From mboxrd@z Thu Jan 1 00:00:00 1970 From: Simon Glass Date: Wed, 1 Oct 2014 19:57:28 -0600 Subject: [U-Boot] [PATCH v4 9/9] dm: imx: Move cm_fx6 to use driver model for serial and GPIO In-Reply-To: <1412215048-565-1-git-send-email-sjg@chromium.org> References: <1412215048-565-1-git-send-email-sjg@chromium.org> Message-ID: <1412215048-565-10-git-send-email-sjg@chromium.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Now that serial and GPIO are available for iMX.6, move cm_fx6 over as an example. Acked-by: Igor Grinberg Signed-off-by: Simon Glass --- Changes in v4: None Changes in v3: None Changes in v2: - Use the correct namespace for the platform data board/compulab/cm_fx6/cm_fx6.c | 10 ++++++++++ include/configs/cm_fx6.h | 11 +++++++++++ 2 files changed, 21 insertions(+) diff --git a/board/compulab/cm_fx6/cm_fx6.c b/board/compulab/cm_fx6/cm_fx6.c index 53681d4..dd5698f 100644 --- a/board/compulab/cm_fx6/cm_fx6.c +++ b/board/compulab/cm_fx6/cm_fx6.c @@ -9,11 +9,13 @@ */ #include +#include #include #include #include #include #include +#include #include #include #include @@ -542,3 +544,11 @@ u32 get_board_rev(void) return cl_eeprom_get_board_rev(); } +static struct mxc_serial_platdata cm_fx6_mxc_serial_plat = { + .reg = (struct mxc_uart *)UART4_BASE, +}; + +U_BOOT_DEVICE(cm_fx6_serial) = { + .name = "serial_mxc", + .platdata = &cm_fx6_mxc_serial_plat, +}; diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h index 10d02b4..1f55150 100644 --- a/include/configs/cm_fx6.h +++ b/include/configs/cm_fx6.h @@ -21,6 +21,17 @@ #define CONFIG_MACH_TYPE 4273 #define CONFIG_SYS_HZ 1000 +#ifndef CONFIG_SPL_BUILD +#define CONFIG_DM +#define CONFIG_CMD_DM + +#define CONFIG_DM_GPIO +#define CONFIG_CMD_GPIO + +#define CONFIG_DM_SERIAL +#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) +#endif + /* Display information on boot */ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO -- 2.1.0.rc2.206.gedb03e5