All of lore.kernel.org
 help / color / mirror / Atom feed
From: Todd Previte <tprevite@gmail.com>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH 06/17] drm/i915: Add support functions in debugfs for handling Displayport compliance configuration
Date: Wed, 10 Dec 2014 16:53:06 -0700	[thread overview]
Message-ID: <1418255597-4716-7-git-send-email-tprevite@gmail.com> (raw)
In-Reply-To: <1418255597-4716-1-git-send-email-tprevite@gmail.com>

This patch was previously part of "[PATCH 05/10] drm/i915: Add debugfs interface
for Displayport debug  and compliance testing". Adds two support functions for
handling Displayport configuration parameters that are used for compliance
testing.

Signed-off-by: Todd Previte <tprevite@gmail.com>
---
 drivers/gpu/drm/i915/i915_debugfs.c | 48 +++++++++++++++++++++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index feae100..ce091c1 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -3694,6 +3694,54 @@ static const struct file_operations i915_display_crc_ctl_fops = {
 	.write = display_crc_ctl_write
 };
 
+enum dp_config_param displayport_get_config_param_type(char *input_string)
+{
+	enum dp_config_param param_type = DP_CONFIG_PARAM_INVALID;
+	int i = 0;
+
+	for (i = 0; i < DP_PARAMETER_COUNT; i++) {
+		if (strncmp(input_string, dp_conf_tokens[i],
+			    strlen(dp_conf_tokens[i])) == 0) {
+			param_type = (enum dp_config_param) i;
+			break;
+		}
+	}
+	return param_type;
+}
+
+int value_for_config_param(enum dp_config_param param,
+			   char *input_string,
+			   void *output_value)
+{
+	int status = 0;
+	unsigned int *out_ptr = (unsigned int *)output_value;
+	char *index = input_string;
+
+	switch (param) {
+	case DP_CONFIG_PARAM_CONNECTOR:
+		output_value = (char *)index;
+		break;
+	case DP_CONFIG_PARAM_LINK_RATE:
+	case DP_CONFIG_PARAM_LANE_COUNT:
+	case DP_CONFIG_PARAM_VOLTAGE_SWING:
+	case DP_CONFIG_PARAM_PREEMPHASIS:
+		status = kstrtol(index, 16, (long *)out_ptr);
+		break;
+	case DP_CONFIG_PARAM_HRES:
+	case DP_CONFIG_PARAM_VRES:
+	case DP_CONFIG_PARAM_BPP:
+		status = kstrtol(index, 10, (long *)out_ptr);
+		break;
+	default:
+		/* Unhandled case */
+		status = -EINVAL;
+		*out_ptr = 0;
+		break;
+	}
+
+	return status;
+}
+
 static int displayport_config_ctl_open(struct inode *inode,
 				       struct file *file)
 {
-- 
1.9.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2014-12-10 23:54 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-10 23:53 [intel-gfx] Displayport Compliance Testing V2 Todd Previte
2014-12-10 23:53 ` [PATCH 01/17] drm/i915: Add automated testing support for Displayport compliance testing Todd Previte
2014-12-12 20:25   ` Paulo Zanoni
2015-02-18 16:36     ` Todd Previte
2014-12-10 23:53 ` [PATCH 02/17] drm/i915: Update intel_dp_check_link_status() " Todd Previte
2014-12-15 16:36   ` Paulo Zanoni
2015-02-18 16:36     ` Todd Previte
2015-04-06 23:52       ` Paulo Zanoni
2014-12-10 23:53 ` [PATCH 03/17] drm/i915: Add a delay in Displayport AUX transactions for " Todd Previte
2014-12-15 17:35   ` Paulo Zanoni
2015-02-18 16:37     ` Todd Previte
2014-12-10 23:53 ` [PATCH 04/17] drm/i915: Add debugfs information for Displayport " Todd Previte
2014-12-15 13:11   ` Jani Nikula
2015-02-18 16:37     ` Todd Previte
2014-12-10 23:53 ` [PATCH 05/17] drm/i915: Add file ops for Displayport configuration in debugfs Todd Previte
2014-12-10 23:53 ` Todd Previte [this message]
2014-12-15 19:25   ` [PATCH 06/17] drm/i915: Add support functions in debugfs for handling Displayport compliance configuration Paulo Zanoni
2014-12-10 23:53 ` [PATCH 07/17] drm/i915: Add and implement the debugfs 'show' functions for Displayport compliance Todd Previte
2014-12-16 19:00   ` Paulo Zanoni
2014-12-17 20:12     ` Daniel Vetter
2015-02-18 16:45       ` Todd Previte
2015-02-18 16:41     ` Todd Previte
2014-12-10 23:53 ` [PATCH 08/17] drm/i915: Add Displayport link configuration structure Todd Previte
2014-12-10 23:53 ` [PATCH 09/17] drm/i915: Add config parsing utilities in debugfs for Displayport compliance Todd Previte
2014-12-10 23:53 ` [PATCH 10/17] drm/i915: Implement the 'open' and 'write' debugfs functions " Todd Previte
2014-12-10 23:53 ` [PATCH 11/17] drm/i915: Update the EDID automated compliance test function Todd Previte
2014-12-17 16:25   ` Paulo Zanoni
2014-12-17 20:20     ` Daniel Vetter
     [not found]       ` <54E4C490.7080001@gmail.com>
2015-02-20 16:55         ` Daniel Vetter
2015-02-18 16:47     ` Todd Previte
2015-02-23 15:55   ` Daniel Vetter
2014-12-10 23:53 ` [PATCH 12/17] drm/i915: Update intel_dp_compute_config() to handle compliance test requests Todd Previte
2014-12-17 17:04   ` Paulo Zanoni
2015-01-07 19:28     ` Clint Taylor
2015-02-18 16:59       ` Todd Previte
2014-12-10 23:53 ` [PATCH 13/17] drm/i915: Update intel_dp_hpd_pulse() to check link status for non-MST operation Todd Previte
2014-12-17 17:57   ` Paulo Zanoni
2014-12-17 20:30     ` Daniel Vetter
2015-02-18 17:06       ` Todd Previte
2015-02-18 17:06     ` Todd Previte
2014-12-10 23:53 ` [PATCH 14/17] drm/i915: Add debugfs function to check connector status for compliance testing Todd Previte
2014-12-17 18:03   ` Paulo Zanoni
2015-02-18 17:08     ` Todd Previte
2015-02-18 23:09       ` Todd Previte
2014-12-10 23:53 ` [PATCH 15/17] drm/i915: Update debugfs functions for Displayport " Todd Previte
2014-12-10 23:53 ` [PATCH 16/17] drm/i915: Add new debugfs file for Displaypor compliance test control Todd Previte
2014-12-10 23:53 ` [PATCH 17/17] drm/i915: Add debugfs write and test param parsing function for DP " Todd Previte
2014-12-16  7:13   ` shuang.he

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1418255597-4716-7-git-send-email-tprevite@gmail.com \
    --to=tprevite@gmail.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.