All of lore.kernel.org
 help / color / mirror / Atom feed
From: Chun-Hao Lin <hau@realtek.com>
To: <netdev@vger.kernel.org>
Cc: <nic_swsd@realtek.com>, <linux-kernel@vger.kernel.org>,
	Chun-Hao Lin <hau@realtek.com>
Subject: [PATCH v2 net-next 01/10] r8169:change uppercase number to lowercase nubmer
Date: Wed, 1 Oct 2014 23:17:12 +0800	[thread overview]
Message-ID: <1412176641-24393-1-git-send-email-hau@realtek.com> (raw)

Signed-off-by: Chun-Hao Lin <hau@realtek.com>
---
 drivers/net/ethernet/realtek/r8169.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index 1d81238..000bd6c 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -3692,8 +3692,8 @@ static void rtl8168h_2_hw_phy_config(struct rtl8169_private *tp)
 	ioffset_p0 |= (data & (0x07));
 	data = (ioffset_p3<<12)|(ioffset_p2<<8)|(ioffset_p1<<4)|(ioffset_p0);
 
-	if ((ioffset_p3 != 0x0F) || (ioffset_p2 != 0x0F) ||
-	    (ioffset_p1 != 0x0F) || (ioffset_p0 == 0x0F)) {
+	if ((ioffset_p3 != 0x0f) || (ioffset_p2 != 0x0f) ||
+	    (ioffset_p1 != 0x0f) || (ioffset_p0 == 0x0f)) {
 		rtl_writephy(tp, 0x1f, 0x0bcf);
 		rtl_writephy(tp, 0x16, data);
 		rtl_writephy(tp, 0x1f, 0x0000);
@@ -4265,7 +4265,7 @@ static void r810x_pll_power_up(struct rtl8169_private *tp)
 		break;
 	case RTL_GIGA_MAC_VER_47:
 	case RTL_GIGA_MAC_VER_48:
-		RTL_W8(PMCH, RTL_R8(PMCH) | 0xC0);
+		RTL_W8(PMCH, RTL_R8(PMCH) | 0xc0);
 		break;
 	default:
 		RTL_W8(PMCH, RTL_R8(PMCH) | 0x80);
@@ -4395,7 +4395,7 @@ static void r8168_pll_power_up(struct rtl8169_private *tp)
 		break;
 	case RTL_GIGA_MAC_VER_45:
 	case RTL_GIGA_MAC_VER_46:
-		RTL_W8(PMCH, RTL_R8(PMCH) | 0xC0);
+		RTL_W8(PMCH, RTL_R8(PMCH) | 0xc0);
 		break;
 	case RTL_GIGA_MAC_VER_40:
 	case RTL_GIGA_MAC_VER_41:
@@ -4975,7 +4975,7 @@ static void rtl_hw_start_8169(struct net_device *dev)
 
 	if (tp->mac_version == RTL_GIGA_MAC_VER_02 ||
 	    tp->mac_version == RTL_GIGA_MAC_VER_03) {
-		dprintk("Set MAC Reg C+CR Offset 0xE0. "
+		dprintk("Set MAC Reg C+CR Offset 0xe0. "
 			"Bit-3 and bit-14 MUST be 1\n");
 		tp->cp_cmd |= (1 << 14);
 	}
@@ -5010,7 +5010,7 @@ static void rtl_hw_start_8169(struct net_device *dev)
 	rtl_set_rx_mode(dev);
 
 	/* no early-rx interrupts */
-	RTL_W16(MultiIntr, RTL_R16(MultiIntr) & 0xF000);
+	RTL_W16(MultiIntr, RTL_R16(MultiIntr) & 0xf000);
 }
 
 static void rtl_csi_write(struct rtl8169_private *tp, int addr, int value)
@@ -5858,7 +5858,7 @@ static void rtl_hw_start_8168(struct net_device *dev)
 
 	rtl_set_rx_mode(dev);
 
-	RTL_W16(MultiIntr, RTL_R16(MultiIntr) & 0xF000);
+	RTL_W16(MultiIntr, RTL_R16(MultiIntr) & 0xf000);
 }
 
 #define R810X_CPCMD_QUIRK_MASK (\
@@ -7706,8 +7706,8 @@ static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	    tp->mac_version == RTL_GIGA_MAC_VER_48) {
 		u16 mac_addr[3];
 
-		*(u32 *)&mac_addr[0] = rtl_eri_read(tp, 0xE0, ERIAR_EXGMAC);
-		*(u16 *)&mac_addr[2] = rtl_eri_read(tp, 0xE4, ERIAR_EXGMAC);
+		*(u32 *)&mac_addr[0] = rtl_eri_read(tp, 0xe0, ERIAR_EXGMAC);
+		*(u16 *)&mac_addr[2] = rtl_eri_read(tp, 0xe4, ERIAR_EXGMAC);
 
 		if (is_valid_ether_addr((u8 *)mac_addr))
 			rtl_rar_set(tp, (u8 *)mac_addr);
-- 
1.8.3.2


             reply	other threads:[~2014-10-01 15:17 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-10-01 15:17 Chun-Hao Lin [this message]
2014-10-01 15:17 ` [PATCH v2 net-next 02/10] r8169:add disable/enable RTL8168G pll function Chun-Hao Lin
2014-10-01 15:17 ` [PATCH v2 net-next 03/10] r8169:add disable/enable RTL8411B " Chun-Hao Lin
2014-10-01 15:17 ` [PATCH v2 net-next 04/10] r8169:add support more chips to get mac address from backup mac address register Chun-Hao Lin
2014-10-01 15:17 ` [PATCH v2 net-next 05/10] r8169:add more chips to support magic packet v2 Chun-Hao Lin
2014-10-01 15:17 ` [PATCH v2 net-next 06/10] r8169:for function "rtl_w1w0_phy" change its name and behavior Chun-Hao Lin
2014-10-01 15:17 ` [PATCH v2 net-next 07/10] r8169:change the name of function"rtl_w1w0_eri" Chun-Hao Lin
2014-10-01 15:17 ` [PATCH v2 net-next 08/10] r8169:change the name of function "r8168dp_check_dash" to "r8168_check_dash" Chun-Hao Lin
2014-10-01 15:17 ` [PATCH v2 net-next 09/10] r8169:modify the behavior of function "rtl8168_oob_notify" Chun-Hao Lin
2014-10-01 15:17 ` [PATCH v2 net-next 10/10] r8169:call "rtl8168_driver_start" "rtl8168_driver_stop" only when hardware dash function is enabled Chun-Hao Lin
2014-10-01 17:17 ` [PATCH v2 net-next 01/10] r8169:change uppercase number to lowercase nubmer Sergei Shtylyov
2014-10-01 19:34 ` David Miller
2014-10-02  5:35   ` [PATCH v2 net-next 01/10] r8169:change uppercase numbertolowercase nubmer Hau

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1412176641-24393-1-git-send-email-hau@realtek.com \
    --to=hau@realtek.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=nic_swsd@realtek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.