From mboxrd@z Thu Jan 1 00:00:00 1970 From: Laurent Pinchart Date: Sun, 26 Oct 2014 14:11:10 +0000 Subject: [PATCH v5 05/14] ARM: shmobile: marzen: Enable DU device in DT Message-Id: <1414332679-15497-6-git-send-email-laurent.pinchart+renesas@ideasonboard.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-sh@vger.kernel.org Specify the DU output topology, enable the DU device and configure the related pins. Signed-off-by: Laurent Pinchart --- Changes since v4: - Renamed lvds-enc node to lvds-encoder - Added reg properties to port nodes of the lvds encoder --- arch/arm/boot/dts/r8a7779-marzen.dts | 83 ++++++++++++++++++++++++++++++++++++ 1 file changed, 83 insertions(+) diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts index 9e1b859190ca..034dada2b462 100644 --- a/arch/arm/boot/dts/r8a7779-marzen.dts +++ b/arch/arm/boot/dts/r8a7779-marzen.dts @@ -69,6 +69,78 @@ gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>; }; }; + + vga-encoder { + compatible = "adi,adv7123"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + vga_enc_in: endpoint { + remote-endpoint = <&du_out_rgb0>; + }; + }; + port@1 { + reg = <1>; + vga_enc_out: endpoint { + remote-endpoint = <&vga_in>; + }; + }; + }; + }; + + vga { + compatible = "vga-connector"; + + port { + vga_in: endpoint { + remote-endpoint = <&vga_enc_out>; + }; + }; + }; + + lvds-encoder { + compatible = "thine,thc63lvdm83d"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + port@0 { + reg = <0>; + lvds_enc_in: endpoint { + remote-endpoint = <&du_out_rgb1>; + }; + }; + port@1 { + reg = <1>; + lvds_connector: endpoint { + }; + }; + }; + }; +}; + +&du { + pinctrl-0 = <&du_pins>; + pinctrl-names = "default"; + status = "okay"; + + ports { + port@0 { + endpoint { + remote-endpoint = <&vga_enc_in>; + }; + }; + port@1 { + endpoint { + remote-endpoint = <&lvds_enc_in>; + }; + }; + }; }; &irqpin0 { @@ -84,6 +156,17 @@ }; &pfc { + du_pins: du { + du0 { + renesas,groups = "du0_rgb888", "du0_sync_1", "du0_clk_out_0"; + renesas,function = "du0"; + }; + du1 { + renesas,groups = "du1_rgb666", "du1_sync_1", "du1_clk_out"; + renesas,function = "du1"; + }; + }; + lan0_pins: lan0 { intc { renesas,groups = "intc_irq1_b"; -- 2.0.4