From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752759AbaKQKjF (ORCPT ); Mon, 17 Nov 2014 05:39:05 -0500 Received: from mail-pd0-f176.google.com ([209.85.192.176]:33334 "EHLO mail-pd0-f176.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752660AbaKQKic (ORCPT ); Mon, 17 Nov 2014 05:38:32 -0500 From: Ankit Jindal To: linux-kernel@vger.kernel.org Cc: "Hans J. Koch" , Greg Kroah-Hartman , patches@apm.com, linux-arm-kernel@lists.infradead.org, Rob Herring , Tushar Jagad , Russell King - ARM Linux , devicetree@vger.kernel.org, Guenter Roeck , Varka Bhadram , Kumar Gala , Anup Patel , =?UTF-8?q?Andreas=20F=C3=A4rber?= , Ankit Jindal Subject: [PATCH v5 5/6] Documentation: dt-bindings: Add binding info for X-Gene QMTM UIO driver Date: Mon, 17 Nov 2014 16:06:11 +0530 Message-Id: <1416220572-13381-6-git-send-email-ankit.jindal@linaro.org> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1416220572-13381-1-git-send-email-ankit.jindal@linaro.org> References: <1416220572-13381-1-git-send-email-ankit.jindal@linaro.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This patch adds device tree binding documentation for X-Gene QMTM UIO driver. Signed-off-by: Ankit Jindal Signed-off-by: Tushar Jagad --- .../devicetree/bindings/uio/uio_xgene_qmtm.txt | 50 ++++++++++++++++++++ 1 file changed, 50 insertions(+) create mode 100644 Documentation/devicetree/bindings/uio/uio_xgene_qmtm.txt diff --git a/Documentation/devicetree/bindings/uio/uio_xgene_qmtm.txt b/Documentation/devicetree/bindings/uio/uio_xgene_qmtm.txt new file mode 100644 index 0000000..7afe78c --- /dev/null +++ b/Documentation/devicetree/bindings/uio/uio_xgene_qmtm.txt @@ -0,0 +1,50 @@ +APM X-Gene QMTM nodes + +The Applied Micro X-Gene SOC has on-chip QMTM (Queue manager +and Traffic manager). It is a device for managing hardware queues. +It also implements QoS among hardware queues hence term "traffic" +manager is present in its name. + +Required properties: +- compatible: Should be "apm,xgene-qmtm" +- reg: Address and length of the register set for the device. It contains the + information of registers in the same order as described by reg-names. +- reg-names: Should contain the register set names + - "csr": QMTM control and status register address space. + - "fabric": QMTM memory mapped access to queue states. +- qpool-memory: Points to the phandle of the node defining memory location for + creating QMTM queues. This must point to the reserved-memory node + (as-per reserved memory bindings). It is expected that size and + location of qpool memory will be configurable via bootloader. +- clocks: Reference to the clock entry. +- num-queues: Number of queues under this QMTM device. +- devid: QMTM identification number for the system having multiple QMTM devices. + This is used to form a unique id (a tuple of queue number and + device id) for the queues belonging to this device. + +Example: + qmtm1_uio_qpool: qmtm1_uio_qpool { + reg = <0x0 0x0 0x0 0x0>; + }; + + qmtm1clk: qmtmclk@1f20c000 { + compatible = "apm,xgene-device-clock"; + clock-output-names = "qmtm1clk"; + }; + + qmtm1_uio: qmtm_uio@1f200000 { + compatible = "apm,xgene-qmtm"; + status = "disabled"; + reg = <0x0 0x1f200000 0x0 0x10000>, + <0x0 0x1b000000 0x0 0x400000>; + reg-names = "csr", "fabric"; + qpool-memory = <&qmtm1_uio_qpool>; + clocks = <&qmtm1clk 0>; + num-queues = <0x400>; + devid = <1>; + }; + + /* Board-specific peripheral configurations */ + &qmtm1_uio { + status = "okay"; + }; -- 1.7.9.5 From mboxrd@z Thu Jan 1 00:00:00 1970 From: ankit.jindal@linaro.org (Ankit Jindal) Date: Mon, 17 Nov 2014 16:06:11 +0530 Subject: [PATCH v5 5/6] Documentation: dt-bindings: Add binding info for X-Gene QMTM UIO driver In-Reply-To: <1416220572-13381-1-git-send-email-ankit.jindal@linaro.org> References: <1416220572-13381-1-git-send-email-ankit.jindal@linaro.org> Message-ID: <1416220572-13381-6-git-send-email-ankit.jindal@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This patch adds device tree binding documentation for X-Gene QMTM UIO driver. Signed-off-by: Ankit Jindal Signed-off-by: Tushar Jagad --- .../devicetree/bindings/uio/uio_xgene_qmtm.txt | 50 ++++++++++++++++++++ 1 file changed, 50 insertions(+) create mode 100644 Documentation/devicetree/bindings/uio/uio_xgene_qmtm.txt diff --git a/Documentation/devicetree/bindings/uio/uio_xgene_qmtm.txt b/Documentation/devicetree/bindings/uio/uio_xgene_qmtm.txt new file mode 100644 index 0000000..7afe78c --- /dev/null +++ b/Documentation/devicetree/bindings/uio/uio_xgene_qmtm.txt @@ -0,0 +1,50 @@ +APM X-Gene QMTM nodes + +The Applied Micro X-Gene SOC has on-chip QMTM (Queue manager +and Traffic manager). It is a device for managing hardware queues. +It also implements QoS among hardware queues hence term "traffic" +manager is present in its name. + +Required properties: +- compatible: Should be "apm,xgene-qmtm" +- reg: Address and length of the register set for the device. It contains the + information of registers in the same order as described by reg-names. +- reg-names: Should contain the register set names + - "csr": QMTM control and status register address space. + - "fabric": QMTM memory mapped access to queue states. +- qpool-memory: Points to the phandle of the node defining memory location for + creating QMTM queues. This must point to the reserved-memory node + (as-per reserved memory bindings). It is expected that size and + location of qpool memory will be configurable via bootloader. +- clocks: Reference to the clock entry. +- num-queues: Number of queues under this QMTM device. +- devid: QMTM identification number for the system having multiple QMTM devices. + This is used to form a unique id (a tuple of queue number and + device id) for the queues belonging to this device. + +Example: + qmtm1_uio_qpool: qmtm1_uio_qpool { + reg = <0x0 0x0 0x0 0x0>; + }; + + qmtm1clk: qmtmclk at 1f20c000 { + compatible = "apm,xgene-device-clock"; + clock-output-names = "qmtm1clk"; + }; + + qmtm1_uio: qmtm_uio at 1f200000 { + compatible = "apm,xgene-qmtm"; + status = "disabled"; + reg = <0x0 0x1f200000 0x0 0x10000>, + <0x0 0x1b000000 0x0 0x400000>; + reg-names = "csr", "fabric"; + qpool-memory = <&qmtm1_uio_qpool>; + clocks = <&qmtm1clk 0>; + num-queues = <0x400>; + devid = <1>; + }; + + /* Board-specific peripheral configurations */ + &qmtm1_uio { + status = "okay"; + }; -- 1.7.9.5