From mboxrd@z Thu Jan 1 00:00:00 1970 From: Masahiro Yamada Date: Mon, 15 Dec 2014 23:26:20 +0900 Subject: [U-Boot] [PATCH 15/26] mpc8260: remove ppmc8260 board support In-Reply-To: <1418653608-14177-1-git-send-email-yamada.m@jp.panasonic.com> References: <1418653608-14177-1-git-send-email-yamada.m@jp.panasonic.com> Message-ID: <1418653608-14177-16-git-send-email-yamada.m@jp.panasonic.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de This board is still a non-generic board. Signed-off-by: Masahiro Yamada Cc: Brad Kemp --- arch/powerpc/cpu/mpc8260/Kconfig | 4 - board/ppmc8260/Kconfig | 9 - board/ppmc8260/MAINTAINERS | 6 - board/ppmc8260/Makefile | 8 - board/ppmc8260/ppmc8260.c | 291 ------------ configs/ppmc8260_defconfig | 3 - doc/README.scrapyard | 1 + include/configs/ppmc8260.h | 986 --------------------------------------- 8 files changed, 1 insertion(+), 1307 deletions(-) delete mode 100644 board/ppmc8260/Kconfig delete mode 100644 board/ppmc8260/MAINTAINERS delete mode 100644 board/ppmc8260/Makefile delete mode 100644 board/ppmc8260/ppmc8260.c delete mode 100644 configs/ppmc8260_defconfig delete mode 100644 include/configs/ppmc8260.h diff --git a/arch/powerpc/cpu/mpc8260/Kconfig b/arch/powerpc/cpu/mpc8260/Kconfig index bdaf126..d4132a0 100644 --- a/arch/powerpc/cpu/mpc8260/Kconfig +++ b/arch/powerpc/cpu/mpc8260/Kconfig @@ -37,9 +37,6 @@ config TARGET_PM826 config TARGET_PM828 bool "Support PM828" -config TARGET_PPMC8260 - bool "Support ppmc8260" - config TARGET_MPC8266ADS bool "Support MPC8266ADS" @@ -64,6 +61,5 @@ source "board/keymile/km82xx/Kconfig" source "board/muas3001/Kconfig" source "board/pm826/Kconfig" source "board/pm828/Kconfig" -source "board/ppmc8260/Kconfig" endmenu diff --git a/board/ppmc8260/Kconfig b/board/ppmc8260/Kconfig deleted file mode 100644 index 1a6dcd3..0000000 --- a/board/ppmc8260/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_PPMC8260 - -config SYS_BOARD - default "ppmc8260" - -config SYS_CONFIG_NAME - default "ppmc8260" - -endif diff --git a/board/ppmc8260/MAINTAINERS b/board/ppmc8260/MAINTAINERS deleted file mode 100644 index 8b896af..0000000 --- a/board/ppmc8260/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -PPMC8260 BOARD -#M: Brad Kemp -S: Orphan (since 2014-04) -F: board/ppmc8260/ -F: include/configs/ppmc8260.h -F: configs/ppmc8260_defconfig diff --git a/board/ppmc8260/Makefile b/board/ppmc8260/Makefile deleted file mode 100644 index 3072fb4..0000000 --- a/board/ppmc8260/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := ppmc8260.o diff --git a/board/ppmc8260/ppmc8260.c b/board/ppmc8260/ppmc8260.c deleted file mode 100644 index f0f29b2..0000000 --- a/board/ppmc8260/ppmc8260.c +++ /dev/null @@ -1,291 +0,0 @@ -/* - * (C) Copyright 2000 - * Sysgo Real-Time Solutions, GmbH - * Marius Groeger - * - * (C) Copyright 2001 - * Advent Networks, Inc. - * Jay Monkman - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -/* - * I/O Port configuration table - * - * if conf is 1, then that port pin will be configured at boot time - * according to the five values podr/pdir/ppar/psor/pdat for that entry - */ - -const iop_conf_t iop_conf_tab[4][32] = { - - - /* Port A configuration */ - { /* conf ppar psor pdir podr pdat */ - /* PA31 */ { 0, 0, 0, 0, 0, 0 }, /* FCC1 *ATMTXEN */ - /* PA30 */ { 0, 0, 0, 0, 0, 0 }, /* FCC1 ATMTCA */ - /* PA29 */ { 0, 0, 0, 0, 0, 0 }, /* FCC1 ATMTSOC */ - /* PA28 */ { 0, 0, 0, 0, 0, 0 }, /* FCC1 *ATMRXEN */ - /* PA27 */ { 0, 0, 0, 0, 0, 0 }, /* FCC1 ATMRSOC */ - /* PA26 */ { 0, 0, 0, 0, 0, 0 }, /* FCC1 ATMRCA */ - /* PA25 */ { 0, 0, 0, 0, 0, 0 }, /* FCC1 ATMTXD[0] */ - /* PA24 */ { 0, 0, 0, 0, 0, 0 }, /* FCC1 ATMTXD[1] */ - /* PA23 */ { 0, 0, 0, 0, 0, 0 }, /* FCC1 ATMTXD[2] */ - /* PA22 */ { 0, 0, 0, 0, 0, 0 }, /* FCC1 ATMTXD[3] */ - /* PA21 */ { 0, 0, 0, 0, 0, 0 }, /* FCC1 ATMTXD[4] */ - /* PA20 */ { 0, 0, 0, 0, 0, 0 }, /* FCC1 ATMTXD[5] */ - /* PA19 */ { 0, 0, 0, 0, 0, 0 }, /* FCC1 ATMTXD[6] */ - /* PA18 */ { 0, 0, 0, 0, 0, 0 }, /* FCC1 ATMTXD[7] */ - /* PA17 */ { 0, 0, 0, 0, 0, 0 }, /* FCC1 ATMRXD[7] */ - /* PA16 */ { 0, 0, 0, 0, 0, 0 }, /* FCC1 ATMRXD[6] */ - /* PA15 */ { 0, 0, 0, 0, 0, 0 }, /* FCC1 ATMRXD[5] */ - /* PA14 */ { 0, 0, 0, 0, 0, 0 }, /* FCC1 ATMRXD[4] */ - /* PA13 */ { 0, 0, 0, 0, 0, 0 }, /* FCC1 ATMRXD[3] */ - /* PA12 */ { 0, 0, 0, 0, 0, 0 }, /* FCC1 ATMRXD[2] */ - /* PA11 */ { 0, 0, 0, 0, 0, 0 }, /* FCC1 ATMRXD[1] */ - /* PA10 */ { 0, 0, 0, 0, 0, 0 }, /* FCC1 ATMRXD[0] */ - /* PA9 */ { 1, 1, 0, 1, 0, 0 }, /* SMC2 TXD */ - /* PA8 */ { 1, 1, 0, 0, 0, 0 }, /* SMC2 RXD */ - /* PA7 */ { 1, 0, 0, 1, 0, 0 }, /* TDM_A1:L1TSYNC */ - /* PA6 */ { 1, 0, 0, 1, 0, 0 }, /* TDN_A1:L1RSYNC */ - /* PA5 */ { 0, 0, 0, 0, 0, 0 }, /* PA5 */ - /* PA4 */ { 0, 0, 0, 0, 0, 0 }, /* PA4 */ - /* PA3 */ { 0, 0, 0, 0, 0, 0 }, /* PA3 */ - /* PA2 */ { 0, 0, 0, 0, 0, 0 }, /* PA2 */ - /* PA1 */ { 0, 0, 0, 0, 0, 0 }, /* PA1 */ - /* PA0 */ { 0, 0, 0, 0, 0, 0 } /* PA0 */ - }, - - /* Port B configuration */ - { /* conf ppar psor pdir podr pdat */ - /* PB31 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */ - /* PB30 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */ - /* PB29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */ - /* PB28 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */ - /* PB27 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */ - /* PB26 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */ - /* PB25 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */ - /* PB24 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */ - /* PB23 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */ - /* PB22 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */ - /* PB21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */ - /* PB20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */ - /* PB19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */ - /* PB18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */ - /* PB17 */ { 0, 0, 0, 0, 0, 0 }, /* PB17 */ - /* PB16 */ { 1, 0, 0, 0, 0, 0 }, /* TDM_A1:L1CLK0 */ - /* PB15 */ { 1, 0, 0, 1, 0, 1 }, /* /FETHRST */ - /* PB14 */ { 1, 0, 0, 1, 0, 0 }, /* FETHDIS */ - /* PB13 */ { 0, 0, 0, 0, 0, 0 }, /* PB13 */ - /* PB12 */ { 1, 0, 0, 1, 0, 0 }, /* TDM_B1:L1CLK0 */ - /* PB11 */ { 1, 0, 0, 1, 0, 0 }, /* TDM_D1:L1TXD */ - /* PB10 */ { 1, 0, 0, 1, 0, 0 }, /* TDM_D1:L1RXD */ - /* PB9 */ { 1, 0, 0, 1, 0, 0 }, /* TDM_D1:L1TSYNC */ - /* PB8 */ { 1, 0, 0, 1, 0, 0 }, /* TDM_D1:L1RSYNC */ - /* PB7 */ { 0, 0, 0, 0, 0, 0 }, /* PB7 */ - /* PB6 */ { 0, 0, 0, 0, 0, 0 }, /* PB6 */ - /* PB5 */ { 0, 0, 0, 0, 0, 0 }, /* PB5 */ - /* PB4 */ { 0, 0, 0, 0, 0, 0 }, /* PB4 */ - /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */ - }, - - /* Port C */ - { /* conf ppar psor pdir podr pdat */ - /* PC31 */ { 0, 0, 0, 0, 0, 0 }, /* PC31 */ - /* PC30 */ { 0, 0, 0, 0, 0, 0 }, /* PC30 */ - /* PC29 */ { 0, 0, 0, 0, 0, 0 }, /* PC28 */ - /* PC28 */ { 1, 1, 0, 0, 0, 0 }, /* CLK4 */ - /* PC27 */ { 0, 0, 0, 0, 0, 0 }, /* PC27 */ - /* PC26 */ { 0, 0, 0, 0, 0, 0 }, /* PC26 */ - /* PC25 */ { 1, 1, 0, 0, 0, 0 }, /* CLK7 */ - /* PC24 */ { 0, 0, 0, 0, 0, 0 }, /* PC24 */ - /* PC23 */ { 1, 0, 0, 1, 0, 0 }, /* ATMTFCLK */ - /* PC22 */ { 0, 0, 0, 0, 0, 0 }, /* PC22 */ - /* PC21 */ { 0, 0, 0, 0, 0, 0 }, /* PC23 */ - /* PC20 */ { 0, 0, 0, 0, 0, 0 }, /* PC24 */ - /* PC19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_CLK */ - /* PC18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII TX_CLK */ - /* PC17 */ { 0, 0, 0, 0, 0, 0 }, /* PC17 */ - /* PC16 */ { 0, 0, 0, 0, 0, 0 }, /* PC16 */ - /* PC15 */ { 1, 0, 0, 1, 0, 0 }, /* FCC1:TxAddr[0] */ - /* PC14 */ { 1, 0, 0, 1, 0, 0 }, /* FCC1:RxAddr[0] */ - /* PC13 */ { 1, 0, 0, 1, 0, 0 }, /* FCC1:TxAddr[1] */ - /* PC12 */ { 1, 0, 0, 1, 0, 0 }, /* FCC1:RxAddr[1] */ - /* PC11 */ { 1, 1, 0, 1, 0, 0 }, /* TDM_D1:L1CLK0 */ - /* PC10 */ { 1, 0, 0, 1, 0, 0 }, /* FCC2 MDC */ - /* PC9 */ { 1, 0, 0, 1, 0, 0 }, /* FCC2 MDIO */ - /* PC8 */ { 0, 0, 0, 0, 0, 0 }, /* PC8 */ - /* PC7 */ { 1, 0, 0, 1, 0, 0 }, /* FCC1:TxAddr[2]*/ - /* PC6 */ { 1, 0, 0, 1, 0, 0 }, /* FCC1:RxAddr[2] */ - /* PC5 */ { 0, 0, 0, 0, 0, 0 }, /* PC5 */ - /* PC4 */ { 0, 0, 0, 0, 0, 0 }, /* PC4 */ - /* PC3 */ { 1, 0, 0, 1, 0, 0 }, /* IDMA2:DACK */ - /* PC2 */ { 1, 0, 0, 1, 0, 0 }, /* IDMA2:DONE */ - /* PC1 */ { 1, 0, 0, 1, 0, 0 }, /* IDMA2:DREQ */ - /* PC0 */ { 1, 0, 0, 1, 0, 0 }, /* IDMA1:DREQ */ - }, - - /* Port D */ - { /* conf ppar psor pdir podr pdat */ - /* PD31 */ { 0, 0, 0, 0, 0, 0 }, /* PD31 */ - /* PD30 */ { 0, 0, 0, 0, 0, 0 }, /* PD30 */ - /* PD29 */ { 1, 0, 0, 1, 0, 0 }, /* FCC1:RxAddr[3] */ - /* PD28 */ { 0, 0, 0, 0, 0, 0 }, /* PD28 */ - /* PD27 */ { 0, 0, 0, 0, 0, 0 }, /* PD27 */ - /* PD26 */ { 1, 0, 0, 1, 0, 0 }, /* TDM_C1:L1RSYNC */ - /* PD25 */ { 0, 0, 0, 0, 0, 0 }, /* PD25 */ - /* PD24 */ { 0, 0, 0, 0, 0, 0 }, /* PD24 */ - /* PD23 */ { 0, 0, 0, 0, 0, 0 }, /* PD23 */ - /* PD22 */ { 0, 0, 0, 0, 0, 0 }, /* PD22 */ - /* PD21 */ { 0, 0, 0, 0, 0, 0 }, /* PD21 */ - /* PD20 */ { 0, 0, 0, 0, 0, 0 }, /* PD20 */ - /* PD19 */ { 0, 0, 0, 0, 0, 0 }, /* PD19 */ - /* PD18 */ { 0, 0, 0, 0, 0, 0 }, /* PD19 */ - /* PD17 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXPRTY */ - /* PD16 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXPRTY */ - /* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA */ - /* PD14 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SCL */ - /* PD13 */ { 1, 0, 0, 0, 0, 0 }, /* TDM_B1:L1TXD */ - /* PD12 */ { 1, 0, 0, 0, 0, 0 }, /* TDM_B1:L1RXD */ - /* PD11 */ { 1, 0, 0, 0, 0, 0 }, /* TDM_B1:L1TSYNC */ - /* PD10 */ { 1, 0, 0, 0, 0, 0 }, /* TDM_B1:L1RSYNC*/ - /* PD9 */ { 1, 1, 0, 1, 0, 0 }, /* SMC1:TXD */ - /* PD8 */ { 1, 1, 0, 0, 0, 0 }, /* SMC1:RXD */ - /* PD7 */ { 1, 1, 0, 0, 0, 0 }, /* SMC1:SMSYN */ - /* PD6 */ { 1, 0, 0, 1, 0, 0 }, /* IDMA1:DACK */ - /* PD5 */ { 1, 0, 0, 1, 0, 0 }, /* IDMA1:DONE */ - /* PD4 */ { 0, 0, 0, 0, 0, 0 }, /* PD4 */ - /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */ - } -}; - -/* ------------------------------------------------------------------------- */ - -/* - * Check Board Identity: - */ - -int checkboard (void) -{ - puts ("Board: Wind River PPMC8260\n"); - return 0; -} - -/* ------------------------------------------------------------------------- */ - -phys_size_t initdram (int board_type) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8260_t *memctl = &immap->im_memctl; - volatile uchar c = 0xff; - volatile uchar *ramaddr0 = (uchar *) (CONFIG_SYS_SDRAM0_BASE); - volatile uchar *ramaddr1 = (uchar *) (CONFIG_SYS_SDRAM1_BASE); - ulong psdmr = CONFIG_SYS_PSDMR; - volatile uchar *ramaddr2 = (uchar *) (CONFIG_SYS_SDRAM2_BASE); - ulong lsdmr = CONFIG_SYS_LSDMR; - int i; - - /* - * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35): - * - * "At system reset, initialization software must set up the - * programmable parameters in the memory controller banks registers - * (ORx, BRx, P/LSDMR). After all memory parameters are configured, - * system software should execute the following initialization sequence - * for each SDRAM device. - * - * 1. Issue a PRECHARGE-ALL-BANKS command - * 2. Issue eight CBR REFRESH commands - * 3. Issue a MODE-SET command to initialize the mode register - * - * The initial commands are executed by setting P/LSDMR[OP] and - * accessing the SDRAM with a single-byte transaction." - * - * The appropriate BRx/ORx registers have already been set when we - * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE. - */ - - memctl->memc_psrt = CONFIG_SYS_PSRT; - memctl->memc_mptpr = CONFIG_SYS_MPTPR; - -#ifndef CONFIG_SYS_RAMBOOT - memctl->memc_psdmr = psdmr | PSDMR_OP_PREA; - *ramaddr0++ = c; - *ramaddr1++ = c; - - memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR; - for (i = 0; i < 8; i++) { - *ramaddr0++ = c; - *ramaddr1++ = c; - } - - memctl->memc_psdmr = psdmr | PSDMR_OP_MRW; - ramaddr0 = (uchar *) (CONFIG_SYS_SDRAM0_BASE + 0x110); - ramaddr1 = (uchar *) (CONFIG_SYS_SDRAM1_BASE + 0x110); - *ramaddr0 = c; - *ramaddr1 = c; - - memctl->memc_psdmr = psdmr | PSDMR_OP_NORM | PSDMR_RFEN; - *ramaddr0 = c; - *ramaddr1 = c; - - memctl->memc_lsdmr = lsdmr | PSDMR_OP_PREA; - *ramaddr2++ = c; - - memctl->memc_lsdmr = lsdmr | PSDMR_OP_CBRR; - for (i = 0; i < 8; i++) { - *ramaddr2++ = c; - } - - memctl->memc_lsdmr = lsdmr | PSDMR_OP_MRW; - *ramaddr2++ = c; - - memctl->memc_lsdmr = lsdmr | PSDMR_OP_NORM | PSDMR_RFEN; - *ramaddr2 = c; -#endif - - /* return total ram size */ - return ((CONFIG_SYS_SDRAM0_SIZE + CONFIG_SYS_SDRAM1_SIZE) * 1024 * 1024); -} - -#ifdef CONFIG_MISC_INIT_R -/* ------------------------------------------------------------------------- */ -int misc_init_r (void) -{ -#ifdef CONFIG_SYS_LED_BASE - uchar ds = *(unsigned char *) (CONFIG_SYS_LED_BASE + 1); - uchar ss; - uchar tmp[64]; - int res; - - if ((ds != 0) && (ds != 0xff)) { - res = getenv_f("ethaddr", (char *)tmp, sizeof (tmp)); - if (res > 0) { - ss = ((ds >> 4) & 0x0f); - ss += ss < 0x0a ? '0' : ('a' - 10); - tmp[15] = ss; - - ss = (ds & 0x0f); - ss += ss < 0x0a ? '0' : ('a' - 10); - tmp[16] = ss; - - tmp[17] = '\0'; - setenv ("ethaddr", (char *)tmp); - /* set the led to show the address */ - *((unsigned char *) (CONFIG_SYS_LED_BASE + 1)) = ds; - } - } -#endif /* CONFIG_SYS_LED_BASE */ - return (0); -} -#endif /* CONFIG_MISC_INIT_R */ diff --git a/configs/ppmc8260_defconfig b/configs/ppmc8260_defconfig deleted file mode 100644 index e8eb4f7..0000000 --- a/configs/ppmc8260_defconfig +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC8260=y -CONFIG_TARGET_PPMC8260=y diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 5b71bc9..0845651 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order. Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +ppmc8260 powerpc mpc8260 - - Brad Kemp sacsng powerpc mpc8260 - - Jerry Van Baren cogent_mpc8260 powerpc mpc8260 - - Murray Jensen cogent_8xx powerpc mpc8xx - - Murray Jensen diff --git a/include/configs/ppmc8260.h b/include/configs/ppmc8260.h deleted file mode 100644 index 5dcd9cc..0000000 --- a/include/configs/ppmc8260.h +++ /dev/null @@ -1,986 +0,0 @@ -/* - * (C) Copyright 2000 - * Murray Jensen - * - * (C) Copyright 2000 - * Sysgo Real-Time Solutions, GmbH - * Marius Groeger - * - * (C) Copyright 2001 - * Advent Networks, Inc. - * Jay Monkman - * - * Configuation settings for the WindRiver PPMC8260 board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_SYS_TEXT_BASE 0xfe000000 - -/***************************************************************************** - * - * These settings must match the way _your_ board is set up - * - *****************************************************************************/ - -/* What is the oscillator's (UX2) frequency in Hz? */ -#define CONFIG_8260_CLKIN (66 * 1000 * 1000) - -/*----------------------------------------------------------------------- - * MODCK_H & MODCLK[1-3] - Ref: Section 9.2 in MPC8206 User Manual - *----------------------------------------------------------------------- - * What should MODCK_H be? It is dependent on the oscillator - * frequency, MODCK[1-3], and desired CPM and core frequencies. - * Here are some example values (all frequencies are in MHz): - * - * MODCK_H MODCK[1-3] Osc CPM Core S2-6 S2-7 S2-8 - * ------- ---------- --- --- ---- ----- ----- ----- - * 0x2 0x2 33 133 133 Close Open Close - * 0x2 0x3 33 133 166 Close Open Open - * 0x2 0x4 33 133 200 Open Close Close - * 0x2 0x5 33 133 233 Open Close Open - * 0x2 0x6 33 133 266 Open Open Close - * - * 0x5 0x5 66 133 133 Open Close Open - * 0x5 0x6 66 133 166 Open Open Close - * 0x5 0x7 66 133 200 Open Open Open - * 0x6 0x0 66 133 233 Close Close Close - * 0x6 0x1 66 133 266 Close Close Open - * 0x6 0x2 66 133 300 Close Open Close - */ -#define CONFIG_SYS_PPMC_MODCK_H 0x05 - -/* Define this if you want to boot from 0x00000100. If you don't define - * this, you will need to program the bootloader to 0xfff00000, and - * get the hardware reset config words at 0xfe000000. The simplest - * way to do that is to program the bootloader at both addresses. - * It is suggested that you just let U-Boot live at 0x00000000. - */ -#define CONFIG_SYS_PPMC_BOOT_LOW 1 - -/* What should the base address of the main FLASH be and how big is - * it (in MBytes)? This must contain CONFIG_SYS_TEXT_BASE from board/ppmc8260/config.mk - * The main FLASH is whichever is connected to *CS0. U-Boot expects - * this to be the SIMM. - */ -#define CONFIG_SYS_FLASH0_BASE 0xFE000000 -#define CONFIG_SYS_FLASH0_SIZE 16 - -/* What should be the base address of the first SDRAM DIMM and how big is - * it (in Mbytes)? -*/ -#define CONFIG_SYS_SDRAM0_BASE 0x00000000 -#define CONFIG_SYS_SDRAM0_SIZE 128 - -/* What should be the base address of the second SDRAM DIMM and how big is - * it (in Mbytes)? -*/ -#define CONFIG_SYS_SDRAM1_BASE 0x08000000 -#define CONFIG_SYS_SDRAM1_SIZE 128 - -/* What should be the base address of the on board SDRAM and how big is - * it (in Mbytes)? -*/ -#define CONFIG_SYS_SDRAM2_BASE 0x38000000 -#define CONFIG_SYS_SDRAM2_SIZE 16 - -/* What should be the base address of the MAILBOX and how big is it - * (in Bytes) - * The eeprom lives at CONFIG_SYS_MAILBOX_BASE + 0x80000000 - */ -#define CONFIG_SYS_MAILBOX_BASE 0x32000000 -#define CONFIG_SYS_MAILBOX_SIZE 8192 - -/* What is the base address of the I/O select lines and how big is it - * (In Mbytes)? - */ - -#define CONFIG_SYS_IOSELECT_BASE 0xE0000000 -#define CONFIG_SYS_IOSELECT_SIZE 32 - - -/* What should be the base address of the LEDs and switch S0? - * If you don't want them enabled, don't define this. - */ -#define CONFIG_SYS_LED_BASE 0xF1000000 - -/* - * PPMC8260 with 256 16 MB DIMM: - * - * 0x0000 0000 Exception Vector code, 8k - * : - * 0x0000 1FFF - * 0x0000 2000 Free for Application Use - * : - * : - * - * : - * : - * 0x0FF5 FF30 Monitor Stack (Growing downward) - * Monitor Stack Buffer (0x80) - * 0x0FF5 FFB0 Board Info Data - * 0x0FF6 0000 Malloc Arena - * : CONFIG_ENV_SECT_SIZE, 256k - * : CONFIG_SYS_MALLOC_LEN, 128k - * 0x0FFC 0000 RAM Copy of Monitor Code - * : CONFIG_SYS_MONITOR_LEN, 256k - * 0x0FFF FFFF [End of RAM], CONFIG_SYS_SDRAM_SIZE - 1 - */ - - -/* - * select serial console configuration - * - * if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then - * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4 - * for SCC). - * - * if CONFIG_CONS_NONE is defined, then the serial console routines must - * defined elsewhere. - * The console can be on SMC1 or SMC2 - */ -#define CONFIG_CONS_ON_SMC 1 /* define if console on SMC */ -#undef CONFIG_CONS_ON_SCC /* define if console on SCC */ -#undef CONFIG_CONS_NONE /* define if console on neither */ -#define CONFIG_CONS_INDEX 1 /* which SMC/SCC channel for console */ - -/* - * select ethernet configuration - * - * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then - * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3 - * for FCC) - * - * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. - */ - -#undef CONFIG_ETHER_ON_SCC /* define if ethernet on SCC */ -#define CONFIG_ETHER_ON_FCC /* define if ethernet on FCC */ -#undef CONFIG_ETHER_NONE /* define if ethernet on neither */ -#define CONFIG_ETHER_INDEX 2 /* which SCC/FCC channel for ethernet */ -#define CONFIG_MII /* MII PHY management */ -#define CONFIG_BITBANGMII /* bit-bang MII PHY management */ -/* - * Port pins used for bit-banged MII communictions (if applicable). - */ -#define MDIO_PORT 2 /* Port C */ -#define MDIO_DECLARE volatile ioport_t *iop = ioport_addr ( \ - (immap_t *) CONFIG_SYS_IMMR, MDIO_PORT ) -#define MDC_DECLARE MDIO_DECLARE - -#define MDIO_ACTIVE (iop->pdir |= 0x00400000) -#define MDIO_TRISTATE (iop->pdir &= ~0x00400000) -#define MDIO_READ ((iop->pdat & 0x00400000) != 0) - -#define MDIO(bit) if(bit) iop->pdat |= 0x00400000; \ - else iop->pdat &= ~0x00400000 - -#define MDC(bit) if(bit) iop->pdat |= 0x00200000; \ - else iop->pdat &= ~0x00200000 - -#define MIIDELAY udelay(1) - - -/* Define this to reserve an entire FLASH sector (256 KB) for - * environment variables. Otherwise, the environment will be - * put in the same sector as U-Boot, and changing variables - * will erase U-Boot temporarily - */ -#define CONFIG_ENV_IN_OWN_SECT 1 - -/* Define to allow the user to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -/* What should the console's baud rate be? */ -#define CONFIG_BAUDRATE 9600 - -/* Ethernet MAC address */ - -#define CONFIG_ETHADDR 00:a0:1e:90:2b:00 - -/* Define this to set the last octet of the ethernet address - * from the DS0-DS7 switch and light the leds with the result - * The DS0-DS7 switch and the leds are backwards with respect - * to each other. DS7 is on the board edge side of both the - * led strip and the DS0-DS7 switch. - */ -#define CONFIG_MISC_INIT_R - -/* Set to a positive value to delay for running BOOTCOMMAND */ -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ - -#if 0 -/* Be selective on what keys can delay or stop the autoboot process - * To stop use: " " - */ -# define CONFIG_AUTOBOOT_KEYED -# define CONFIG_AUTOBOOT_PROMPT \ - "Autobooting in %d seconds, press \" \" to stop\n", bootdelay -# define CONFIG_AUTOBOOT_STOP_STR " " -# undef CONFIG_AUTOBOOT_DELAY_STR -# define DEBUG_BOOTKEYS 0 -#endif - -/* Define a command string that is automatically executed when no character - * is read on the console interface withing "Boot Delay" after reset. - */ -#undef CONFIG_BOOT_ROOT_INITRD /* Use ram disk for the root file system */ -#define CONFIG_BOOT_ROOT_NFS /* Use a NFS mounted root file system */ - -#ifdef CONFIG_BOOT_ROOT_INITRD -#define CONFIG_BOOTCOMMAND \ - "version;" \ - "echo;" \ - "bootp;" \ - "setenv bootargs root=/dev/ram0 rw " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;" \ - "bootm" -#endif /* CONFIG_BOOT_ROOT_INITRD */ - -#ifdef CONFIG_BOOT_ROOT_NFS -#define CONFIG_BOOTCOMMAND \ - "version;" \ - "echo;" \ - "bootp;" \ - "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;" \ - "bootm" -#endif /* CONFIG_BOOT_ROOT_NFS */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_DNS - - -/* undef this to save memory */ -#define CONFIG_SYS_LONGHELP - -/* Monitor Command Prompt */ - - -/* - * Command line configuration. - */ -#include - -#define CONFIG_CMD_ELF -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_REGINFO -#define CONFIG_CMD_MEMTEST -#define CONFIG_CMD_MII -#define CONFIG_CMD_IMMAP - -#undef CONFIG_CMD_KGDB - - -/* Where do the internal registers live? */ -#define CONFIG_SYS_IMMR 0xf0000000 - -/***************************************************************************** - * - * You should not have to modify any of the following settings - * - *****************************************************************************/ - -#define CONFIG_PPMC8260 1 /* on an Wind River PPMC8260 Board */ -#define CONFIG_CPM2 1 /* Has a CPM2 */ - -/* - * Miscellaneous configurable options - */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -# define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif - -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT)+16) - -#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ - -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_LOAD_ADDR 0x140000 /* default load address */ - -#define CONFIG_SYS_MEMTEST_START 0x2000 /* memtest works from the end of */ - /* the exception vector table */ - /* to the end of the DRAM */ - /* less monitor and malloc area */ -#define CONFIG_SYS_STACK_USAGE 0x10000 /* Reserve 64k for the stack usage */ -#define CONFIG_SYS_MEM_END_USAGE ( CONFIG_SYS_MONITOR_LEN \ - + CONFIG_SYS_MALLOC_LEN \ - + CONFIG_ENV_SECT_SIZE \ - + CONFIG_SYS_STACK_USAGE ) - -#define CONFIG_SYS_MEMTEST_END ( CONFIG_SYS_SDRAM_SIZE * 1024 * 1024 \ - - CONFIG_SYS_MEM_END_USAGE ) - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ - -#if defined(CONFIG_ETHER_ON_SCC) && (CONFIG_ETHER_INDEX == 1) -/* - * Attention: This is board specific - * - RX clk is CLK11 - * - TX clk is CLK12 - */ -#define CONFIG_SYS_CMXSCR_VALUE (CMXSCR_RS1CS_CLK11 |\ - CMXSCR_TS1CS_CLK12) - -#elif defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 2) -/* - * Attention: this is board-specific - * - Rx-CLK is CLK13 - * - Tx-CLK is CLK14 - * - Select bus for bd/buffers (see 28-13) - * - Enable Full Duplex in FSMR - */ -#define CONFIG_SYS_CMXFCR_MASK2 (CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK) -#define CONFIG_SYS_CMXFCR_VALUE2 (CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14) -#define CONFIG_SYS_CPMFCR_RAMTYPE 0 -#define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB) -#endif /* CONFIG_ETHER_INDEX */ - -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_FLASH0_BASE -#define CONFIG_SYS_FLASH_SIZE CONFIG_SYS_FLASH0_SIZE -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_SDRAM0_BASE -#define CONFIG_SYS_SDRAM_SIZE (CONFIG_SYS_SDRAM0_SIZE + CONFIG_SYS_SDRAM1_SIZE) - -/*----------------------------------------------------------------------- - * Hard Reset Configuration Words - */ -#if defined(CONFIG_SYS_PPMC_BOOT_LOW) -# define CONFIG_SYS_PPMC_HRCW_BOOT_FLAGS (HRCW_CIP | HRCW_BMS) -#else -# define CONFIG_SYS_PPMC_HRCW_BOOT_FLAGS (0) -#endif /* defined(CONFIG_SYS_PPMC_BOOT_LOW) */ - -/* get the HRCW ISB field from CONFIG_SYS_IMMR */ -#define CONFIG_SYS_PPMC_HRCW_IMMR ( ((CONFIG_SYS_IMMR & 0x10000000) >> 10) | \ - ((CONFIG_SYS_IMMR & 0x01000000) >> 7) | \ - ((CONFIG_SYS_IMMR & 0x00100000) >> 4) ) - -#define CONFIG_SYS_HRCW_MASTER ( HRCW_EBM | \ - HRCW_BPS11 | \ - HRCW_L2CPC10 | \ - HRCW_DPPC00 | \ - CONFIG_SYS_PPMC_HRCW_IMMR | \ - HRCW_MMR00 | \ - HRCW_LBPC00 | \ - HRCW_APPC10 | \ - HRCW_CS10PC00 | \ - (CONFIG_SYS_PPMC_MODCK_H & HRCW_MODCK_H1111) | \ - CONFIG_SYS_PPMC_HRCW_BOOT_FLAGS ) - -/* no slaves */ -#define CONFIG_SYS_HRCW_SLAVE1 0 -#define CONFIG_SYS_HRCW_SLAVE2 0 -#define CONFIG_SYS_HRCW_SLAVE3 0 -#define CONFIG_SYS_HRCW_SLAVE4 0 -#define CONFIG_SYS_HRCW_SLAVE5 0 -#define CONFIG_SYS_HRCW_SLAVE6 0 -#define CONFIG_SYS_HRCW_SLAVE7 0 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - * Note also that the logic that sets CONFIG_SYS_RAMBOOT is platform dependent. - */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH0_BASE - -#ifndef CONFIG_SYS_MONITOR_BASE -#define CONFIG_SYS_MONITOR_BASE 0x0ff80000 -#endif - -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -# define CONFIG_SYS_RAMBOOT -#endif - -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 374 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ - -#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */ -#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_FLASH_INCREMENT 0 /* there is only one bank */ -#define CONFIG_SYS_FLASH_PROTECTION 1 /* use hardware protection */ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ - - -#ifndef CONFIG_SYS_RAMBOOT - -# define CONFIG_ENV_IS_IN_FLASH 1 -# ifdef CONFIG_ENV_IN_OWN_SECT -# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x40000) -# define CONFIG_ENV_SECT_SIZE 0x40000 -# else -# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN - CONFIG_ENV_SECT_SIZE) -# define CONFIG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */ -# define CONFIG_ENV_SECT_SIZE 0x40000 /* see README - env sect real size */ -# endif /* CONFIG_ENV_IN_OWN_SECT */ - -#else -# define CONFIG_ENV_IS_IN_FLASH 1 -# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x40000) -#define CONFIG_ENV_SIZE 0x1000 -# define CONFIG_ENV_SECT_SIZE 0x40000 -#endif /* CONFIG_SYS_RAMBOOT */ - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8260 CPU */ - -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * HIDx - Hardware Implementation-dependent Registers 2-11 - *----------------------------------------------------------------------- - * HID0 also contains cache control - initially enable both caches and - * invalidate contents, then the final state leaves only the instruction - * cache enabled. Note that Power-On and Hard reset invalidate the caches, - * but Soft reset does not. - * - * HID1 has only read-only information - nothing to set. - */ -#define CONFIG_SYS_HID0_INIT (HID0_ICE |\ - HID0_DCE |\ - HID0_ICFI |\ - HID0_DCI |\ - HID0_IFEM |\ - HID0_ABE) - -#define CONFIG_SYS_HID0_FINAL (HID0_ICE |\ - HID0_IFEM |\ - HID0_ABE |\ - HID0_EMCP) -#define CONFIG_SYS_HID2 0 - -/*----------------------------------------------------------------------- - * RMR - Reset Mode Register - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_RMR 0 - -/*----------------------------------------------------------------------- - * BCR - Bus Configuration 4-25 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_BCR (BCR_EBM |\ - 0x30000000) - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 4-31 - * Ref Section 4.3.2.6 page 4-31 - *----------------------------------------------------------------------- - */ - -#define CONFIG_SYS_SIUMCR (SIUMCR_ESE |\ - SIUMCR_DPPC00 |\ - SIUMCR_L2CPC10 |\ - SIUMCR_LBPC00 |\ - SIUMCR_APPC10 |\ - SIUMCR_CS10PC00 |\ - SIUMCR_BCTLC00 |\ - SIUMCR_MMR00) - - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 11-9 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable - */ -#define CONFIG_SYS_SYPCR (SYPCR_SWTC |\ - SYPCR_BMT |\ - SYPCR_PBME |\ - SYPCR_LBME |\ - SYPCR_SWRI |\ - SYPCR_SWP) - -/*----------------------------------------------------------------------- - * TMCNTSC - Time Counter Status and Control 4-40 - *----------------------------------------------------------------------- - * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk, - * and enable Time Counter - */ -#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC |\ - TMCNTSC_ALR |\ - TMCNTSC_TCF |\ - TMCNTSC_TCE) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 4-42 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable - * Periodic timer - */ -#define CONFIG_SYS_PISCR (PISCR_PS |\ - PISCR_PTF |\ - PISCR_PTE) - -/*----------------------------------------------------------------------- - * SCCR - System Clock Control 9-8 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_SCCR 0 - -/*----------------------------------------------------------------------- - * RCCR - RISC Controller Configuration 13-7 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_RCCR 0 - -/* - * Initialize Memory Controller: - * - * Bank Bus Machine PortSz Device - * ---- --- ------- ------ ------ - * 0 60x GPCM 32 bit FLASH (SIMM - 32MB) * - * 1 unused - * 2 60x SDRAM 64 bit SDRAM (DIMM - 128MB) - * 3 60x SDRAM 64 bit SDRAM (DIMM - 128MB) - * 4 Local SDRAM 32 bit SDRAM (on board - 16MB) - * 5 60x GPCM 8 bit Mailbox/EEPROM (8KB) - * 6 60x GPCM 8 bit FLASH (on board - 2MB) * - * 7 60x GPCM 8 bit LEDs, switches - * - * (*) This configuration requires the PPMC8260 be configured - * so that *CS0 goes to the FLASH SIMM, and *CS6 goes to - * the on board FLASH. In other words, JP24 should have - * pins 1 and 2 jumpered and pins 3 and 4 jumpered. - * - */ - -/*----------------------------------------------------------------------- - * BR0,BR1 - Base Register - * Ref: Section 10.3.1 on page 10-14 - * OR0,OR1 - Option Register - * Ref: Section 10.3.2 on page 10-18 - *----------------------------------------------------------------------- - */ - -/* Bank 0,1 - FLASH SIMM - * - * This expects the FLASH SIMM to be connected to *CS0 - * It consists of 4 AM29F080B parts. - * - * Note: For the 4 MB SIMM, *CS1 is unused. - */ - -/* BR0 is configured as follows: - * - * - Base address of 0xFE000000 - * - 32 bit port size - * - Data errors checking is disabled - * - Read and write access - * - GPCM 60x bus - * - Access are handled by the memory controller according to MSEL - * - Not used for atomic operations - * - No data pipelining is done - * - Valid - */ -#define CONFIG_SYS_BR0_PRELIM ((CONFIG_SYS_FLASH0_BASE & BRx_BA_MSK) |\ - BRx_PS_32 |\ - BRx_MS_GPCM_P |\ - BRx_V) - -/* OR0 is configured as follows: - * - * - 32 MB - * - *BCTL0 is asserted upon access to the current memory bank - * - *CW / *WE are negated a quarter of a clock earlier - * - *CS is output at the same time as the address lines - * - Uses a clock cycle length of 5 - * - *PSDVAL is generated internally by the memory controller - * unless *GTA is asserted earlier externally. - * - Relaxed timing is generated by the GPCM for accesses - * initiated to this memory region. - * - One idle clock is inserted between a read access from the - * current bank and the next access. - */ -#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH0_SIZE) |\ - ORxG_CSNT |\ - ORxG_ACS_DIV1 |\ - ORxG_SCY_5_CLK |\ - ORxG_TRLX |\ - ORxG_EHTR) - -/*----------------------------------------------------------------------- - * BR2,BR3 - Base Register - * Ref: Section 10.3.1 on page 10-14 - * OR2,OR3 - Option Register - * Ref: Section 10.3.2 on page 10-16 - *----------------------------------------------------------------------- - */ - -/* - * Bank 2,3 - 128 MB SDRAM DIMM - */ - -/* With a 128 MB DIMM, the BR2 is configured as follows: - * - * - Base address of 0x00000000/0x08000000 - * - 64 bit port size (60x bus only) - * - Data errors checking is disabled - * - Read and write access - * - SDRAM 60x bus - * - Access are handled by the memory controller according to MSEL - * - Not used for atomic operations - * - No data pipelining is done - * - Valid - */ -#define CONFIG_SYS_BR2_PRELIM ((CONFIG_SYS_SDRAM0_BASE & BRx_BA_MSK) |\ - BRx_PS_64 |\ - BRx_MS_SDRAM_P |\ - BRx_V) - -#define CONFIG_SYS_BR3_PRELIM ((CONFIG_SYS_SDRAM1_BASE & BRx_BA_MSK) |\ - BRx_PS_64 |\ - BRx_MS_SDRAM_P |\ - BRx_V) - -/* With a 128 MB DIMM, the OR2 is configured as follows: - * - * - 128 MB - * - 4 internal banks per device - * - Row start address bit is A8 with PSDMR[PBI] = 0 - * - 13 row address lines - * - Back-to-back page mode - * - Internal bank interleaving within save device enabled - */ - -#define CONFIG_SYS_OR2_PRELIM (MEG_TO_AM(CONFIG_SYS_SDRAM0_SIZE) |\ - ORxS_BPD_4 |\ - ORxS_ROWST_PBI0_A7 |\ - ORxS_NUMR_13) - -#define CONFIG_SYS_OR3_PRELIM (MEG_TO_AM(CONFIG_SYS_SDRAM1_SIZE) |\ - ORxS_BPD_4 |\ - ORxS_ROWST_PBI0_A7 |\ - ORxS_NUMR_13) - - -/*----------------------------------------------------------------------- - * PSDMR - 60x Bus SDRAM Mode Register - * Ref: Section 10.3.3 on page 10-21 - *----------------------------------------------------------------------- - */ - -/* With a 128 MB DIMM, the PSDMR is configured as follows: - * - * - Page Based Interleaving, - * - Refresh Enable, - * - Normal Operation - * - Address Multiplexing where A5 is output on A14 pin - * (A6 on A15, and so on), - * - use address pins A13-A15 as bank select, - * - A9 is output on SDA10 during an ACTIVATE command, - * - earliest timing for ACTIVATE command after REFRESH command is 7 clocks, - * - earliest timing for ACTIVATE or REFRESH command after PRECHARGE command - * is 3 clocks, - * - earliest timing for READ/WRITE command after ACTIVATE command is - * 2 clocks, - * - earliest timing for PRECHARGE after last data was read is 1 clock, - * - earliest timing for PRECHARGE after last data was written is 1 clock, - * - External Address Multiplexing enabled - * - CAS Latency is 2. - */ -#define CONFIG_SYS_PSDMR (PSDMR_RFEN |\ - PSDMR_SDAM_A14_IS_A5 |\ - PSDMR_BSMA_A13_A15 |\ - PSDMR_SDA10_PBI0_A9 |\ - PSDMR_RFRC_7_CLK |\ - PSDMR_PRETOACT_3W |\ - PSDMR_ACTTORW_2W |\ - PSDMR_LDOTOPRE_1C |\ - PSDMR_WRC_1C |\ - PSDMR_EAMUX |\ - PSDMR_CL_2) - - -#define CONFIG_SYS_PSRT 0x0e -#define CONFIG_SYS_MPTPR MPTPR_PTP_DIV32 - - -/*----------------------------------------------------------------------- - * BR4 - Base Register - * Ref: Section 10.3.1 on page 10-14 - * OR4 - Option Register - * Ref: Section 10.3.2 on page 10-16 - *----------------------------------------------------------------------- - */ - -/* - * Bank 4 - On board SDRAM - * - */ -/* With 16 MB of onboard SDRAM BR4 is configured as follows - * - * - Base address 0x38000000 - * - 32 bit port size - * - Data error checking disabled - * - Read/Write access - * - SDRAM local bus - * - Not used for atomic operations - * - No data pipelining is done - * - Valid - * - */ - -#define CONFIG_SYS_BR4_PRELIM ((CONFIG_SYS_SDRAM2_BASE & BRx_BA_MSK) |\ - BRx_PS_32 |\ - BRx_DECC_NONE |\ - BRx_MS_SDRAM_L |\ - BRx_V) - -/* - * With 16MB SDRAM, OR4 is configured as follows - * - 4 internal banks per device - * - Row start address bit is A10 with LSDMR[PBI] = 0 - * - 12 row address lines - * - Back-to-back page mode - * - Internal bank interleaving within save device enabled - */ - -#define CONFIG_SYS_OR4_PRELIM (MEG_TO_AM(CONFIG_SYS_SDRAM2_SIZE) |\ - ORxS_BPD_4 |\ - ORxS_ROWST_PBI0_A10 |\ - ORxS_NUMR_12) - - -/*----------------------------------------------------------------------- - * LSDMR - Local Bus SDRAM Mode Register - * Ref: Section 10.3.4 on page 10-24 - *----------------------------------------------------------------------- - */ - -/* With a 16 MB onboard SDRAM, the LSDMR is configured as follows: - * - * - Page Based Interleaving, - * - Refresh Enable, - * - Normal Operation - * - Address Multiplexing where A5 is output on A13 pin - * (A6 on A15, and so on), - * - use address pins A15-A17 as bank select, - * - A11 is output on SDA10 during an ACTIVATE command, - * - earliest timing for ACTIVATE command after REFRESH command is 7 clocks, - * - earliest timing for ACTIVATE or REFRESH command after PRECHARGE command - * is 2 clocks, - * - earliest timing for READ/WRITE command after ACTIVATE command is - * 2 clocks, - * - SDRAM burst length is 8 - * - earliest timing for PRECHARGE after last data was read is 1 clock, - * - earliest timing for PRECHARGE after last data was written is 1 clock, - * - External Address Multiplexing disabled - * - CAS Latency is 2. - */ -#define CONFIG_SYS_LSDMR (PSDMR_RFEN |\ - PSDMR_SDAM_A13_IS_A5 |\ - PSDMR_BSMA_A15_A17 |\ - PSDMR_SDA10_PBI0_A11 |\ - PSDMR_RFRC_7_CLK |\ - PSDMR_PRETOACT_2W |\ - PSDMR_ACTTORW_2W |\ - PSDMR_BL |\ - PSDMR_LDOTOPRE_1C |\ - PSDMR_WRC_1C |\ - PSDMR_CL_2) - -#define CONFIG_SYS_LSRT 0x0e - -/*----------------------------------------------------------------------- - * BR5 - Base Register - * Ref: Section 10.3.1 on page 10-14 - * OR5 - Option Register - * Ref: Section 10.3.2 on page 10-16 - *----------------------------------------------------------------------- - */ - -/* - * Bank 5 EEProm and Mailbox - * - * The EEPROM and mailbox live on the same chip select. - * the eeprom is selected if the MSb of the address is set and the mailbox is - * selected if the MSb of the address is clear. - * - */ - -/* BR5 is configured as follows: - * - * - Base address of 0x32000000/0xF2000000 - * - 8 bit - * - Data error checking disabled - * - Read/Write access - * - GPCM 60x Bus - * - SDRAM local bus - * - No data pipelining is done - * - Valid - */ - -#define CONFIG_SYS_BR5_PRELIM ((CONFIG_SYS_MAILBOX_BASE & BRx_BA_MSK) |\ - BRx_PS_8 |\ - BRx_DECC_NONE |\ - BRx_MS_GPCM_P |\ - BRx_V) -/* OR5 is configured as follows - * - buffer control enabled - * - chip select negated normally - * - CS output 1/2 clock after address - * - 15 wait states - * - *PSDVAL is generated internally by the memory controller - * unless *GTA is asserted earlier externally. - * - Relaxed timing is generated by the GPCM for accesses - * initiated to this memory region. - * - One idle clock is inserted between a read access from the - * current bank and the next access. - */ - -#define CONFIG_SYS_OR5_PRELIM ((P2SZ_TO_AM(CONFIG_SYS_MAILBOX_SIZE) & ~0x80000000) |\ - ORxG_ACS_DIV2 |\ - ORxG_SCY_15_CLK |\ - ORxG_TRLX |\ - ORxG_EHTR) - -/*----------------------------------------------------------------------- - * BR6 - Base Register - * Ref: Section 10.3.1 on page 10-14 - * OR6 - Option Register - * Ref: Section 10.3.2 on page 10-18 - *----------------------------------------------------------------------- - */ - -/* Bank 6 - I/O select - * - */ - -/* BR6 is configured as follows: - * - * - Base address of 0xE0000000 - * - 16 bit port size - * - Data errors checking is disabled - * - Read and write access - * - GPCM 60x bus - * - Access are handled by the memory controller according to MSEL - * - Not used for atomic operations - * - No data pipelining is done - * - Valid - */ -#define CONFIG_SYS_BR6_PRELIM ((CONFIG_SYS_IOSELECT_BASE & BRx_BA_MSK) |\ - BRx_PS_16 |\ - BRx_MS_GPCM_P |\ - BRx_V) - -/* OR6 is configured as follows - * - buffer control enabled - * - chip select negated normally - * - CS output 1/2 clock after address - * - 15 wait states - * - *PSDVAL is generated internally by the memory controller - * unless *GTA is asserted earlier externally. - * - Relaxed timing is generated by the GPCM for accesses - * initiated to this memory region. - * - One idle clock is inserted between a read access from the - * current bank and the next access. - */ - -#define CONFIG_SYS_OR6_PRELIM (MEG_TO_AM(CONFIG_SYS_IOSELECT_SIZE) |\ - ORxG_ACS_DIV2 |\ - ORxG_SCY_15_CLK |\ - ORxG_TRLX |\ - ORxG_EHTR) - - -/*----------------------------------------------------------------------- - * BR7 - Base Register - * Ref: Section 10.3.1 on page 10-14 - * OR7 - Option Register - * Ref: Section 10.3.2 on page 10-18 - *----------------------------------------------------------------------- - */ - -/* Bank 7 - LEDs and switches - * - * LEDs are at 0x00001 (write only) - * switches are at 0x00001 (read only) - */ -#ifdef CONFIG_SYS_LED_BASE - -/* BR7 is configured as follows: - * - * - Base address of 0xA0000000 - * - 8 bit port size - * - Data errors checking is disabled - * - Read and write access - * - GPCM 60x bus - * - Access are handled by the memory controller according to MSEL - * - Not used for atomic operations - * - No data pipelining is done - * - Valid - */ -#define CONFIG_SYS_BR7_PRELIM ((CONFIG_SYS_LED_BASE & BRx_BA_MSK) |\ - BRx_PS_8 |\ - BRx_DECC_NONE |\ - BRx_MS_GPCM_P |\ - BRx_V) - -/* OR7 is configured as follows: - * - * - 1 byte - * - *BCTL0 is asserted upon access to the current memory bank - * - *CW / *WE are negated a quarter of a clock earlier - * - *CS is output@the same time as the address lines - * - Uses a clock cycle length of 15 - * - *PSDVAL is generated internally by the memory controller - * unless *GTA is asserted earlier externally. - * - Relaxed timing is generated by the GPCM for accesses - * initiated to this memory region. - * - One idle clock is inserted between a read access from the - * current bank and the next access. - */ -#define CONFIG_SYS_OR7_PRELIM (ORxG_AM_MSK |\ - ORxG_CSNT |\ - ORxG_ACS_DIV1 |\ - ORxG_SCY_15_CLK |\ - ORxG_TRLX |\ - ORxG_EHTR) -#endif /* CONFIG_SYS_LED_BASE */ -#endif /* __CONFIG_H */ -- 1.9.1