From mboxrd@z Thu Jan 1 00:00:00 1970 From: Masahiro Yamada Date: Mon, 15 Dec 2014 23:26:16 +0900 Subject: [U-Boot] [PATCH 11/26] mpc8xx: remove IP860 board support In-Reply-To: <1418653608-14177-1-git-send-email-yamada.m@jp.panasonic.com> References: <1418653608-14177-1-git-send-email-yamada.m@jp.panasonic.com> Message-ID: <1418653608-14177-12-git-send-email-yamada.m@jp.panasonic.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de This board is still a non-generic board. Signed-off-by: Masahiro Yamada Cc: Wolfgang Denk --- arch/powerpc/cpu/mpc8xx/Kconfig | 4 - arch/powerpc/cpu/mpc8xx/cpu_init.c | 10 - arch/powerpc/cpu/mpc8xx/serial.c | 7 +- board/ip860/Kconfig | 9 - board/ip860/MAINTAINERS | 6 - board/ip860/Makefile | 8 - board/ip860/flash.c | 440 ------------------------------------- board/ip860/ip860.c | 340 ---------------------------- board/ip860/u-boot.lds.debug | 122 ---------- configs/IP860_defconfig | 3 - doc/README.scrapyard | 1 + include/commproc.h | 28 --- include/configs/IP860.h | 438 ------------------------------------ 13 files changed, 2 insertions(+), 1414 deletions(-) delete mode 100644 board/ip860/Kconfig delete mode 100644 board/ip860/MAINTAINERS delete mode 100644 board/ip860/Makefile delete mode 100644 board/ip860/flash.c delete mode 100644 board/ip860/ip860.c delete mode 100644 board/ip860/u-boot.lds.debug delete mode 100644 configs/IP860_defconfig delete mode 100644 include/configs/IP860.h diff --git a/arch/powerpc/cpu/mpc8xx/Kconfig b/arch/powerpc/cpu/mpc8xx/Kconfig index ef5c511..45e7d7e 100644 --- a/arch/powerpc/cpu/mpc8xx/Kconfig +++ b/arch/powerpc/cpu/mpc8xx/Kconfig @@ -13,9 +13,6 @@ config TARGET_COGENT_MPC8XX config TARGET_ESTEEM192E bool "Support ESTEEM192E" -config TARGET_IP860 - bool "Support IP860" - config TARGET_TQM823L bool "Support TQM823L" @@ -56,7 +53,6 @@ endchoice source "board/cogent/Kconfig" source "board/esteem192e/Kconfig" -source "board/ip860/Kconfig" source "board/tqc/tqm8xx/Kconfig" endmenu diff --git a/arch/powerpc/cpu/mpc8xx/cpu_init.c b/arch/powerpc/cpu/mpc8xx/cpu_init.c index 753d25d..f621d62 100644 --- a/arch/powerpc/cpu/mpc8xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc8xx/cpu_init.c @@ -125,12 +125,6 @@ void cpu_init_f (volatile immap_t * immr) * I owe him a free beer. - wd] */ -#if defined(CONFIG_IP860) || \ - defined(CONFIG_RMU) - - memctl->memc_br0 = CONFIG_SYS_BR0_PRELIM; -#endif - #if defined(CONFIG_SYS_OR0_REMAP) memctl->memc_or0 = CONFIG_SYS_OR0_REMAP; #endif @@ -150,10 +144,6 @@ void cpu_init_f (volatile immap_t * immr) memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM; #endif -#if defined(CONFIG_IP860) /* disable CS0 now that Flash is mapped on CS1 */ - memctl->memc_br0 = 0; -#endif - #if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM) memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM; memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM; diff --git a/arch/powerpc/cpu/mpc8xx/serial.c b/arch/powerpc/cpu/mpc8xx/serial.c index bb16b17..af65c96 100644 --- a/arch/powerpc/cpu/mpc8xx/serial.c +++ b/arch/powerpc/cpu/mpc8xx/serial.c @@ -416,18 +416,13 @@ static int scc_init (void) cp->cp_pbdir &= ~0x06; cp->cp_pbodr &= ~0x06; -#elif (SCC_INDEX < 2) || !defined(CONFIG_IP860) +#elif (SCC_INDEX < 2) /* * Standard configuration for SCC's is on Part A */ ip->iop_papar |= ((3 << (2 * SCC_INDEX))); ip->iop_padir &= ~((3 << (2 * SCC_INDEX))); ip->iop_paodr &= ~((3 << (2 * SCC_INDEX))); -#else - /* - * The IP860 has SCC3 and SCC4 on Port D - */ - ip->iop_pdpar |= ((3 << (2 * SCC_INDEX))); #endif /* Allocate space for two buffer descriptors in the DP ram. */ diff --git a/board/ip860/Kconfig b/board/ip860/Kconfig deleted file mode 100644 index 955c9db..0000000 --- a/board/ip860/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_IP860 - -config SYS_BOARD - default "ip860" - -config SYS_CONFIG_NAME - default "IP860" - -endif diff --git a/board/ip860/MAINTAINERS b/board/ip860/MAINTAINERS deleted file mode 100644 index 36d5690..0000000 --- a/board/ip860/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -IP860 BOARD -M: Wolfgang Denk -S: Maintained -F: board/ip860/ -F: include/configs/IP860.h -F: configs/IP860_defconfig diff --git a/board/ip860/Makefile b/board/ip860/Makefile deleted file mode 100644 index 3c60006..0000000 --- a/board/ip860/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = ip860.o flash.o diff --git a/board/ip860/flash.c b/board/ip860/flash.c deleted file mode 100644 index 542b0c8..0000000 --- a/board/ip860/flash.c +++ /dev/null @@ -1,440 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd at denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -#if defined(CONFIG_ENV_IS_IN_FLASH) -# ifndef CONFIG_ENV_ADDR -# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) -# endif -# ifndef CONFIG_ENV_SIZE -# define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE -# endif -# ifndef CONFIG_ENV_SECT_SIZE -# define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE -# endif -#endif - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size (vu_long *addr, flash_info_t *info); -static int write_word (flash_info_t *info, ulong dest, ulong data); -static void flash_get_offsets (ulong base, flash_info_t *info); - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init (void) -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - volatile ip860_bcsr_t *bcsr = (ip860_bcsr_t *)BCSR_BASE; - unsigned long size; - int i; - - /* Init: enable write, - * or we cannot even write flash commands - */ - bcsr->bd_ctrl |= BD_CTRL_FLWE; - - for (i=0; imemc_or1 = CONFIG_SYS_OR_TIMING_FLASH | (-size & 0xFFFF8000); - memctl->memc_br1 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | - (memctl->memc_br1 & ~(BR_BA_MSK)); - - /* Re-do sizing to get full correct info */ - size = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]); - - flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]); - - flash_info[0].size = size; - -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE - /* monitor protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1, - &flash_info[0]); -#endif - -#ifdef CONFIG_ENV_IS_IN_FLASH - /* ENV protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1, - &flash_info[0]); -#endif - return (size); -} - -/*----------------------------------------------------------------------- - */ -static void flash_get_offsets (ulong base, flash_info_t *info) -{ - int i; - - /* all possible flash types - * (28F016SV, 28F160S3, 28F320S3) - * have the same erase block size: 64 kB per chip, - * of 128 kB per bank - */ - - /* set up sector start address table */ - for (i = 0; i < info->sector_count; i++) { - info->start[i] = base; - base += 0x00020000; - } -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_INTEL: printf ("Intel "); break; - default: printf ("Unknown Vendor "); break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_28F016SV: printf ("28F016SV (16 Mbit, 32 x 64k)\n"); - break; - case FLASH_28F160S3: printf ("28F160S3 (16 Mbit, 32 x 512K)\n"); - break; - case FLASH_28F320S3: printf ("28F320S3 (32 Mbit, 64 x 512K)\n"); - break; - default: printf ("Unknown Chip Type\n"); - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i=0; isector_count; ++i) { - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s", - info->start[i], - info->protect[i] ? " (RO)" : " " - ); - } - printf ("\n"); - return; -} - -/*----------------------------------------------------------------------- - */ - - -/*----------------------------------------------------------------------- - */ - -/* - * The following code cannot be run from FLASH! - */ - -static ulong flash_get_size (vu_long *addr, flash_info_t *info) -{ - short i; - ulong value; - ulong base = (ulong)addr; - - /* Write "Intelligent Identifier" command: read Manufacturer ID */ - *addr = 0x90909090; - - value = addr[0]; - switch (value) { - case (MT_MANUFACT & 0x00FF00FF): /* MT or => Intel */ - case (INTEL_ALT_MANU & 0x00FF00FF): - info->flash_id = FLASH_MAN_INTEL; - break; - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return (0); /* no or unknown flash */ - } - - value = addr[1]; /* device ID */ - - switch (value) { - case (INTEL_ID_28F016S): - info->flash_id += FLASH_28F016SV; - info->sector_count = 32; - info->size = 0x00400000; - break; /* => 2x2 MB */ - - case (INTEL_ID_28F160S3): - info->flash_id += FLASH_28F160S3; - info->sector_count = 32; - info->size = 0x00400000; - break; /* => 2x2 MB */ - - case (INTEL_ID_28F320S3): - info->flash_id += FLASH_28F320S3; - info->sector_count = 64; - info->size = 0x00800000; - break; /* => 2x4 MB */ - - default: - info->flash_id = FLASH_UNKNOWN; - return (0); /* => no or unknown flash */ - - } - - /* set up sector start address table */ - for (i = 0; i < info->sector_count; i++) { - info->start[i] = base + (i * 0x00020000); - /* don't know how to check sector protection */ - info->protect[i] = 0; - } - - /* - * Prevent writes to uninitialized FLASH. - */ - if (info->flash_id != FLASH_UNKNOWN) { - addr = (vu_long *)info->start[0]; - - *addr = 0xFFFFFF; /* reset bank to read array mode */ - } - - return (info->size); -} - - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t *info, int s_first, int s_last) -{ - int flag, prot, sect; - ulong start, now, last; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - if ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL) { - printf ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - start = get_timer (0); - last = start; - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect<=s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - vu_long *addr = (vu_long *)(info->start[sect]); - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - /* Single Block Erase Command */ - *addr = 0x20202020; - /* Confirm */ - *addr = 0xD0D0D0D0; - /* Resume Command, as per errata update */ - *addr = 0xD0D0D0D0; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* wait at least 80us - let's wait 1 ms */ - udelay (1000); - - while ((*addr & 0x00800080) != 0x00800080) { - if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - *addr = 0xFFFFFFFF; /* reset bank */ - return 1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc ('.'); - last = now; - } - } - - /* reset to read mode */ - *addr = 0xFFFFFFFF; - } - } - - printf (" done\n"); - return 0; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ - -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - ulong cp, wp, data; - int i, l, rc; - - wp = (addr & ~3); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i=0, cp=wp; i0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt==0 && i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - } - - /* - * handle word aligned part - */ - while (cnt >= 4) { - data = 0; - for (i=0; i<4; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - cnt -= 4; - } - - if (cnt == 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - return (write_word(info, wp, data)); -} - -/*----------------------------------------------------------------------- - * Write a word to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_word (flash_info_t *info, ulong dest, ulong data) -{ - vu_long *addr = (vu_long *)dest; - ulong start, csr; - int flag; - - /* Check if Flash is (sufficiently) erased */ - if ((*addr & data) != data) { - return (2); - } - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - /* Write Command */ - *addr = 0x10101010; - - /* Write Data */ - *addr = data; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* data polling for D7 */ - start = get_timer (0); - flag = 0; - while (((csr = *addr) & 0x00800080) != 0x00800080) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - flag = 1; - break; - } - } - if (csr & 0x00400040) { -printf ("CSR indicates write error (%08lx) at %08lx\n", csr, (ulong)addr); - flag = 1; - } - - /* Clear Status Registers Command */ - *addr = 0x50505050; - /* Reset to read array mode */ - *addr = 0xFFFFFFFF; - - return (flag); -} - -/*----------------------------------------------------------------------- - */ diff --git a/board/ip860/ip860.c b/board/ip860/ip860.c deleted file mode 100644 index 4e3b1b5..0000000 --- a/board/ip860/ip860.c +++ /dev/null @@ -1,340 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd at denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -/* ------------------------------------------------------------------------- */ - -static long int dram_size (long int, long int *, long int); -unsigned long ip860_get_dram_size(void); -unsigned long ip860_get_clk_freq (void); -/* ------------------------------------------------------------------------- */ - -#define _NOT_USED_ 0xFFFFFFFF - -const uint sdram_table[] = { - /* - * Single Read. (Offset 0 in UPMA RAM) - */ - 0x1f07fc04, 0xeeaefc04, 0x11adfc04, 0xefbbbc00, - 0x1ff77c47, /* last */ - /* - * SDRAM Initialization (offset 5 in UPMA RAM) - * - * This is no UPM entry point. The following definition uses - * the remaining space to establish an initialization - * sequence, which is executed by a RUN command. - * - */ - 0x1ff77c34, 0xefeabc34, 0x1fb57c35, /* last */ - /* - * Burst Read. (Offset 8 in UPMA RAM) - */ - 0x1f07fc04, 0xeeaefc04, 0x10adfc04, 0xf0affc00, - 0xf0affc00, 0xf1affc00, 0xefbbbc00, 0x1ff77c47, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * Single Write. (Offset 18 in UPMA RAM) - */ - 0x1f27fc04, 0xeeaebc00, 0x01b93c04, 0x1ff77c47, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * Burst Write. (Offset 20 in UPMA RAM) - */ - 0x1f07fc04, 0xeeaebc00, 0x10ad7c00, 0xf0affc00, - 0xf0affc00, 0xe1bbbc04, 0x1ff77c47, /* last */ - _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * Refresh (Offset 30 in UPMA RAM) - */ - 0x1ff5fc84, 0xfffffc04, 0xfffffc04, 0xfffffc04, - 0xfffffc84, 0xfffffc07, /* last */ - _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * Exception. (Offset 3c in UPMA RAM) - */ - 0x7ffffc07, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, -}; - - -/* ------------------------------------------------------------------------- */ -int board_early_init_f(void) -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - -/* init BCSR chipselect line for ip860_get_clk_freq() and ip860_get_dram_size() */ - memctl->memc_or4 = CONFIG_SYS_OR4; - memctl->memc_br4 = CONFIG_SYS_BR4; - - return 0; -} - - -/* ------------------------------------------------------------------------- */ - -/* - * Check Board Identity: - * - * Test ID string (IP860...) - */ - -int checkboard (void) -{ - unsigned char *s, *e; - unsigned char buf[64]; - int i; - - puts ("Board: "); - - i = getenv_f("serial#", (char *)buf, sizeof (buf)); - s = (i > 0) ? buf : NULL; - - if (!s || strncmp ((char *)s, "IP860", 5)) { - puts ("### No HW ID - assuming IP860"); - } else { - for (e = s; *e; ++e) { - if (*e == ' ') - break; - } - - for (; s < e; ++s) { - putc (*s); - } - } - - putc ('\n'); - - return (0); -} - -/* ------------------------------------------------------------------------- */ - -phys_size_t initdram (int board_type) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - long int size; - ulong refresh_val; - - upmconfig (UPMA, (uint *) sdram_table, - sizeof (sdram_table) / sizeof (uint)); - - /* - * Preliminary prescaler for refresh - */ - if (ip860_get_clk_freq() == 50000000) - { - memctl->memc_mptpr = 0x0400; - refresh_val = 0xC3000000; - } - else - { - memctl->memc_mptpr = 0x0200; - refresh_val = 0x9C000000; - } - - - memctl->memc_mar = 0x00000088; - - /* - * Map controller banks 2 to the SDRAM address - */ - memctl->memc_or2 = CONFIG_SYS_OR2; - memctl->memc_br2 = CONFIG_SYS_BR2; - - /* IP860 boards have only one bank SDRAM */ - - - udelay (200); - - /* perform SDRAM initializsation sequence */ - - memctl->memc_mamr = 0x00804114 | refresh_val; - memctl->memc_mcr = 0x80004105; /* run precharge pattern from loc 5 */ - udelay(1); - memctl->memc_mamr = 0x00804118 | refresh_val; - memctl->memc_mcr = 0x80004130; /* run refresh pattern 8 times */ - - - udelay (1000); - - /* - * Check SDRAM Memory Size - */ - if (ip860_get_dram_size() == 16) - size = dram_size (refresh_val | 0x00804114, SDRAM_BASE, SDRAM_MAX_SIZE); - else - size = dram_size (refresh_val | 0x00906114, SDRAM_BASE, SDRAM_MAX_SIZE); - - udelay (1000); - - memctl->memc_or2 = ((-size) & 0xFFFF0000) | SDRAM_TIMING; - memctl->memc_br2 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V; - - udelay (10000); - - /* - * Also, map other memory to correct position - */ - -#if (defined(CONFIG_SYS_OR1) && defined(CONFIG_SYS_BR1_PRELIM)) - memctl->memc_or1 = CONFIG_SYS_OR1; - memctl->memc_br1 = CONFIG_SYS_BR1; -#endif - -#if defined(CONFIG_SYS_OR3) && defined(CONFIG_SYS_BR3) - memctl->memc_or3 = CONFIG_SYS_OR3; - memctl->memc_br3 = CONFIG_SYS_BR3; -#endif - -#if defined(CONFIG_SYS_OR4) && defined(CONFIG_SYS_BR4) - memctl->memc_or4 = CONFIG_SYS_OR4; - memctl->memc_br4 = CONFIG_SYS_BR4; -#endif - -#if defined(CONFIG_SYS_OR5) && defined(CONFIG_SYS_BR5) - memctl->memc_or5 = CONFIG_SYS_OR5; - memctl->memc_br5 = CONFIG_SYS_BR5; -#endif - -#if defined(CONFIG_SYS_OR6) && defined(CONFIG_SYS_BR6) - memctl->memc_or6 = CONFIG_SYS_OR6; - memctl->memc_br6 = CONFIG_SYS_BR6; -#endif - -#if defined(CONFIG_SYS_OR7) && defined(CONFIG_SYS_BR7) - memctl->memc_or7 = CONFIG_SYS_OR7; - memctl->memc_br7 = CONFIG_SYS_BR7; -#endif - - return (size); -} - -/* ------------------------------------------------------------------------- */ - -/* - * Check memory range for valid RAM. A simple memory test determines - * the actually available RAM size between addresses `base' and - * `base + maxsize'. Some (not all) hardware errors are detected: - * - short between address lines - * - short between data lines - */ - -static long int dram_size (long int mamr_value, long int *base, - long int maxsize) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - - memctl->memc_mamr = mamr_value; - - return (get_ram_size(base, maxsize)); -} - -/* ------------------------------------------------------------------------- */ - -void reset_phy (void) -{ - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - ulong mask = PB_ENET_RESET | PB_ENET_JABD; - ulong reg; - - /* Make sure PHY is not in low-power mode */ - immr->im_cpm.cp_pbpar &= ~(mask); /* GPIO */ - immr->im_cpm.cp_pbodr &= ~(mask); /* active output */ - - /* Set JABD low (no JABber Disable), - * and RESET high (Reset PHY) - */ - reg = immr->im_cpm.cp_pbdat; - reg = (reg & ~PB_ENET_JABD) | PB_ENET_RESET; - immr->im_cpm.cp_pbdat = reg; - - /* now drive outputs */ - immr->im_cpm.cp_pbdir |= mask; /* output */ - udelay (1000); - /* - * Release RESET signal - */ - immr->im_cpm.cp_pbdat &= ~(PB_ENET_RESET); - udelay (1000); -} - -/* ------------------------------------------------------------------------- */ - -unsigned long ip860_get_clk_freq(void) -{ - volatile ip860_bcsr_t *bcsr = (ip860_bcsr_t *)BCSR_BASE; - ulong temp; - uchar sysclk; - - if ((bcsr->bd_status & 0x80) == 0x80) /* bd_rev valid ? */ - sysclk = (bcsr->bd_rev & 0x18) >> 3; - else - sysclk = 0x00; - - switch (sysclk) - { - case 0x00: - temp = 50000000; - break; - - case 0x01: - temp = 80000000; - break; - - default: - temp = 50000000; - break; - } - - return (temp); - -} - - -/* ------------------------------------------------------------------------- */ - -unsigned long ip860_get_dram_size(void) -{ - volatile ip860_bcsr_t *bcsr = (ip860_bcsr_t *)BCSR_BASE; - ulong temp; - uchar dram_size; - - if ((bcsr->bd_status & 0x80) == 0x80) /* bd_rev valid ? */ - dram_size = (bcsr->bd_rev & 0xE0) >> 5; - else - dram_size = 0x00; /* default is 16 MB */ - - switch (dram_size) - { - case 0x00: - temp = 16; - break; - - case 0x01: - temp = 32; - break; - - default: - temp = 16; - break; - } - - return (temp); - -} - -/* ------------------------------------------------------------------------- */ diff --git a/board/ip860/u-boot.lds.debug b/board/ip860/u-boot.lds.debug deleted file mode 100644 index e561bb4..0000000 --- a/board/ip860/u-boot.lds.debug +++ /dev/null @@ -1,122 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd at denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/powerpc/cpu/mpc8xx/start.o (.text) - arch/powerpc/lib/ppcstring.o (.text) - arch/powerpc/cpu/mpc8xx/interrupts.o (.text) - arch/powerpc/lib/time.o (.text) - arch/powerpc/lib/ticks.o (.text) -/** - . = env_offset; - common/env_embedded.o(.text) -**/ - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.rodata) - *(.rodata1) - *(.rodata.str1.4) - *(.eh_frame) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x0FFF) & 0xFFFFF000; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(4096); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(4096); - __init_end = .; - - __bss_start = .; - .bss : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/configs/IP860_defconfig b/configs/IP860_defconfig deleted file mode 100644 index feb243d..0000000 --- a/configs/IP860_defconfig +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_PPC=y -CONFIG_8xx=y -CONFIG_TARGET_IP860=y diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 252b607..0e39857 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order. Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +IP860 powerpc mpc8xx - - Wolfgang Denk IVML24 powerpc mpc8xx - - Wolfgang Denk IVMS8 powerpc mpc8xx - - Wolfgang Denk lwmon powerpc mpc8xx - - Wolfgang Denk diff --git a/include/commproc.h b/include/commproc.h index 6e0a233..c53482c 100644 --- a/include/commproc.h +++ b/include/commproc.h @@ -484,34 +484,6 @@ typedef struct scc_enet { #endif -/*** IP860 **********************************************************/ - -#if defined(CONFIG_IP860) -/* Bits in parallel I/O port registers that have to be set/cleared - * to configure the pins for SCC1 use. - */ -#define PROFF_ENET PROFF_SCC1 -#define CPM_CR_ENET CPM_CR_CH_SCC1 -#define SCC_ENET 0 -#define PA_ENET_RXD ((ushort)0x0001) /* PA 15 */ -#define PA_ENET_TXD ((ushort)0x0002) /* PA 14 */ -#define PA_ENET_RCLK ((ushort)0x0200) /* PA 6 */ -#define PA_ENET_TCLK ((ushort)0x0100) /* PA 7 */ - -#define PC_ENET_TENA ((ushort)0x0001) /* PC 15 */ -#define PC_ENET_CLSN ((ushort)0x0010) /* PC 11 */ -#define PC_ENET_RENA ((ushort)0x0020) /* PC 10 */ - -#define PB_ENET_RESET (uint)0x00000008 /* PB 28 */ -#define PB_ENET_JABD (uint)0x00000004 /* PB 29 */ - -/* Control bits in the SICR to route TCLK (CLK1) and RCLK (CLK2) to - * SCC1. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero. - */ -#define SICR_ENET_MASK ((uint)0x000000ff) -#define SICR_ENET_CLKRT ((uint)0x0000002C) -#endif /* CONFIG_IP860 */ - /*** KM8XX *********************************************************/ /* The KM8XX Service Module uses SCC3 for Ethernet */ diff --git a/include/configs/IP860.h b/include/configs/IP860.h deleted file mode 100644 index 97eda58..0000000 --- a/include/configs/IP860.h +++ /dev/null @@ -1,438 +0,0 @@ -/* - * (C) Copyright 2000-2005 - * Wolfgang Denk, DENX Software Engineering, wd at denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC860 1 /* This is a MPC860 CPU */ -#define CONFIG_IP860 1 /* ...on a IP860 board */ - -#define CONFIG_SYS_TEXT_BASE 0x10000000 - -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ -#define CONFIG_RESET_PHY_R 1 /* Call reset_phy() */ - -#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ -#define CONFIG_BAUDRATE 9600 -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ - -#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo" \ -"\0load=tftp \"/tftpboot/u-boot.bin\"\0update=protect off 1:0;era 1:0;cp.b 100000 10000000 ${filesize}\0" - -#undef CONFIG_BOOTARGS -#define CONFIG_BOOTCOMMAND \ - "bootp; " \ - "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \ - "bootm" - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - - -/* enable I2C and select the hardware/software driver */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ -#define CONFIG_SYS_I2C_SOFT_SPEED 50000 -#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE -/* - * Software (bit-bang) I2C driver configuration - */ -#define PB_SCL 0x00000020 /* PB 26 */ -#define PB_SDA 0x00000010 /* PB 27 */ - -#define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL) -#define I2C_ACTIVE (immr->im_cpm.cp_pbdir |= PB_SDA) -#define I2C_TRISTATE (immr->im_cpm.cp_pbdir &= ~PB_SDA) -#define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0) -#define I2C_SDA(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \ - else immr->im_cpm.cp_pbdat &= ~PB_SDA -#define I2C_SCL(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \ - else immr->im_cpm.cp_pbdat &= ~PB_SCL -#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ - -# define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM X24C16 */ -# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* bytes of address */ -/* mask of address bits that overflow into the "EEPROM chip address" */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* takes up to 10 msec */ - -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ - - -/* - * Command line configuration. - */ -#include - -#define CONFIG_CMD_BEDBUG -#define CONFIG_CMD_I2C -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_NFS -#define CONFIG_CMD_SNTP - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00F00000 /* 1 ... 15MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ - -#define CONFIG_SYS_PIO_MODE 0 /* IDE interface in PIO Mode 0 */ - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xF1000000 /* Non-standard value!! */ - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0x10000000 -#ifdef DEBUG -#define CONFIG_SYS_MONITOR_LEN (512 << 10) /* Reserve 512 kB for Monitor */ -#else -#if 0 /* need more space for I2C tests */ -#define CONFIG_SYS_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */ -#else -#define CONFIG_SYS_MONITOR_LEN (256 << 10) -#endif -#endif -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 124 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#undef CONFIG_ENV_IS_IN_FLASH -#undef CONFIG_ENV_IS_IN_NVRAM -#undef CONFIG_ENV_IS_IN_NVRAM -#undef DEBUG_I2C -#define CONFIG_ENV_IS_IN_EEPROM - -#ifdef CONFIG_ENV_IS_IN_NVRAM -#define CONFIG_ENV_ADDR 0x20000000 /* use SRAM */ -#define CONFIG_ENV_SIZE (16<<10) /* use 16 kB */ -#endif /* CONFIG_ENV_IS_IN_NVRAM */ - -#ifdef CONFIG_ENV_IS_IN_EEPROM -#define CONFIG_ENV_OFFSET 512 /* Leave 512 bytes free for other data */ -#define CONFIG_ENV_SIZE 1536 /* Use remaining space */ -#endif /* CONFIG_ENV_IS_IN_EEPROM */ - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#endif -#define CONFIG_SYS_DELAYED_ICACHE 1 /* enable ICache not before - * running in RAM. - */ - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 11-9 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze - * +0x0004 - */ -#if defined(CONFIG_WATCHDOG) -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ - SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) -#else -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) -#endif - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 11-6 - *----------------------------------------------------------------------- - * +0x0000 => 0x80600800 - */ -#define CONFIG_SYS_SIUMCR (SIUMCR_EARB | SIUMCR_EARP0 | \ - SIUMCR_DBGC11 | SIUMCR_MLRC10) - -/*----------------------------------------------------------------------- - * Clock Setting - get clock frequency from Board Revision Register - *----------------------------------------------------------------------- - */ -#ifndef __ASSEMBLY__ -extern unsigned long ip860_get_clk_freq (void); -#endif -#define CONFIG_8xx_GCLK_FREQ ip860_get_clk_freq() - -/*----------------------------------------------------------------------- - * TBSCR - Time Base Status and Control 11-26 - *----------------------------------------------------------------------- - * Clear Reference Interrupt Status, Timebase freezing enabled - * +0x0200 => 0x00C2 - */ -#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 11-31 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled - * +0x0240 => 0x0082 - */ -#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) - -/*----------------------------------------------------------------------- - * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 - *----------------------------------------------------------------------- - * Reset PLL lock status sticky bit, timer expired status bit and timer - * interrupt status bit, set PLL multiplication factor ! - */ -/* +0x0286 => was: 0x0000D000 */ -#define CONFIG_SYS_PLPRCR \ - ( PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST | \ - /*PLPRCR_CSRC|*/ PLPRCR_LPM_NORMAL | \ - PLPRCR_CSR | PLPRCR_LOLRE /*|PLPRCR_FIOPD*/ \ - ) - -/*----------------------------------------------------------------------- - * SCCR - System Clock and reset Control Register 15-27 - *----------------------------------------------------------------------- - * Set clock output, timebase and RTC source and divider, - * power management and some other internal clocks - */ -#define SCCR_MASK SCCR_EBDF11 -#define CONFIG_SYS_SCCR (SCCR_COM00 | SCCR_TBS | \ - SCCR_RTDIV | SCCR_RTSEL | \ - /*SCCR_CRQEN|*/ /*SCCR_PRQEN|*/ \ - SCCR_EBDF00 | SCCR_DFSYNC00 | \ - SCCR_DFBRG00 | SCCR_DFNL000 | \ - SCCR_DFNH000) - -/*----------------------------------------------------------------------- - * RTCSC - Real-Time Clock Status and Control Register 11-27 - *----------------------------------------------------------------------- - */ -/* +0x0220 => 0x00C3 */ -#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) - - -/*----------------------------------------------------------------------- - * RCCR - RISC Controller Configuration Register 19-4 - *----------------------------------------------------------------------- - */ -/* +0x09C4 => TIMEP=1 */ -#define CONFIG_SYS_RCCR 0x0100 - -/*----------------------------------------------------------------------- - * RMDS - RISC Microcode Development Support Control Register - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_RMDS 0 - -/*----------------------------------------------------------------------- - * DER - Debug Event Register - *----------------------------------------------------------------------- - * - */ -#define CONFIG_SYS_DER 0 - -/* - * Init Memory Controller: - */ - -/* - * MAMR settings for SDRAM - 16-14 - * => 0xC3804114 - */ - -/* periodic timer for refresh */ -#define CONFIG_SYS_MAMR_PTA 0xC3 - -#define CONFIG_SYS_MAMR ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ - MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) -/* - * BR1 and OR1 (FLASH) - */ -#define FLASH_BASE 0x10000000 /* FLASH bank #0 */ - -/* used to re-map FLASH - * restrict access enough to keep SRAM working (if any) - * but not too much to meddle with FLASH accesses - */ -/* allow for max 8 MB of Flash */ -#define CONFIG_SYS_REMAP_OR_AM 0xFF800000 /* OR addr mask */ -#define CONFIG_SYS_PRELIM_OR_AM 0xFF800000 /* OR addr mask */ - -#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV2 | OR_BI | OR_SCY_6_CLK) - -#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -/* 16 bit, bank valid */ -#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE & BR_BA_MSK) | BR_PS_32 | BR_V ) - -#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR0_PRELIM -#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_BR0_PRELIM - -/* - * BR2/OR2 - SDRAM - */ -#define SDRAM_BASE 0x00000000 /* SDRAM bank */ -#define SDRAM_PRELIM_OR_AM 0xF8000000 /* map max. 128 MB */ -#define SDRAM_TIMING 0x00000A00 /* SDRAM-Timing */ - -#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB SDRAM */ - -#define CONFIG_SYS_OR2 (SDRAM_PRELIM_OR_AM | SDRAM_TIMING ) -#define CONFIG_SYS_BR2 ((SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V ) - -/* - * BR3/OR3 - SRAM (16 bit) - */ -#define SRAM_BASE 0x20000000 -#define CONFIG_SYS_OR3 0xFFF00130 /* BI/SCY = 5/TRLX (internal) */ -#define CONFIG_SYS_BR3 ((SRAM_BASE & BR_BA_MSK) | BR_PS_16 | BR_V) -#define SRAM_SIZE (1 + (~(CONFIG_SYS_OR3 & BR_BA_MSK))) -#define CONFIG_SYS_OR3_PRELIM CONFIG_SYS_OR3 /* Make sure to map early */ -#define CONFIG_SYS_BR3_PRELIM CONFIG_SYS_BR3 /* in case it's used for ENV */ -#define CONFIG_SYS_SRAM_BASE SRAM_BASE -#define CONFIG_SYS_SRAM_SIZE SRAM_SIZE - -/* - * BR4/OR4 - Board Control & Status (8 bit) - */ -#define BCSR_BASE 0xFC000000 -#define CONFIG_SYS_OR4 0xFFFF0120 /* BI (internal) */ -#define CONFIG_SYS_BR4 ((BCSR_BASE & BR_BA_MSK) | BR_PS_8 | BR_V) - -/* - * BR5/OR5 - IP Slot A/B (16 bit) - */ -#define IP_SLOT_BASE 0x40000000 -#define CONFIG_SYS_OR5 0xFE00010C /* SETA/TRLX/BI/ SCY=0 (external) */ -#define CONFIG_SYS_BR5 ((IP_SLOT_BASE & BR_BA_MSK) | BR_PS_16 | BR_V) - -/* - * BR6/OR6 - VME STD (16 bit) - */ -#define VME_STD_BASE 0xFE000000 -#define CONFIG_SYS_OR6 0xFF00010C /* SETA/TRLX/BI/SCY=0 (external) */ -#define CONFIG_SYS_BR6 ((VME_STD_BASE & BR_BA_MSK) | BR_PS_16 | BR_V) - -/* - * BR7/OR7 - SHORT I/O + RTC + IACK (16 bit) - */ -#define VME_SHORT_BASE 0xFF000000 -#define CONFIG_SYS_OR7 0xFF00010C /* SETA/TRLX/BI/ SCY=0 (external) */ -#define CONFIG_SYS_BR7 ((VME_SHORT_BASE & BR_BA_MSK) | BR_PS_16 | BR_V) - -/*----------------------------------------------------------------------- - * Board Control and Status Region: - *----------------------------------------------------------------------- - */ -#ifndef __ASSEMBLY__ -typedef struct ip860_bcsr_s { - unsigned char shmem_addr; /* +00 shared memory address register */ - unsigned char reserved0; - unsigned char mbox_addr; /* +02 mailbox address register */ - unsigned char reserved1; - unsigned char vme_int_mask; /* +04 VME Bus interrupt mask register */ - unsigned char reserved2; - unsigned char vme_int_pend; /* +06 VME interrupt pending register */ - unsigned char reserved3; - unsigned char bd_int_mask; /* +08 board interrupt mask register */ - unsigned char reserved4; - unsigned char bd_int_pend; /* +0A board interrupt pending register */ - unsigned char reserved5; - unsigned char bd_ctrl; /* +0C board control register */ - unsigned char reserved6; - unsigned char bd_status; /* +0E board status register */ - unsigned char reserved7; - unsigned char vme_irq; /* +10 VME interrupt request register */ - unsigned char reserved8; - unsigned char vme_ivec; /* +12 VME interrupt vector register */ - unsigned char reserved9; - unsigned char cli_mbox; /* +14 clear mailbox irq */ - unsigned char reservedA; - unsigned char rtc; /* +16 RTC control register */ - unsigned char reservedB; - unsigned char mbox_data; /* +18 mailbox read/write register */ - unsigned char reservedC; - unsigned char wd_trigger; /* +1A Watchdog trigger register */ - unsigned char reservedD; - unsigned char rmw_req; /* +1C RMW request register */ - unsigned char reservedE; - unsigned char bd_rev; /* +1E Board Revision register */ -} ip860_bcsr_t; -#endif /* __ASSEMBLY__ */ - -/*----------------------------------------------------------------------- - * Board Control Register: bd_ctrl (Offset 0x0C) - *----------------------------------------------------------------------- - */ -#define BD_CTRL_IPLSE 0x80 /* IP Slot Long Select Enable */ -#define BD_CTRL_WDOGE 0x40 /* Watchdog Enable */ -#define BD_CTRL_FLWE 0x20 /* Flash Write Enable */ -#define BD_CTRL_RWDN 0x10 /* VMEBus Requester Release When Done Enable */ - -#endif /* __CONFIG_H */ -- 1.9.1