From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lukasz Majewski Subject: [PATCH v2] thermal:core:fix: Check return code of the ->get_max_state() callback Date: Tue, 18 Nov 2014 11:16:30 +0100 Message-ID: <1416305790-27746-1-git-send-email-l.majewski@samsung.com> References: <1415898165-27406-1-git-send-email-l.majewski@samsung.com> Return-path: In-reply-to: <1415898165-27406-1-git-send-email-l.majewski@samsung.com> Sender: linux-pm-owner@vger.kernel.org To: Eduardo Valentin , Zhang Rui Cc: Ezequiel Garcia , Kuninori Morimoto , Linux PM list , Vincenzo Frascino , Bartlomiej Zolnierkiewicz , Lukasz Majewski , Nobuhiro Iwamatsu , Mikko Perttunen , Stephen Warren , Thierry Reding , Alexandre Courbot , linux-tegra@vger.kernel.org, linux-kernel@vger.kernel.org, Lukasz Majewski List-Id: linux-tegra@vger.kernel.org The return code from ->get_max_state() callback was not checked during binding cooling device to thermal zone device. Signed-off-by: Lukasz Majewski --- Changes for v2: - It turned out that patches from 1 to 6 from v1 are not needed, since they either already solve the problem (like imx_thermal.c) or not use cpufreq as a thermal cooling device. - The patch 7 from v1 is also not needed since this patch on error exits this function without using max_state variable. - In thermal driver probe the cpufreq_cooling_register() method presence is crucial to evaluate if the thermal driver needs any actions with -EPROBE_DEFER. --- drivers/thermal/thermal_core.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index 43b9070..8567929 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -928,7 +928,7 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, struct thermal_zone_device *pos1; struct thermal_cooling_device *pos2; unsigned long max_state; - int result; + int result, ret; if (trip >= tz->trips || (trip < 0 && trip != THERMAL_TRIPS_NONE)) return -EINVAL; @@ -945,7 +945,9 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, if (tz != pos1 || cdev != pos2) return -EINVAL; - cdev->ops->get_max_state(cdev, &max_state); + ret = cdev->ops->get_max_state(cdev, &max_state); + if (ret) + return ret; /* lower default 0, upper default max_state */ lower = lower == THERMAL_NO_LIMIT ? 0 : lower; -- 2.0.0.rc2