Re: [PATCH v2] mtd: spi-nor: Add support for cy15x104q

[<Tudor.Ambarus@microchip.com>]

On Wednesday, April 15, 2020 8:28:36 PM EEST Vignesh Raghavendra wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the
> content is safe
> On 09/03/20 2:10 pm, Sascha Hauer wrote:
> > The Cypress cy15b104q and cy15v104q are 4Mbit serial SPI F-RAM devices.
> > Add support for them to the spi-nor driver.
> > 
> > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> > ---
> > 
> > Changes since v1:
> > - Instead of specifying 1024 sectors with a sector size of 512 specify
> > 
> >   512 * 1024 sectos with a sector size of 1. The device has no idea of
> >   sectors and is not erasable, so a sector size of 1 seems to better
> >   reflect reality.
> >  
> >  drivers/mtd/spi-nor/spi-nor.c | 3 +++
> >  1 file changed, 3 insertions(+)
> > 
> > diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
> > index 4fc632ec18fe..a5c1d684364c 100644
> > --- a/drivers/mtd/spi-nor/spi-nor.c
> > +++ b/drivers/mtd/spi-nor/spi-nor.c
> > @@ -2335,6 +2335,9 @@ static const struct flash_info spi_nor_ids[] = {
> > 
> >       { "at45db081d", INFO(0x1f2500, 0, 64 * 1024, 16, SECT_4K) },
> > 
> > +     /* Cypress */
> > +     { "cy15x104q",  INFO6(0x042cc2, 0x7f7f7f, 512 * 1024, 1,
> > SPI_NOR_NO_ERASE) },
> This seems wrong
> 
> As the datasheet for the device says:
> 
> "Device ID
> The CY15B104Q device can be interrogated for its manufacturer, product
> identification, and die revision. The RDID opcode 9Fh allows
> the user to read the manufacturer ID and product ID, both of which are
> read-only bytes. The JEDEC-assigned manufacturer ID places
> the Cypress (Ramtron) identifier in bank 7; therefore, there are six
> bytes of the continuation code 7Fh followed by the single byte C2h.
> There are two bytes of product ID, which includes a family code, a
> density code, a sub code, and the product revision code."
> 
> I am not sure how are you reading 0x4 as the first byte. It should have
> been 6 bytes of 0x7F followed by 0xc2 right?

You're right, I skimmed too quickly through the id.

> 
> Also 0x7F is continuation code and not actual device ID (See JEDEC
> standard JEP106). You will have to extend spi_nor_read_id() function to
> take care of continuation code and read more bytes in order to get the
> actual Manuf/device ID

Right, thanks for the intervention, Vignesh!

Cheers,
ta



______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/