From: Codrin Ciubotariu <codrin.ciubotariu@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 08/11] board/T1040qds: T1040 FMAN ports FM1@DTSEC1 and FM1@DTSEC2 have no PHYs
Date: Mon, 12 Jan 2015 14:08:36 +0200 [thread overview]
Message-ID: <1421064519-6248-9-git-send-email-codrin.ciubotariu@freescale.com> (raw)
In-Reply-To: <1421064519-6248-1-git-send-email-codrin.ciubotariu@freescale.com>
Freescale's T1040qds board may be configured to have up to
5 FMAN ports (FM1 at DTSEC1 to FM1 at DTSEC5). From these 5 ports,
2 of them may be fixed-links (FM1 at DTSEC1 annd FM1 at DTSEC2),
connected to other two ports from an intergrated
VSC9953 L2 Switch (switch ports 8 and 9). These fixed-link
ports have no PHYs attatched, so they don't have a
corresponding MDIO.
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com>
---
Changes for v2:
- added patch description;
Changes for v3:
- Removed "Change-id" line from comment;
board/freescale/t1040qds/eth.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/board/freescale/t1040qds/eth.c b/board/freescale/t1040qds/eth.c
index c6fc146..2f8e753 100644
--- a/board/freescale/t1040qds/eth.c
+++ b/board/freescale/t1040qds/eth.c
@@ -478,6 +478,7 @@ int board_eth_init(bd_t *bis)
for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
switch (fm_info_get_enet_if(i)) {
case PHY_INTERFACE_MODE_QSGMII:
+ fm_info_set_mdio(i, NULL);
break;
case PHY_INTERFACE_MODE_SGMII:
t1040_handle_phy_interface_sgmii(i);
--
1.7.11.7
next prev parent reply other threads:[~2015-01-12 12:08 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-12 12:08 [U-Boot] [PATCH v3 00/11] Add driver for VSC9953 Ethernet Switch Codrin Ciubotariu
2015-01-12 12:08 ` [U-Boot] [PATCH v3 01/11] net/fm: Fix error when FMAN MAC has no PHY Codrin Ciubotariu
2015-01-23 0:37 ` York Sun
2015-01-12 12:08 ` [U-Boot] [PATCH v3 02/11] arch/powerpc: Fix mapping of Freescale SerDes protocols Codrin Ciubotariu
2015-01-23 0:38 ` York Sun
2015-01-12 12:08 ` [U-Boot] [PATCH v3 03/11] arch/powerpc: Add SGMII support for the L2 Switch ports Codrin Ciubotariu
2015-01-23 0:39 ` York Sun
2015-01-12 12:08 ` [U-Boot] [PATCH v3 04/11] net/fm: Enable FMAN ports if l2switch ports are connected over SGMII Codrin Ciubotariu
2015-01-23 0:39 ` York Sun
2015-01-12 12:08 ` [U-Boot] [PATCH v3 05/11] net/vsc9953: Add driver for Vitesse VSC9953 L2 Switch IP Codrin Ciubotariu
2015-01-15 20:59 ` York Sun
2015-01-15 21:02 ` York Sun
2015-01-15 21:42 ` Joe Hershberger
2015-01-23 0:40 ` York Sun
2015-01-12 12:08 ` [U-Boot] [PATCH v3 06/11] arch/powerpc: Enable VSC9953 driver on T1040 and T1020 Codrin Ciubotariu
2015-01-15 21:26 ` York Sun
2015-01-12 12:08 ` [U-Boot] [PATCH v3 07/11] board/T1040qds: Fix lane-to-slot mapping for SerDes protocol 0x89 Codrin Ciubotariu
2015-01-23 0:42 ` York Sun
2015-01-12 12:08 ` Codrin Ciubotariu [this message]
2015-01-23 0:42 ` [U-Boot] [PATCH v3 08/11] board/T1040qds: T1040 FMAN ports FM1@DTSEC1 and FM1@DTSEC2 have no PHYs York Sun
2015-01-12 12:08 ` [U-Boot] [PATCH v3 09/11] board/T104xrdb: " Codrin Ciubotariu
2015-01-23 0:43 ` York Sun
2015-01-12 12:08 ` [U-Boot] [PATCH v3 10/11] board/T1040qds: Add VSC9953 support for T1040qds board Codrin Ciubotariu
2015-01-12 12:08 ` [U-Boot] [PATCH v3 11/11] board/T1040rdb: Add VSC9953 support for T1040rdb board Codrin Ciubotariu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1421064519-6248-9-git-send-email-codrin.ciubotariu@freescale.com \
--to=codrin.ciubotariu@freescale.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.