
+PNAME(mout_sclk_uart0_p)	= { "fin_pll", "sclk_uart0" };
+
+static unsigned long peric0_clk_regs[] __initdata = {
+	MUX_SEL_PERIC0,
+	ENABLE_PCLK_PERIC0,
+	ENABLE_SCLK_PERIC0,
+};
+
+static struct samsung_mux_clock peric0_mux_clks[] __initdata = {
+	MUX(0, "mout_aclk_peric0_66_user",
+			mout_aclk_peric0_66_p, MUX_SEL_PERIC0, 0, 1),
+	MUX(0, "mout_sclk_uart0_user", mout_sclk_uart0_p,
+			MUX_SEL_PERIC0, 16, 1),
+};
+
+static struct samsung_gate_clock peric0_gate_clks[] __initdata = {
+	GATE(PCLK_UART0, "pclk_uart0", "mout_aclk_peric0_66_user",
+			ENABLE_PCLK_PERIC0, 16, 0, 0),
+
+	GATE(SCLK_UART0, "sclk_uart0_user", "mout_sclk_uart0_user",
+			ENABLE_SCLK_PERIC0, 16, 0, 0),
+};
+
+static void __init exynos7_clk_peric0_init(struct device_node *np)
+{
+	struct exynos_cmu_info cmu = {0};
+
+	cmu.mux_clks = peric0_mux_clks;
+	cmu.nr_mux_clks = ARRAY_SIZE(peric0_mux_clks);
+	cmu.gate_clks = peric0_gate_clks;
+	cmu.nr_gate_clks = ARRAY_SIZE(peric0_gate_clks);
+	cmu.nr_clk_ids = PERIC0_NR_CLK;
+	cmu.clk_regs = peric0_clk_regs;
+	cmu.nr_clk_regs = ARRAY_SIZE(peric0_clk_regs);
+
+	exynos_cmu_register_one(np, &cmu);
+}
+
+/* Register Offset definitions for CMU_PERIC1 (0x14C80000) */
+#define MUX_SEL_PERIC10			0x0200
+#define MUX_SEL_PERIC11			0x0204
+#define ENABLE_PCLK_PERIC1		0x0900
+#define ENABLE_SCLK_PERIC10		0x0A00
+
+CLK_OF_DECLARE(exynos7_clk_peric0, "samsung,exynos7-clock-peric0",
+		exynos7_clk_peric0_init);
+
+/* List of parent clocks for Muxes in CMU_PERIC1 */
+PNAME(mout_aclk_peric1_66_p)	= { "fin_pll", "aclk_peric1_66" };
+PNAME(mout_sclk_uart1_p)	= { "fin_pll", "sclk_uart1" };
+PNAME(mout_sclk_uart2_p)	= { "fin_pll", "sclk_uart2" };
+PNAME(mout_sclk_uart3_p)	= { "fin_pll", "sclk_uart3" };
+
+static unsigned long peric1_clk_regs[] __initdata = {
+	MUX_SEL_PERIC10,
+	MUX_SEL_PERIC11,
+	ENABLE_PCLK_PERIC1,
+	ENABLE_SCLK_PERIC10,
+};
+
+static struct samsung_mux_clock peric1_mux_clks[] __initdata = {
+	MUX(0, "mout_aclk_peric1_66_user",
+		mout_aclk_peric1_66_p, MUX_SEL_PERIC10, 0, 1),
+
+	MUX(0, "mout_sclk_uart1_user", mout_sclk_uart1_p,
+			MUX_SEL_PERIC11, 20, 1),
+	MUX(0, "mout_sclk_uart2_user", mout_sclk_uart2_p,
+			MUX_SEL_PERIC11, 24, 1),
+	MUX(0, "mout_sclk_uart3_user", mout_sclk_uart3_p,
+			MUX_SEL_PERIC11, 28, 1),
+};
+
+static struct samsung_gate_clock peric1_gate_clks[] __initdata = {
+	GATE(PCLK_UART1, "pclk_uart1", "mout_aclk_peric1_66_user",
+			ENABLE_PCLK_PERIC1, 9, 0, 0),
+	GATE(PCLK_UART2, "pclk_uart2", "mout_aclk_peric1_66_user",
+			ENABLE_PCLK_PERIC1, 10, 0, 0),
+	GATE(PCLK_UART3, "pclk_uart3", "mout_aclk_peric1_66_user",
+			ENABLE_PCLK_PERIC1, 11, 0, 0),
+
+	GATE(SCLK_UART1, "sclk_uart1_user", "mout_sclk_uart1_user",
+			ENABLE_SCLK_PERIC10, 9, 0, 0),
+	GATE(SCLK_UART2, "sclk_uart2_user", "mout_sclk_uart2_user",
+			ENABLE_SCLK_PERIC10, 10, 0, 0),
+	GATE(SCLK_UART3, "sclk_uart3_user", "mout_sclk_uart3_user",
+			ENABLE_SCLK_PERIC10, 11, 0, 0),
+};
+
+static void __init exynos7_clk_peric1_init(struct device_node *np)
+{
+	struct exynos_cmu_info cmu = {0};
+
+	cmu.mux_clks = peric1_mux_clks;
+	cmu.nr_mux_clks = ARRAY_SIZE(peric1_mux_clks);
+	cmu.gate_clks = peric1_gate_clks;
+	cmu.nr_gate_clks = ARRAY_SIZE(peric1_gate_clks);
+	cmu.nr_clk_ids = PERIC1_NR_CLK;
+	cmu.clk_regs = peric1_clk_regs;
+	cmu.nr_clk_regs = ARRAY_SIZE(peric1_clk_regs);
+
+	exynos_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos7_clk_peric1, "samsung,exynos7-clock-peric1",
+		exynos7_clk_peric1_init);
+
+/* Register Offset definitions for CMU_PERIS (0x10040000) */
+#define MUX_SEL_PERIS			0x0200
+#define ENABLE_PCLK_PERIS_SECURE_CHIPID	0x0910
+#define ENABLE_SCLK_PERIS_SECURE_CHIPID	0x0A10
+
+/* List of parent clocks for Muxes in CMU_PERIS */
+PNAME(mout_aclk_peris_66_p)	= { "fin_pll", "aclk_peris_66" };
+
+static unsigned long peris_clk_regs[] __initdata = {
+	MUX_SEL_PERIS,
+	ENABLE_PCLK_PERIS_SECURE_CHIPID,
+	ENABLE_SCLK_PERIS_SECURE_CHIPID,
+};
+
+static struct samsung_mux_clock peris_mux_clks[] __initdata = {
+	MUX(0, "mout_aclk_peris_66_user",
+		mout_aclk_peris_66_p, MUX_SEL_PERIS, 0, 1),
+};
+
+static struct samsung_gate_clock peris_gate_clks[] __initdata = {
+	GATE(PCLK_CHIPID, "pclk_chipid", "mout_aclk_peris_66_user",
+			ENABLE_PCLK_PERIS_SECURE_CHIPID, 0, 0, 0),
+	GATE(SCLK_CHIPID, "sclk_chipid", "fin_pll",
+			ENABLE_SCLK_PERIS_SECURE_CHIPID, 0, 0, 0),
+};
+
+static void __init exynos7_clk_peris_init(struct device_node *np)
+{
+	struct exynos_cmu_info cmu = {0};
+
+	cmu.mux_clks = peris_mux_clks;
+	cmu.nr_mux_clks = ARRAY_SIZE(peris_mux_clks);
+	cmu.gate_clks = peris_gate_clks;
+	cmu.nr_gate_clks = ARRAY_SIZE(peris_gate_clks);
+	cmu.nr_clk_ids = PERIS_NR_CLK;
+	cmu.clk_regs = peris_clk_regs;
+	cmu.nr_clk_regs = ARRAY_SIZE(peris_clk_regs);
+
+	exynos_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos7_clk_peris, "samsung,exynos7-clock-peris",
+		exynos7_clk_peris_init);
diff --git a/include/dt-bindings/clock/exynos7-clk.h b/include/dt-bindings/clock/exynos7-clk.h
new file mode 100644
index 0000000..6fb8d23
--- /dev/null
+++ b/include/dt-bindings/clock/exynos7-clk.h
@@ -0,0 +1,55 @@
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * Author: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef _DT_BINDINGS_CLOCK_EXYNOS7_H
+#define _DT_BINDINGS_CLOCK_EXYNOS7_H
+
+/* TOPC */
+#define ACLK_PERIS_66			1
+#define SCLK_CC_PLL_A			2
+#define SCLK_CC_PLL_B			3
+#define SCLK_BUS0_PLL_A			4
+#define SCLK_BUS0_PLL_B			5
+#define SCLK_BUS1_PLL_A			6
+#define SCLK_BUS1_PLL_B			7
+#define SCLK_MFC_PLL_A			8
+#define SCLK_MFC_PLL_B			9
+#define PERIS_66			10
+#define TOPC_NR_CLK			11
+
+/* TOP0 */
+#define CLK_ACLK_PERIC1_66		1
+#define CLK_ACLK_PERIC0_66		2
+#define CLK_SCLK_UART0			3
+#define CLK_SCLK_UART1			4
+#define CLK_SCLK_UART2			5
+#define CLK_SCLK_UART3			6
+#define TOP_PERIC			7
+#define TOP0_NR_CLK			8
+
+/* PERIC0 */
+#define PCLK_UART0			1
+#define SCLK_UART0			2
+#define PERIC0_NR_CLK			3
+
+/* PERIC1 */
+#define PCLK_UART1			1
+#define PCLK_UART2			2
+#define PCLK_UART3			3
+#define SCLK_UART1			4
+#define SCLK_UART2			5
+#define SCLK_UART3			6
+#define PERIC1_NR_CLK			7
+
+/* PERIS */
+#define PCLK_CHIPID		        1
+#define SCLK_CHIPID			2
+#define PERIS_NR_CLK			3
+
+#endif /* _DT_BINDINGS_CLOCK_EXYNOS7_H */
-- 
1.7.9.5

[PATCH v2 4/7] clk: samsung: add initial clock support for Exynos7 SoC

[Naveen Krishna Chatradhi]

Add initial clock support for Exynos7 SoC which is required
to bring up platforms based on Exynos7.

Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Mike Turquette <mturquette@linaro.org>
---
 .../devicetree/bindings/clock/exynos7-clock.txt    |   37 ++
 drivers/clk/samsung/Makefile                       |    1 +
 drivers/clk/samsung/clk-exynos7.c                  |  438 ++++++++++++++++++++
 include/dt-bindings/clock/exynos7-clk.h            |   55 +++
 4 files changed, 531 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/exynos7-clock.txt
 create mode 100644 drivers/clk/samsung/clk-exynos7.c
 create mode 100644 include/dt-bindings/clock/exynos7-clk.h

diff --git a/Documentation/devicetree/bindings/clock/exynos7-clock.txt b/Documentation/devicetree/bindings/clock/exynos7-clock.txt
new file mode 100644
index 0000000..798eb10
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/exynos7-clock.txt
@@ -0,0 +1,37 @@
+* Samsung Exynos7 Clock Controller
+
+Exynos7 clock controller has various blocks which are instantiated
+independently from the device-tree. These clock controllers
+generate and supply clocks to various hardware blocks within
+the SoC.
+
+Each clock is assigned an identifier and client nodes can use
+this identifier to specify the clock which they consume. All
+available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos7-clk.h header and can be used in
+device tree sources.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It
+is expected that they are defined using standard clock bindings
+with following clock-output-names:
+
+ - "fin_pll" - PLL input clock from XXTI
+
+Required Properties for Clock Controller:
+
+ - compatible: clock controllers will use one of the following
+	compatible strings to indicate the clock controller
+	functionality.
+
+	- "samsung,exynos7-clock-topc"
+	- "samsung,exynos7-clock-top0"
+	- "samsung,exynos7-clock-peric0"
+	- "samsung,exynos7-clock-peric1"
+	- "samsung,exynos7-clock-peris"
+
+ - reg: physical base address of the controller and the length of
+	memory mapped region.
+
+ - #clock-cells: should be 1.
diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile
index 6fb4bc6..5da0ba9 100644
--- a/drivers/clk/samsung/Makefile
+++ b/drivers/clk/samsung/Makefile
@@ -18,3 +18,4 @@ obj-$(CONFIG_S3C2412_COMMON_CLK)+= clk-s3c2412.o
 obj-$(CONFIG_S3C2443_COMMON_CLK)+= clk-s3c2443.o
 obj-$(CONFIG_ARCH_S3C64XX)	+= clk-s3c64xx.o
 obj-$(CONFIG_ARCH_S5PV210)	+= clk-s5pv210.o clk-s5pv210-audss.o
+obj-$(CONFIG_ARCH_EXYNOS7)	+= clk-exynos7.o
diff --git a/drivers/clk/samsung/clk-exynos7.c b/drivers/clk/samsung/clk-exynos7.c
new file mode 100644
index 0000000..25e12b3
--- /dev/null
+++ b/drivers/clk/samsung/clk-exynos7.c
@@ -0,0 +1,438 @@
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * Author: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+
+#include "clk.h"
+#include <dt-bindings/clock/exynos7-clk.h>
+
+/* Register Offset definitions for CMU_TOPC (0x10570000) */
+#define CC_PLL_LOCK		0x0000
+#define BUS0_PLL_LOCK		0x0004
+#define BUS1_DPLL_LOCK		0x0008
+#define MFC_PLL_LOCK		0x000C
+#define AUD_PLL_LOCK		0x0010
+#define CC_PLL_CON0		0x0100
+#define BUS0_PLL_CON0		0x0110
+#define BUS1_DPLL_CON0		0x0120
+#define MFC_PLL_CON0		0x0130
+#define AUD_PLL_CON0		0x0140
+#define AUD_PLL_CON1		0x0144
+#define AUD_PLL_CON2		0x0148
+#define MIF_PLL_CON0		0x0150
+#define MIF_PLL_CON1		0x0154
+#define MIF_PLL_CON2		0x0158
+#define MUX_SEL_TOPC0		0x0200
+#define MUX_SEL_TOPC1		0x0204
+#define MUX_SEL_TOPC3		0x020C
+#define DIV_TOPC1		0x0604
+#define DIV_TOPC3		0x060C
+#define ENABLE_ACLK_TOPC1	0x0804
+#define ENABLE_SCLK_TOPC1	0x0A04
+
+static struct samsung_fixed_factor_clock topc_fixed_factor_clks[] __initdata = {
+	FFACTOR(0, "ffac_topc_bus0_pll_div2", "mout_bus0_pll_ctrl", 1, 2, 0),
+	FFACTOR(0, "ffac_topc_bus0_pll_div4",
+				"ffac_topc_bus0_pll_div2", 1, 2, 0),
+	FFACTOR(0, "ffac_topc_bus1_pll_div2", "mout_bus1_pll_ctrl", 1, 2, 0),
+	FFACTOR(0, "ffac_topc_cc_pll_div2", "mout_cc_pll_ctrl", 1, 2, 0),
+	FFACTOR(0, "ffac_topc_mfc_pll_div2", "mout_mfc_pll_ctrl", 1, 2, 0),
+};
+
+/* List of parent clocks for Muxes in CMU_TOPC */
+PNAME(mout_bus0_pll_ctrl_p)	= { "fin_pll", "fout_bus0_pll" };
+PNAME(mout_bus1_pll_ctrl_p)	= { "fin_pll", "fout_bus1_pll" };
+PNAME(mout_cc_pll_ctrl_p)	= { "fin_pll", "fout_cc_pll" };
+PNAME(mout_mfc_pll_ctrl_p)	= { "fin_pll", "fout_mfc_pll" };
+
+PNAME(mout_topc_group2)        = { "mout_sclk_bus0_pll_cmuc",
+	"mout_sclk_bus1_pll_cmuc", "mout_sclk_cc_pll_cmuc",
+	"mout_sclk_mfc_pll_cmuc" };
+
+PNAME(mout_sclk_bus0_pll_out_p)	= {"mout_bus0_pll_ctrl",
+	"ffac_topc_bus0_pll_div2"};
+
+static unsigned long topc_clk_regs[] __initdata = {
+	CC_PLL_LOCK,
+	BUS0_PLL_LOCK,
+	BUS1_DPLL_LOCK,
+	MFC_PLL_LOCK,
+	AUD_PLL_LOCK,
+	CC_PLL_CON0,
+	BUS0_PLL_CON0,
+	BUS1_DPLL_CON0,
+	MFC_PLL_CON0,
+	MUX_SEL_TOPC0,
+	MUX_SEL_TOPC1,
+	MUX_SEL_TOPC3,
+	DIV_TOPC1,
+	DIV_TOPC3,
+	ENABLE_ACLK_TOPC1,
+	ENABLE_SCLK_TOPC1,
+};
+
+static struct samsung_mux_clock topc_mux_clks[] __initdata = {
+	MUX(0, "mout_bus0_pll_ctrl", mout_bus0_pll_ctrl_p, MUX_SEL_TOPC0, 0, 1),
+	MUX(0, "mout_bus1_pll_ctrl", mout_bus1_pll_ctrl_p, MUX_SEL_TOPC0, 4, 1),
+	MUX(0, "mout_cc_pll_ctrl", mout_cc_pll_ctrl_p, MUX_SEL_TOPC0, 8, 1),
+	MUX(0, "mout_mfc_pll_ctrl", mout_mfc_pll_ctrl_p, MUX_SEL_TOPC0, 12, 1),
+
+	MUX(0, "mout_sclk_bus0_pll_out",
+			mout_sclk_bus0_pll_out_p, MUX_SEL_TOPC1, 16, 1),
+
+	MUX(0, "mout_aclk_peris_66", mout_topc_group2, MUX_SEL_TOPC3, 24, 2),
+};
+
+static struct samsung_div_clock topc_div_clks[] __initdata = {
+	DIV(0, "dout_aclk_peris_66", "mout_aclk_peris_66", DIV_TOPC1, 24, 4),
+
+	DIV(0, "dout_sclk_bus0_pll", "mout_sclk_bus0_pll_out", DIV_TOPC3, 0, 3),
+	DIV(0, "dout_sclk_bus1_pll", "mout_bus1_pll_ctrl", DIV_TOPC3, 8, 3),
+	DIV(0, "dout_sclk_cc_pll", "mout_cc_pll_ctrl", DIV_TOPC3, 12, 3),
+	DIV(0, "dout_sclk_mfc_pll", "mout_mfc_pll_ctrl", DIV_TOPC3, 16, 3),
+};
+
+static struct samsung_gate_clock topc_gate_clks[] __initdata = {
+	GATE(ACLK_PERIS_66, "aclk_peris_66", "dout_aclk_peris_66",
+		ENABLE_ACLK_TOPC1, 24, 0, 0),
+
+	GATE(SCLK_CC_PLL_A, "sclk_cc_pll_a", "dout_sclk_cc_pll",
+		ENABLE_SCLK_TOPC1, 0, 0, 0),
+	GATE(SCLK_CC_PLL_B, "sclk_cc_pll_b", "dout_sclk_cc_pll",
+		ENABLE_SCLK_TOPC1, 1, 0, 0),
+	GATE(SCLK_BUS0_PLL_A, "sclk_bus0_pll_a", "dout_sclk_bus0_pll",
+		ENABLE_SCLK_TOPC1, 4, 0, 0),
+	GATE(SCLK_BUS0_PLL_B, "sclk_bus0_pll_b", "dout_sclk_bus0_pll",
+		ENABLE_SCLK_TOPC1, 5, 0, 0),
+	GATE(SCLK_BUS1_PLL_A, "sclk_bus1_pll_a", "dout_sclk_bus1_pll",
+		ENABLE_SCLK_TOPC1, 12, 0, 0),
+	GATE(SCLK_BUS1_PLL_B, "sclk_bus1_pll_b", "dout_sclk_bus1_pll",
+		ENABLE_SCLK_TOPC1, 13, 0, 0),
+	GATE(SCLK_MFC_PLL_A, "sclk_mfc_pll_a", "dout_sclk_mfc_pll",
+		ENABLE_SCLK_TOPC1, 16, 0, 0),
+	GATE(SCLK_MFC_PLL_B, "sclk_mfc_pll_b", "dout_sclk_mfc_pll",
+		ENABLE_SCLK_TOPC1, 17, 0, 0),
+};
+
+static struct samsung_pll_clock topc_pll_clks[] __initdata = {
+	PLL(pll_1451x, 0, "fout_bus0_pll", "fin_pll",
+		BUS0_PLL_LOCK, BUS0_PLL_CON0, NULL),
+	PLL(pll_1452x, 0, "fout_cc_pll", "fin_pll",
+		CC_PLL_LOCK, CC_PLL_CON0, NULL),
+	PLL(pll_1452x, 0, "fout_bus1_pll", "fin_pll",
+		BUS1_DPLL_LOCK, BUS1_DPLL_CON0, NULL),
+	PLL(pll_1452x, 0, "fout_mfc_pll", "fin_pll",
+		MFC_PLL_LOCK, MFC_PLL_CON0, NULL),
+	PLL(pll_1460x, 0, "fout_aud_pll", "fin_pll",
+		AUD_PLL_LOCK, AUD_PLL_CON0, NULL),
+};
+
+static void __init exynos7_clk_topc_init(struct device_node *np)
+{
+	struct exynos_cmu_info cmu = {0};
+
+	cmu.pll_clks = topc_pll_clks;
+	cmu.nr_pll_clks = ARRAY_SIZE(topc_pll_clks);
+	cmu.mux_clks = topc_mux_clks;
+	cmu.nr_mux_clks = ARRAY_SIZE(topc_mux_clks);
+	cmu.div_clks = topc_div_clks;
+	cmu.nr_div_clks = ARRAY_SIZE(topc_div_clks);
+	cmu.gate_clks = topc_gate_clks;
+	cmu.nr_gate_clks = ARRAY_SIZE(topc_gate_clks);
+	cmu.fixed_factor_clks = topc_fixed_factor_clks;
+	cmu.nr_fixed_factor_clks = ARRAY_SIZE(topc_fixed_factor_clks);
+	cmu.nr_clk_ids = TOPC_NR_CLK;
+	cmu.clk_regs = topc_clk_regs;
+	cmu.nr_clk_regs = ARRAY_SIZE(topc_clk_regs);
+
+	exynos_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos7_clk_topc, "samsung,exynos7-clock-topc",
+		exynos7_clk_topc_init);
+
+/* Register Offset definitions for CMU_TOP0 (0x105D0000) */
+#define MUX_SEL_TOP00			0x0200
+#define MUX_SEL_TOP01			0x0204
+#define MUX_SEL_TOP03			0x020C
+#define MUX_SEL_TOP0_PERIC3		0x023C
+#define DIV_TOP03			0x060C
+#define DIV_TOP0_PERIC3			0x063C
+#define ENABLE_ACLK_TOP03		0x080C
+#define ENABLE_SCLK_TOP0_PERIC3		0x0A3C
+
+/* List of parent clocks for Muxes in CMU_TOP0 */
+PNAME(mout_bus0_pll_p)	= { "fin_pll", "sclk_bus0_pll_a" };
+PNAME(mout_bus1_pll_p)	= { "fin_pll", "sclk_bus1_pll_a" };
+PNAME(mout_cc_pll_p)	= { "fin_pll", "sclk_cc_pll_a" };
+PNAME(mout_mfc_pll_p)	= { "fin_pll", "sclk_mfc_pll_a" };
+
+PNAME(mout_top0_half_bus0_pll_p) = {"mout_top0_bus0_pll",
+	"ffac_top0_bus0_pll_div2"};
+PNAME(mout_top0_half_bus1_pll_p) = {"mout_top0_bus1_pll",
+	"ffac_top0_bus1_pll_div2"};
+PNAME(mout_top0_half_cc_pll_p) = {"mout_top0_cc_pll",
+	"ffac_top0_cc_pll_div2"};
+PNAME(mout_top0_half_mfc_pll_p) = {"mout_top0_mfc_pll",
+	"ffac_top0_mfc_pll_div2"};
+
+PNAME(mout_top0_group1)	= {"mout_top0_half_bus0_pll",
+	"mout_top0_half_bus1_pll", "mout_top0_half_cc_pll",
+	"mout_top0_half_mfc_pll"};
+
+static unsigned long top0_clk_regs[] __initdata = {
+	MUX_SEL_TOP00,
+	MUX_SEL_TOP01,
+	MUX_SEL_TOP03,
+	MUX_SEL_TOP0_PERIC3,
+	DIV_TOP03,
+	DIV_TOP0_PERIC3,
+	ENABLE_ACLK_TOP03,
+	ENABLE_SCLK_TOP0_PERIC3,
+};
+
+static struct samsung_mux_clock top0_mux_clks[] __initdata = {
+	MUX(0, "mout_top0_mfc_pll", mout_mfc_pll_p, MUX_SEL_TOP00, 4, 1),
+	MUX(0, "mout_top0_cc_pll", mout_cc_pll_p, MUX_SEL_TOP00, 8, 1),
+	MUX(0, "mout_top0_bus1_pll", mout_bus1_pll_p, MUX_SEL_TOP00, 12, 1),
+	MUX(0, "mout_top0_bus0_pll", mout_bus0_pll_p, MUX_SEL_TOP00, 16, 1),
+
+	MUX(0, "mout_top0_half_mfc_pll",
+			mout_top0_half_mfc_pll_p, MUX_SEL_TOP01, 4, 1),
+	MUX(0, "mout_top0_half_cc_pll",
+			mout_top0_half_cc_pll_p, MUX_SEL_TOP01, 8, 1),
+	MUX(0, "mout_top0_half_bus1_pll",
+			mout_top0_half_bus1_pll_p, MUX_SEL_TOP01, 12, 1),
+	MUX(0, "mout_top0_half_bus0_pll",
+			mout_top0_half_bus0_pll_p, MUX_SEL_TOP01, 16, 1),
+
+	MUX(0, "mout_aclk_peric1_66", mout_top0_group1,	MUX_SEL_TOP03, 12, 2),
+	MUX(0, "mout_aclk_peric0_66", mout_top0_group1, MUX_SEL_TOP03, 20, 2),
+
+	MUX(0, "mout_sclk_uart3", mout_top0_group1, MUX_SEL_TOP0_PERIC3, 4, 2),
+	MUX(0, "mout_sclk_uart2", mout_top0_group1, MUX_SEL_TOP0_PERIC3, 8, 2),
+	MUX(0, "mout_sclk_uart1", mout_top0_group1, MUX_SEL_TOP0_PERIC3, 12, 2),
+	MUX(0, "mout_sclk_uart0", mout_top0_group1, MUX_SEL_TOP0_PERIC3, 16, 2),
+};
+
+static struct samsung_div_clock top0_div_clks[] __initdata = {
+	DIV(0, "dout_aclk_peric1_66", "mout_aclk_peric1_66", DIV_TOP03, 12, 6),
+	DIV(0, "dout_aclk_peric0_66", "mout_aclk_peric0_66", DIV_TOP03, 20, 6),
+
+	DIV(0, "dout_sclk_uart3", "mout_sclk_uart3", DIV_TOP0_PERIC3, 4, 4),
+	DIV(0, "dout_sclk_uart2", "mout_sclk_uart2", DIV_TOP0_PERIC3, 8, 4),
+	DIV(0, "dout_sclk_uart1", "mout_sclk_uart1", DIV_TOP0_PERIC3, 12, 4),
+	DIV(0, "dout_sclk_uart0", "mout_sclk_uart0", DIV_TOP0_PERIC3, 16, 4),
+};
+
+static struct samsung_gate_clock top0_gate_clks[] __initdata = {
+	GATE(CLK_ACLK_PERIC1_66, "aclk_peric1_66", "dout_aclk_peric1_66",
+			ENABLE_ACLK_TOP03, 12, 0, 0),
+	GATE(CLK_ACLK_PERIC0_66, "aclk_peric0_66", "dout_aclk_peric0_66",
+			ENABLE_ACLK_TOP03, 20, 0, 0),
+
+	GATE(CLK_SCLK_UART3, "sclk_uart3", "dout_sclk_uart3",
+			ENABLE_SCLK_TOP0_PERIC3, 4, 0, 0),
+	GATE(CLK_SCLK_UART2, "sclk_uart2", "dout_sclk_uart2",
+			ENABLE_SCLK_TOP0_PERIC3, 8, 0, 0),
+	GATE(CLK_SCLK_UART1, "sclk_uart1", "dout_sclk_uart1",
+			ENABLE_SCLK_TOP0_PERIC3, 12, 0, 0),
+	GATE(CLK_SCLK_UART0, "sclk_uart0", "dout_sclk_uart0",
+			ENABLE_SCLK_TOP0_PERIC3, 16, 0, 0),
+};
+
+static struct samsung_fixed_factor_clock top0_fixed_factor_clks[] __initdata = {
+	FFACTOR(0, "ffac_top0_bus0_pll_div2", "mout_top0_bus0_pll", 1, 2, 0),
+	FFACTOR(0, "ffac_top0_bus1_pll_div2", "mout_top0_bus1_pll", 1, 2, 0),
+	FFACTOR(0, "ffac_top0_cc_pll_div2", "mout_top0_cc_pll", 1, 2, 0),
+	FFACTOR(0, "ffac_top0_mfc_pll_div2", "mout_top0_mfc_pll", 1, 2, 0),
+};
+
+static void __init exynos7_clk_top0_init(struct device_node *np)
+{
+	struct exynos_cmu_info cmu = {0};
+
+	cmu.mux_clks = top0_mux_clks;
+	cmu.nr_mux_clks = ARRAY_SIZE(top0_mux_clks);
+	cmu.div_clks = top0_div_clks;
+	cmu.nr_div_clks = ARRAY_SIZE(top0_div_clks);
+	cmu.gate_clks = top0_gate_clks;
+	cmu.nr_gate_clks = ARRAY_SIZE(top0_gate_clks);
+	cmu.fixed_factor_clks = top0_fixed_factor_clks;
+	cmu.nr_fixed_factor_clks = ARRAY_SIZE(top0_fixed_factor_clks);
+	cmu.nr_clk_ids = TOP0_NR_CLK;
+	cmu.clk_regs = top0_clk_regs;
+	cmu.nr_clk_regs = ARRAY_SIZE(top0_clk_regs);
+
+	exynos_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos7_clk_top0, "samsung,exynos7-clock-top0",
+		exynos7_clk_top0_init);
+
+/* Register Offset definitions for CMU_PERIC0 (0x13610000) */
+#define MUX_SEL_PERIC0			0x0200
+#define ENABLE_PCLK_PERIC0		0x0900
+#define ENABLE_SCLK_PERIC0		0x0A00
+
+/* List of parent clocks for Muxes in CMU_PERIC0 */
+PNAME(mout_aclk_peric0_66_p)	= { "fin_pll", "aclk_peric0_66" };
+PNAME(mout_sclk_uart0_p)	= { "fin_pll", "sclk_uart0" };
+
+static unsigned long peric0_clk_regs[] __initdata = {
+	MUX_SEL_PERIC0,
+	ENABLE_PCLK_PERIC0,
+	ENABLE_SCLK_PERIC0,
+};
+
+static struct samsung_mux_clock peric0_mux_clks[] __initdata = {
+	MUX(0, "mout_aclk_peric0_66_user",
+			mout_aclk_peric0_66_p, MUX_SEL_PERIC0, 0, 1),
+	MUX(0, "mout_sclk_uart0_user", mout_sclk_uart0_p,
+			MUX_SEL_PERIC0, 16, 1),
+};
+
+static struct samsung_gate_clock peric0_gate_clks[] __initdata = {
+	GATE(PCLK_UART0, "pclk_uart0", "mout_aclk_peric0_66_user",
+			ENABLE_PCLK_PERIC0, 16, 0, 0),
+
+	GATE(SCLK_UART0, "sclk_uart0_user", "mout_sclk_uart0_user",
+			ENABLE_SCLK_PERIC0, 16, 0, 0),
+};
+
+static void __init exynos7_clk_peric0_init(struct device_node *np)
+{
+	struct exynos_cmu_info cmu = {0};
+
+	cmu.mux_clks = peric0_mux_clks;
+	cmu.nr_mux_clks = ARRAY_SIZE(peric0_mux_clks);
+	cmu.gate_clks = peric0_gate_clks;
+	cmu.nr_gate_clks = ARRAY_SIZE(peric0_gate_clks);
+	cmu.nr_clk_ids = PERIC0_NR_CLK;
+	cmu.clk_regs = peric0_clk_regs;
+	cmu.nr_clk_regs = ARRAY_SIZE(peric0_clk_regs);
+
+	exynos_cmu_register_one(np, &cmu);
+}
+
+/* Register Offset definitions for CMU_PERIC1 (0x14C80000) */
+#define MUX_SEL_PERIC10			0x0200
+#define MUX_SEL_PERIC11			0x0204
+#define ENABLE_PCLK_PERIC1		0x0900
+#define ENABLE_SCLK_PERIC10		0x0A00
+
+CLK_OF_DECLARE(exynos7_clk_peric0, "samsung,exynos7-clock-peric0",
+		exynos7_clk_peric0_init);
+
+/* List of parent clocks for Muxes in CMU_PERIC1 */
+PNAME(mout_aclk_peric1_66_p)	= { "fin_pll", "aclk_peric1_66" };
+PNAME(mout_sclk_uart1_p)	= { "fin_pll", "sclk_uart1" };
+PNAME(mout_sclk_uart2_p)	= { "fin_pll", "sclk_uart2" };
+PNAME(mout_sclk_uart3_p)	= { "fin_pll", "sclk_uart3" };
+
+static unsigned long peric1_clk_regs[] __initdata = {
+	MUX_SEL_PERIC10,
+	MUX_SEL_PERIC11,
+	ENABLE_PCLK_PERIC1,
+	ENABLE_SCLK_PERIC10,
+};
+
+static struct samsung_mux_clock peric1_mux_clks[] __initdata = {
+	MUX(0, "mout_aclk_peric1_66_user",
+		mout_aclk_peric1_66_p, MUX_SEL_PERIC10, 0, 1),
+
+	MUX(0, "mout_sclk_uart1_user", mout_sclk_uart1_p,
+			MUX_SEL_PERIC11, 20, 1),
+	MUX(0, "mout_sclk_uart2_user", mout_sclk_uart2_p,
+			MUX_SEL_PERIC11, 24, 1),
+	MUX(0, "mout_sclk_uart3_user", mout_sclk_uart3_p,
+			MUX_SEL_PERIC11, 28, 1),
+};
+
+static struct samsung_gate_clock peric1_gate_clks[] __initdata = {
+	GATE(PCLK_UART1, "pclk_uart1", "mout_aclk_peric1_66_user",
+			ENABLE_PCLK_PERIC1, 9, 0, 0),
+	GATE(PCLK_UART2, "pclk_uart2", "mout_aclk_peric1_66_user",
+			ENABLE_PCLK_PERIC1, 10, 0, 0),
+	GATE(PCLK_UART3, "pclk_uart3", "mout_aclk_peric1_66_user",
+			ENABLE_PCLK_PERIC1, 11, 0, 0),
+
+	GATE(SCLK_UART1, "sclk_uart1_user", "mout_sclk_uart1_user",
+			ENABLE_SCLK_PERIC10, 9, 0, 0),
+	GATE(SCLK_UART2, "sclk_uart2_user", "mout_sclk_uart2_user",
+			ENABLE_SCLK_PERIC10, 10, 0, 0),
+	GATE(SCLK_UART3, "sclk_uart3_user", "mout_sclk_uart3_user",
+			ENABLE_SCLK_PERIC10, 11, 0, 0),
+};
+
+static void __init exynos7_clk_peric1_init(struct device_node *np)
+{
+	struct exynos_cmu_info cmu = {0};
+
+	cmu.mux_clks = peric1_mux_clks;
+	cmu.nr_mux_clks = ARRAY_SIZE(peric1_mux_clks);
+	cmu.gate_clks = peric1_gate_clks;
+	cmu.nr_gate_clks = ARRAY_SIZE(peric1_gate_clks);
+	cmu.nr_clk_ids = PERIC1_NR_CLK;
+	cmu.clk_regs = peric1_clk_regs;
+	cmu.nr_clk_regs = ARRAY_SIZE(peric1_clk_regs);
+
+	exynos_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos7_clk_peric1, "samsung,exynos7-clock-peric1",
+		exynos7_clk_peric1_init);
+
+/* Register Offset definitions for CMU_PERIS (0x10040000) */
+#define MUX_SEL_PERIS			0x0200
+#define ENABLE_PCLK_PERIS_SECURE_CHIPID	0x0910
+#define ENABLE_SCLK_PERIS_SECURE_CHIPID	0x0A10
+
+/* List of parent clocks for Muxes in CMU_PERIS */
+PNAME(mout_aclk_peris_66_p)	= { "fin_pll", "aclk_peris_66" };
+
+static unsigned long peris_clk_regs[] __initdata = {
+	MUX_SEL_PERIS,
+	ENABLE_PCLK_PERIS_SECURE_CHIPID,
+	ENABLE_SCLK_PERIS_SECURE_CHIPID,
+};
+
+static struct samsung_mux_clock peris_mux_clks[] __initdata = {
+	MUX(0, "mout_aclk_peris_66_user",
+		mout_aclk_peris_66_p, MUX_SEL_PERIS, 0, 1),
+};
+
+static struct samsung_gate_clock peris_gate_clks[] __initdata = {
+	GATE(PCLK_CHIPID, "pclk_chipid", "mout_aclk_peris_66_user",
+			ENABLE_PCLK_PERIS_SECURE_CHIPID, 0, 0, 0),
+	GATE(SCLK_CHIPID, "sclk_chipid", "fin_pll",
+			ENABLE_SCLK_PERIS_SECURE_CHIPID, 0, 0, 0),
+};
+
+static void __init exynos7_clk_peris_init(struct device_node *np)
+{
+	struct exynos_cmu_info cmu = {0};
+
+	cmu.mux_clks = peris_mux_clks;
+	cmu.nr_mux_clks = ARRAY_SIZE(peris_mux_clks);
+	cmu.gate_clks = peris_gate_clks;
+	cmu.nr_gate_clks = ARRAY_SIZE(peris_gate_clks);
+	cmu.nr_clk_ids = PERIS_NR_CLK;
+	cmu.clk_regs = peris_clk_regs;
+	cmu.nr_clk_regs = ARRAY_SIZE(peris_clk_regs);
+
+	exynos_cmu_register_one(np, &cmu);
+}
+
+CLK_OF_DECLARE(exynos7_clk_peris, "samsung,exynos7-clock-peris",
+		exynos7_clk_peris_init);
diff --git a/include/dt-bindings/clock/exynos7-clk.h b/include/dt-bindings/clock/exynos7-clk.h
new file mode 100644
index 0000000..6fb8d23
--- /dev/null
+++ b/include/dt-bindings/clock/exynos7-clk.h
@@ -0,0 +1,55 @@
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * Author: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef _DT_BINDINGS_CLOCK_EXYNOS7_H
+#define _DT_BINDINGS_CLOCK_EXYNOS7_H
+
+/* TOPC */
+#define ACLK_PERIS_66			1
+#define SCLK_CC_PLL_A			2
+#define SCLK_CC_PLL_B			3
+#define SCLK_BUS0_PLL_A			4
+#define SCLK_BUS0_PLL_B			5
+#define SCLK_BUS1_PLL_A			6
+#define SCLK_BUS1_PLL_B			7
+#define SCLK_MFC_PLL_A			8
+#define SCLK_MFC_PLL_B			9
+#define PERIS_66			10
+#define TOPC_NR_CLK			11
+
+/* TOP0 */
+#define CLK_ACLK_PERIC1_66		1
+#define CLK_ACLK_PERIC0_66		2
+#define CLK_SCLK_UART0			3
+#define CLK_SCLK_UART1			4
+#define CLK_SCLK_UART2			5
+#define CLK_SCLK_UART3			6
+#define TOP_PERIC			7
+#define TOP0_NR_CLK			8
+
+/* PERIC0 */
+#define PCLK_UART0			1
+#define SCLK_UART0			2
+#define PERIC0_NR_CLK			3
+
+/* PERIC1 */
+#define PCLK_UART1			1
+#define PCLK_UART2			2
+#define PCLK_UART3			3
+#define SCLK_UART1			4
+#define SCLK_UART2			5
+#define SCLK_UART3			6
+#define PERIC1_NR_CLK			7
+
+/* PERIS */
+#define PCLK_CHIPID		        1
+#define SCLK_CHIPID			2
+#define PERIS_NR_CLK			3
+
+#endif /* _DT_BINDINGS_CLOCK_EXYNOS7_H */
-- 
1.7.9.5

[PATCH v2 5/7] arm64: dts: Add initial device tree support for EXYNOS7

[Naveen Krishna Chatradhi]

Add initial device tree nodes for EXYNOS7 SoC and board dts file
to support Espresso board based on Exynos7 SoC.

Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm64/boot/dts/Makefile                    |    1 +
 arch/arm64/boot/dts/exynos/exynos7-espresso.dts |   31 +++++
 arch/arm64/boot/dts/exynos/exynos7.dtsi         |  168 +++++++++++++++++++++++
 3 files changed, 200 insertions(+)
 create mode 100644 arch/arm64/boot/dts/exynos/exynos7-espresso.dts
 create mode 100644 arch/arm64/boot/dts/exynos/exynos7.dtsi

diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index c52bdb0..a3bc18a 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -1,3 +1,4 @@
+dtb-$(CONFIG_ARCH_EXYNOS7) += exynos/exynos7-espresso.dtb
 dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb foundation-v8.dtb
 dtb-$(CONFIG_ARCH_XGENE) += apm-mustang.dtb
 
diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
new file mode 100644
index 0000000..f6a8879
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
@@ -0,0 +1,31 @@
+/*
+ * SAMSUNG Exynos7 Espresso board device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos7.dtsi"
+
+/ {
+	model = "Samsung Exynos7 Espresso board based on EXYNOS7";
+	compatible = "samsung,exynos7-espresso", "samsung,exynos7";
+
+	chosen {
+		linux,stdout-path = &serial_2;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0x0 0xC0000000>;
+	};
+};
+
+&serial_2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
new file mode 100644
index 0000000..e593af55
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -0,0 +1,168 @@
+/*
+ * SAMSUNG EXYNOS7 SoC device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/clock/exynos7-clk.h>
+
+/ {
+	compatible = "samsung,exynos7";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &serial_0;
+		serial1 = &serial_1;
+		serial2 = &serial_2;
+		serial3 = &serial_3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			enable-method = "psci";
+			reg = <0x0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			enable-method = "psci";
+			reg = <0x1>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			enable-method = "psci";
+			reg = <0x2>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			enable-method = "psci";
+			reg = <0x3>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0x18000000>;
+
+		chipid@10000000 {
+			compatible = "samsung,exynos4210-chipid";
+			reg = <0x10000000 0x100>;
+		};
+
+		fin_pll: xxti {
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-output-names = "fin_pll";
+			#clock-cells = <0>;
+		};
+
+		gic: interrupt-controller@11001000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg =	<0x11001000 0x1000>,
+				<0x11002000 0x1000>,
+				<0x11004000 0x2000>,
+				<0x11006000 0x2000>;
+		};
+
+		clock_topc: clock-controller@10570000 {
+			compatible = "samsung,exynos7-clock-topc";
+			reg = <0x10570000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_top0: clock-controller@105d0000 {
+			compatible = "samsung,exynos7-clock-top0";
+			reg = <0x105d0000 0xb000>;
+			#clock-cells = <1>;
+		};
+
+		clock_peric0: clock-controller@13610000 {
+			compatible = "samsung,exynos7-clock-peric0";
+			reg = <0x13610000 0xd00>;
+			#clock-cells = <1>;
+		};
+
+		clock_peric1: clock-controller@14C80000 {
+			compatible = "samsung,exynos7-clock-peric1";
+			reg = <0x14c80000 0xd00>;
+			#clock-cells = <1>;
+		};
+
+		clock_peris: clock-controller@10040000 {
+			compatible = "samsung,exynos7-clock-peris";
+			reg = <0x10040000 0xd00>;
+			#clock-cells = <1>;
+		};
+
+		serial_0: serial@13630000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x13630000 0x100>;
+			interrupts = <0 440 0>;
+			clocks = <&clock_peric0 PCLK_UART0>, <&clock_peric0 SCLK_UART0>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		serial_1: serial@14c20000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x14c20000 0x100>;
+			interrupts = <0 456 0>;
+			clocks = <&clock_peric1 PCLK_UART1>, <&clock_peric1 SCLK_UART1>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		serial_2: serial@14c30000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x14c30000 0x100>;
+			interrupts = <0 457 0>;
+			clocks = <&clock_peric1 PCLK_UART2>, <&clock_peric1 SCLK_UART2>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		serial_3: serial@14c40000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x14c40000 0x100>;
+			interrupts = <0 458 0>;
+			clocks = <&clock_peric1 PCLK_UART3>, <&clock_peric1 SCLK_UART3>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		timer {
+			compatible = "arm,armv8-timer";
+			interrupts = <1 13 0xff01>,
+				     <1 14 0xff01>,
+				     <1 11 0xff01>,
+				     <1 10 0xff01>;
+		};
+	};
+};
-- 
1.7.9.5

[PATCH v2 5/7] arm64: dts: Add initial device tree support for EXYNOS7

[Naveen Krishna Chatradhi]

Add initial device tree nodes for EXYNOS7 SoC and board dts file
to support Espresso board based on Exynos7 SoC.

Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm64/boot/dts/Makefile                    |    1 +
 arch/arm64/boot/dts/exynos/exynos7-espresso.dts |   31 +++++
 arch/arm64/boot/dts/exynos/exynos7.dtsi         |  168 +++++++++++++++++++++++
 3 files changed, 200 insertions(+)
 create mode 100644 arch/arm64/boot/dts/exynos/exynos7-espresso.dts
 create mode 100644 arch/arm64/boot/dts/exynos/exynos7.dtsi

diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index c52bdb0..a3bc18a 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -1,3 +1,4 @@
+dtb-$(CONFIG_ARCH_EXYNOS7) += exynos/exynos7-espresso.dtb
 dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb foundation-v8.dtb
 dtb-$(CONFIG_ARCH_XGENE) += apm-mustang.dtb
 
diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
new file mode 100644
index 0000000..f6a8879
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
@@ -0,0 +1,31 @@
+/*
+ * SAMSUNG Exynos7 Espresso board device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos7.dtsi"
+
+/ {
+	model = "Samsung Exynos7 Espresso board based on EXYNOS7";
+	compatible = "samsung,exynos7-espresso", "samsung,exynos7";
+
+	chosen {
+		linux,stdout-path = &serial_2;
+	};
+
+	memory at 40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0x0 0xC0000000>;
+	};
+};
+
+&serial_2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
new file mode 100644
index 0000000..e593af55
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -0,0 +1,168 @@
+/*
+ * SAMSUNG EXYNOS7 SoC device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/clock/exynos7-clk.h>
+
+/ {
+	compatible = "samsung,exynos7";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &serial_0;
+		serial1 = &serial_1;
+		serial2 = &serial_2;
+		serial3 = &serial_3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu at 0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			enable-method = "psci";
+			reg = <0x0>;
+		};
+
+		cpu at 1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			enable-method = "psci";
+			reg = <0x1>;
+		};
+
+		cpu at 2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			enable-method = "psci";
+			reg = <0x2>;
+		};
+
+		cpu at 3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			enable-method = "psci";
+			reg = <0x3>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0x18000000>;
+
+		chipid at 10000000 {
+			compatible = "samsung,exynos4210-chipid";
+			reg = <0x10000000 0x100>;
+		};
+
+		fin_pll: xxti {
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-output-names = "fin_pll";
+			#clock-cells = <0>;
+		};
+
+		gic: interrupt-controller at 11001000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg =	<0x11001000 0x1000>,
+				<0x11002000 0x1000>,
+				<0x11004000 0x2000>,
+				<0x11006000 0x2000>;
+		};
+
+		clock_topc: clock-controller at 10570000 {
+			compatible = "samsung,exynos7-clock-topc";
+			reg = <0x10570000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_top0: clock-controller at 105d0000 {
+			compatible = "samsung,exynos7-clock-top0";
+			reg = <0x105d0000 0xb000>;
+			#clock-cells = <1>;
+		};
+
+		clock_peric0: clock-controller at 13610000 {
+			compatible = "samsung,exynos7-clock-peric0";
+			reg = <0x13610000 0xd00>;
+			#clock-cells = <1>;
+		};
+
+		clock_peric1: clock-controller at 14C80000 {
+			compatible = "samsung,exynos7-clock-peric1";
+			reg = <0x14c80000 0xd00>;
+			#clock-cells = <1>;
+		};
+
+		clock_peris: clock-controller at 10040000 {
+			compatible = "samsung,exynos7-clock-peris";
+			reg = <0x10040000 0xd00>;
+			#clock-cells = <1>;
+		};
+
+		serial_0: serial at 13630000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x13630000 0x100>;
+			interrupts = <0 440 0>;
+			clocks = <&clock_peric0 PCLK_UART0>, <&clock_peric0 SCLK_UART0>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		serial_1: serial at 14c20000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x14c20000 0x100>;
+			interrupts = <0 456 0>;
+			clocks = <&clock_peric1 PCLK_UART1>, <&clock_peric1 SCLK_UART1>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		serial_2: serial at 14c30000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x14c30000 0x100>;
+			interrupts = <0 457 0>;
+			clocks = <&clock_peric1 PCLK_UART2>, <&clock_peric1 SCLK_UART2>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		serial_3: serial at 14c40000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x14c40000 0x100>;
+			interrupts = <0 458 0>;
+			clocks = <&clock_peric1 PCLK_UART3>, <&clock_peric1 SCLK_UART3>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		timer {
+			compatible = "arm,armv8-timer";
+			interrupts = <1 13 0xff01>,
+				     <1 14 0xff01>,
+				     <1 11 0xff01>,
+				     <1 10 0xff01>;
+		};
+	};
+};
-- 
1.7.9.5

[PATCH v2 6/7] tty/serial: samsung: enable usage for 64-bit Exynos platforms

[Naveen Krishna Chatradhi]

Allow Samsung serial driver to be usable on Exynos 64-bit SoC based
platforms.

Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/Kconfig |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 26cec64..3383744 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -220,7 +220,7 @@ config SERIAL_CLPS711X_CONSOLE
 
 config SERIAL_SAMSUNG
 	tristate "Samsung SoC serial support"
-	depends on PLAT_SAMSUNG
+	depends on PLAT_SAMSUNG || ARCH_EXYNOS
 	select SERIAL_CORE
 	help
 	  Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
-- 
1.7.9.5

[PATCH v2 6/7] tty/serial: samsung: enable usage for 64-bit Exynos platforms

[Naveen Krishna Chatradhi]

Allow Samsung serial driver to be usable on Exynos 64-bit SoC based
platforms.

Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/Kconfig |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 26cec64..3383744 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -220,7 +220,7 @@ config SERIAL_CLPS711X_CONSOLE
 
 config SERIAL_SAMSUNG
 	tristate "Samsung SoC serial support"
-	depends on PLAT_SAMSUNG
+	depends on PLAT_SAMSUNG || ARCH_EXYNOS
 	select SERIAL_CORE
 	help
 	  Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
-- 
1.7.9.5

[PATCH v2 7/7] arm64: exynos7: Enable ARMv8 based Exynos7 (SoC) support

[Naveen Krishna Chatradhi]

From: Alim Akhtar <alim.akhtar@samsung.com>

This patch adds the necessary Kconfig entries to enable
support for the ARMv8 based Exynos7 SoC.

Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm64/Kconfig |   12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index fd4e81a..b4d1dc2 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -134,6 +134,18 @@ source "kernel/Kconfig.freezer"
 
 menu "Platform selection"
 
+config ARCH_EXYNOS
+	bool
+	help
+	  This enables support for Samsung Exynos SoC family
+
+config ARCH_EXYNOS7
+	bool "ARMv8 based Samsung Exynos7"
+	select ARCH_EXYNOS
+	select COMMON_CLK_SAMSUNG
+	help
+	  This enables support for Samsung Exynos7 SoC family
+
 config ARCH_VEXPRESS
 	bool "ARMv8 software model (Versatile Express)"
 	select ARCH_REQUIRE_GPIOLIB
-- 
1.7.9.5

[PATCH v2 7/7] arm64: exynos7: Enable ARMv8 based Exynos7 (SoC) support

[Naveen Krishna Chatradhi]

From: Alim Akhtar <alim.akhtar@samsung.com>

This patch adds the necessary Kconfig entries to enable
support for the ARMv8 based Exynos7 SoC.

Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm64/Kconfig |   12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index fd4e81a..b4d1dc2 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -134,6 +134,18 @@ source "kernel/Kconfig.freezer"
 
 menu "Platform selection"
 
+config ARCH_EXYNOS
+	bool
+	help
+	  This enables support for Samsung Exynos SoC family
+
+config ARCH_EXYNOS7
+	bool "ARMv8 based Samsung Exynos7"
+	select ARCH_EXYNOS
+	select COMMON_CLK_SAMSUNG
+	help
+	  This enables support for Samsung Exynos7 SoC family
+
 config ARCH_VEXPRESS
 	bool "ARMv8 software model (Versatile Express)"
 	select ARCH_REQUIRE_GPIOLIB
-- 
1.7.9.5

Re: [PATCH v2 0/7] arch: arm64: enable support for Samsung Exynos7 SoC

[Tomasz Figa]

Hi Naveen,

On 02.09.2014 17:35, Naveen Krishna Chatradhi wrote:
> Changes since v1:
> - Reduced the number of features targetted for the initial platform support.
> 

Are you going to reply to my comments to previous version?

Btw. My @samsung.com e-mail is no longer valid. Please use my private
one for patches related to Samsung clocks and pin control drivers.
Respective patch for MAINTAINERS file has been applied already.

Best regards,
Tomasz

[PATCH v2 0/7] arch: arm64: enable support for Samsung Exynos7 SoC

[Tomasz Figa]

Hi Naveen,

On 02.09.2014 17:35, Naveen Krishna Chatradhi wrote:
> Changes since v1:
> - Reduced the number of features targetted for the initial platform support.
> 

Are you going to reply to my comments to previous version?

Btw. My @samsung.com e-mail is no longer valid. Please use my private
one for patches related to Samsung clocks and pin control drivers.
Respective patch for MAINTAINERS file has been applied already.

Best regards,
Tomasz

RE: [PATCH v2 5/7] arm64: dts: Add initial device tree support for EXYNOS7

[Kukjin Kim]

Naveen Krishna Chatradhi wrote:
> 
> Add initial device tree nodes for EXYNOS7 SoC and board dts file
> to support Espresso board based on Exynos7 SoC.
> 
> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
> Cc: Rob Herring <robh@kernel.org>
> Cc: Catalin Marinas <catalin.marinas@arm.com>

NAK.

There are several exynos7 SoCs which cannot be supported with one dt file. I
mean just one exynos7 cannot represent all of exynos7 SoCs... 

> ---
>  arch/arm64/boot/dts/Makefile                    |    1 +
>  arch/arm64/boot/dts/exynos/exynos7-espresso.dts |   31 +++++
>  arch/arm64/boot/dts/exynos/exynos7.dtsi         |  168 +++++++++++++++++++++++
>  3 files changed, 200 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/exynos/exynos7-espresso.dts
>  create mode 100644 arch/arm64/boot/dts/exynos/exynos7.dtsi
> 
> diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
> index c52bdb0..a3bc18a 100644
> --- a/arch/arm64/boot/dts/Makefile
> +++ b/arch/arm64/boot/dts/Makefile
> @@ -1,3 +1,4 @@
> +dtb-$(CONFIG_ARCH_EXYNOS7) += exynos/exynos7-espresso.dtb
>  dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb foundation-v8.dtb
>  dtb-$(CONFIG_ARCH_XGENE) += apm-mustang.dtb
> 
> diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-
> espresso.dts
> new file mode 100644
> index 0000000..f6a8879
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
> @@ -0,0 +1,31 @@
> +/*
> + * SAMSUNG Exynos7 Espresso board device tree source
> + *
> + * Copyright (c) 2014 Samsung Electronics Co., Ltd.
> + *		http://www.samsung.com
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +/dts-v1/;
> +#include "exynos7.dtsi"
> +
> +/ {
> +	model = "Samsung Exynos7 Espresso board based on EXYNOS7";
> +	compatible = "samsung,exynos7-espresso", "samsung,exynos7";
> +
> +	chosen {
> +		linux,stdout-path = &serial_2;

Well...

> +	};
> +
> +	memory@40000000 {
> +		device_type = "memory";
> +		reg = <0x0 0x40000000 0x0 0xC0000000>;

The base address of system memory is depending on each board, actually some of
them are 0x20000000.

> +	};
> +};
> +
> +&serial_2 {
> +	status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
> new file mode 100644
> index 0000000..e593af55
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
> @@ -0,0 +1,168 @@
> +/*
> + * SAMSUNG EXYNOS7 SoC device tree source
> + *
> + * Copyright (c) 2014 Samsung Electronics Co., Ltd.
> + *		http://www.samsung.com
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <dt-bindings/clock/exynos7-clk.h>
> +
> +/ {
> +	compatible = "samsung,exynos7";
> +	interrupt-parent = <&gic>;
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	aliases {
> +		serial0 = &serial_0;
> +		serial1 = &serial_1;
> +		serial2 = &serial_2;
> +		serial3 = &serial_3;

There are exynos7 SoC is having 3 serial IPs...

> +	};
> +
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		cpu@0 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a57", "arm,armv8";
> +			enable-method = "psci";
> +			reg = <0x0>;
> +		};
> +
> +		cpu@1 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a57", "arm,armv8";
> +			enable-method = "psci";
> +			reg = <0x1>;
> +		};
> +
> +		cpu@2 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a57", "arm,armv8";
> +			enable-method = "psci";
> +			reg = <0x2>;
> +		};
> +
> +		cpu@3 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a57", "arm,armv8";
> +			enable-method = "psci";
> +			reg = <0x3>;
> +		};
> +	};

Naveen, please don't assume all of exynos7 SoCs are having quad a57s...

> +
> +	psci {
> +		compatible = "arm,psci-0.2";
> +		method = "smc";
> +	};
> +
> +	soc: soc {
> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0 0 0 0x18000000>;
> +
> +		chipid@10000000 {
> +			compatible = "samsung,exynos4210-chipid";
> +			reg = <0x10000000 0x100>;
> +		};
> +
> +		fin_pll: xxti {
> +			compatible = "fixed-clock";
> +			clock-frequency = <24000000>;

It's wrong on some exynos7 SoCs...

> +			clock-output-names = "fin_pll";
> +			#clock-cells = <0>;
> +		};
> +

Unfortunately the addresses are different on each exynos7 SoCs...

> +		gic: interrupt-controller@11001000 {
> +			compatible = "arm,gic-400";
> +			#interrupt-cells = <3>;
> +			#address-cells = <0>;
> +			interrupt-controller;
> +			reg =	<0x11001000 0x1000>,
> +				<0x11002000 0x1000>,
> +				<0x11004000 0x2000>,
> +				<0x11006000 0x2000>;
> +		};
> +
> +		clock_topc: clock-controller@10570000 {
> +			compatible = "samsung,exynos7-clock-topc";
> +			reg = <0x10570000 0x10000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		clock_top0: clock-controller@105d0000 {
> +			compatible = "samsung,exynos7-clock-top0";
> +			reg = <0x105d0000 0xb000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		clock_peric0: clock-controller@13610000 {
> +			compatible = "samsung,exynos7-clock-peric0";
> +			reg = <0x13610000 0xd00>;
> +			#clock-cells = <1>;
> +		};
> +
> +		clock_peric1: clock-controller@14C80000 {
> +			compatible = "samsung,exynos7-clock-peric1";
> +			reg = <0x14c80000 0xd00>;
> +			#clock-cells = <1>;
> +		};
> +
> +		clock_peris: clock-controller@10040000 {
> +			compatible = "samsung,exynos7-clock-peris";
> +			reg = <0x10040000 0xd00>;
> +			#clock-cells = <1>;
> +		};
> +
> +		serial_0: serial@13630000 {
> +			compatible = "samsung,exynos4210-uart";
> +			reg = <0x13630000 0x100>;
> +			interrupts = <0 440 0>;
> +			clocks = <&clock_peric0 PCLK_UART0>, <&clock_peric0 SCLK_UART0>;
> +			clock-names = "uart", "clk_uart_baud0";
> +			status = "disabled";
> +		};
> +
> +		serial_1: serial@14c20000 {
> +			compatible = "samsung,exynos4210-uart";
> +			reg = <0x14c20000 0x100>;
> +			interrupts = <0 456 0>;
> +			clocks = <&clock_peric1 PCLK_UART1>, <&clock_peric1 SCLK_UART1>;
> +			clock-names = "uart", "clk_uart_baud0";
> +			status = "disabled";
> +		};
> +
> +		serial_2: serial@14c30000 {
> +			compatible = "samsung,exynos4210-uart";
> +			reg = <0x14c30000 0x100>;
> +			interrupts = <0 457 0>;
> +			clocks = <&clock_peric1 PCLK_UART2>, <&clock_peric1 SCLK_UART2>;
> +			clock-names = "uart", "clk_uart_baud0";
> +			status = "disabled";
> +		};
> +
> +		serial_3: serial@14c40000 {
> +			compatible = "samsung,exynos4210-uart";
> +			reg = <0x14c40000 0x100>;
> +			interrupts = <0 458 0>;
> +			clocks = <&clock_peric1 PCLK_UART3>, <&clock_peric1 SCLK_UART3>;
> +			clock-names = "uart", "clk_uart_baud0";
> +			status = "disabled";
> +		};
> +
> +		timer {
> +			compatible = "arm,armv8-timer";
> +			interrupts = <1 13 0xff01>,
> +				     <1 14 0xff01>,
> +				     <1 11 0xff01>,
> +				     <1 10 0xff01>;
> +		};
> +	};
> +};
> --
> 1.7.9.5

So this is not acceptable...

- Kukjin

[PATCH v2 5/7] arm64: dts: Add initial device tree support for EXYNOS7

[Kukjin Kim]

Naveen Krishna Chatradhi wrote:
> 
> Add initial device tree nodes for EXYNOS7 SoC and board dts file
> to support Espresso board based on Exynos7 SoC.
> 
> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
> Cc: Rob Herring <robh@kernel.org>
> Cc: Catalin Marinas <catalin.marinas@arm.com>

NAK.

There are several exynos7 SoCs which cannot be supported with one dt file. I
mean just one exynos7 cannot represent all of exynos7 SoCs... 

> ---
>  arch/arm64/boot/dts/Makefile                    |    1 +
>  arch/arm64/boot/dts/exynos/exynos7-espresso.dts |   31 +++++
>  arch/arm64/boot/dts/exynos/exynos7.dtsi         |  168 +++++++++++++++++++++++
>  3 files changed, 200 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/exynos/exynos7-espresso.dts
>  create mode 100644 arch/arm64/boot/dts/exynos/exynos7.dtsi
> 
> diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
> index c52bdb0..a3bc18a 100644
> --- a/arch/arm64/boot/dts/Makefile
> +++ b/arch/arm64/boot/dts/Makefile
> @@ -1,3 +1,4 @@
> +dtb-$(CONFIG_ARCH_EXYNOS7) += exynos/exynos7-espresso.dtb
>  dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb foundation-v8.dtb
>  dtb-$(CONFIG_ARCH_XGENE) += apm-mustang.dtb
> 
> diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-
> espresso.dts
> new file mode 100644
> index 0000000..f6a8879
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
> @@ -0,0 +1,31 @@
> +/*
> + * SAMSUNG Exynos7 Espresso board device tree source
> + *
> + * Copyright (c) 2014 Samsung Electronics Co., Ltd.
> + *		http://www.samsung.com
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +/dts-v1/;
> +#include "exynos7.dtsi"
> +
> +/ {
> +	model = "Samsung Exynos7 Espresso board based on EXYNOS7";
> +	compatible = "samsung,exynos7-espresso", "samsung,exynos7";
> +
> +	chosen {
> +		linux,stdout-path = &serial_2;

Well...

> +	};
> +
> +	memory at 40000000 {
> +		device_type = "memory";
> +		reg = <0x0 0x40000000 0x0 0xC0000000>;

The base address of system memory is depending on each board, actually some of
them are 0x20000000.

> +	};
> +};
> +
> +&serial_2 {
> +	status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
> new file mode 100644
> index 0000000..e593af55
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
> @@ -0,0 +1,168 @@
> +/*
> + * SAMSUNG EXYNOS7 SoC device tree source
> + *
> + * Copyright (c) 2014 Samsung Electronics Co., Ltd.
> + *		http://www.samsung.com
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <dt-bindings/clock/exynos7-clk.h>
> +
> +/ {
> +	compatible = "samsung,exynos7";
> +	interrupt-parent = <&gic>;
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	aliases {
> +		serial0 = &serial_0;
> +		serial1 = &serial_1;
> +		serial2 = &serial_2;
> +		serial3 = &serial_3;

There are exynos7 SoC is having 3 serial IPs...

> +	};
> +
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		cpu at 0 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a57", "arm,armv8";
> +			enable-method = "psci";
> +			reg = <0x0>;
> +		};
> +
> +		cpu at 1 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a57", "arm,armv8";
> +			enable-method = "psci";
> +			reg = <0x1>;
> +		};
> +
> +		cpu at 2 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a57", "arm,armv8";
> +			enable-method = "psci";
> +			reg = <0x2>;
> +		};
> +
> +		cpu at 3 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a57", "arm,armv8";
> +			enable-method = "psci";
> +			reg = <0x3>;
> +		};
> +	};

Naveen, please don't assume all of exynos7 SoCs are having quad a57s...

> +
> +	psci {
> +		compatible = "arm,psci-0.2";
> +		method = "smc";
> +	};
> +
> +	soc: soc {
> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0 0 0 0x18000000>;
> +
> +		chipid at 10000000 {
> +			compatible = "samsung,exynos4210-chipid";
> +			reg = <0x10000000 0x100>;
> +		};
> +
> +		fin_pll: xxti {
> +			compatible = "fixed-clock";
> +			clock-frequency = <24000000>;

It's wrong on some exynos7 SoCs...

> +			clock-output-names = "fin_pll";
> +			#clock-cells = <0>;
> +		};
> +

Unfortunately the addresses are different on each exynos7 SoCs...

> +		gic: interrupt-controller at 11001000 {
> +			compatible = "arm,gic-400";
> +			#interrupt-cells = <3>;
> +			#address-cells = <0>;
> +			interrupt-controller;
> +			reg =	<0x11001000 0x1000>,
> +				<0x11002000 0x1000>,
> +				<0x11004000 0x2000>,
> +				<0x11006000 0x2000>;
> +		};
> +
> +		clock_topc: clock-controller at 10570000 {
> +			compatible = "samsung,exynos7-clock-topc";
> +			reg = <0x10570000 0x10000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		clock_top0: clock-controller at 105d0000 {
> +			compatible = "samsung,exynos7-clock-top0";
> +			reg = <0x105d0000 0xb000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		clock_peric0: clock-controller at 13610000 {
> +			compatible = "samsung,exynos7-clock-peric0";
> +			reg = <0x13610000 0xd00>;
> +			#clock-cells = <1>;
> +		};
> +
> +		clock_peric1: clock-controller at 14C80000 {
> +			compatible = "samsung,exynos7-clock-peric1";
> +			reg = <0x14c80000 0xd00>;
> +			#clock-cells = <1>;
> +		};
> +
> +		clock_peris: clock-controller at 10040000 {
> +			compatible = "samsung,exynos7-clock-peris";
> +			reg = <0x10040000 0xd00>;
> +			#clock-cells = <1>;
> +		};
> +
> +		serial_0: serial at 13630000 {
> +			compatible = "samsung,exynos4210-uart";
> +			reg = <0x13630000 0x100>;
> +			interrupts = <0 440 0>;
> +			clocks = <&clock_peric0 PCLK_UART0>, <&clock_peric0 SCLK_UART0>;
> +			clock-names = "uart", "clk_uart_baud0";
> +			status = "disabled";
> +		};
> +
> +		serial_1: serial at 14c20000 {
> +			compatible = "samsung,exynos4210-uart";
> +			reg = <0x14c20000 0x100>;
> +			interrupts = <0 456 0>;
> +			clocks = <&clock_peric1 PCLK_UART1>, <&clock_peric1 SCLK_UART1>;
> +			clock-names = "uart", "clk_uart_baud0";
> +			status = "disabled";
> +		};
> +
> +		serial_2: serial at 14c30000 {
> +			compatible = "samsung,exynos4210-uart";
> +			reg = <0x14c30000 0x100>;
> +			interrupts = <0 457 0>;
> +			clocks = <&clock_peric1 PCLK_UART2>, <&clock_peric1 SCLK_UART2>;
> +			clock-names = "uart", "clk_uart_baud0";
> +			status = "disabled";
> +		};
> +
> +		serial_3: serial at 14c40000 {
> +			compatible = "samsung,exynos4210-uart";
> +			reg = <0x14c40000 0x100>;
> +			interrupts = <0 458 0>;
> +			clocks = <&clock_peric1 PCLK_UART3>, <&clock_peric1 SCLK_UART3>;
> +			clock-names = "uart", "clk_uart_baud0";
> +			status = "disabled";
> +		};
> +
> +		timer {
> +			compatible = "arm,armv8-timer";
> +			interrupts = <1 13 0xff01>,
> +				     <1 14 0xff01>,
> +				     <1 11 0xff01>,
> +				     <1 10 0xff01>;
> +		};
> +	};
> +};
> --
> 1.7.9.5

So this is not acceptable...

- Kukjin

Re: [PATCH v2 5/7] arm64: dts: Add initial device tree support for EXYNOS7

[Arnd Bergmann]

On Thursday 04 September 2014 01:15:20 Kukjin Kim wrote:
> Naveen Krishna Chatradhi wrote:
>
> > diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-
> > espresso.dts
> > new file mode 100644
> > index 0000000..f6a8879
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
> > @@ -0,0 +1,31 @@
> > +/*
> > + * SAMSUNG Exynos7 Espresso board device tree source
> > + *
> > + * Copyright (c) 2014 Samsung Electronics Co., Ltd.
> > + *		http://www.samsung.com
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > +*/
> > +
> > +/dts-v1/;
> > +#include "exynos7.dtsi"
> > +
> > +/ {
> > +	model = "Samsung Exynos7 Espresso board based on EXYNOS7";
> > +	compatible = "samsung,exynos7-espresso", "samsung,exynos7";
> > +
> > +	chosen {
> > +		linux,stdout-path = &serial_2;
> 
> Well...
> 
> > +	};
> > +
> > +	memory@40000000 {
> > +		device_type = "memory";
> > +		reg = <0x0 0x40000000 0x0 0xC0000000>;
> 
> The base address of system memory is depending on each board, actually some of
> them are 0x20000000.

This is the board specific file, so it seems ok.

> > +#include <dt-bindings/clock/exynos7-clk.h>
> > +
> > +/ {
> > +	compatible = "samsung,exynos7";
> > +	interrupt-parent = <&gic>;
> > +	#address-cells = <2>;
> > +	#size-cells = <2>;
> > +
> > +	aliases {
> > +		serial0 = &serial_0;
> > +		serial1 = &serial_1;
> > +		serial2 = &serial_2;
> > +		serial3 = &serial_3;
> 
> There are exynos7 SoC is having 3 serial IPs...

These aliases should just go into the board file as well, and
since it seems to have only one uart, the best way is to list
that as serial0:

	serial0 = &serial_2;

> > +
> > +	psci {
> > +		compatible = "arm,psci-0.2";
> > +		method = "smc";
> > +	};
> > +
> > +	soc: soc {
> > +		compatible = "simple-bus";
> > +		#address-cells = <1>;
> > +		#size-cells = <1>;
> > +		ranges = <0 0 0 0x18000000>;
> > +
> > +		chipid@10000000 {
> > +			compatible = "samsung,exynos4210-chipid";
> > +			reg = <0x10000000 0x100>;
> > +		};
> > +
> > +		fin_pll: xxti {
> > +			compatible = "fixed-clock";
> > +			clock-frequency = <24000000>;
> 
> It's wrong on some exynos7 SoCs...
> 

Is this an external clock input? If so, the frequency should
also go into the board file, otherwise into the soc-specific
one.

	Arnd

[PATCH v2 5/7] arm64: dts: Add initial device tree support for EXYNOS7

[Arnd Bergmann]

On Thursday 04 September 2014 01:15:20 Kukjin Kim wrote:
> Naveen Krishna Chatradhi wrote:
>
> > diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-
> > espresso.dts
> > new file mode 100644
> > index 0000000..f6a8879
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
> > @@ -0,0 +1,31 @@
> > +/*
> > + * SAMSUNG Exynos7 Espresso board device tree source
> > + *
> > + * Copyright (c) 2014 Samsung Electronics Co., Ltd.
> > + *		http://www.samsung.com
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > +*/
> > +
> > +/dts-v1/;
> > +#include "exynos7.dtsi"
> > +
> > +/ {
> > +	model = "Samsung Exynos7 Espresso board based on EXYNOS7";
> > +	compatible = "samsung,exynos7-espresso", "samsung,exynos7";
> > +
> > +	chosen {
> > +		linux,stdout-path = &serial_2;
> 
> Well...
> 
> > +	};
> > +
> > +	memory at 40000000 {
> > +		device_type = "memory";
> > +		reg = <0x0 0x40000000 0x0 0xC0000000>;
> 
> The base address of system memory is depending on each board, actually some of
> them are 0x20000000.

This is the board specific file, so it seems ok.

> > +#include <dt-bindings/clock/exynos7-clk.h>
> > +
> > +/ {
> > +	compatible = "samsung,exynos7";
> > +	interrupt-parent = <&gic>;
> > +	#address-cells = <2>;
> > +	#size-cells = <2>;
> > +
> > +	aliases {
> > +		serial0 = &serial_0;
> > +		serial1 = &serial_1;
> > +		serial2 = &serial_2;
> > +		serial3 = &serial_3;
> 
> There are exynos7 SoC is having 3 serial IPs...

These aliases should just go into the board file as well, and
since it seems to have only one uart, the best way is to list
that as serial0:

	serial0 = &serial_2;

> > +
> > +	psci {
> > +		compatible = "arm,psci-0.2";
> > +		method = "smc";
> > +	};
> > +
> > +	soc: soc {
> > +		compatible = "simple-bus";
> > +		#address-cells = <1>;
> > +		#size-cells = <1>;
> > +		ranges = <0 0 0 0x18000000>;
> > +
> > +		chipid at 10000000 {
> > +			compatible = "samsung,exynos4210-chipid";
> > +			reg = <0x10000000 0x100>;
> > +		};
> > +
> > +		fin_pll: xxti {
> > +			compatible = "fixed-clock";
> > +			clock-frequency = <24000000>;
> 
> It's wrong on some exynos7 SoCs...
> 

Is this an external clock input? If so, the frequency should
also go into the board file, otherwise into the soc-specific
one.

	Arnd

RE: [PATCH v2 5/7] arm64: dts: Add initial device tree support for EXYNOS7

[Kukjin Kim]

Arnd Bergmann wrote:
> 
Hi, Arnd

> On Thursday 04 September 2014 01:15:20 Kukjin Kim wrote:
> > Naveen Krishna Chatradhi wrote:
> >
> > > diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-
> > > espresso.dts
> > > new file mode 100644
> > > index 0000000..f6a8879
> > > --- /dev/null
> > > +++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
> > > @@ -0,0 +1,31 @@
> > > +/*
> > > + * SAMSUNG Exynos7 Espresso board device tree source
> > > + *
> > > + * Copyright (c) 2014 Samsung Electronics Co., Ltd.
> > > + *		http://www.samsung.com
> > > + *
> > > + * This program is free software; you can redistribute it and/or modify
> > > + * it under the terms of the GNU General Public License version 2 as
> > > + * published by the Free Software Foundation.
> > > +*/
> > > +
> > > +/dts-v1/;
> > > +#include "exynos7.dtsi"
> > > +
> > > +/ {
> > > +	model = "Samsung Exynos7 Espresso board based on EXYNOS7";
> > > +	compatible = "samsung,exynos7-espresso", "samsung,exynos7";
> > > +
> > > +	chosen {
> > > +		linux,stdout-path = &serial_2;
> >
> > Well...
> >
> > > +	};
> > > +
> > > +	memory@40000000 {
> > > +		device_type = "memory";
> > > +		reg = <0x0 0x40000000 0x0 0xC0000000>;
> >
> > The base address of system memory is depending on each board, actually some of
> > them are 0x20000000.
> 
> This is the board specific file, so it seems ok.
> 
I mean there are many espresso boards are having different exynos7 SoC. I mean
exynos7-espresso cannot represent all of espresso boards.

- Kukjin

[PATCH v2 5/7] arm64: dts: Add initial device tree support for EXYNOS7

[Kukjin Kim]

Arnd Bergmann wrote:
> 
Hi, Arnd

> On Thursday 04 September 2014 01:15:20 Kukjin Kim wrote:
> > Naveen Krishna Chatradhi wrote:
> >
> > > diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-
> > > espresso.dts
> > > new file mode 100644
> > > index 0000000..f6a8879
> > > --- /dev/null
> > > +++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
> > > @@ -0,0 +1,31 @@
> > > +/*
> > > + * SAMSUNG Exynos7 Espresso board device tree source
> > > + *
> > > + * Copyright (c) 2014 Samsung Electronics Co., Ltd.
> > > + *		http://www.samsung.com
> > > + *
> > > + * This program is free software; you can redistribute it and/or modify
> > > + * it under the terms of the GNU General Public License version 2 as
> > > + * published by the Free Software Foundation.
> > > +*/
> > > +
> > > +/dts-v1/;
> > > +#include "exynos7.dtsi"
> > > +
> > > +/ {
> > > +	model = "Samsung Exynos7 Espresso board based on EXYNOS7";
> > > +	compatible = "samsung,exynos7-espresso", "samsung,exynos7";
> > > +
> > > +	chosen {
> > > +		linux,stdout-path = &serial_2;
> >
> > Well...
> >
> > > +	};
> > > +
> > > +	memory at 40000000 {
> > > +		device_type = "memory";
> > > +		reg = <0x0 0x40000000 0x0 0xC0000000>;
> >
> > The base address of system memory is depending on each board, actually some of
> > them are 0x20000000.
> 
> This is the board specific file, so it seems ok.
> 
I mean there are many espresso boards are having different exynos7 SoC. I mean
exynos7-espresso cannot represent all of espresso boards.

- Kukjin

Re: [PATCH v2 5/7] arm64: dts: Add initial device tree support for EXYNOS7

[Arnd Bergmann]

On Thursday 04 September 2014 01:31:21 Kukjin Kim wrote:
> > This is the board specific file, so it seems ok.
> > 
> I mean there are many espresso boards are having different exynos7
> SoC. I mean exynos7-espresso cannot represent all of espresso boards.
> 

Ah, I see, that makes sense.

We definitely need a top-level .dts file for each board that is different
in a nondiscoverable way then.

If the mmc settings and possibly some other nodes (to be added later)
are common across them, those can be in a board specific .dtsi file.

For the memory node, I would actually expect that to be filled by
the boot loader, so we could leave it out entirely. The same applies
to the command line: the parts that are in there at the moment (
"console=ttySAC2,115200n8 root=/dev/ram0 ramdisk=16384 initrd=0x42000000,16M")
clearly don't belong into a generic dts file and none of them should be
set that way.

For the initial version, that would mean that the file comes down to having
as its only contents

/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include "exynos7123.dtsi"
#include "exynos7-espresso.dtsi" // for the mmc nodes

/ {
       model = "Samsung ESPRESSO board based on EXYNOS7123";
       compatible = "samsung,espresso", "samsung,exynos7123", "samsung,exynos7";
};

One more thing I just noticed is the GPL statement in the dts files.
Can we please change that to a permissive license in order to allow
including it in non-GPL boot loaders and operating systems?

Dual GPL+MIT or GPL+BSD would make most sense here.

	Arnd

[PATCH v2 5/7] arm64: dts: Add initial device tree support for EXYNOS7

[Arnd Bergmann]

On Thursday 04 September 2014 01:31:21 Kukjin Kim wrote:
> > This is the board specific file, so it seems ok.
> > 
> I mean there are many espresso boards are having different exynos7
> SoC. I mean exynos7-espresso cannot represent all of espresso boards.
> 

Ah, I see, that makes sense.

We definitely need a top-level .dts file for each board that is different
in a nondiscoverable way then.

If the mmc settings and possibly some other nodes (to be added later)
are common across them, those can be in a board specific .dtsi file.

For the memory node, I would actually expect that to be filled by
the boot loader, so we could leave it out entirely. The same applies
to the command line: the parts that are in there at the moment (
"console=ttySAC2,115200n8 root=/dev/ram0 ramdisk=16384 initrd=0x42000000,16M")
clearly don't belong into a generic dts file and none of them should be
set that way.

For the initial version, that would mean that the file comes down to having
as its only contents

/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include "exynos7123.dtsi"
#include "exynos7-espresso.dtsi" // for the mmc nodes

/ {
       model = "Samsung ESPRESSO board based on EXYNOS7123";
       compatible = "samsung,espresso", "samsung,exynos7123", "samsung,exynos7";
};

One more thing I just noticed is the GPL statement in the dts files.
Can we please change that to a permissive license in order to allow
including it in non-GPL boot loaders and operating systems?

Dual GPL+MIT or GPL+BSD would make most sense here.

	Arnd

RE: [PATCH v2 5/7] arm64: dts: Add initial device tree support for EXYNOS7

[kgene]

Arnd Bergmann wrote:
> 
> On Thursday 04 September 2014 01:31:21 Kukjin Kim wrote:
> > > This is the board specific file, so it seems ok.
> > >
> > I mean there are many espresso boards are having different exynos7
> > SoC. I mean exynos7-espresso cannot represent all of espresso boards.
> >
> 
> Ah, I see, that makes sense.
> 
> We definitely need a top-level .dts file for each board that is different
> in a nondiscoverable way then.
> 
Agreed.

And one more, at this moment just using exynos7 would be nice to us then if
required, we could add any specific properties later.

> If the mmc settings and possibly some other nodes (to be added later)
> are common across them, those can be in a board specific .dtsi file.
> 
Yes, right.

> For the memory node, I would actually expect that to be filled by
> the boot loader, so we could leave it out entirely. The same applies
> to the command line: the parts that are in there at the moment (
> "console=ttySAC2,115200n8 root=/dev/ram0 ramdisk=16384 initrd=0x42000000,16M")
> clearly don't belong into a generic dts file and none of them should be
> set that way.
> 
Hmm...yeah we need to use proper boot-loader but I think kernel needs having
default memory property if boot loader doesn't have anything?

> For the initial version, that would mean that the file comes down to having
> as its only contents
> 
> /dts-v1/;
> #include <dt-bindings/gpio/gpio.h>
> #include "exynos7123.dtsi"
> #include "exynos7-espresso.dtsi" // for the mmc nodes
> 
> / {
>        model = "Samsung ESPRESSO board based on EXYNOS7123";
>        compatible = "samsung,espresso", "samsung,exynos7123", "samsung,exynos7";
> };
> 
> One more thing I just noticed is the GPL statement in the dts files.
> Can we please change that to a permissive license in order to allow
> including it in non-GPL boot loaders and operating systems?
> 
> Dual GPL+MIT or GPL+BSD would make most sense here.
> 
I need to check about that with license guy in my team ;)

Naveen, I'll have a look at the patch again.

Thanks,
Kukjin

[PATCH v2 5/7] arm64: dts: Add initial device tree support for EXYNOS7

[kgene at kernel.org]

Arnd Bergmann wrote:
> 
> On Thursday 04 September 2014 01:31:21 Kukjin Kim wrote:
> > > This is the board specific file, so it seems ok.
> > >
> > I mean there are many espresso boards are having different exynos7
> > SoC. I mean exynos7-espresso cannot represent all of espresso boards.
> >
> 
> Ah, I see, that makes sense.
> 
> We definitely need a top-level .dts file for each board that is different
> in a nondiscoverable way then.
> 
Agreed.

And one more, at this moment just using exynos7 would be nice to us then if
required, we could add any specific properties later.

> If the mmc settings and possibly some other nodes (to be added later)
> are common across them, those can be in a board specific .dtsi file.
> 
Yes, right.

> For the memory node, I would actually expect that to be filled by
> the boot loader, so we could leave it out entirely. The same applies
> to the command line: the parts that are in there at the moment (
> "console=ttySAC2,115200n8 root=/dev/ram0 ramdisk=16384 initrd=0x42000000,16M")
> clearly don't belong into a generic dts file and none of them should be
> set that way.
> 
Hmm...yeah we need to use proper boot-loader but I think kernel needs having
default memory property if boot loader doesn't have anything?

> For the initial version, that would mean that the file comes down to having
> as its only contents
> 
> /dts-v1/;
> #include <dt-bindings/gpio/gpio.h>
> #include "exynos7123.dtsi"
> #include "exynos7-espresso.dtsi" // for the mmc nodes
> 
> / {
>        model = "Samsung ESPRESSO board based on EXYNOS7123";
>        compatible = "samsung,espresso", "samsung,exynos7123", "samsung,exynos7";
> };
> 
> One more thing I just noticed is the GPL statement in the dts files.
> Can we please change that to a permissive license in order to allow
> including it in non-GPL boot loaders and operating systems?
> 
> Dual GPL+MIT or GPL+BSD would make most sense here.
> 
I need to check about that with license guy in my team ;)

Naveen, I'll have a look at the patch again.

Thanks,
Kukjin

RE: [PATCH v2 5/7] arm64: dts: Add initial device tree support for EXYNOS7

[kgene]

Naveen Krishna Chatradhi wrote:
> 
> Add initial device tree nodes for EXYNOS7 SoC and board dts file
> to support Espresso board based on Exynos7 SoC.
> 
> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
> Cc: Rob Herring <robh@kernel.org>
> Cc: Catalin Marinas <catalin.marinas@arm.com>
> ---
>  arch/arm64/boot/dts/Makefile                    |    1 +
>  arch/arm64/boot/dts/exynos/exynos7-espresso.dts |   31 +++++
>  arch/arm64/boot/dts/exynos/exynos7.dtsi         |  168 +++++++++++++++++++++++
>  3 files changed, 200 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/exynos/exynos7-espresso.dts
>  create mode 100644 arch/arm64/boot/dts/exynos/exynos7.dtsi

[...]

> diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
> new file mode 100644
> index 0000000..e593af55
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
> @@ -0,0 +1,168 @@
> +/*
> + * SAMSUNG EXYNOS7 SoC device tree source
> + *
> + * Copyright (c) 2014 Samsung Electronics Co., Ltd.
> + *		http://www.samsung.com
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <dt-bindings/clock/exynos7-clk.h>
> +
> +/ {
> +	compatible = "samsung,exynos7";
> +	interrupt-parent = <&gic>;
> +	#address-cells = <2>;

+	#address-cells = <1>; ?

Hmm...I can't see any 64-bit address here.

> +	#size-cells = <2>;
> +

[...]

> +
> +	soc: soc {
> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0 0 0 0x18000000>;
> +
> +		chipid@10000000 {
> +			compatible = "samsung,exynos4210-chipid";
> +			reg = <0x10000000 0x100>;
> +		};

Maybe this is not required? There is no check chipid in arm/arm64.

[...]

> +		timer {
> +			compatible = "arm,armv8-timer";
> +			interrupts = <1 13 0xff01>,
> +				     <1 14 0xff01>,
> +				     <1 11 0xff01>,
> +				     <1 10 0xff01>;

clock-frequency ?

[...]

- Kukjin

[PATCH v2 5/7] arm64: dts: Add initial device tree support for EXYNOS7

[kgene at kernel.org]

Naveen Krishna Chatradhi wrote:
> 
> Add initial device tree nodes for EXYNOS7 SoC and board dts file
> to support Espresso board based on Exynos7 SoC.
> 
> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
> Cc: Rob Herring <robh@kernel.org>
> Cc: Catalin Marinas <catalin.marinas@arm.com>
> ---
>  arch/arm64/boot/dts/Makefile                    |    1 +
>  arch/arm64/boot/dts/exynos/exynos7-espresso.dts |   31 +++++
>  arch/arm64/boot/dts/exynos/exynos7.dtsi         |  168 +++++++++++++++++++++++
>  3 files changed, 200 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/exynos/exynos7-espresso.dts
>  create mode 100644 arch/arm64/boot/dts/exynos/exynos7.dtsi

[...]

> diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
> new file mode 100644
> index 0000000..e593af55
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
> @@ -0,0 +1,168 @@
> +/*
> + * SAMSUNG EXYNOS7 SoC device tree source
> + *
> + * Copyright (c) 2014 Samsung Electronics Co., Ltd.
> + *		http://www.samsung.com
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <dt-bindings/clock/exynos7-clk.h>
> +
> +/ {
> +	compatible = "samsung,exynos7";
> +	interrupt-parent = <&gic>;
> +	#address-cells = <2>;

+	#address-cells = <1>; ?

Hmm...I can't see any 64-bit address here.

> +	#size-cells = <2>;
> +

[...]

> +
> +	soc: soc {
> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0 0 0 0x18000000>;
> +
> +		chipid at 10000000 {
> +			compatible = "samsung,exynos4210-chipid";
> +			reg = <0x10000000 0x100>;
> +		};

Maybe this is not required? There is no check chipid in arm/arm64.

[...]

> +		timer {
> +			compatible = "arm,armv8-timer";
> +			interrupts = <1 13 0xff01>,
> +				     <1 14 0xff01>,
> +				     <1 11 0xff01>,
> +				     <1 10 0xff01>;

clock-frequency ?

[...]

- Kukjin

Re: [PATCH v2 5/7] arm64: dts: Add initial device tree support for EXYNOS7

[Naveen Krishna Ch]

On 9 September 2014 08:58,  <kgene@kernel.org> wrote:
> Naveen Krishna Chatradhi wrote:
>>
>> Add initial device tree nodes for EXYNOS7 SoC and board dts file
>> to support Espresso board based on Exynos7 SoC.
>>
>> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
>> Cc: Rob Herring <robh@kernel.org>
>> Cc: Catalin Marinas <catalin.marinas@arm.com>
>> ---
>>  arch/arm64/boot/dts/Makefile                    |    1 +
>>  arch/arm64/boot/dts/exynos/exynos7-espresso.dts |   31 +++++
>>  arch/arm64/boot/dts/exynos/exynos7.dtsi         |  168 +++++++++++++++++++++++
>>  3 files changed, 200 insertions(+)
>>  create mode 100644 arch/arm64/boot/dts/exynos/exynos7-espresso.dts
>>  create mode 100644 arch/arm64/boot/dts/exynos/exynos7.dtsi
>
> [...]
>
>> diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
>> new file mode 100644
>> index 0000000..e593af55
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
>> @@ -0,0 +1,168 @@
>> +/*
>> + * SAMSUNG EXYNOS7 SoC device tree source
>> + *
>> + * Copyright (c) 2014 Samsung Electronics Co., Ltd.
>> + *           http://www.samsung.com
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
>> +#include <dt-bindings/clock/exynos7-clk.h>
>> +
>> +/ {
>> +     compatible = "samsung,exynos7";
>> +     interrupt-parent = <&gic>;
>> +     #address-cells = <2>;
>
> +       #address-cells = <1>; ?
>
> Hmm...I can't see any 64-bit address here.

All the SoC peripherals have been put into the soc node and ranges
property in that node is used to convert 64-bit to 32-bit addresses.
But since this is a 64-bit SoC, we use #address-cells as 2.

>
>> +     #size-cells = <2>;
>> +
>
> [...]
>
>> +
>> +     soc: soc {
>> +             compatible = "simple-bus";
>> +             #address-cells = <1>;
>> +             #size-cells = <1>;
>> +             ranges = <0 0 0 0x18000000>;
>> +
>> +             chipid@10000000 {
>> +                     compatible = "samsung,exynos4210-chipid";
>> +                     reg = <0x10000000 0x100>;
>> +             };
>
> Maybe this is not required? There is no check chipid in arm/arm64.

This is only describing the hardware and it does not depend on linux
using this information. And support for chip id can be used later for
64-bit Exynos platforms as well.

>
> [...]
>
>> +             timer {
>> +                     compatible = "arm,armv8-timer";
>> +                     interrupts = <1 13 0xff01>,
>> +                                  <1 14 0xff01>,
>> +                                  <1 11 0xff01>,
>> +                                  <1 10 0xff01>;
>
> clock-frequency ?

That is programmed by the bootloader / firmware.

>
> [...]
>
> - Kukjin
>

Thanks,
-- 
Shine bright,
(: Nav :)

[PATCH v2 5/7] arm64: dts: Add initial device tree support for EXYNOS7

[Naveen Krishna Ch]

On 9 September 2014 08:58,  <kgene@kernel.org> wrote:
> Naveen Krishna Chatradhi wrote:
>>
>> Add initial device tree nodes for EXYNOS7 SoC and board dts file
>> to support Espresso board based on Exynos7 SoC.
>>
>> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
>> Cc: Rob Herring <robh@kernel.org>
>> Cc: Catalin Marinas <catalin.marinas@arm.com>
>> ---
>>  arch/arm64/boot/dts/Makefile                    |    1 +
>>  arch/arm64/boot/dts/exynos/exynos7-espresso.dts |   31 +++++
>>  arch/arm64/boot/dts/exynos/exynos7.dtsi         |  168 +++++++++++++++++++++++
>>  3 files changed, 200 insertions(+)
>>  create mode 100644 arch/arm64/boot/dts/exynos/exynos7-espresso.dts
>>  create mode 100644 arch/arm64/boot/dts/exynos/exynos7.dtsi
>
> [...]
>
>> diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
>> new file mode 100644
>> index 0000000..e593af55
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
>> @@ -0,0 +1,168 @@
>> +/*
>> + * SAMSUNG EXYNOS7 SoC device tree source
>> + *
>> + * Copyright (c) 2014 Samsung Electronics Co., Ltd.
>> + *           http://www.samsung.com
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
>> +#include <dt-bindings/clock/exynos7-clk.h>
>> +
>> +/ {
>> +     compatible = "samsung,exynos7";
>> +     interrupt-parent = <&gic>;
>> +     #address-cells = <2>;
>
> +       #address-cells = <1>; ?
>
> Hmm...I can't see any 64-bit address here.

All the SoC peripherals have been put into the soc node and ranges
property in that node is used to convert 64-bit to 32-bit addresses.
But since this is a 64-bit SoC, we use #address-cells as 2.

>
>> +     #size-cells = <2>;
>> +
>
> [...]
>
>> +
>> +     soc: soc {
>> +             compatible = "simple-bus";
>> +             #address-cells = <1>;
>> +             #size-cells = <1>;
>> +             ranges = <0 0 0 0x18000000>;
>> +
>> +             chipid at 10000000 {
>> +                     compatible = "samsung,exynos4210-chipid";
>> +                     reg = <0x10000000 0x100>;
>> +             };
>
> Maybe this is not required? There is no check chipid in arm/arm64.

This is only describing the hardware and it does not depend on linux
using this information. And support for chip id can be used later for
64-bit Exynos platforms as well.

>
> [...]
>
>> +             timer {
>> +                     compatible = "arm,armv8-timer";
>> +                     interrupts = <1 13 0xff01>,
>> +                                  <1 14 0xff01>,
>> +                                  <1 11 0xff01>,
>> +                                  <1 10 0xff01>;
>
> clock-frequency ?

That is programmed by the bootloader / firmware.

>
> [...]
>
> - Kukjin
>

Thanks,
-- 
Shine bright,
(: Nav :)