From mboxrd@z Thu Jan 1 00:00:00 1970 From: Archit Taneja Subject: [PATCH v2 3/3] dt/bindings: dmaengine: qcom_bam_dma: Add compatible string for BAM v1.3.0 Date: Mon, 29 Sep 2014 10:03:09 +0530 Message-ID: <1411965189-24499-3-git-send-email-architt@codeaurora.org> References: <1411037575-13153-1-git-send-email-architt@codeaurora.org> <1411965189-24499-1-git-send-email-architt@codeaurora.org> Return-path: In-Reply-To: <1411965189-24499-1-git-send-email-architt@codeaurora.org> Sender: linux-kernel-owner@vger.kernel.org To: vinod.koul@intel.com, agross@codeaurora.org Cc: galak@codeaurora.org, linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, dmaengine@vger.kernel.org, devicetree@vger.kernel.org, Archit Taneja List-Id: linux-arm-msm@vger.kernel.org Add compatible string for BAM v1.3.0 in the DT bindings documentation. Mentioned a few more SoCs which have BAM v1.4.0 in them. Reviewed-by: Kumar Gala Reviewed-by: Andy Gross Signed-off-by: Archit Taneja --- Update in v2: Added IPQ8064 to the v1.3.0 list Documentation/devicetree/bindings/dma/qcom_bam_dma.txt | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt b/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt index d75a9d7..f8c3311 100644 --- a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt +++ b/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt @@ -1,7 +1,9 @@ QCOM BAM DMA controller Required properties: -- compatible: must contain "qcom,bam-v1.4.0" for MSM8974 +- compatible: must be one of the following: + * "qcom,bam-v1.4.0" for MSM8974, APQ8074 and APQ8084 + * "qcom,bam-v1.3.0" for APQ8064, IPQ8064 and MSM8960 - reg: Address range for DMA registers - interrupts: Should contain the one interrupt shared by all channels - #dma-cells: must be <1>, the cell in the dmas property of the client device -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, hosted by The Linux Foundation