From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marek Vasut Date: Sat, 11 Oct 2014 18:42:49 +0200 Subject: [U-Boot] [PATCH 01/10] video: Add S3C24xx framebuffer support Message-ID: <1413045778-5690-1-git-send-email-marex@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Add basic framebuffer driver for the S3C24xx family of CPUs. Signed-off-by: Marek Vasut Cc: Anatolij Gustschin Cc: Kyungmin Park Cc: Lukasz Majewski Cc: Minkyu Kang Cc: Vladimir Zapolskiy V2: Keep the Makefile sorted. --- drivers/video/Makefile | 1 + drivers/video/cfb_console.c | 2 +- drivers/video/s3c-fb.c | 172 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 174 insertions(+), 1 deletion(-) create mode 100644 drivers/video/s3c-fb.c diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 14a6781..0e407d0 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -35,6 +35,7 @@ obj-$(CONFIG_VIDEO_MX3) += mx3fb.o videomodes.o obj-$(CONFIG_VIDEO_IPUV3) += mxc_ipuv3_fb.o ipu_common.o ipu_disp.o obj-$(CONFIG_VIDEO_MXS) += mxsfb.o videomodes.o obj-$(CONFIG_VIDEO_OMAP3) += omap3_dss.o +obj-$(CONFIG_VIDEO_S3C) += s3c-fb.o videomodes.o obj-$(CONFIG_VIDEO_SANDBOX_SDL) += sandbox_sdl.o obj-$(CONFIG_VIDEO_SED13806) += sed13806.o obj-$(CONFIG_VIDEO_SM501) += sm501.o diff --git a/drivers/video/cfb_console.c b/drivers/video/cfb_console.c index 9231927..98d10e3 100644 --- a/drivers/video/cfb_console.c +++ b/drivers/video/cfb_console.c @@ -135,7 +135,7 @@ #endif #endif -#ifdef CONFIG_VIDEO_MXS +#if defined(CONFIG_VIDEO_MXS) || defined(CONFIG_VIDEO_S3C) #define VIDEO_FB_16BPP_WORD_SWAP #endif diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c new file mode 100644 index 0000000..521eb75 --- /dev/null +++ b/drivers/video/s3c-fb.c @@ -0,0 +1,172 @@ +/* + * S3C24x0 LCD driver + * + * NOTE: Only 16/24 bpp operation with TFT LCD is supported. + * + * Copyright (C) 2014 Marek Vasut + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include +#include +#include + +#include +#include +#include + +#include "videomodes.h" + +static GraphicDevice panel; + +/* S3C requires the FB to be 4MiB aligned. */ +#define S3CFB_ALIGN (4 << 20) + +#define S3CFB_LCDCON1_CLKVAL(x) ((x) << 8) +#define S3CFB_LCDCON1_PNRMODE_TFT (0x3 << 5) +#define S3CFB_LCDCON1_BPPMODE_TFT_16BPP (0xc << 1) +#define S3CFB_LCDCON1_BPPMODE_TFT_24BPP (0xd << 1) + +#define S3CFB_LCDCON2_VBPD(x) ((x) << 24) +#define S3CFB_LCDCON2_LINEVAL(x) ((x) << 14) +#define S3CFB_LCDCON2_VFPD(x) ((x) << 6) +#define S3CFB_LCDCON2_VSPW(x) ((x) << 0) + +#define S3CFB_LCDCON3_HBPD(x) ((x) << 19) +#define S3CFB_LCDCON3_HOZVAL(x) ((x) << 8) +#define S3CFB_LCDCON3_HFPD(x) ((x) << 0) + +#define S3CFB_LCDCON4_HSPW(x) ((x) << 0) + +#define S3CFB_LCDCON5_BPP24BL (1 << 12) +#define S3CFB_LCDCON5_FRM565 (1 << 11) +#define S3CFB_LCDCON5_HWSWP (1 << 0) + +#define PS2KHZ(ps) (1000000000UL / (ps)) + +/* + * Example: + * setenv videomode video=ctfb:x:800,y:480,depth:16,mode:0,\ + * pclk:30066,le:41,ri:89,up:45,lo:12, + * hs:1,vs:1,sync:100663296,vmode:0 + */ +static void s3c_lcd_init(GraphicDevice *panel, + struct ctfb_res_modes *mode, int bpp) +{ + uint32_t clk_divider; + struct s3c24x0_lcd *regs = s3c24x0_get_base_lcd(); + + /* Stop the controller. */ + clrbits_le32(®s->lcdcon1, 1); + + /* Calculate clock divider. */ + clk_divider = (get_HCLK() / PS2KHZ(mode->pixclock)) / 1000; + clk_divider = DIV_ROUND_UP(clk_divider, 2); + if (clk_divider) + clk_divider -= 1; + + /* Program LCD configuration. */ + switch (bpp) { + case 16: + writel(S3CFB_LCDCON1_BPPMODE_TFT_16BPP | + S3CFB_LCDCON1_PNRMODE_TFT | + S3CFB_LCDCON1_CLKVAL(clk_divider), + ®s->lcdcon1); + writel(S3CFB_LCDCON5_HWSWP | S3CFB_LCDCON5_FRM565, + ®s->lcdcon5); + break; + case 24: + writel(S3CFB_LCDCON1_BPPMODE_TFT_24BPP | + S3CFB_LCDCON1_PNRMODE_TFT | + S3CFB_LCDCON1_CLKVAL(clk_divider), + ®s->lcdcon1); + writel(S3CFB_LCDCON5_BPP24BL, ®s->lcdcon5); + break; + } + + writel(S3CFB_LCDCON2_LINEVAL(mode->yres - 1) | + S3CFB_LCDCON2_VBPD(mode->upper_margin - 1) | + S3CFB_LCDCON2_VFPD(mode->lower_margin - 1) | + S3CFB_LCDCON2_VSPW(mode->vsync_len - 1), + ®s->lcdcon2); + + writel(S3CFB_LCDCON3_HBPD(mode->right_margin - 1) | + S3CFB_LCDCON3_HFPD(mode->left_margin - 1) | + S3CFB_LCDCON3_HOZVAL(mode->xres - 1), + ®s->lcdcon3); + + writel(S3CFB_LCDCON4_HSPW(mode->hsync_len - 1), + ®s->lcdcon4); + + /* Write FB address. */ + writel(panel->frameAdrs >> 1, ®s->lcdsaddr1); + writel((panel->frameAdrs + + (mode->xres * mode->yres * panel->gdfBytesPP)) >> 1, + ®s->lcdsaddr2); + writel(mode->xres * bpp / 16, ®s->lcdsaddr3); + + /* Start the controller. */ + setbits_le32(®s->lcdcon1, 1); +} + +void *video_hw_init(void) +{ + int bpp = -1; + char *penv; + void *fb; + struct ctfb_res_modes mode; + + puts("Video: "); + + /* Suck display configuration from "videomode" variable */ + penv = getenv("videomode"); + if (!penv) { + puts("S3CFB: 'videomode' variable not set!\n"); + return NULL; + } + + bpp = video_get_params(&mode, penv); + + /* fill in Graphic device struct */ + sprintf(panel.modeIdent, "%dx%dx%d", mode.xres, mode.yres, bpp); + + panel.winSizeX = mode.xres; + panel.winSizeY = mode.yres; + panel.plnSizeX = mode.xres; + panel.plnSizeY = mode.yres; + + switch (bpp) { + case 24: + panel.gdfBytesPP = 4; + panel.gdfIndex = GDF_32BIT_X888RGB; + break; + case 16: + panel.gdfBytesPP = 2; + panel.gdfIndex = GDF_16BIT_565RGB; + break; + default: + printf("S3CFB: Invalid BPP specified! (bpp = %i)\n", bpp); + return NULL; + } + + panel.memSize = mode.xres * mode.yres * panel.gdfBytesPP; + + /* Allocate framebuffer */ + fb = memalign(S3CFB_ALIGN, roundup(panel.memSize, S3CFB_ALIGN)); + if (!fb) { + printf("S3CFB: Error allocating framebuffer!\n"); + return NULL; + } + + /* Wipe framebuffer */ + memset(fb, 0, panel.memSize); + + panel.frameAdrs = (u32)fb; + + printf("%s\n", panel.modeIdent); + + /* Start framebuffer */ + s3c_lcd_init(&panel, &mode, bpp); + + return (void *)&panel; +} -- 2.1.1