* [PATCH 11/11] powerpc/8xx: Add support for TASK_SIZE greater than 0x80000000
@ 2014-12-16 15:03 ` Christophe Leroy
0 siblings, 0 replies; 6+ messages in thread
From: Christophe Leroy @ 2014-12-16 15:03 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman, scottwood
Cc: linux-kernel, linuxppc-dev, Joakim Tjernlund
By default, TASK_SIZE is set to 0x80000000 for PPC_8xx, which is most likely
sufficient for most cases. However, kernel configuration allows to set TASK_SIZE
to another value, so the 8xx shall handle it.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
---
arch/powerpc/kernel/head_8xx.S | 29 +++++++++++++++++++++--------
1 file changed, 21 insertions(+), 8 deletions(-)
diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index dbe110e..d380658 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -48,6 +48,19 @@
mtspr spr, reg
#endif
+/* Macro to test if an address is a kernel address */
+#if CONFIG_TASK_SIZE <= 0x80000000
+#define IS_KERNEL(tmp, addr) \
+ andis. tmp, addr, 0x8000 /* Address >= 0x80000000 */
+#define BRANCH_UNLESS_KERNEL(label) beq label
+#else
+#define IS_KERNEL(tmp, addr) \
+ rlwinm tmp, addr, 16, 16, 31; \
+ cmpli cr0, tmp, PAGE_OFFSET >> 16
+#define BRANCH_UNLESS_KERNEL(label) blt label
+#endif
+
+
/*
* Value for the bits that have fixed value in RPN entries.
* Also used for tagging DAR for DTLBerror.
@@ -323,15 +336,15 @@ InstructionTLBMiss:
mfspr r10, SPRN_SRR0 /* Get effective address of fault */
DO_8xx_CPU15(r11, r10)
mfcr r3
- andis. r11, r10, 0x8000 /* Address >= 0x80000000 */
+ IS_KERNEL(r11, r10)
#else
mfspr r11, SPRN_SRR0 /* Get effective address of fault */
DO_8xx_CPU15(r10, r11)
mfcr r10
- andis. r11, r11, 0x8000 /* Address >= 0x80000000 */
+ IS_KERNEL(r11, r11)
#endif
mfspr r11, SPRN_M_TW /* Get level 1 table base address */
- beq 3f
+ BRANCH_UNLESS_KERNEL(3f)
lis r11, (swapper_pg_dir-PAGE_OFFSET)@ha
3:
#ifdef CONFIG_8xx_CPU6
@@ -390,14 +403,14 @@ DataStoreTLBMiss:
mtspr SPRN_SPRG_SCRATCH2, r3
mfcr r3
mfspr r10, SPRN_MD_EPN
- andis. r11, r10, 0x8000
+ IS_KERNEL(r11, r10)
#else
mfcr r10
mfspr r11, SPRN_MD_EPN
- andis. r11, r11, 0x8000
+ IS_KERNEL(r11, r11)
#endif
mfspr r11, SPRN_M_TW /* Get level 1 table base address */
- beq 3f
+ BRANCH_UNLESS_KERNEL(3f)
lis r11, (swapper_pg_dir-PAGE_OFFSET)@ha
3:
#ifdef CONFIG_8xx_CPU6
@@ -536,9 +549,9 @@ FixupDAR:/* Entry point for dcbx workaround. */
mtspr SPRN_SPRG_SCRATCH2, r10
/* fetch instruction from memory. */
mfspr r10, SPRN_SRR0
- andis. r11, r10, 0x8000 /* Address >= 0x80000000 */
+ IS_KERNEL(r11, r10)
mfspr r11, SPRN_M_TW /* Get level 1 table base address */
- beq 3f
+ BRANCH_UNLESS_KERNEL(3f)
lis r11, (swapper_pg_dir-PAGE_OFFSET)@ha
/* Insert level 1 index */
3: rlwimi r11, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29
--
2.1.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 11/11] powerpc/8xx: Add support for TASK_SIZE greater than 0x80000000
@ 2014-12-16 15:03 ` Christophe Leroy
0 siblings, 0 replies; 6+ messages in thread
From: Christophe Leroy @ 2014-12-16 15:03 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman, scottwood
Cc: linuxppc-dev, linux-kernel
By default, TASK_SIZE is set to 0x80000000 for PPC_8xx, which is most likely
sufficient for most cases. However, kernel configuration allows to set TASK_SIZE
to another value, so the 8xx shall handle it.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
---
arch/powerpc/kernel/head_8xx.S | 29 +++++++++++++++++++++--------
1 file changed, 21 insertions(+), 8 deletions(-)
diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index dbe110e..d380658 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -48,6 +48,19 @@
mtspr spr, reg
#endif
+/* Macro to test if an address is a kernel address */
+#if CONFIG_TASK_SIZE <= 0x80000000
+#define IS_KERNEL(tmp, addr) \
+ andis. tmp, addr, 0x8000 /* Address >= 0x80000000 */
+#define BRANCH_UNLESS_KERNEL(label) beq label
+#else
+#define IS_KERNEL(tmp, addr) \
+ rlwinm tmp, addr, 16, 16, 31; \
+ cmpli cr0, tmp, PAGE_OFFSET >> 16
+#define BRANCH_UNLESS_KERNEL(label) blt label
+#endif
+
+
/*
* Value for the bits that have fixed value in RPN entries.
* Also used for tagging DAR for DTLBerror.
@@ -323,15 +336,15 @@ InstructionTLBMiss:
mfspr r10, SPRN_SRR0 /* Get effective address of fault */
DO_8xx_CPU15(r11, r10)
mfcr r3
- andis. r11, r10, 0x8000 /* Address >= 0x80000000 */
+ IS_KERNEL(r11, r10)
#else
mfspr r11, SPRN_SRR0 /* Get effective address of fault */
DO_8xx_CPU15(r10, r11)
mfcr r10
- andis. r11, r11, 0x8000 /* Address >= 0x80000000 */
+ IS_KERNEL(r11, r11)
#endif
mfspr r11, SPRN_M_TW /* Get level 1 table base address */
- beq 3f
+ BRANCH_UNLESS_KERNEL(3f)
lis r11, (swapper_pg_dir-PAGE_OFFSET)@ha
3:
#ifdef CONFIG_8xx_CPU6
@@ -390,14 +403,14 @@ DataStoreTLBMiss:
mtspr SPRN_SPRG_SCRATCH2, r3
mfcr r3
mfspr r10, SPRN_MD_EPN
- andis. r11, r10, 0x8000
+ IS_KERNEL(r11, r10)
#else
mfcr r10
mfspr r11, SPRN_MD_EPN
- andis. r11, r11, 0x8000
+ IS_KERNEL(r11, r11)
#endif
mfspr r11, SPRN_M_TW /* Get level 1 table base address */
- beq 3f
+ BRANCH_UNLESS_KERNEL(3f)
lis r11, (swapper_pg_dir-PAGE_OFFSET)@ha
3:
#ifdef CONFIG_8xx_CPU6
@@ -536,9 +549,9 @@ FixupDAR:/* Entry point for dcbx workaround. */
mtspr SPRN_SPRG_SCRATCH2, r10
/* fetch instruction from memory. */
mfspr r10, SPRN_SRR0
- andis. r11, r10, 0x8000 /* Address >= 0x80000000 */
+ IS_KERNEL(r11, r10)
mfspr r11, SPRN_M_TW /* Get level 1 table base address */
- beq 3f
+ BRANCH_UNLESS_KERNEL(3f)
lis r11, (swapper_pg_dir-PAGE_OFFSET)@ha
/* Insert level 1 index */
3: rlwimi r11, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29
--
2.1.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH 11/11] powerpc/8xx: Add support for TASK_SIZE greater than 0x80000000
2014-12-16 15:03 ` Christophe Leroy
@ 2015-01-05 18:21 ` Joakim Tjernlund
-1 siblings, 0 replies; 6+ messages in thread
From: Joakim Tjernlund @ 2015-01-05 18:21 UTC (permalink / raw)
To: christophe.leroy; +Cc: scottwood, paulus, mpe, benh, linux-kernel, linuxppc-dev
On Tue, 2014-12-16 at 16:03 +0100, Christophe Leroy wrote:
> By default, TASK_SIZE is set to 0x80000000 for PPC_8xx, which is most likely
> sufficient for most cases. However, kernel configuration allows to set TASK_SIZE
> to another value, so the 8xx shall handle it.
On 8xx I would be just as happy with not supporting different TASK_SIZEs, but why not ..
Acked-by: Joakim Tjernlund <joakim.tjernlund@transmode.se>
>
> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
>
> ---
> arch/powerpc/kernel/head_8xx.S | 29 +++++++++++++++++++++--------
> 1 file changed, 21 insertions(+), 8 deletions(-)
>
> diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
> index dbe110e..d380658 100644
> --- a/arch/powerpc/kernel/head_8xx.S
> +++ b/arch/powerpc/kernel/head_8xx.S
> @@ -48,6 +48,19 @@
> mtspr spr, reg
> #endif
>
> +/* Macro to test if an address is a kernel address */
> +#if CONFIG_TASK_SIZE <= 0x80000000
> +#define IS_KERNEL(tmp, addr) \
> + andis. tmp, addr, 0x8000/* Address >= 0x80000000 */
> +#define BRANCH_UNLESS_KERNEL(label) beq label
> +#else
> +#define IS_KERNEL(tmp, addr) \
> + rlwinm tmp, addr, 16, 16, 31;\
> + cmpli cr0, tmp, PAGE_OFFSET >> 16
> +#define BRANCH_UNLESS_KERNEL(label) blt label
> +#endif
> +
> +
> /*
> * Value for the bits that have fixed value in RPN entries.
> * Also used for tagging DAR for DTLBerror.
> @@ -323,15 +336,15 @@ InstructionTLBMiss:
> mfspr r10, SPRN_SRR0/* Get effective address of fault */
> DO_8xx_CPU15(r11, r10)
> mfcr r3
> - andis. r11, r10, 0x8000/* Address >= 0x80000000 */
> + IS_KERNEL(r11, r10)
> #else
> mfspr r11, SPRN_SRR0/* Get effective address of fault */
> DO_8xx_CPU15(r10, r11)
> mfcr r10
> - andis. r11, r11, 0x8000/* Address >= 0x80000000 */
> + IS_KERNEL(r11, r11)
> #endif
> mfspr r11, SPRN_M_TW/* Get level 1 table base address */
> - beq 3f
> + BRANCH_UNLESS_KERNEL(3f)
> lis r11, (swapper_pg_dir-PAGE_OFFSET)@ha
> 3:
> #ifdef CONFIG_8xx_CPU6
> @@ -390,14 +403,14 @@ DataStoreTLBMiss:
> mtspr SPRN_SPRG_SCRATCH2, r3
> mfcr r3
> mfspr r10, SPRN_MD_EPN
> - andis. r11, r10, 0x8000
> + IS_KERNEL(r11, r10)
> #else
> mfcr r10
> mfspr r11, SPRN_MD_EPN
> - andis. r11, r11, 0x8000
> + IS_KERNEL(r11, r11)
> #endif
> mfspr r11, SPRN_M_TW/* Get level 1 table base address */
> - beq 3f
> + BRANCH_UNLESS_KERNEL(3f)
> lis r11, (swapper_pg_dir-PAGE_OFFSET)@ha
> 3:
> #ifdef CONFIG_8xx_CPU6
> @@ -536,9 +549,9 @@ FixupDAR:/* Entry point for dcbx workaround. */
> mtspr SPRN_SPRG_SCRATCH2, r10
> /* fetch instruction from memory. */
> mfspr r10, SPRN_SRR0
> - andis. r11, r10, 0x8000/* Address >= 0x80000000 */
> + IS_KERNEL(r11, r10)
> mfspr r11, SPRN_M_TW/* Get level 1 table base address */
> - beq 3f
> + BRANCH_UNLESS_KERNEL(3f)
> lis r11, (swapper_pg_dir-PAGE_OFFSET)@ha
> /* Insert level 1 index */
> 3: rlwimi r11, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 11/11] powerpc/8xx: Add support for TASK_SIZE greater than 0x80000000
@ 2015-01-05 18:21 ` Joakim Tjernlund
0 siblings, 0 replies; 6+ messages in thread
From: Joakim Tjernlund @ 2015-01-05 18:21 UTC (permalink / raw)
To: christophe.leroy; +Cc: linux-kernel, paulus, scottwood, linuxppc-dev
On Tue, 2014-12-16 at 16:03 +0100, Christophe Leroy wrote:
> By default, TASK_SIZE is set to 0x80000000 for PPC_8xx, which is most lik=
ely
> sufficient for most cases. However, kernel configuration allows to set TA=
SK_SIZE
> to another value, so the 8xx shall handle it.
On 8xx I would be just as happy with not supporting different TASK_SIZEs, b=
ut why not ..
Acked-by: Joakim Tjernlund <joakim.tjernlund@transmode.se>
>=20
> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
>=20
> ---
> arch/powerpc/kernel/head_8xx.S | 29 +++++++++++++++++++++--------
> 1 file changed, 21 insertions(+), 8 deletions(-)
>=20
> diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8x=
x.S
> index dbe110e..d380658 100644
> --- a/arch/powerpc/kernel/head_8xx.S
> +++ b/arch/powerpc/kernel/head_8xx.S
> @@ -48,6 +48,19 @@
> mtspr spr, reg
> #endif
> =20
> +/* Macro to test if an address is a kernel address */
> +#if CONFIG_TASK_SIZE <=3D 0x80000000
> +#define IS_KERNEL(tmp, addr) \
> + andis. tmp, addr, 0x8000/* Address >=3D 0x80000000 */
> +#define BRANCH_UNLESS_KERNEL(label) beq label
> +#else
> +#define IS_KERNEL(tmp, addr) \
> + rlwinm tmp, addr, 16, 16, 31;\
> + cmpli cr0, tmp, PAGE_OFFSET >> 16
> +#define BRANCH_UNLESS_KERNEL(label) blt label
> +#endif
> +
> +
> /*
> * Value for the bits that have fixed value in RPN entries.
> * Also used for tagging DAR for DTLBerror.
> @@ -323,15 +336,15 @@ InstructionTLBMiss:
> mfspr r10, SPRN_SRR0/* Get effective address of fault */
> DO_8xx_CPU15(r11, r10)
> mfcr r3
> - andis. r11, r10, 0x8000/* Address >=3D 0x80000000 */
> + IS_KERNEL(r11, r10)
> #else
> mfspr r11, SPRN_SRR0/* Get effective address of fault */
> DO_8xx_CPU15(r10, r11)
> mfcr r10
> - andis. r11, r11, 0x8000/* Address >=3D 0x80000000 */
> + IS_KERNEL(r11, r11)
> #endif
> mfspr r11, SPRN_M_TW/* Get level 1 table base address */
> - beq 3f
> + BRANCH_UNLESS_KERNEL(3f)
> lis r11, (swapper_pg_dir-PAGE_OFFSET)@ha
> 3:
> #ifdef CONFIG_8xx_CPU6
> @@ -390,14 +403,14 @@ DataStoreTLBMiss:
> mtspr SPRN_SPRG_SCRATCH2, r3
> mfcr r3
> mfspr r10, SPRN_MD_EPN
> - andis. r11, r10, 0x8000
> + IS_KERNEL(r11, r10)
> #else
> mfcr r10
> mfspr r11, SPRN_MD_EPN
> - andis. r11, r11, 0x8000
> + IS_KERNEL(r11, r11)
> #endif
> mfspr r11, SPRN_M_TW/* Get level 1 table base address */
> - beq 3f
> + BRANCH_UNLESS_KERNEL(3f)
> lis r11, (swapper_pg_dir-PAGE_OFFSET)@ha
> 3:
> #ifdef CONFIG_8xx_CPU6
> @@ -536,9 +549,9 @@ FixupDAR:/* Entry point for dcbx workaround. */
> mtspr SPRN_SPRG_SCRATCH2, r10
> /* fetch instruction from memory. */
> mfspr r10, SPRN_SRR0
> - andis. r11, r10, 0x8000/* Address >=3D 0x80000000 */
> + IS_KERNEL(r11, r10)
> mfspr r11, SPRN_M_TW/* Get level 1 table base address */
> - beq 3f
> + BRANCH_UNLESS_KERNEL(3f)
> lis r11, (swapper_pg_dir-PAGE_OFFSET)@ha
> /* Insert level 1 index */
> 3: rlwimi r11, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) =
<< 1, 29=
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 11/11] powerpc/8xx: Add support for TASK_SIZE greater than 0x80000000
@ 2015-04-20 5:26 ` Christophe Leroy
0 siblings, 0 replies; 6+ messages in thread
From: Christophe Leroy @ 2015-04-20 5:26 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman, scottwood
Cc: linux-kernel, linuxppc-dev, Joakim Tjernlund
By default, TASK_SIZE is set to 0x80000000 for PPC_8xx, which is most likely
sufficient for most cases. However, kernel configuration allows to set TASK_SIZE
to another value, so the 8xx shall handle it.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
---
arch/powerpc/kernel/head_8xx.S | 29 +++++++++++++++++++++--------
1 file changed, 21 insertions(+), 8 deletions(-)
diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index dbe110e..d380658 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -48,6 +48,19 @@
mtspr spr, reg
#endif
+/* Macro to test if an address is a kernel address */
+#if CONFIG_TASK_SIZE <= 0x80000000
+#define IS_KERNEL(tmp, addr) \
+ andis. tmp, addr, 0x8000 /* Address >= 0x80000000 */
+#define BRANCH_UNLESS_KERNEL(label) beq label
+#else
+#define IS_KERNEL(tmp, addr) \
+ rlwinm tmp, addr, 16, 16, 31; \
+ cmpli cr0, tmp, PAGE_OFFSET >> 16
+#define BRANCH_UNLESS_KERNEL(label) blt label
+#endif
+
+
/*
* Value for the bits that have fixed value in RPN entries.
* Also used for tagging DAR for DTLBerror.
@@ -323,15 +336,15 @@ InstructionTLBMiss:
mfspr r10, SPRN_SRR0 /* Get effective address of fault */
DO_8xx_CPU15(r11, r10)
mfcr r3
- andis. r11, r10, 0x8000 /* Address >= 0x80000000 */
+ IS_KERNEL(r11, r10)
#else
mfspr r11, SPRN_SRR0 /* Get effective address of fault */
DO_8xx_CPU15(r10, r11)
mfcr r10
- andis. r11, r11, 0x8000 /* Address >= 0x80000000 */
+ IS_KERNEL(r11, r11)
#endif
mfspr r11, SPRN_M_TW /* Get level 1 table base address */
- beq 3f
+ BRANCH_UNLESS_KERNEL(3f)
lis r11, (swapper_pg_dir-PAGE_OFFSET)@ha
3:
#ifdef CONFIG_8xx_CPU6
@@ -390,14 +403,14 @@ DataStoreTLBMiss:
mtspr SPRN_SPRG_SCRATCH2, r3
mfcr r3
mfspr r10, SPRN_MD_EPN
- andis. r11, r10, 0x8000
+ IS_KERNEL(r11, r10)
#else
mfcr r10
mfspr r11, SPRN_MD_EPN
- andis. r11, r11, 0x8000
+ IS_KERNEL(r11, r11)
#endif
mfspr r11, SPRN_M_TW /* Get level 1 table base address */
- beq 3f
+ BRANCH_UNLESS_KERNEL(3f)
lis r11, (swapper_pg_dir-PAGE_OFFSET)@ha
3:
#ifdef CONFIG_8xx_CPU6
@@ -536,9 +549,9 @@ FixupDAR:/* Entry point for dcbx workaround. */
mtspr SPRN_SPRG_SCRATCH2, r10
/* fetch instruction from memory. */
mfspr r10, SPRN_SRR0
- andis. r11, r10, 0x8000 /* Address >= 0x80000000 */
+ IS_KERNEL(r11, r10)
mfspr r11, SPRN_M_TW /* Get level 1 table base address */
- beq 3f
+ BRANCH_UNLESS_KERNEL(3f)
lis r11, (swapper_pg_dir-PAGE_OFFSET)@ha
/* Insert level 1 index */
3: rlwimi r11, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29
--
2.1.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 11/11] powerpc/8xx: Add support for TASK_SIZE greater than 0x80000000
@ 2015-04-20 5:26 ` Christophe Leroy
0 siblings, 0 replies; 6+ messages in thread
From: Christophe Leroy @ 2015-04-20 5:26 UTC (permalink / raw)
To: Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman, scottwood
Cc: linuxppc-dev, linux-kernel
By default, TASK_SIZE is set to 0x80000000 for PPC_8xx, which is most likely
sufficient for most cases. However, kernel configuration allows to set TASK_SIZE
to another value, so the 8xx shall handle it.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
---
arch/powerpc/kernel/head_8xx.S | 29 +++++++++++++++++++++--------
1 file changed, 21 insertions(+), 8 deletions(-)
diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index dbe110e..d380658 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -48,6 +48,19 @@
mtspr spr, reg
#endif
+/* Macro to test if an address is a kernel address */
+#if CONFIG_TASK_SIZE <= 0x80000000
+#define IS_KERNEL(tmp, addr) \
+ andis. tmp, addr, 0x8000 /* Address >= 0x80000000 */
+#define BRANCH_UNLESS_KERNEL(label) beq label
+#else
+#define IS_KERNEL(tmp, addr) \
+ rlwinm tmp, addr, 16, 16, 31; \
+ cmpli cr0, tmp, PAGE_OFFSET >> 16
+#define BRANCH_UNLESS_KERNEL(label) blt label
+#endif
+
+
/*
* Value for the bits that have fixed value in RPN entries.
* Also used for tagging DAR for DTLBerror.
@@ -323,15 +336,15 @@ InstructionTLBMiss:
mfspr r10, SPRN_SRR0 /* Get effective address of fault */
DO_8xx_CPU15(r11, r10)
mfcr r3
- andis. r11, r10, 0x8000 /* Address >= 0x80000000 */
+ IS_KERNEL(r11, r10)
#else
mfspr r11, SPRN_SRR0 /* Get effective address of fault */
DO_8xx_CPU15(r10, r11)
mfcr r10
- andis. r11, r11, 0x8000 /* Address >= 0x80000000 */
+ IS_KERNEL(r11, r11)
#endif
mfspr r11, SPRN_M_TW /* Get level 1 table base address */
- beq 3f
+ BRANCH_UNLESS_KERNEL(3f)
lis r11, (swapper_pg_dir-PAGE_OFFSET)@ha
3:
#ifdef CONFIG_8xx_CPU6
@@ -390,14 +403,14 @@ DataStoreTLBMiss:
mtspr SPRN_SPRG_SCRATCH2, r3
mfcr r3
mfspr r10, SPRN_MD_EPN
- andis. r11, r10, 0x8000
+ IS_KERNEL(r11, r10)
#else
mfcr r10
mfspr r11, SPRN_MD_EPN
- andis. r11, r11, 0x8000
+ IS_KERNEL(r11, r11)
#endif
mfspr r11, SPRN_M_TW /* Get level 1 table base address */
- beq 3f
+ BRANCH_UNLESS_KERNEL(3f)
lis r11, (swapper_pg_dir-PAGE_OFFSET)@ha
3:
#ifdef CONFIG_8xx_CPU6
@@ -536,9 +549,9 @@ FixupDAR:/* Entry point for dcbx workaround. */
mtspr SPRN_SPRG_SCRATCH2, r10
/* fetch instruction from memory. */
mfspr r10, SPRN_SRR0
- andis. r11, r10, 0x8000 /* Address >= 0x80000000 */
+ IS_KERNEL(r11, r10)
mfspr r11, SPRN_M_TW /* Get level 1 table base address */
- beq 3f
+ BRANCH_UNLESS_KERNEL(3f)
lis r11, (swapper_pg_dir-PAGE_OFFSET)@ha
/* Insert level 1 index */
3: rlwimi r11, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29
--
2.1.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
end of thread, other threads:[~2015-04-20 5:27 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-12-16 15:03 [PATCH 11/11] powerpc/8xx: Add support for TASK_SIZE greater than 0x80000000 Christophe Leroy
2014-12-16 15:03 ` Christophe Leroy
2015-01-05 18:21 ` Joakim Tjernlund
2015-01-05 18:21 ` Joakim Tjernlund
2015-04-20 5:26 Christophe Leroy
2015-04-20 5:26 ` Christophe Leroy
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.