From mboxrd@z Thu Jan 1 00:00:00 1970 From: Alim Akhtar Subject: [PATCH v3 2/4] mmc: dw_mmc: exynos: support eMMC's HS400 mode Date: Wed, 31 Dec 2014 12:13:03 +0530 Message-ID: <1420008185-24758-3-git-send-email-alim.akhtar@samsung.com> References: <1420008185-24758-1-git-send-email-alim.akhtar@samsung.com> Return-path: In-reply-to: <1420008185-24758-1-git-send-email-alim.akhtar@samsung.com> Sender: linux-mmc-owner@vger.kernel.org To: linux-mmc@vger.kernel.org Cc: chris@printf.net, ulf.hansson@linaro.org, jh80.chung@samsung.com, tgih.jun@samsung.com, dianders@chromium.org, alim.akhtar@gmail.com, kgene@kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-samsung-soc@vger.kernel.org, a.kesavan@samsung.com List-Id: devicetree@vger.kernel.org From: Seungwon Jeon Implements HS400 support for exynos host driver. And this patch includes some updates as new mode is added. Signed-off-by: Seungwon Jeon Signed-off-by: Alim Akhtar --- .../devicetree/bindings/mmc/exynos-dw-mshc.txt | 6 + drivers/mmc/host/dw_mmc-exynos.c | 177 +++++++++++++++----- drivers/mmc/host/dw_mmc-exynos.h | 17 +- drivers/mmc/host/dw_mmc.c | 16 +- drivers/mmc/host/dw_mmc.h | 2 + 5 files changed, 178 insertions(+), 40 deletions(-) diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt index 06455de..be30c94 100644 --- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt @@ -34,6 +34,7 @@ Required Properties: valid values. * samsung,dw-mshc-hs200-timing: Similar with dw-mshc-sdr-timing. +* samsung,dw-mshc-hs400-timing: Similar with dw-mshc-ddr-timing. Notes for the sdr-timing and ddr-timing values: @@ -51,6 +52,9 @@ Required Properties: - if CIU clock divider value is 0 (that is divide by 1), both tx and rx phase shift clocks should be 0. +* read-strobe-delay: RCLK (Data strobe) delay to control HS400 mode + (Latency value for delay line in Read path) + Required properties for a slot (Deprecated - Recommend to use one slot per host): * gpios: specifies a list of gpios used for command, clock and data bus. The @@ -83,5 +87,7 @@ Example: samsung,dw-mshc-sdr-timing = <2 3 3>; samsung,dw-mshc-ddr-timing = <1 2 3>; samsung,dw-mshc-hs200-timing = <0 2 3>; + samsung,dw-mshc-hs400-timing = <0 2 1>; + read-strobe-delay = <90>; bus-width = <8>; }; diff --git a/drivers/mmc/host/dw_mmc-exynos.c b/drivers/mmc/host/dw_mmc-exynos.c index be6530e..d37a631 100644 --- a/drivers/mmc/host/dw_mmc-exynos.c +++ b/drivers/mmc/host/dw_mmc-exynos.c @@ -41,7 +41,12 @@ struct dw_mci_exynos_priv_data { u32 sdr_timing; u32 ddr_timing; u32 hs200_timing; + u32 hs400_timing; + u32 tuned_sample; u32 cur_speed; + u32 dqs_delay; + u32 saved_dqs_en; + u32 saved_strobe_ctrl; }; static struct dw_mci_exynos_compatible { @@ -101,6 +106,16 @@ static int dw_mci_exynos_priv_init(struct dw_mci *host) SDMMC_MPSCTRL_NON_SECURE_WRITE_BIT); } + if (priv->ctrl_type >= DW_MCI_TYPE_EXYNOS5420) { + priv->saved_strobe_ctrl = mci_readl(host, HS400_DLINE_CTRL); + priv->saved_dqs_en = mci_readl(host, HS400_DQS_EN); + priv->saved_dqs_en |= AXI_NON_BLOCKING_WR; + mci_writel(host, HS400_DQS_EN, priv->saved_dqs_en); + if (!priv->dqs_delay) + priv->dqs_delay = + DQS_CTRL_GET_RD_DELAY(priv->saved_strobe_ctrl); + } + priv->ciu_div = dw_mci_exynos_get_ciu_div(host); return 0; @@ -115,6 +130,25 @@ static int dw_mci_exynos_setup_clock(struct dw_mci *host) return 0; } +static void dw_mci_exynos_set_clksel_timing(struct dw_mci *host, u32 timing) +{ + struct dw_mci_exynos_priv_data *priv = host->priv; + u32 clksel; + + if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 || + priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU) + clksel = mci_readl(host, CLKSEL64); + else + clksel = mci_readl(host, CLKSEL); + + clksel = (clksel & ~SDMMC_CLKSEL_TIMING_MASK) | timing; + if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 || + priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU) + mci_writel(host, CLKSEL64, clksel); + else + mci_writel(host, CLKSEL, clksel); +} + #ifdef CONFIG_PM_SLEEP static int dw_mci_exynos_suspend(struct device *dev) { @@ -190,35 +224,37 @@ static void dw_mci_exynos_prepare_command(struct dw_mci *host, u32 *cmdr) } } -static void dw_mci_exynos_set_ios(struct dw_mci *host, struct mmc_ios *ios) +static void dw_mci_exynos_config_hs400(struct dw_mci *host, u32 timing) { struct dw_mci_exynos_priv_data *priv = host->priv; - unsigned int wanted = ios->clock; - unsigned long actual; + u32 dqs, strobe; - if (ios->timing == MMC_TIMING_MMC_HS200) { - if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 || - priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU) - mci_writel(host, CLKSEL64, priv->hs200_timing); - else - mci_writel(host, CLKSEL, priv->hs200_timing); - } else if (ios->timing == MMC_TIMING_MMC_DDR52) { - if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 || - priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU) - mci_writel(host, CLKSEL64, priv->ddr_timing); - else - mci_writel(host, CLKSEL, priv->ddr_timing); - /* Should be double rate for DDR mode */ - if (ios->bus_width == MMC_BUS_WIDTH_8) - wanted <<= 1; + /* + * Exynos5420 and above controller supports HS400 mode + */ + if (priv->ctrl_type < DW_MCI_TYPE_EXYNOS5420) + return; + + dqs = priv->saved_dqs_en; + strobe = priv->saved_strobe_ctrl; + + if (timing == MMC_TIMING_MMC_HS400) { + dqs |= DATA_STROBE_EN; + strobe = DQS_CTRL_RD_DELAY(strobe, priv->dqs_delay); } else { - if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 || - priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU) - mci_writel(host, CLKSEL64, priv->sdr_timing); - else - mci_writel(host, CLKSEL, priv->sdr_timing); + dqs &= ~DATA_STROBE_EN; } + mci_writel(host, HS400_DQS_EN, dqs); + mci_writel(host, HS400_DLINE_CTRL, strobe); +} + +static void dw_mci_exynos_adjust_clock(struct dw_mci *host, unsigned int wanted) +{ + struct dw_mci_exynos_priv_data *priv = host->priv; + unsigned long actual; + u8 div; + int ret; /* * Don't care if wanted clock is zero or * ciu clock is unavailable @@ -230,18 +266,55 @@ static void dw_mci_exynos_set_ios(struct dw_mci *host, struct mmc_ios *ios) if (wanted < EXYNOS_CCLKIN_MIN) wanted = EXYNOS_CCLKIN_MIN; - if (wanted != priv->cur_speed) { - u8 div = dw_mci_exynos_get_ciu_div(host); - int ret = clk_set_rate(host->ciu_clk, wanted * div); - if (ret) - dev_warn(host->dev, - "failed to set clk-rate %u error: %d\n", - wanted * div, ret); - actual = clk_get_rate(host->ciu_clk); - host->bus_hz = actual / div; - priv->cur_speed = wanted; - host->current_speed = 0; + if (wanted == priv->cur_speed) + return; + + div = dw_mci_exynos_get_ciu_div(host); + ret = clk_set_rate(host->ciu_clk, wanted * div); + if (ret) + dev_warn(host->dev, + "failed to set clk-rate %u error: %d\n", + wanted * div, ret); + actual = clk_get_rate(host->ciu_clk); + host->bus_hz = actual / div; + priv->cur_speed = wanted; + host->current_speed = 0; +} + +static void dw_mci_exynos_set_ios(struct dw_mci *host, struct mmc_ios *ios) +{ + struct dw_mci_exynos_priv_data *priv = host->priv; + unsigned int wanted = ios->clock; + u32 timing = ios->timing, clksel; + + switch (timing) { + case MMC_TIMING_MMC_HS400: + /* Update tuned sample timing */ + clksel = SDMMC_CLKSEL_UP_SAMPLE( + priv->hs400_timing, priv->tuned_sample); + wanted <<= 1; + break; + case MMC_TIMING_MMC_HS200: + clksel = priv->hs200_timing; + break; + case MMC_TIMING_MMC_DDR52: + clksel = priv->ddr_timing; + /* Should be double rate for DDR mode */ + if (ios->bus_width == MMC_BUS_WIDTH_8) + wanted <<= 1; + break; + default: + clksel = priv->sdr_timing; } + + /* Set clock timing for the requested speed mode*/ + dw_mci_exynos_set_clksel_timing(host, clksel); + + /* Configure setting for HS400 */ + dw_mci_exynos_config_hs400(host, timing); + + /* Configure clock rate */ + dw_mci_exynos_adjust_clock(host, wanted); } static int dw_mci_exynos_dt_populate_timing(struct dw_mci *host, @@ -294,6 +367,14 @@ static int dw_mci_exynos_parse_dt(struct dw_mci *host) dw_mci_exynos_dt_populate_timing(host, priv->ctrl_type, "samsung,dw-mshc-hs200-timing", &priv->hs200_timing); + + ret = dw_mci_exynos_dt_populate_timing(host, priv->ctrl_type, + "samsung,dw-mshc-hs400-timing", &priv->hs400_timing); + if (!ret && of_property_read_u32(np, + "read-strobe-delay", &priv->dqs_delay)) + dev_info(host->dev, + "read-strobe-delay is not found, assuming usage of default value\n"); + host->priv = priv; return 0; @@ -320,7 +401,9 @@ static inline void dw_mci_exynos_set_clksmpl(struct dw_mci *host, u8 sample) clksel = mci_readl(host, CLKSEL64); else clksel = mci_readl(host, CLKSEL); - clksel = (clksel & ~0x7) | SDMMC_CLKSEL_CCLK_SAMPLE(sample); + + clksel = SDMMC_CLKSEL_UP_SAMPLE(clksel, sample); + if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 || priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU) mci_writel(host, CLKSEL64, clksel); @@ -339,13 +422,16 @@ static inline u8 dw_mci_exynos_move_next_clksmpl(struct dw_mci *host) clksel = mci_readl(host, CLKSEL64); else clksel = mci_readl(host, CLKSEL); + sample = (clksel + 1) & 0x7; - clksel = (clksel & ~0x7) | sample; + clksel = SDMMC_CLKSEL_UP_SAMPLE(clksel, sample); + if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 || priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU) mci_writel(host, CLKSEL64, clksel); else mci_writel(host, CLKSEL, clksel); + return sample; } @@ -378,6 +464,7 @@ out: static int dw_mci_exynos_execute_tuning(struct dw_mci_slot *slot) { struct dw_mci *host = slot->host; + struct dw_mci_exynos_priv_data *priv = host->priv; struct mmc_host *mmc = slot->mmc; u8 start_smpl, smpl, candiates = 0; s8 found = -1; @@ -395,14 +482,27 @@ static int dw_mci_exynos_execute_tuning(struct dw_mci_slot *slot) } while (start_smpl != smpl); found = dw_mci_exynos_get_best_clksmpl(candiates); - if (found >= 0) + if (found >= 0) { dw_mci_exynos_set_clksmpl(host, found); - else + priv->tuned_sample = found; + } else { ret = -EIO; + } return ret; } +int dw_mci_exynos_prepare_hs400_tuning(struct dw_mci *host, + struct mmc_ios *ios) +{ + struct dw_mci_exynos_priv_data *priv = host->priv; + + dw_mci_exynos_set_clksel_timing(host, priv->hs400_timing); + dw_mci_exynos_adjust_clock(host, (ios->clock) << 1); + + return 0; +} + /* Common capabilities of Exynos4/Exynos5 SoC */ static unsigned long exynos_dwmmc_caps[4] = { MMC_CAP_1_8V_DDR | MMC_CAP_8_BIT_DATA | MMC_CAP_CMD23, @@ -419,6 +519,7 @@ static const struct dw_mci_drv_data exynos_drv_data = { .set_ios = dw_mci_exynos_set_ios, .parse_dt = dw_mci_exynos_parse_dt, .execute_tuning = dw_mci_exynos_execute_tuning, + .prepare_hs400_tuning = dw_mci_exynos_prepare_hs400_tuning, }; static const struct of_device_id dw_mci_exynos_match[] = { diff --git a/drivers/mmc/host/dw_mmc-exynos.h b/drivers/mmc/host/dw_mmc-exynos.h index c04ecef..e7faffe 100644 --- a/drivers/mmc/host/dw_mmc-exynos.h +++ b/drivers/mmc/host/dw_mmc-exynos.h @@ -12,21 +12,36 @@ #ifndef _DW_MMC_EXYNOS_H_ #define _DW_MMC_EXYNOS_H_ -/* Extended Register's Offset */ #define SDMMC_CLKSEL 0x09C #define SDMMC_CLKSEL64 0x0A8 +/* Extended Register's Offset */ +#define SDMMC_HS400_DQS_EN 0x180 +#define SDMMC_HS400_ASYNC_FIFO_CTRL 0x184 +#define SDMMC_HS400_DLINE_CTRL 0x188 + /* CLKSEL register defines */ #define SDMMC_CLKSEL_CCLK_SAMPLE(x) (((x) & 7) << 0) #define SDMMC_CLKSEL_CCLK_DRIVE(x) (((x) & 7) << 16) #define SDMMC_CLKSEL_CCLK_DIVIDER(x) (((x) & 7) << 24) #define SDMMC_CLKSEL_GET_DRV_WD3(x) (((x) >> 16) & 0x7) #define SDMMC_CLKSEL_GET_DIV(x) (((x) >> 24) & 0x7) +#define SDMMC_CLKSEL_UP_SAMPLE(x, y) (((x) & ~SDMMC_CLKSEL_CCLK_SAMPLE(7)) |\ + SDMMC_CLKSEL_CCLK_SAMPLE(y)) #define SDMMC_CLKSEL_TIMING(x, y, z) (SDMMC_CLKSEL_CCLK_SAMPLE(x) | \ SDMMC_CLKSEL_CCLK_DRIVE(y) | \ SDMMC_CLKSEL_CCLK_DIVIDER(z)) +#define SDMMC_CLKSEL_TIMING_MASK SDMMC_CLKSEL_TIMING(0x7, 0x7, 0x7) #define SDMMC_CLKSEL_WAKEUP_INT BIT(11) +/* HS400 control defines */ +#define DATA_STROBE_EN BIT(0) +#define AXI_NON_BLOCKING_WR BIT(7) + +/* Delay Line Control defines */ +#define DQS_CTRL_RD_DELAY(x, y) (((x) & ~0x3FF) | ((y) & 0x3FF)) +#define DQS_CTRL_GET_RD_DELAY(x) ((x) & 0x3FF) + /* Protector Register */ #define SDMMC_EMMCP_BASE 0x1000 #define SDMMC_MPSECURITY (SDMMC_EMMCP_BASE + 0x0010) diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 2e8abc8..43a3a5b 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -1084,7 +1084,8 @@ static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) regs = mci_readl(slot->host, UHS_REG); /* DDR mode set */ - if (ios->timing == MMC_TIMING_MMC_DDR52) + if (ios->timing == MMC_TIMING_MMC_DDR52 || + ios->timing == MMC_TIMING_MMC_HS400) regs |= ((0x1 << slot->id) << 16); else regs &= ~((0x1 << slot->id) << 16); @@ -1321,6 +1322,18 @@ static int dw_mci_execute_tuning(struct mmc_host *mmc, u32 opcode) return err; } +int dw_mci_prepare_hs400_tuning(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct dw_mci_slot *slot = mmc_priv(mmc); + struct dw_mci *host = slot->host; + const struct dw_mci_drv_data *drv_data = host->drv_data; + + if (drv_data && drv_data->prepare_hs400_tuning) + return drv_data->prepare_hs400_tuning(host, ios); + + return 0; +} + static const struct mmc_host_ops dw_mci_ops = { .request = dw_mci_request, .pre_req = dw_mci_pre_req, @@ -1333,6 +1346,7 @@ static const struct mmc_host_ops dw_mci_ops = { .card_busy = dw_mci_card_busy, .start_signal_voltage_switch = dw_mci_switch_voltage, .init_card = dw_mci_init_card, + .prepare_hs400_tuning = dw_mci_prepare_hs400_tuning, }; static void dw_mci_request_end(struct dw_mci *host, struct mmc_request *mrq) diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h index 18c4afe..d239867 100644 --- a/drivers/mmc/host/dw_mmc.h +++ b/drivers/mmc/host/dw_mmc.h @@ -271,5 +271,7 @@ struct dw_mci_drv_data { void (*set_ios)(struct dw_mci *host, struct mmc_ios *ios); int (*parse_dt)(struct dw_mci *host); int (*execute_tuning)(struct dw_mci_slot *slot); + int (*prepare_hs400_tuning)(struct dw_mci *host, + struct mmc_ios *ios); }; #endif /* _DW_MMC_H_ */ -- 1.7.9.5 From mboxrd@z Thu Jan 1 00:00:00 1970 From: alim.akhtar@samsung.com (Alim Akhtar) Date: Wed, 31 Dec 2014 12:13:03 +0530 Subject: [PATCH v3 2/4] mmc: dw_mmc: exynos: support eMMC's HS400 mode In-Reply-To: <1420008185-24758-1-git-send-email-alim.akhtar@samsung.com> References: <1420008185-24758-1-git-send-email-alim.akhtar@samsung.com> Message-ID: <1420008185-24758-3-git-send-email-alim.akhtar@samsung.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Seungwon Jeon Implements HS400 support for exynos host driver. And this patch includes some updates as new mode is added. Signed-off-by: Seungwon Jeon Signed-off-by: Alim Akhtar --- .../devicetree/bindings/mmc/exynos-dw-mshc.txt | 6 + drivers/mmc/host/dw_mmc-exynos.c | 177 +++++++++++++++----- drivers/mmc/host/dw_mmc-exynos.h | 17 +- drivers/mmc/host/dw_mmc.c | 16 +- drivers/mmc/host/dw_mmc.h | 2 + 5 files changed, 178 insertions(+), 40 deletions(-) diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt index 06455de..be30c94 100644 --- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt @@ -34,6 +34,7 @@ Required Properties: valid values. * samsung,dw-mshc-hs200-timing: Similar with dw-mshc-sdr-timing. +* samsung,dw-mshc-hs400-timing: Similar with dw-mshc-ddr-timing. Notes for the sdr-timing and ddr-timing values: @@ -51,6 +52,9 @@ Required Properties: - if CIU clock divider value is 0 (that is divide by 1), both tx and rx phase shift clocks should be 0. +* read-strobe-delay: RCLK (Data strobe) delay to control HS400 mode + (Latency value for delay line in Read path) + Required properties for a slot (Deprecated - Recommend to use one slot per host): * gpios: specifies a list of gpios used for command, clock and data bus. The @@ -83,5 +87,7 @@ Example: samsung,dw-mshc-sdr-timing = <2 3 3>; samsung,dw-mshc-ddr-timing = <1 2 3>; samsung,dw-mshc-hs200-timing = <0 2 3>; + samsung,dw-mshc-hs400-timing = <0 2 1>; + read-strobe-delay = <90>; bus-width = <8>; }; diff --git a/drivers/mmc/host/dw_mmc-exynos.c b/drivers/mmc/host/dw_mmc-exynos.c index be6530e..d37a631 100644 --- a/drivers/mmc/host/dw_mmc-exynos.c +++ b/drivers/mmc/host/dw_mmc-exynos.c @@ -41,7 +41,12 @@ struct dw_mci_exynos_priv_data { u32 sdr_timing; u32 ddr_timing; u32 hs200_timing; + u32 hs400_timing; + u32 tuned_sample; u32 cur_speed; + u32 dqs_delay; + u32 saved_dqs_en; + u32 saved_strobe_ctrl; }; static struct dw_mci_exynos_compatible { @@ -101,6 +106,16 @@ static int dw_mci_exynos_priv_init(struct dw_mci *host) SDMMC_MPSCTRL_NON_SECURE_WRITE_BIT); } + if (priv->ctrl_type >= DW_MCI_TYPE_EXYNOS5420) { + priv->saved_strobe_ctrl = mci_readl(host, HS400_DLINE_CTRL); + priv->saved_dqs_en = mci_readl(host, HS400_DQS_EN); + priv->saved_dqs_en |= AXI_NON_BLOCKING_WR; + mci_writel(host, HS400_DQS_EN, priv->saved_dqs_en); + if (!priv->dqs_delay) + priv->dqs_delay = + DQS_CTRL_GET_RD_DELAY(priv->saved_strobe_ctrl); + } + priv->ciu_div = dw_mci_exynos_get_ciu_div(host); return 0; @@ -115,6 +130,25 @@ static int dw_mci_exynos_setup_clock(struct dw_mci *host) return 0; } +static void dw_mci_exynos_set_clksel_timing(struct dw_mci *host, u32 timing) +{ + struct dw_mci_exynos_priv_data *priv = host->priv; + u32 clksel; + + if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 || + priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU) + clksel = mci_readl(host, CLKSEL64); + else + clksel = mci_readl(host, CLKSEL); + + clksel = (clksel & ~SDMMC_CLKSEL_TIMING_MASK) | timing; + if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 || + priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU) + mci_writel(host, CLKSEL64, clksel); + else + mci_writel(host, CLKSEL, clksel); +} + #ifdef CONFIG_PM_SLEEP static int dw_mci_exynos_suspend(struct device *dev) { @@ -190,35 +224,37 @@ static void dw_mci_exynos_prepare_command(struct dw_mci *host, u32 *cmdr) } } -static void dw_mci_exynos_set_ios(struct dw_mci *host, struct mmc_ios *ios) +static void dw_mci_exynos_config_hs400(struct dw_mci *host, u32 timing) { struct dw_mci_exynos_priv_data *priv = host->priv; - unsigned int wanted = ios->clock; - unsigned long actual; + u32 dqs, strobe; - if (ios->timing == MMC_TIMING_MMC_HS200) { - if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 || - priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU) - mci_writel(host, CLKSEL64, priv->hs200_timing); - else - mci_writel(host, CLKSEL, priv->hs200_timing); - } else if (ios->timing == MMC_TIMING_MMC_DDR52) { - if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 || - priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU) - mci_writel(host, CLKSEL64, priv->ddr_timing); - else - mci_writel(host, CLKSEL, priv->ddr_timing); - /* Should be double rate for DDR mode */ - if (ios->bus_width == MMC_BUS_WIDTH_8) - wanted <<= 1; + /* + * Exynos5420 and above controller supports HS400 mode + */ + if (priv->ctrl_type < DW_MCI_TYPE_EXYNOS5420) + return; + + dqs = priv->saved_dqs_en; + strobe = priv->saved_strobe_ctrl; + + if (timing == MMC_TIMING_MMC_HS400) { + dqs |= DATA_STROBE_EN; + strobe = DQS_CTRL_RD_DELAY(strobe, priv->dqs_delay); } else { - if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 || - priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU) - mci_writel(host, CLKSEL64, priv->sdr_timing); - else - mci_writel(host, CLKSEL, priv->sdr_timing); + dqs &= ~DATA_STROBE_EN; } + mci_writel(host, HS400_DQS_EN, dqs); + mci_writel(host, HS400_DLINE_CTRL, strobe); +} + +static void dw_mci_exynos_adjust_clock(struct dw_mci *host, unsigned int wanted) +{ + struct dw_mci_exynos_priv_data *priv = host->priv; + unsigned long actual; + u8 div; + int ret; /* * Don't care if wanted clock is zero or * ciu clock is unavailable @@ -230,18 +266,55 @@ static void dw_mci_exynos_set_ios(struct dw_mci *host, struct mmc_ios *ios) if (wanted < EXYNOS_CCLKIN_MIN) wanted = EXYNOS_CCLKIN_MIN; - if (wanted != priv->cur_speed) { - u8 div = dw_mci_exynos_get_ciu_div(host); - int ret = clk_set_rate(host->ciu_clk, wanted * div); - if (ret) - dev_warn(host->dev, - "failed to set clk-rate %u error: %d\n", - wanted * div, ret); - actual = clk_get_rate(host->ciu_clk); - host->bus_hz = actual / div; - priv->cur_speed = wanted; - host->current_speed = 0; + if (wanted == priv->cur_speed) + return; + + div = dw_mci_exynos_get_ciu_div(host); + ret = clk_set_rate(host->ciu_clk, wanted * div); + if (ret) + dev_warn(host->dev, + "failed to set clk-rate %u error: %d\n", + wanted * div, ret); + actual = clk_get_rate(host->ciu_clk); + host->bus_hz = actual / div; + priv->cur_speed = wanted; + host->current_speed = 0; +} + +static void dw_mci_exynos_set_ios(struct dw_mci *host, struct mmc_ios *ios) +{ + struct dw_mci_exynos_priv_data *priv = host->priv; + unsigned int wanted = ios->clock; + u32 timing = ios->timing, clksel; + + switch (timing) { + case MMC_TIMING_MMC_HS400: + /* Update tuned sample timing */ + clksel = SDMMC_CLKSEL_UP_SAMPLE( + priv->hs400_timing, priv->tuned_sample); + wanted <<= 1; + break; + case MMC_TIMING_MMC_HS200: + clksel = priv->hs200_timing; + break; + case MMC_TIMING_MMC_DDR52: + clksel = priv->ddr_timing; + /* Should be double rate for DDR mode */ + if (ios->bus_width == MMC_BUS_WIDTH_8) + wanted <<= 1; + break; + default: + clksel = priv->sdr_timing; } + + /* Set clock timing for the requested speed mode*/ + dw_mci_exynos_set_clksel_timing(host, clksel); + + /* Configure setting for HS400 */ + dw_mci_exynos_config_hs400(host, timing); + + /* Configure clock rate */ + dw_mci_exynos_adjust_clock(host, wanted); } static int dw_mci_exynos_dt_populate_timing(struct dw_mci *host, @@ -294,6 +367,14 @@ static int dw_mci_exynos_parse_dt(struct dw_mci *host) dw_mci_exynos_dt_populate_timing(host, priv->ctrl_type, "samsung,dw-mshc-hs200-timing", &priv->hs200_timing); + + ret = dw_mci_exynos_dt_populate_timing(host, priv->ctrl_type, + "samsung,dw-mshc-hs400-timing", &priv->hs400_timing); + if (!ret && of_property_read_u32(np, + "read-strobe-delay", &priv->dqs_delay)) + dev_info(host->dev, + "read-strobe-delay is not found, assuming usage of default value\n"); + host->priv = priv; return 0; @@ -320,7 +401,9 @@ static inline void dw_mci_exynos_set_clksmpl(struct dw_mci *host, u8 sample) clksel = mci_readl(host, CLKSEL64); else clksel = mci_readl(host, CLKSEL); - clksel = (clksel & ~0x7) | SDMMC_CLKSEL_CCLK_SAMPLE(sample); + + clksel = SDMMC_CLKSEL_UP_SAMPLE(clksel, sample); + if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 || priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU) mci_writel(host, CLKSEL64, clksel); @@ -339,13 +422,16 @@ static inline u8 dw_mci_exynos_move_next_clksmpl(struct dw_mci *host) clksel = mci_readl(host, CLKSEL64); else clksel = mci_readl(host, CLKSEL); + sample = (clksel + 1) & 0x7; - clksel = (clksel & ~0x7) | sample; + clksel = SDMMC_CLKSEL_UP_SAMPLE(clksel, sample); + if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 || priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU) mci_writel(host, CLKSEL64, clksel); else mci_writel(host, CLKSEL, clksel); + return sample; } @@ -378,6 +464,7 @@ out: static int dw_mci_exynos_execute_tuning(struct dw_mci_slot *slot) { struct dw_mci *host = slot->host; + struct dw_mci_exynos_priv_data *priv = host->priv; struct mmc_host *mmc = slot->mmc; u8 start_smpl, smpl, candiates = 0; s8 found = -1; @@ -395,14 +482,27 @@ static int dw_mci_exynos_execute_tuning(struct dw_mci_slot *slot) } while (start_smpl != smpl); found = dw_mci_exynos_get_best_clksmpl(candiates); - if (found >= 0) + if (found >= 0) { dw_mci_exynos_set_clksmpl(host, found); - else + priv->tuned_sample = found; + } else { ret = -EIO; + } return ret; } +int dw_mci_exynos_prepare_hs400_tuning(struct dw_mci *host, + struct mmc_ios *ios) +{ + struct dw_mci_exynos_priv_data *priv = host->priv; + + dw_mci_exynos_set_clksel_timing(host, priv->hs400_timing); + dw_mci_exynos_adjust_clock(host, (ios->clock) << 1); + + return 0; +} + /* Common capabilities of Exynos4/Exynos5 SoC */ static unsigned long exynos_dwmmc_caps[4] = { MMC_CAP_1_8V_DDR | MMC_CAP_8_BIT_DATA | MMC_CAP_CMD23, @@ -419,6 +519,7 @@ static const struct dw_mci_drv_data exynos_drv_data = { .set_ios = dw_mci_exynos_set_ios, .parse_dt = dw_mci_exynos_parse_dt, .execute_tuning = dw_mci_exynos_execute_tuning, + .prepare_hs400_tuning = dw_mci_exynos_prepare_hs400_tuning, }; static const struct of_device_id dw_mci_exynos_match[] = { diff --git a/drivers/mmc/host/dw_mmc-exynos.h b/drivers/mmc/host/dw_mmc-exynos.h index c04ecef..e7faffe 100644 --- a/drivers/mmc/host/dw_mmc-exynos.h +++ b/drivers/mmc/host/dw_mmc-exynos.h @@ -12,21 +12,36 @@ #ifndef _DW_MMC_EXYNOS_H_ #define _DW_MMC_EXYNOS_H_ -/* Extended Register's Offset */ #define SDMMC_CLKSEL 0x09C #define SDMMC_CLKSEL64 0x0A8 +/* Extended Register's Offset */ +#define SDMMC_HS400_DQS_EN 0x180 +#define SDMMC_HS400_ASYNC_FIFO_CTRL 0x184 +#define SDMMC_HS400_DLINE_CTRL 0x188 + /* CLKSEL register defines */ #define SDMMC_CLKSEL_CCLK_SAMPLE(x) (((x) & 7) << 0) #define SDMMC_CLKSEL_CCLK_DRIVE(x) (((x) & 7) << 16) #define SDMMC_CLKSEL_CCLK_DIVIDER(x) (((x) & 7) << 24) #define SDMMC_CLKSEL_GET_DRV_WD3(x) (((x) >> 16) & 0x7) #define SDMMC_CLKSEL_GET_DIV(x) (((x) >> 24) & 0x7) +#define SDMMC_CLKSEL_UP_SAMPLE(x, y) (((x) & ~SDMMC_CLKSEL_CCLK_SAMPLE(7)) |\ + SDMMC_CLKSEL_CCLK_SAMPLE(y)) #define SDMMC_CLKSEL_TIMING(x, y, z) (SDMMC_CLKSEL_CCLK_SAMPLE(x) | \ SDMMC_CLKSEL_CCLK_DRIVE(y) | \ SDMMC_CLKSEL_CCLK_DIVIDER(z)) +#define SDMMC_CLKSEL_TIMING_MASK SDMMC_CLKSEL_TIMING(0x7, 0x7, 0x7) #define SDMMC_CLKSEL_WAKEUP_INT BIT(11) +/* HS400 control defines */ +#define DATA_STROBE_EN BIT(0) +#define AXI_NON_BLOCKING_WR BIT(7) + +/* Delay Line Control defines */ +#define DQS_CTRL_RD_DELAY(x, y) (((x) & ~0x3FF) | ((y) & 0x3FF)) +#define DQS_CTRL_GET_RD_DELAY(x) ((x) & 0x3FF) + /* Protector Register */ #define SDMMC_EMMCP_BASE 0x1000 #define SDMMC_MPSECURITY (SDMMC_EMMCP_BASE + 0x0010) diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 2e8abc8..43a3a5b 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -1084,7 +1084,8 @@ static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) regs = mci_readl(slot->host, UHS_REG); /* DDR mode set */ - if (ios->timing == MMC_TIMING_MMC_DDR52) + if (ios->timing == MMC_TIMING_MMC_DDR52 || + ios->timing == MMC_TIMING_MMC_HS400) regs |= ((0x1 << slot->id) << 16); else regs &= ~((0x1 << slot->id) << 16); @@ -1321,6 +1322,18 @@ static int dw_mci_execute_tuning(struct mmc_host *mmc, u32 opcode) return err; } +int dw_mci_prepare_hs400_tuning(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct dw_mci_slot *slot = mmc_priv(mmc); + struct dw_mci *host = slot->host; + const struct dw_mci_drv_data *drv_data = host->drv_data; + + if (drv_data && drv_data->prepare_hs400_tuning) + return drv_data->prepare_hs400_tuning(host, ios); + + return 0; +} + static const struct mmc_host_ops dw_mci_ops = { .request = dw_mci_request, .pre_req = dw_mci_pre_req, @@ -1333,6 +1346,7 @@ static const struct mmc_host_ops dw_mci_ops = { .card_busy = dw_mci_card_busy, .start_signal_voltage_switch = dw_mci_switch_voltage, .init_card = dw_mci_init_card, + .prepare_hs400_tuning = dw_mci_prepare_hs400_tuning, }; static void dw_mci_request_end(struct dw_mci *host, struct mmc_request *mrq) diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h index 18c4afe..d239867 100644 --- a/drivers/mmc/host/dw_mmc.h +++ b/drivers/mmc/host/dw_mmc.h @@ -271,5 +271,7 @@ struct dw_mci_drv_data { void (*set_ios)(struct dw_mci *host, struct mmc_ios *ios); int (*parse_dt)(struct dw_mci *host); int (*execute_tuning)(struct dw_mci_slot *slot); + int (*prepare_hs400_tuning)(struct dw_mci *host, + struct mmc_ios *ios); }; #endif /* _DW_MMC_H_ */ -- 1.7.9.5