All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lucas Stach <l.stach@pengutronix.de>
To: Thierry Reding <thierry.reding@gmail.com>
Cc: devicetree@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
	kernel@pengutronix.de, dri-devel@lists.freedesktop.org
Subject: [PATCH 3/3] drm/panel: add Hitachi TX23D38VM0CAA 9" WVGA TFT LCD panel
Date: Thu,  6 Nov 2014 17:44:35 +0100	[thread overview]
Message-ID: <1415292275-29726-3-git-send-email-l.stach@pengutronix.de> (raw)
In-Reply-To: <1415292275-29726-1-git-send-email-l.stach@pengutronix.de>

This patch adds support for the Hitachi TX23D38VM0CAA 9" WVGA TFT LCD panel
to the simple-panel driver.

This panel is connected via LVDS and uses the data enable signal for
timing. Since HSYNC/VSYNC are ignored, the split between sync length and
porches is arbitrary, as long as the complete horizontal blanking interval
is 256 clocks, and the vertical blanking interval is 45 lines.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
 .../bindings/panel/hit,tx23d38vm0caa.txt           |  7 ++++++
 drivers/gpu/drm/panel/panel-simple.c               | 26 ++++++++++++++++++++++
 2 files changed, 33 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/panel/hit,tx23d38vm0caa.txt

diff --git a/Documentation/devicetree/bindings/panel/hit,tx23d38vm0caa.txt b/Documentation/devicetree/bindings/panel/hit,tx23d38vm0caa.txt
new file mode 100644
index 000000000000..04caaae19af6
--- /dev/null
+++ b/Documentation/devicetree/bindings/panel/hit,tx23d38vm0caa.txt
@@ -0,0 +1,7 @@
+Hitachi Ltd. Corporation 9" WVGA (800x480) TFT LCD panel
+
+Required properties:
+- compatible: should be "hit,tx23d38vm0caa"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 159fd8781f99..7d0f5390bb23 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -542,6 +542,29 @@ static const struct panel_desc foxlink_fl500wvr00_a0t = {
 	},
 };
 
+static const struct drm_display_mode hitachi_tx23d38vm0caa_mode = {
+	.clock = 33333,
+	.hdisplay = 800,
+	.hsync_start = 800 + 85,
+	.hsync_end = 800 + 85 + 86,
+	.htotal = 800 + 85 + 86 + 85,
+	.vdisplay = 480,
+	.vsync_start = 480 + 16,
+	.vsync_end = 480 + 16 + 13,
+	.vtotal = 480 + 16 + 13 + 16,
+	.vrefresh = 60,
+};
+
+static const struct panel_desc hitachi_tx23d38vm0caa = {
+	.modes = &hitachi_tx23d38vm0caa_mode,
+	.num_modes = 1,
+	.bpc = 6,
+	.size = {
+		.width = 195,
+		.height = 117,
+	},
+};
+
 static const struct drm_display_mode innolux_g121i1_l01_mode = {
 	.clock = 71000,
 	.hdisplay = 1280,
@@ -690,6 +713,9 @@ static const struct of_device_id platform_of_match[] = {
 		.compatible = "foxlink,fl500wvr00-a0t",
 		.data = &foxlink_fl500wvr00_a0t,
 	}, {
+		.compatible = "hit,tx23d38vm0caa",
+		.data = &hitachi_tx23d38vm0caa
+	}, {
 		.compatible ="innolux,g121i1-l01",
 		.data = &innolux_g121i1_l01
 	}, {
-- 
2.1.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

  parent reply	other threads:[~2014-11-06 16:44 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-11-06 16:44 [PATCH 1/3] drm/panel: add support for Innolux G121I1-L01 12.1" TFT LCD panel Lucas Stach
2014-11-06 16:44 ` [PATCH 2/3] of: Add vendor prefix for Hitachi Ltd. Corporation Lucas Stach
     [not found]   ` <1415292275-29726-2-git-send-email-l.stach-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2014-11-06 17:18     ` Rob Herring
2014-11-06 16:44 ` Lucas Stach [this message]
2014-11-07  9:06 ` [PATCH 1/3] drm/panel: add support for Innolux G121I1-L01 12.1" TFT LCD panel Thierry Reding

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1415292275-29726-3-git-send-email-l.stach@pengutronix.de \
    --to=l.stach@pengutronix.de \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=kernel@pengutronix.de \
    --cc=robh+dt@kernel.org \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.