All of lore.kernel.org
 help / color / mirror / Atom feed
From: matt@masarand.com
To: bhelgaas@google.com
Cc: linux-pci@vger.kernel.org, Matthew Minter <matt@masarand.com>
Subject: [PATCH 12/18] Delayed mn10300 setup of PCI IRQs to bus scan time
Date: Thu,  2 Oct 2014 05:07:40 +0100	[thread overview]
Message-ID: <1412222866-21068-13-git-send-email-matt@masarand.com> (raw)
In-Reply-To: <1412222866-21068-1-git-send-email-matt@masarand.com>

From: Matthew Minter <matt@masarand.com>


PCI IRQs are being asigned during pcibios_irq_init currently, this causes
a problem by which hot-plug devices connected after boot will not recieve
an IRQ, this patch-set fixes this by registering the IRQ assignment
functions at boot, to then be called later by the device enable code.

Signed-off-by: Matthew Minter <matt@masarand.com>

---
 arch/mn10300/unit-asb2305/pci-asb2305.h |  5 +----
 arch/mn10300/unit-asb2305/pci-irq.c     | 25 +++++--------------------
 arch/mn10300/unit-asb2305/pci.c         | 21 ++++++++-------------
 3 files changed, 14 insertions(+), 37 deletions(-)

diff --git a/arch/mn10300/unit-asb2305/pci-asb2305.h b/arch/mn10300/unit-asb2305/pci-asb2305.h
index 9e17aca..fb520cf 100644
--- a/arch/mn10300/unit-asb2305/pci-asb2305.h
+++ b/arch/mn10300/unit-asb2305/pci-asb2305.h
@@ -67,9 +67,6 @@ struct irq_routing_table {
 } __attribute__((packed));
 
 extern unsigned int pcibios_irq_mask;
-
-extern void pcibios_irq_init(void);
-extern void pcibios_fixup_irqs(void);
-extern void pcibios_enable_irq(struct pci_dev *dev);
+extern int pci_map_irq(struct pci_dev *, u8 slot, u8 pin);
 
 #endif /* PCI_ASB2305_H */
diff --git a/arch/mn10300/unit-asb2305/pci-irq.c b/arch/mn10300/unit-asb2305/pci-irq.c
index fcb28ce..5be6fea 100644
--- a/arch/mn10300/unit-asb2305/pci-irq.c
+++ b/arch/mn10300/unit-asb2305/pci-irq.c
@@ -20,27 +20,12 @@
 #include <asm/smp.h>
 #include "pci-asb2305.h"
 
-void __init pcibios_irq_init(void)
+int pci_map_irq(struct pci_dev *, u8 slot, u8 pin)
 {
-}
-
-void __init pcibios_fixup_irqs(void)
-{
-	struct pci_dev *dev = NULL;
-	u8 line, pin;
+	u8 line;
 
-	for_each_pci_dev(dev) {
-		pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
-		if (pin) {
-			dev->irq = XIRQ1;
-			pci_write_config_byte(dev, PCI_INTERRUPT_LINE,
-					      dev->irq);
-		}
-		pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &line);
-	}
-}
-
-void pcibios_enable_irq(struct pci_dev *dev)
-{
+	pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
+	dev->irq = XIRQ1;
 	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+	pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &line);
 }
diff --git a/arch/mn10300/unit-asb2305/pci.c b/arch/mn10300/unit-asb2305/pci.c
index 6b4339f..22f8786 100644
--- a/arch/mn10300/unit-asb2305/pci.c
+++ b/arch/mn10300/unit-asb2305/pci.c
@@ -377,13 +377,18 @@ static int __init pcibios_init(void)
 	pci_add_resource_offset(&resources, &pci_ioport_resource, io_offset);
 	pci_add_resource_offset(&resources, &pci_iomem_resource, mem_offset);
 	pci_scan_root_bus(NULL, 0, &pci_direct_ampci, NULL, &resources);
-
-	pcibios_irq_init();
-	pcibios_fixup_irqs();
 	pcibios_resource_survey();
 	return 0;
 }
 
+int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
+{
+	bridge->swizzle_irq = NULL;
+	bridge->map_irq = pci_map_irq;
+	return 0;
+}
+
+
 arch_initcall(pcibios_init);
 
 char *__init pcibios_setup(char *str)
@@ -396,16 +401,6 @@ char *__init pcibios_setup(char *str)
 	return str;
 }
 
-int pcibios_enable_device(struct pci_dev *dev, int mask)
-{
-	int err;
-
-	err = pci_enable_resources(dev, mask);
-	if (err == 0)
-		pcibios_enable_irq(dev);
-	return err;
-}
-
 /*
  * disable the ethernet chipset
  */
-- 
2.1.0


  parent reply	other threads:[~2014-10-02  4:08 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-10-02  4:07 [PATCH V3] Delay allocation of PCI device IRQs from boot time until bus scan time to fix PCI hotplugging matt
2014-10-02  4:07 ` [PATCH 01/18] Added way to register deferred PCI IRQ assignment handlers matt
2014-10-02 10:33   ` Liviu Dudau
2014-10-14 23:25     ` Bjorn Helgaas
2014-10-14 17:15   ` Bjorn Helgaas
2014-10-02  4:07 ` [PATCH 02/18] Delayed x86 setup of PCI IRQs to bus scan time matt
2014-10-02 10:51   ` Liviu Dudau
2014-10-14 18:11   ` Bjorn Helgaas
2014-10-02  4:07 ` [PATCH 03/18] Delayed arm " matt
2014-10-14 18:14   ` Bjorn Helgaas
2014-10-02  4:07 ` [PATCH 04/18] Delayed powerpc " matt
2014-10-14 18:20   ` Bjorn Helgaas
2014-10-02  4:07 ` [PATCH 05/18] Delayed sh " matt
2014-10-14 18:25   ` Bjorn Helgaas
2014-10-02  4:07 ` [PATCH 06/18] Delayed alpha " matt
2014-10-14 18:27   ` Bjorn Helgaas
2014-10-02  4:07 ` [PATCH 07/18] Delayed cris " matt
2014-10-14 18:34   ` Bjorn Helgaas
2014-10-02  4:07 ` [PATCH 08/18] Delayed frv " matt
2014-10-14 18:37   ` Bjorn Helgaas
2014-10-02  4:07 ` [PATCH 09/18] Delayed m68k " matt
2014-10-14 18:38   ` Bjorn Helgaas
2014-10-02  4:07 ` [PATCH 10/18] Delayed microblaze " matt
2014-10-02  4:07 ` [PATCH 11/18] Delayed mips " matt
2014-10-02  4:07 ` matt [this message]
2014-10-14 18:46   ` [PATCH 12/18] Delayed mn10300 " Bjorn Helgaas
2014-10-02  4:07 ` [PATCH 13/18] Delayed sparc " matt
2014-10-14 18:51   ` Bjorn Helgaas
2014-10-02  4:07 ` [PATCH 14/18] Delayed tile " matt
2014-10-02  4:07 ` [PATCH 15/18] Delayed unicore32 " matt
2014-10-02  4:07 ` [PATCH 16/18] Disabled bus scan time PCI IRQ assignment on ia64 matt
2014-10-14 18:53   ` Bjorn Helgaas
2014-10-02  4:07 ` [PATCH 17/18] Disabled bus scan time PCI IRQ assignment on parisc matt
2014-10-02  4:07 ` [PATCH 18/18] Disabled bus scan time PCI IRQ assignment on s390 matt
2015-01-31 14:56 ` [PATCH V3] Delay allocation of PCI device IRQs from boot time until bus scan time to fix PCI hotplugging Bjorn Helgaas
  -- strict thread matches above, loose matches on Subject: below --
2014-10-02  3:50 matt
2014-10-02  3:50 ` [PATCH 12/18] Delayed mn10300 setup of PCI IRQs to bus scan time matt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1412222866-21068-13-git-send-email-matt@masarand.com \
    --to=matt@masarand.com \
    --cc=bhelgaas@google.com \
    --cc=linux-pci@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.